Which of the following characteristics of cloud-based IT resources are difficult to fully test on Software-as-a-Service (SaaS) implementations? SELECT ALL THAT APPLY

availability
confidentiality
reliability
performance

Answer(s): A,C

Show Answer Next Question

QUESTION: 9

Which of the following statements are true about the state management database mechanism? SELECT ALL THAT APPLY

Software programs can off-load state data to a state management database in order to reduce the amount of runtime memory they consume.
The use of a state management database can improve scalability.
State management databases rely on the use of virtualization software.
The use of state management databases requires a ready-made environment.

Answer(s): A,B

Show Answer Next Question

QUESTION: 10

With cloud storage, consumers only pay for the actual storage they use. Select the correct answer.

True
False

Answer(s): A

Show Answer Next Question

Download PDF Next Page

Viewing page 7 of 19
Viewing questions 31 - 35 out of 90 questions

Post your Comments and Discuss Arcitura Education C90.02 exam prep with other Community members:

Comments:

Name:

C90.02 Exam Discussions & Posts
C90.02 AI Verifications

Prince Asamoah on: February 14, 2024
Great and relevant questions
Anonymous

Paulo Morgado on: July 07, 2026
Good quality questions, recommended!
Lisbon, Portugal

DataCenter_Dan on: April 26, 2026
The AI Assistant provided some relief but braindumps were essential to make it through this exam. I'd read it was very hard and they weren't lying.
Belgium

weekendwarriorw on: May 11, 2026
Wasn't sure I'd make it through this exam but the AI Assistant and braindumps helped manage the pressure. The real exam questions felt very hard and required all the prep I could get.
South Korea

k8s_kevin on: May 13, 2026
Relied heavily on braindumps adn the AI Assistant because this exam felt impossible. It was very hard but I finally managed to pass.
United States

4wscert on: July 09, 2026
Three weeks of prep with braindumps and the AI Assistant finally paid off despite doubting I’d make it through this challenging exam. Real exam questions matched well but it was still very hard.
Rwanda

jakob_vmware on: July 09, 2026
The braindumps were a last resort after nearly throwing in the towel on this exam. Real exam questions thankfully matched well enough to scrape through.
Canada

CiscoFan_J on: April 28, 2026
The real exam questions caught me off guard despite going through tons of braindumps so this exam was very hard for me. Thought the AI Assistant might help more but the exam was a different beast entirely.
Indonesia

sidehustlesysadmin on: July 21, 2026
This exam covered more topics than I expected which threw me off a bit. The materials were still pretty useful thanks to the relevant questions and solid explanations on this site.
Italy

Imad Hamdan on: July 27, 2026
Question #8: AI shows "A" is the correct answer while you have "B" Question #10: AI shows "D" is the correct answer, and you have "A"
Charlotte, United States

netm4p_n on: June 04, 2026
Took two attempts but the exam dumps saved me since it was a very hard test. The exhaustion is real but it's finally over.
Norway

CertStack2026 on: May 18, 2026
Started a bit slow but picked up the pace after reviewing with the practice questions. Took more time to review than I expected. Passed though so it was worth it in the end.
Israel

laylaituae on: August 01, 2026
Was pretty worried about taking this exam because I didn’t feel ready at all. Practice questions on this website helped me fill in the gaps and get more confident.
United Kingdom

FourthTimesFine on: June 18, 2026
Finally done with this exam after trying everything from braindumps to the AI Assistant. It's very hard and took more effort than expected but real exam questions helped a lot in the end.
Turkey

WrongAnswerRight on: June 18, 2026
This exam was very hard and the braindumps were my last resort after numerous attempts. The AI Assistant helped understand real exam questions better.
Hong Kong

chrisinfosec on: May 18, 2026
This exam was tough but those practice questions really helped me get through it.
Saudi Arabia

TheCertMachine on: April 29, 2026
I was really unsure about taking the exam initially, but using the practice questions helped clarify a lot. With consistent work through this website, my understanding got way better over time.
Australia

pkttracerm on: May 15, 2026
Misjudged this exam and had to dive deep into exam dumps to scrape by. Real exam quetions were far tougher than expected.
Estonia

