You enter the following command from the service processor; start /HOSTO/console What does
A. Log in to the domain as user root via the console.
B. Log In to the host as user root from another system.
C. Confirm that the boot disk configuration is as expected.
D. Connect to the console from the ACTIVE SP.
A customer has a newly installed SPARC M5-32 platform. After using the HS processes, the
SPs are now configured on their network, and the customer wants to configure the PDomains.
Which two options represent choices that the customer has to set up the platform out of the
A. accessing a Solaris domain on another host and using ipmitoolto assign components to
B. using the Oracle ILOM BUI to assign components to PDomains
C. using Oracle Ops Center to assign components to PDomains
D. using the service processor ILOM command-line interface to assign components to
Answer(s): B, D
You are connection serial and network cables to two SPs located at the front of the server. Your
customer has requested that you set this up to enable 1-GbE network speeds. Which action
would you take?
A. Connect 32 CAT6A cables from the SPO and SP1 SER MGT RJ-45 ports to separate
B. Connect Category 5 cables from the SPO and SP1 SER MGT RJ-45 ports to separate
C. Connect Category 2 cables from the SPO and SP1 SER MGT RJ-45 ports to separate
D. Connect Category 6 (or better) cables and network devices that support 1000BASE-T
networks to separate terminal devices