Adobe AD5-E809 Exam Actual Questions
Adobe Target Business Practitioner Renewal (Page 4 )

• B: Intégrez des résultats de due diligence tels que les évaluations de risque client.

• C: Utilisez des correspondants en aval pour enquêter et signaler les activités suspectes.

• On-Demand: You pay by the hour with no long-term commitment. This is ideal for workloads that are infrequent or have highly variable usage. Since this job runs only 24 hours once per year, you pay only for those 24 hours, with no wasted upfront or long-term payments.
• Reserved Instances: Require a 1- or 3-year commitment and pay for capacity whether you use it or not. For a workload that runs just 24 hours a year, you’d be paying for most of the term unused, making it far less cost-efficient.
• Spot Instances: Can be interrupted whenever AWS needs capacity, which is unacceptable for an uninterruptible workload.
• Dedicated Instances: Generally more expensive and aimed at licensing or compliance requirements; not needed for this use case.

• The correct answer is “Think and work holistically” (Option B).

• Focus on value: ensures outcomes matter to stakeholders, but isn’t specifically about end-to-end delivery.
• Optimize and automate: about efficiency and performance, not the holistic view.
• Collaborate and promote visibility: about teamwork and sharing information, not the end-to-end scope.

• Correct answer: A — The degradation of a service.

• Why: A service request is a formal request from a user for something that is pre-approved and routine (e.g., provisioning a laptop, replacing a toner cartridge). Those are typical service request actions. The degradation of a service, however, is an incident: it describes a problem affecting service quality or availability and is handled by Incident Management (and possibly Problem Management), not as a standard service request.

• Quick note on the other options:

• In Microsoft Teams Phone System, a single Auto Attendant can handle multiple time-based greetings by using separate schedules for office hours, after hours, weekends, and holidays.
• You can configure one Auto Attendant with four distinct greetings mapped to:

• Open the Teams admin center > Voice > Auto attendants, edit or create an Auto Attendant.
• Under Time-based routing, define four rules:

• Create a Holiday schedule with the relevant dates (e.g., Easter, Christmas) and assign the Holiday greeting.
• Save the configuration.

• If your environment cannot separate weekend from after-hours within a single Auto Attendant, you might technically need more than one Auto Attendant.

• A. Configure prompt modifications to enforce tone, disclaimers, and refusal behavior at the system level.

• D. Configure Power Platform DLP policies to restrict unauthorized data connectors.

• B: Manual topic-by-topic disclaimer edits are specifically discouraged.
• C: Channel settings do not replace agent-level Responsible AI controls.
• E: Publishing before enabling safety filters violates the stated deployment sequence. Responsible AI filters should be enabled before publication, not afterward.

• Ensure that only users who manage the production environment sign in to the Azure portal from a hybrid Entra-joined device and authenticate with MFA.

• Use Microsoft Entra ID Protection (Identity Protection) to enforce MFA enrollment:

• Update the existing Capolicy1 (a Conditional Access policy):

• Identity Protection MFA registration policy ensures users are enrolled in MFA (Box 1 choice).
• CA policy Capolicy1 with aGrant control of “Require MFA” enforces MFA during sign-in (Box 2 choice).
• Both work together with the hybrid-joined device requirement to satisfy the authentication/authorization rules.

• Apply the MFA registration policy to the production-management users.
• Apply the MFA grant to Capolicy1 for those same users/groups.

• The question asks why some tasks appear locked in the HR Guided Setup Module’s Task view.
• The options are:

• C) They require other tasks to be completed first. In guided setup flows, tasks are usually gated by prerequisites to ensure proper sequencing and data/configuration dependencies. You typically unlock a task only after the necessary preceding tasks are finished.

• A) Elevated roles can restrict access in some contexts, but guided setup tasks are commonly gated by prerequisites rather than solely by role.
• B) Deprecation isn’t the general pattern for “locked” tasks in the guided setup.
• D) A plugin activation could unlock certain features, but the common gating mechanism is task dependencies, not plugin state.