PaperCCNA on: June 28, 2026
I wasn't sure I could handle this exam at first but those practice questions made things click.
Ukraine

tryhardtechie on: June 12, 2026
I was really unsure about the exam at first but using the practice questions on this website made a big difference. They were relevant and got me feeling more prepared over time.
Ireland

scriptsandcerts on: July 09, 2026
Thought this exam would be easy but it was very hard and I had to rely on brain dumps to finally pass.
Indonesia

sam_azure_guy on: July 08, 2026
The AI Assistant helped when the braindumps weren't answering all my questions. This exam felt very hard until I found those resources.
Sweden

flashcardfanatic on: May 19, 2026
Three weeks of juggling work and studying for this exam was exhausting but the exam dumps really helped. Very hard questions all the way through.
Japan

k8s_kevin on: May 04, 2026
Finally done with this exam but it took a toll on me because the real exam questions were very hard despite using the braindumps.
Belgium

tcpdump_t on: May 13, 2026
The exam dumps were okay but the real exam questions caught me off guard. This was a very hard and challenging exam.
UAE

gitadataeng on: June 01, 2026
Didn't expect this exam to be so challenging so I had to spend long nights with the exam dumps. The brain dumps definitely covered some real exam questions which made a difference in the end.
China

dockerdave on: June 20, 2026
At first I wasn’t feeling super confident about this exam but the practice questions on this website really helped me learn. Going over them again and again made a big difference in understanding what I needed to focus on.
Saudi Arabia

CertHunter on: May 20, 2026
This exam was harder than expected but using the practice questions on this website made it manageable.
Australia

PingOfDeath_P on: July 02, 2026
The exam was very hard and relied heavily on exam dumps and real exam questions to finally pass.
United States

5igmas on: May 22, 2026
Three weeks of prep and the brain dumps still didn't cover some real exam questions. It was a very hard and challenging exam that caught me off guard.
Argentina

YoutubeAndPray on: July 09, 2026
Very hard to get through this exam but the braindumps were a big help. Without the exam dumps I doubt I would have cleared it.
Lithuania

FortinetFred on: June 12, 2026
The exam was tough but the prep on this website really kept me organized.
UAE

ServerlessSid on: August 01, 2026
Balancing work with study was tough but short sessions using the practice questions here helped me a lot. Was so relieved when I finished the exam and felt prepared.
Sweden

CoffeeAndCerts on: May 17, 2026
Initially I felt like my progress was pretty slow with the prep. But taking extra time to review really helped me grasp everything better. Finally passed this exam after a few attempts.
South Africa

chrisinfosec on: May 30, 2026
Honestly the progress was slow at first but that's normal I guess. Gave myself plenty of review time with all those practice questions here. Passed in the end so it was worth it.
Australia

twojobsnosleep on: June 04, 2026
The brain dumps were my last resort after finding this exam very hard. Just thankful the real exam questions weren’t a complete surprise.
UAE

StudyGrind99 on: June 30, 2026
Three weeks of prep and this exam was still very hard. The brain dumps were my last resort after failing once.
India

pkttracer_m on: June 01, 2026
Really underestimated this exam and spent long nights with brain dumps. The real exam questions were tougher than expected.
Israel

rajcloudguru on: July 12, 2026
After long days at work, I could only manage short study sessions for this exam. The practice questions on this website were a lifesaver, and passing feels like such a relief.
Switzerland

itdadof3 on: May 11, 2026
Passed it using braindumps and the AI Assistant but the exam was very hard.
United Kingdom

omar_itpro on: June 20, 2026
Underrated how tough this exm was initially but after grinding through a mountain of exam dumps I got through it. The brain dumps were crucial for understanding the real exam questions.
Philippines

chiara_devsec on: June 06, 2026
The exam was very hard and if I hadn't used exam dumps I think I would still be stuck. Real exam quetions were crucial for my preparation.
Chile

StudyBuddy_Raj on: April 12, 2026
Finished yesterday and found this exam very hard but the exam dumps were a huge help. Real exam questions require a lot of focus and time.
Ireland

SleepDeprivedPass on: May 18, 2026
Three weeks of slogging through brain dumps and still barely passed this exam. The real exam questions were a lot harder than expected.
Thailand

laidoffleveled on: June 06, 2026
After long workdays it was tough to squeeze in study time for this exam. The practice questions on this website made it easier and passing felt like such a relief.
Brazil

dmitri_linuxpro on: April 25, 2026
After weeks of tackling brain dumps for this exm the stress was palpable but managed a pass eventually with some help from the real exam questions.
Turkey

lenaciscolab on: May 24, 2026
This exam had way more content than I expected and it was a bit overwhelming. But the exam prep on this site covered all the necessary topics so it helped me get through it.
Germany

sith on: July 17, 2026
Can anyone confrim, if these are the actual exam questions ?
Ancaster, Canada

xCertx on: May 08, 2026
Spent hours with braindumps but the AI Assistant really guided me through the challenging exam. Just managed to pass and it wasn’t easy.
Estonia

t1_support_guy on: July 06, 2026
Passed it using exam dumps after several late nights since this exam was very hard. The endless brain dumps were my main study method.
Italy

AI Explanation - verified by User1075 on: July 20, 2026
Which of the following is an advantage of using VDI? Authentication is not required on a domain. Licensing costs are minimized. Less manual configuration is needed for each workstation. A virus is automatically contained locally.
C. Less manual configuration is needed for each workstation.
Explanation: In a VDI environment, desktops run from centralized images on the server. Updates to the base image apply to all virtual desktops, reducing per-workstation configuration. The other options are not reliable advantages of VDI: authentication still occurs on a domain, licensing can be complex/not minimized, and viruses aren’t automatically contained locally.
Indpls, United States

AI Explanation - verified by User7022 on: July 16, 2026
Question 126:

Answer: No.

Why it doesn’t meet the goal:

- To analyze sales over time using three date fields (Due Date, Order Date, Delivery Date) you typically model role-playing date dimensions. That usually means three date tables and careful relationship management, not one date table renamed and two additional calculated tables. - The proposed solution sets active relationships between Sales and each date table. If more than one relationship is active between the same fact table and multiple date dimensions, filter propagation can become ambiguous and yield incorrect results. The standard approach is to create three date tables and keep relationships inactive (except one active per pair of tables) and then use DAX with USERELATIONSHIP to activate the appropriate relationship in measures. - Creating Order Date and Delivery Date as calculated tables is not ideal for dimension tables. It’s better to duplicate the date table (as separate date dimensions) or use a single date table with role-playing relationships, rather than creating calculated tables for dimensions.

How to implement correctly (brief guidance):

- Create three date dimension copies (one for each date role) or use a single date table with inactive relationships to the Sales table on DueDate, OrderDate, and DeliveryDate. - Use measures with USERELATIONSHIP to switch context between the date roles when calculating visuals.
Warsaw, Poland

AI Explanation - verified by User5630 on: July 29, 2026
Question 51:

The answer: Question 51: C — Request trigger.

Why:

To invoke a Logic App from an external service (here, the Azure Application Insights availability test) you need a trigger that starts on an incoming HTTP request. In Logic Apps, this is the trigger that exposes an HTTP endpoint — typically shown as "When a HTTP request is received" and referred to as the Request trigger.

The other options aren’t appropriate:

- HTTP webhook trigger is for webhook-style callbacks with a handshake and isn’t the standard inbound trigger for a simple HTTP POST. - HTTP trigger is not the commonly exposed inbound trigger in Logic Apps; the inbound trigger is the Request (When a HTTP request is received). - ApiConnection trigger is used to start a flow via a specific connector, not for generic external HTTP events.
How it works in practice:

Create a Logic App with the Request trigger to generate a URL.

Configure Application Insights to post the degraded-availability payload to that URL.

Add actions (e.g., send email, follow-up) in the Logic App to notify the customer services team.

Mumbai, India

AI Explanation - verified by User6589 on: August 03, 2026
Question 8:
Question 8 asks which improvement opportunity found at baseline can contribute to process maturity and strengthen the customer’s overall security posture.

Post-Incident Review (A) is the after-action step used to capture lessons learned, identify process gaps, and drive improvements across the incident response lifecycle. This directly supports process maturity and a stronger security posture.