• The page shows the answer as D, but based on how HR Guided Setup usually works, the more accurate reason is typically C (prerequisites). If you’re studying, treat C as the conceptual answer and be aware the listed key may be incorrect. If you want, I can walk through each option in more detail.

• Answer: A. Use Amazon SageMaker Serverless Inference to deploy the model.

• Why: SageMaker Serverless Inference hosts the model and serves real-time predictions without you provisioning or managing servers. It scales automatically and handles deployment details.

• Why the others aren’t suitable:

• Quick example flow: web app ? SageMaker Serverless Inference endpoint ? model ? response.

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

• Multi-factor authentication
• A secure password change for users whose credentials may be compromised

• Cross-account access is typically implemented with an IAM role. You create a role in the target account (where the resources live) and configure a trust policy that allows principals from the source account to assume that role.
• Users in the source account then assume the role (via Switch Role in the console or STS:AssumeRole) and receive temporary credentials with the role’s permissions to access the resources.

• IAM group: Groups exist inside a single account; they don’t grant cross-account access.
• IAM tag: Tags are metadata and do not grant access.
• IAM Access Analyzer: It analyzes and identifies public or cross-account access but does not grant access itself.

• Basic: Self-help only; no technical support or design assessment.
• Standard: Technical support, but not the full proactive architectural guidance required here.
• Professional Direct: Provides proactive guidance and architecture-related assistance.
• Premier: Also supports this, but is a more expensive, enterprise-level option.

• Custom domains
• 10 GB storage per web app
• Each app runs on dedicated compute
• Load balancing between instances is included
• Costs minimized

• Answer: A (Standard)

• Why:

• Note: In App Service, multiple apps in the same plan share compute resources. If you truly need isolation per app, you’d typically use separate App Service Plans, which increases cost beyond a single Standard plan.

• Correct choices: A and D.

• Why not B, C, or E?

• Primary and core nodes: Use On-Demand Instances because the workload is business-critical. These nodes manage the cluster and store/process HDFS data.
• Task nodes: Use Spot Instances in an instance fleet. Task nodes are suitable for interruption because they do not hold essential cluster data and can be replaced or diversified across instance types.
• Terminate the entire cluster after processing: The job runs only about six hours each morning, and EMRFS stores data in Amazon S3. Keeping the cluster running for the rest of the day would waste money.

• A: Using Spot for primary and core nodes risks interruption of the critical cluster.
• C: All On-Demand is reliable but unnecessarily expensive; terminating the cluster helps, but Spot task nodes provide greater savings.
• D: Leaving primary and core nodes running after the task finishes continues to incur costs. Savings Plans also are less appropriate for this intermittent workload.

• Sustainability is not a CAF perspective (it's not one of the CAF perspectives).
• Performance efficiency and Reliability are pillars of the AWS Well-Architected Framework, not CAF.

• The correct option is B: AWS Storage Gateway.

• Why: The scenario requires backing up on-prem data to AWS without changing existing backup workflows. AWS Storage Gateway provides a hybrid storage solution; specifically, the Tape Gateway emulates a physical tape library, allowing your existing backup software to write to virtual tapes that are stored in AWS (in S3 or S3 Glacier). This lets you back up 10 TB to the cloud while preserving current backup workflows and on-prem infrastructure.

• How it would work: Deploy a gateway appliance or VM on-site, connect your tape-based backup software to the virtual tape library, and start writing to virtual tapes. The data is then archived in AWS, freeing up local storage.

• Why the others aren’t suitable:

• Quick tip: If you weren’t using tape, File Gateway could be another option for file-based backups; Tape Gateway is the right pick for tape-based workflows.

• Answer: B — Improve employee training and awareness

• Why this is correct:

• Why the other options are less effective here:

• Quick practical note:

• IaaS: You deploy and manage virtual machines, operating systems, disks, and networking. Azure manages the physical datacenter and host infrastructure.
• PaaS: Azure manages the operating system and runtime so you can focus on deploying applications, such as with Azure App Service or Azure Functions.
• SaaS: You consume a complete, provider-managed application.