Incident Analysis (D) focuses on investigating root causes during/after an incident, which is important but more of a diagnostic activity than a standalone baseline improvement to maturity.

Fast Eradication (B) and Incident Containment (C) are tactical actions aimed at stopping the incident, not on maturing the process.

Note: The page lists D as the answer and the reference link seems unrelated to this question, which suggests an error in the provided key. Based on typical ServiceNow security incident objectives around continuous improvement, Post-Incident Review (A) is the better fit.
Hyderabad, India

AI Explanation - verified by User9656 on: August 05, 2026
Question 38:
Yes.
Why: The problem describes a column with case-sensitive data in a DirectQuery model, where undefined values and errors can arise from case mismatches during joins or lookups. By normalizing casing (convert all values to a single case, e.g., all upper or all lower) you ensure consistent key values across the data model. This reduces mismatches and the resulting undefined values or errors.
How to implement:

In the source query: apply UPPER() or LOWER() to the column.

In Power Query Editor: use Text.Upper or Text.Lower on the column, then load.

Notes:

This fixes the root cause when comparisons/joins depend on case.

In DirectQuery, transformations are pushed to the source or query layer; ensure the transformation is supported by your data source/connector.

After normalization, verify relationships and any downstream visuals that rely on that column.

Lagos, Nigeria

AI Explanation - verified by phola.qwalana on: July 15, 2026
Question 370:
Correct choice: A — logging host 10.10.10.1 transport tcp port 1024
Why:

Requirements map to this: send to syslog server at 10.10.10.1, use a reliable protocol (TCP), and avoid well-known ports (0–1023). Port 1024 is the first non–well-known port, so it satisfies the non–well-known requirement.

Why the others are wrong:

- B uses UDP (not reliable) with port 1024, so reliability criterion isn’t met. - C uses UDP with port 1023, which is a well-known port (0–1023), violating the “no well-known ports” rule. - D uses a transport option that isn’t a valid way to specify TCP/UDP for syslog in this context (origin-id is not a transport selection).
Key concept:

TCP provides reliability for syslog delivery, unlike UDP.

Port numbers in the 0–1023 range are well-known ports; using 1024+ avoids the well-known range.

Cape Town, South Africa

AI Explanation - verified by User7847 on: July 06, 2026
Question 56:
Correct answer: B) Product owner reviews backlog refinement processes.

Why B is correct: The root cause is unclear requirements. Backlog refinement (grooming) helps ensure items are well-defined, with clear acceptance criteria and small, estimable chunks. The Product Owner owns the backlog, so improving refinement directly addresses the lack of clarity and helps the team plan and complete iterations more reliably.

Why the other options are less appropriate:

- A: Reviewing iteration length with stakeholders may help scheduling, but it doesn’t fix the underlying unclear requirements. - C: Limiting work in progress can improve flow, but it doesn’t resolve unclear requirements driving unfinished work. - D: Reviewing individual performance doesn’t tackle the systemic issue of unclear requirements.

Practical tie-in: Encourage a strong Definition of Ready in refinement sessions, so backlog items entering each sprint/iteration are clear, scoped, and testable.

Riga, Latvia

AI Explanation - verified by User3575 on: August 05, 2026
Question 3:
I can’t see the interactive hot spot image, so I can’t tell which host to click. But here’s how Question 3 is meant to be approached and why.

Goal: Identify the host that originated the infection, then label each remaining host as infected or clean based on log evidence.

Logs to review (across hosts and firewall):

- Firewall/NIDS/IPS logs for unusual outbound connections, new ports, or unusual destinations. - DNS logs for suspicious domains or rapid repeat queries. - Host event logs (process creation, network connections, user logons). - Endpoint security logs/EDR for malware indicators or beaconing. - Proxy logs for unusual external access from internal hosts.

How to identify the origin:

- Look for the earliest, abnormal activity that could seed the infection (e.g., a host contacting a known bad IP/domain, or a suspicious file dropped on initial access). - Correlate time stamps across hosts to find a common point of compromise. - Detect signs of lateral movement starting from that origin (e.g., anomalous SMB/RDP activity).

How to classify other hosts:

- Infected: hosts showing correlated indicators (beaconing, same C2 domain, shared tooling, new/unknown processes). - Clean: hosts with no anomalies and no connections to the same malicious indicators in the same time window.

Quick tip: use the Reset All option if you want to re-run the scenario and practice again.

If you describe which hosts/firewalls show what in the logs, I can help reason through which one is likely the origin and which hosts are infected or clean.
Norcross, United States

AI Explanation - verified by nanrany on: July 30, 2026
Question 317:
The correct answer is C: Amazon FSx for Windows File Server.
Why:

The requirement is a fully managed file server that natively supports Microsoft workloads and file systems and uses the SMB protocol. FSx for Windows File Server is built specifically for Windows workloads, provides native SMB file shares, and supports Windows permissions/Active Directory integration.

Why the others don’t fit:

- Amazon EFS is a fully managed NFS file system, mainly for Linux workloads, and does not provide Windows SMB support. - FSx for Lustre is a high-performance parallel file system optimized for HPC workloads, not Windows SMB shares. - Amazon EBS is block storage attached to EC2 instances, not a file server.
In short, FSx for Windows File Server gives you a managed Windows-based file server with SMB out of the box, meeting the stated requirements.
Busan, South Korea

AI Explanation - verified by User7841 on: July 10, 2026
Il fatto di avere una tabella di metatadati cosa comporta , me los pighi
Una tabella di metadati significa che memorizzi solo le informazioni sui file (es. nome, percorso, estensione, data di modifica) senza i contenuti JSON. Ecco cosa comporta:

Dimensione e prestazioni: dataset molto piccolo, refresh rapidi e minor consumo di memoria, perché non carichi i contenuti dei file.

Aggiornamento e coerenza: la tabella riflette l’“inventario” dei file. se aggiungi/elimini file nella cartella, i metadati si aggiornano al prossimo refresh.

Scopo analitico: puoi creare metriche sul livello dei file (numero di file per estensione, per data, per cartella, file più recenti, ecc.), ma non puoi analizzare i dati all’interno dei JSON.

Limitazioni: non puoi estrarre o aggregare campi presenti nei JSON perché non vengono caricati; se serve analizzare il contenuto, devi caricare i dati reali (in modo controllato).

Sicurezza e governance: visibilità sulla struttura e sulla disponibilità dei file, ma attenzione a esporre percorsi/nomi sensibili.

Implementazione pratica: in Power Query rimuovi la colonna Content dopo aver usato Folder; pianifica refresh per tenere aggiornato l’inventario senza leggere i contenuti.

Rome, Italy

AI Explanation - verified by User4084 on: August 03, 2026
no ans showing is premier. why? if developer .standard,prof direct can also take new request, then why only premier
You’re right to question that. Based on current Azure support plans:

Basic: billing/subscription support only; no technical support requests can be opened.

Developer, Standard, Professional Direct, and Premier: include technical support and allow opening new support requests.

So the correct set of plans that allow new support requests is all four paid plans, not just Premier. If your material shows only Premier as the answer, that’s likely an error in the answer key or outdated material.
What to do:

If option A corresponds to “Developer, Standard, Professional Direct, Premier,” that is the correct choice.

If the option text is really “Premier only,” that would be incorrect per current Azure docs.

Official reference: Azure support plans page (Basics vs. paid plans). If you want, I can walk through the wording of the plan descriptions to pinpoint exactly where this inconsistency lies.
Stockton-On-Tees, United Kingdom

AI Explanation - verified by User9569 on: August 02, 2026
Question 3:

Correct answer: Power BI dataset

Explanation:

The scenario says the data model already contains several measures and you want to create a report from the existing data with minimal development. Reusing a published Power BI dataset lets you inherit the existing measures and data model, so you don’t have to recreate them.

How to do it: In Power BI Desktop, use the connector Power BI datasets (Get Data > Power BI datasets) and connect to the existing dataset, then build visuals using the pre-defined measures.

Why the other options are less suitable:

- SharePoint folder would require importing the Excel data again and rebuilding measures. - Power BI dataflows are for data ingestion pipelines, not for leveraging an existing report’s data model directly. - Excel workbook would reimport data and likely require re-creating the model and measures.
Kuala Lumpur, Malaysia

AI Explanation - verified by buhle255 on: July 20, 2026
Question 22:
The correct answer is: Assign AVDusers to the application group.