• Automation handles repetitive tasks, and orchestration coordinates responses across tools (SIEM, SOAR, EDR, etc.).
• This allows the security team to process more events with the same number of people, improving throughput and response times.
• Analysts can focus on more complex tasks like investigation and threat hunting instead of manual triage.

• It increases complexity: automation can reduce complexity when well-implemented; complexity is not the main intended benefit.
• It removes technical debt: automation/OR focuses on current incident response efficiency, not primarily on architectural debt.
• It adds additional guard rails: governance is important but not the core value of automation/orchestration within a SIEM.

• Correct answer: Power BI dataset

• The scenario says the data model already contains several measures and you want to create a report from the existing data with minimal development. Reusing a published Power BI dataset lets you inherit the existing measures and data model, so you don’t have to recreate them.
• How to do it: In Power BI Desktop, use the connector Power BI datasets (Get Data > Power BI datasets) and connect to the existing dataset, then build visuals using the pre-defined measures.
• Why the other options are less suitable:

• The explanation states that Traffic Analytics can be enabled by a user with one of these subscription-level roles:

• Question 34 — Network Contributor: Yes
• Question 35 — Owner: Yes
• Question 36 — Reader: Yes, according to the stated explanation and documentation

• Le rôle n’a pas de clés propres. Des identifiants temporaires (via STS) sont émis lorsque quelqu’un ou quelque chose « assume » le rôle.
• La trust policy déclare qui peut assumer le rôle (par ex. une instance EC2, un utilisateur IAM, ou un service comme Lambda).
• Une fois attaché à une ressource (par exemple comme un instance profile sur une EC2), l’application peut appeler les services AWS avec les permissions du rôle.

• Respect du principe du moindre privilège: on accorde uniquement ce qui est nécessaire.
• Pas de stockages de clés sur les instances; les credentials se renouvellent automatiquement.

• Rôles pour EC2, rôles pour Lambda, accès cross-compte, etc.

• Answer: No.

• Why:

• If you need such an assessment while controlling costs, you’d generally pursue a paid MCS engagement or another option outside of the basic Premier entitlement.

• Used for communication on the local link or LAN segment
• Automatically generated on IPv6-enabled interfaces
• Not routed by routers to other networks
• Commonly used by devices to communicate with their local IPv6 router
• Begins with FE80 through FEBF

• FC00::/7 — unique local unicast
• FE80::/10 — link-local unicast
• FF00::/8 — multicast
• 2000::/3 — global unicast

• CAPWAP (Control And Provisioning of Wireless Access Points) creates a tunnel between the AP and the Wireless LAN Controller over the IP network. The AP and WLC communicate via this CAPWAP tunnel, which can traverse Layer 2 or Layer 3 networks.
• The AP does not have to be on the same switch as the WLC. It can connect to any switch in the network, as long as there is IP reachability between the AP and the WLC. This is why option D is correct.
• The other options are incorrect:

• Correct answer: A: The ITIL service value system (SVS).

• The SVS explains how all components (governance, the service value chain, practices, guiding principles, information and technology, partners and resources, and continual improvement) work together to enable value creation from demand to outcomes.

• B: The ITIL guiding principles describe aspirational guidance for decision-making, not how all components/activities interact.
• C: The four dimensions of service management explain areas to consider (organizations/people, information/technology, partners/suppliers, value streams/processes) but don’t describe the integrated system itself.
• D: A service relationship defines the relationship between provider and consumer, not the overall system of components and activities creating value.

• Network Security Groups (NSGs) control network traffic to and from Azure resources.
• By applying NSGs to the web tier and the database tier (subnets or NICs), you can:

• NSGs provide the necessary granularity (source/destination, port, protocol) to enforce the desired traffic patterns between tiers.
• For easier management you can use separate subnets for each tier or, optionally, use Application Security Groups to simplify rule management.

• Why: After listing all resources, you need to assign who is responsible for each task. A RACI chart (Responsible, Accountable, Consulted, Informed) documents these roles for every activity.

• What RACI means:

• Why the others aren’t suitable here:

• Quick example: Task "Create user authentication module" — Responsible: Developer, Accountable: Tech Lead, Consulted: Security Architect, Informed: PM.