Why this is correct: In Azure Virtual Desktop, user access to a host pool is controlled through App Groups. The default app group for a host pool publishes the full desktop, so adding members to that app group grants them sign-in and access to the desktop (and any RemoteApps in that group). This is the standard way to give users access to AVD resources.

Why the other options are not correct:

- On each session host, add AVDusers to the local Remote Desktop Users group: Not the recommended or scalable method in AVD; access is managed via App Groups and Azure AD, not local machine groups. - Assign AVDusers to an Azure role scoped to the host pool (or to the session hosts): These are management RBAC roles, not user session access roles. They control who can manage the host pool, not who can sign in and use it.

Practical steps (high level):

- In the Azure portal, go to your host pool > Application groups > Desktop (or create one). - Add AVDusers to the Application Group's assignments. - Optionally create a separate RemoteApp group and assign users there if you want app-specific access.
This aligns with the standard AVD access model and the note that the default Desktop app group already published the desktop to users you assign.
Johannesburg, South Africa

AI Explanation - verified by User2736 on: August 05, 2026
Question 17:
Question 17 is about making sure deployment logs can be collected when a Windows Autopilot/Intune deployment fails.

The correct setting to configure is the Enrollment Status Page (ESP) profile.

Why: ESP tracks the enrollment progress and logs during Autopilot provisioning. You can enable log collection within the ESP policy so that, if ESP times out, the user can collect and share the logs with support.

Optional enhancement: In the ESP policy (or the Autopilot diagnostics settings), you can enable:

- “Show app and profile configuration progress” (Yes) - “Turn on log collection and diagnostics page for end users” (Yes) - This provides more detailed troubleshooting information from the Autopilot diagnostics page on Windows 11.
What the other options do not address:

Automatic enrollment settings: control how devices auto-enroll, not log collection.

Windows Autopilot deployment profile: controls deployment steps but not ESP log collection.

Device configuration profile: applies settings but doesn’t provide ESP log collection mechanics.

In short: configure the ESP profile and enable log collection (and optionally diagnostics) to collect logs when deployments fail.
Bengaluru, India

AI Explanation - verified by User5321 on: July 21, 2026
So when you make the image on prem all you're really doing is making a vhd, then you upload that vhd and then add-azimage targetting that vhd after?
Yes, that’s the right mental model.

On-prem you generalize and capture the VM as a VHD.

Upload the VHD to Azure with Add-AzVhd.

Register the VHD as an image in Azure with Add-AzImage (or New-AzImage) so it appears as a selectable image.

Create new VMs from that image (e.g., with New-AzVM -Image ...).

So the flow is: VHD created on-prem ? upload via Add-AzVhd ? create/register image via Add-AzImage ? deploy VMs from that image. The exam answer for the upload step is Add-AzVhd, but you’ll typically follow with Add-AzImage to actually use it as an image.
Rotherham, United Kingdom

AI Explanation - verified by aditya.rathore on: August 04, 2026
Question 10:
Here’s a concise explanation of Question 10.

Correct answer: A

What this is saying: You need to write a Transact-SQL query that uses REGEXP_SUBSTR to extract the ID from MessageText, and you should apply STRING_ESCAPE(MessageText, 'json') before calling REGEXP_SUBSTR.

Why A is correct:

MessageText may contain JSON characters (quotes, backslashes, etc.). Escaping the JSON content first ensures the string you pass to the regex is safe and won’t confuse the regex engine.

The pattern you apply with REGEXP_SUBSTR would then extract the first substring that matches your ID pattern from the (escaped) text.

How you’d typically use it:

Example (conceptual):

- SELECT REGEXP_SUBSTR(STRING_ESCAPE(MessageText, 'json'), '<ID_REGEX_PATTERN>') AS ID - Replace <ID_REGEX_PATTERN> with the actual regex that matches your ID (e.g., an alphanumeric pattern).
Notes:

The question implies REGEXP_SUBSTR is available in this environment; some SQL Server and Fabric contexts don’t expose it natively in all versions. If REGEXP_SUBSTR isn’t available, you’d need an alternative approach (e.g., using built-in regex-like capabilities or CLR/UDFs).

If you need the ID specifically from the first paragraph, you might first isolate the first paragraph and then apply REGEXP_SUBSTR, or compose a single pattern that anchors to the first paragraph.

Mumbai, India

AI Explanation - verified by User1184 on: July 20, 2026
Question 27:
La bonne réponse est: Below-the-line (option C).
Explication rapide:

Problème: le système d’alertes signale des fluctuations tout en manquant les activités qui restent anormalement constantes sur une période longue. Il faut donc un scénario qui capte les anomalies qui se maintiennent dans le temps plutôt que les pics ponctuels.

Peer: permet de comparer un client à ses pairs; utile pour repérer des écarts relatifs, mais ne cible pas nécessairement les motifs d’anomalie persistante sur plusieurs périodes.

Revenus mapping: relie les transactions à des sources ou flux de revenus; utile pour l’analyse des fonds, mais pas directement pour détecter une anomalie longue durée.

Below-the-line: conçu pour détecter des activités qui passent en dessous des seuils habituels ou qui demeurent anormales sur une longue période, comblant ainsi la faiblesse des alertes à long terme.

En résumé, un scénario « Below-the-line » aide à identifier et déclencher des alertes lorsque l’activité est systématiquement anormale sur une longue période, ce qui répond directement à la faiblesse décrite. Note: la terminologie peut varier selon la plateforme; assurez-vous de comprendre comment votre outil définit ce type de scénario.
Lomé, Togo

AI Explanation - verified by User1740 on: July 07, 2026
Question 12:
The correct answer is AWS Service Catalog.

Why: It lets an organization publish and govern a catalog of IT services and infrastructure "products" for end users. Each product is typically defined by an IaC template (for example, a CloudFormation template), and you can enforce approvals, access controls, and constraints to ensure only approved configurations are deployed. This directly supports governance of deployed IT services and IaC templates.

Why not the others:

- AWS Resource Explorer: used for discovering resources across accounts, not for governance of IaC templates. - AWS Organizations: good for multi-account governance and policy management, but not for managing and governing IaC templates themselves. - AWS Systems Manager: focuses on operational management, automation, and patching, not on central governance of IaC templates.
Would you like a quick walkthrough of how to set up a simple product in Service Catalog using a CloudFormation template?
Rawalpindi, Pakistan

AI Explanation - verified by anagabrielabfg on: July 04, 2026
Question 146:

The answer is D: Privacy Impact Assessment (PIA).

Why:

You’re planning a new processing operation: digitizing paper records containing personal data, uploading them to a third-party tool, and merging with data from other apps. This introduces new privacy risks (data sharing, cross-system processing, potential scope expansion) that need formal assessment before implementation.

A PIA systematically evaluates processing activities, identifies privacy risks, and documents mitigations (data flows, purposes, legal basis, roles, retention, security, vendor arrangements, etc.). It helps ensure compliance and informs decision-making.

What a PIA typically covers:

Scope and purposes of processing

Data categories and flows (including third-party recipients)

Roles (controller vs. processor) and responsibilities

Legal basis and data minimization

Security measures and access controls

Retention periods and destruction

Risk identification and mitigations

Governance, accountability, and, if applicable, vendor due diligence and data-sharing agreements

Why not the others:

Record of Authority documents who can approve changes, not a privacy risk assessment.

Personal Data Inventory helps map data, but doesn’t evaluate privacy risks.

PTA is a screening tool to decide if a DPIA/PIA is needed, not the full assessment itself.

Curitiba, Brazil

AI Explanation - verified by User8274 on: July 13, 2026
Question 5:

Correct answer: D and E (Permanent table and Materialized view)

Why: Time Travel and Fail-safe apply to permanent objects and materialized views. If a permanent object or a materialized view is dropped, you can recover it within the Time Travel retention period; after that, Snowflake’s Fail-safe provides a further, limited recovery window.