• Answer: D

• The strongest security comes from enforcing access at the storage layer. An IAM policy scoped to the Cognito identity prefix restricts each user to their own S3 prefix (folder), so users can only access their own files regardless of client or server code.
• This per-user isolation reduces risk of cross-user data access and is more robust than UI validation or Lambda/API validation alone.
• Implementation note: attach a policy to the Cognito identity role that allows actions on arn:aws:s3:::your-bucket/${cognito-identity.amazonaws.com:sub}/* (per-user prefix). Ensure TLS in transit and enable at-rest encryption (SSE-S3 or SSE-KMS). Use multipart upload for large files up to 300 MB.

• ProductSearchModel.getProductSearchHits() — option C
• ProductSearchHit.getRepresentedProducts() — option B

• ProductMgr.queryAllSiteProducts() (A) queries every product in the site, which is heavy and not scalable for large catalogs.
• Category.getProducts() (D) retrieves all products in a category; this can be slow for large categories.
• Using the search model and hits (B and C) leverages the search index, supports paging, and avoids scanning the entire catalog, making it more scalable.

• Quick context: In a three-tier network (Access, Distribution, Core), roles are:

• Why A is correct: The Distribution layer runs Layer 2 and Layer 3 technologies. It often handles VLAN access (L2) and can perform inter-VLAN routing or connect to the core (L3). So it makes sense for the distribution layer to support both L2 and L3.

• Why B is correct: The Core layer is designed to maintain continuous connectivity when devices fail. It is built for high availability and redundancy, providing multiple paths so the network remains reachable even if some components fail.

• Why the others are not correct:

• A. Number ? Decimal — Correct. Salesforce Number fields are represented in Apex as Decimal.
• D. Date/Time ? Datetime — This is correct conceptually, but “Dateline” is not an Apex type. If the option literally says “Dateline,” it is incorrect.
• E. Checkbox ? Boolean — Correct. A checkbox contains true or false.

• Number ? Integer — A Number field maps to Decimal, even when its scale is zero.
• Text Area ? List<String> — A text area maps to a single String, not a list.

• Disabling GPS: Affects location services, not email connectivity.
• Configuring 4G usage only: Does not enable international data access and could prevent connectivity if 4G is unavailable.
• Connecting using a hotspot: Could provide data, but it is not the most direct solution and depends on another network or device.

• A — Add a Path for Stage: A Path lets users update the Opportunity’s Stage directly from the record page, without opening the full edit form. It can also display guidance and key fields.
• B — Use a Kanban list view: Users can move Opportunities between stages by dragging records between columns, which is ideal when Stage is the only field they normally change.

• Answer: A — EC2 Image Builder

• Why: EC2 Image Builder is AWS’s fully managed service designed to automate the creation, testing, and ongoing management of custom EC2 AMIs. It lets you build image pipelines that start from a base image, apply software/components, run tests, and publish/distribute the resulting AMIs across regions or accounts.

• How it works (high level):

• Why not the other options:

• Quick tip: Use EC2 Image Builder to reduce manual image maintenance and drift, and to enforce consistent, tested base images across environments.

• Correct answer: S3 Versioning

• Why the other options aren’t suitable for this protection:

• Quick tip: For enhanced protection, enable Versioning (and consider related features like Object Lock for write-once scenarios in specific compliance cases).

• Key concept: ALE = SLE × ARO

• SLE = $15,000
• Occurrences: 2 in 3 years ? ARO = 2/3 per year ˜ 0.6667

• ALE = $15,000 × 0.6667 ˜ $10,000 per year

• ALE is the expected annual loss, so it averages the losses over each year.
• This helps prioritize risk treatments by comparing ALE to the cost of controls.

• Premium file shares: contoso104 only
• Blob access tiers: contoso101, contoso102, and contoso103

• Premium Azure Files shares require a storage account with the FileStorage account kind. This is a specialized account type and is not used for blob storage.
• Blob access tiers such as Hot, Cool, and—where supported—Archive apply to blob-capable accounts, such as General-purpose v2 or BlobStorage accounts shown in the exhibit.
• contoso104 is therefore excluded from the blob-tier selection because it is the premium Files account.

• A limited lifetime
• Permissions defined by an IAM role or policy
• The ability to access AWS APIs without using long-term IAM user credentials

• Amazon API Gateway — Builds and manages APIs; it does not generally issue AWS credentials for applications.
• IAM users — Usually use long-term credentials, which are less suitable for applications.
• IAM instance profiles — Provide temporary role credentials to applications running on EC2 instances, but are specifically tied to EC2. The broader requirement described is best met by AWS STS.

• Why this is correct: In Azure Virtual Desktop, user access to a host pool is controlled through App Groups. The default app group for a host pool publishes the full desktop, so adding members to that app group grants them sign-in and access to the desktop (and any RemoteApps in that group). This is the standard way to give users access to AVD resources.

• Why the other options are not correct:

• Practical steps (high level):

• Correct answer: C) After installing ES on the search head(s) and running the distributed configuration management tool.

• ES requires the Splunk_TA_ForIndexes.spl add-on on indexers to apply index-time configurations. It should be deployed via the distributed configuration management (DCM) flow after ES is installed on the search heads, so the indexers receive the proper configuration in a controlled, versioned bundle.

• A) Deploying when adding apps to the deployment server isn’t the ES-specific order; it bypasses the ES-instantiated workflow.
• B) Installing Splunk_TA_ForIndexes.spl first isn’t the recommended order; ES needs to be installed on the search heads first.
• D) It isn’t limited to indexer cluster sites or cluster master commands; the standard flow uses DCM to push the TA to indexers in general.

• Incidents & alerts — see how the phishing activity was detected, correlated, and investigated.
• Threat Explorer — search for the malicious messages, recipients, URLs, attachments, and campaign activity.
• Email and collaboration reports — assess how many users or messages were affected.
• Remediation details — verify whether messages were quarantined, removed, or otherwise contained.

• Microsoft 365 admin center — general tenant administration.
• Microsoft Entra admin center — identity and access management.
• Exchange admin center — mail-flow and Exchange configuration, rather than full phishing-incident investigation.

• The answer: Question 51: C — Request trigger.

• To invoke a Logic App from an external service (here, the Azure Application Insights availability test) you need a trigger that starts on an incoming HTTP request. In Logic Apps, this is the trigger that exposes an HTTP endpoint — typically shown as "When a HTTP request is received" and referred to as the Request trigger.
• The other options aren’t appropriate:

• Create a Logic App with the Request trigger to generate a URL.
• Configure Application Insights to post the degraded-availability payload to that URL.
• Add actions (e.g., send email, follow-up) in the Logic App to notify the customer services team.

• cloud applications only
• all Web traffic including cloud applications

• Cloud applications only: Only traffic to cloud apps is steered to Netskope for inspection/enforcement; other traffic bypasses.
• All Web traffic including cloud applications: All web-bound traffic, including cloud app traffic, is steered to Netskope.

• Browser isolation, Web traffic only, or a vague “traffic only” option are not the standard two steering modes.
• These two configurations let you decide what traffic Netskope analyzes in real time and what is bypassed.

• The “Answer(s)” field lists B and C (likely incorrect). The explanatory text correctly describes cloud applications only and all Web traffic including cloud applications as the two configurations.

• Sales Processes define the set of Opportunity stages for a given workflow.
• Record Types let you have different data models (different fields and picklist values) on the same object.
• Page Layouts control which fields are shown/required for each record type.

• Create three Sales Processes so each team can use its own stages.
• Create three Record Types so each team has its own fields and picklist values.
• Create three Page Layouts so each record type shows the appropriate fields.

• What the dataflow options mean:

• Why C fits best:

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• Residual neural network (ResNet): Primarily used for computer vision tasks such as image classification.
• Support vector machine (SVM): Commonly used for classification and regression, not natural-language query generation.
• WaveNet: Designed mainly for generating or modeling audio and speech.