Why the others are incorrect:

- A (View): Regular views aren’t listed as recoverable in this context; Time TravelRecovery is associated with permanent objects and materialized views. - B (Transient table) and C (Temporary table): Transient/temporary objects do not generally support Time Travel recovery after drop.
Panipat, India

AI Explanation - verified by User9994 on: July 14, 2026
Question 2:

RPO and RTO definitions:

- RPO (Recovery Point Objective): you can tolerate losing up to 2 hours of data. - RTO (Recovery Time Objective): you must restore service within 10 minutes.

Why B and D meet these goals:

- B. Amazon Aurora Global Database in two Regions: provides cross-region replication with very small lag. The 2-hour RPO is easily met because data is replicated across regions quickly. In a disaster, you can promote the secondary region to master, achieving a short RTO. - D. Two-region deployment with Route 53 failover and Auto Scaling Groups: ensures the app tier can switch to a healthy region quickly. Route 53 health checks direct traffic to the healthy region, and pre-provisioned ASGs maintain capacity, meeting the 10-minute RTO.

How they complement each other:

- Data layer (B) handles RPO, ensuring recent data is available in the failover region. - Compute layer (D) handles RTO, ensuring application endpoints are routed to a ready, scaled region quickly.

Quick tips:

- Use a low Route 53 TTL for fast DNS failover. - Regularly test cross-region failover and promotion processes.
Johannesburg, South Africa

AI Explanation - verified by anagabrielabfg on: July 04, 2026
Question 126:
The correct answer is C: “As the parent company, it should have ensured its existing data access and storage procedures were integrated into PHT's system.”
Why this is correct:

The core issue was governance and oversight. PHT had no owner or formal data-handling procedures, so sensitive data wasn’t protected consistently.

By integrating Pacific Suites’ established data access and storage controls into PHT, the parent would have ensured standardized protections (access controls, retention, encryption where applicable, audits) across both entities.

Why the other options are less appropriate:

A (transferring personnel) addresses staffing but not the underlying policy and control gaps; it’s not a substitute for proper governance.

B (assessing infrastructure and complete network separation) is a strong security measure but doesn’t fix the absence of integrated data-protection procedures and ownership.

D (replacing electronic files with hard copies) is impractical and does not address electronic data protection needs.

Key concept: data governance and responsibility boundaries between parent and subsidiary, ensuring uniform protection across all data-handling processes. If you want, I can relate this to specific IAPP objectives.
Curitiba, Brazil

AI Explanation - verified by User6293 on: July 20, 2026
Question 1:
Here’s the reasoning for Question 1.

The requirement: the support plan must allow opening new support requests (technical support incidents).

Azure’s Basic plan does not include technical support incidents—only billing/subscription support and access to community support.

Therefore, you must choose a paid plan to open new technical support requests: Developer, Standard, Professional Direct, or Premier.

So, the correct choice is the option that lists the paid support plans (excluding Basic). The typical expectation is: “Developer, Standard, Professional Direct, Premier” as eligible plans. If the option labeled “A” corresponds to that list, then A is correct.
San José, Costa Rica

AI Explanation - verified by User2024 on: July 07, 2026
Question 1:

It uses VLAN 1 by default. On an access port, if you don’t specify switchport access vlan, the port belongs to VLAN 1 for untagged data frames.

The concept of a native VLAN applies only to trunk ports. Access ports do not use a native VLAN.

How to verify:

show interfaces GiX switchport ? Administrative Mode: static access; Access VLAN: 1.

If the port were a trunk, you’d see a native VLAN with switchport trunk native vlan X.

Salem, United States

AI Explanation - verified by User5142 on: July 07, 2026
Question 28:
Question 28 explanation:

Correct answer: C

Why: The issue is browser-side cross-origin restrictions. The three subsidiary apps load common assets (JavaScript and web fonts) from a central S3 bucket that has a different origin than the apps. Browsers enforce CORS, so you must configure the central bucket to allow cross-origin requests from the subsidiary domains. Adding a CORS configuration on the central bucket enables the browser to fetch those assets.

Why the other options are not appropriate:

- A: Access Points are for specialized access paths within VPCs or accounts, not for solving cross-origin resource sharing in browsers. - B: A bucket policy controls server-side access, not the browser’s cross-origin headers. It won’t fix CORS from the client. - D: Content-MD5 is for data integrity, not for cross-origin access.

What to configure (high level):

- In the central S3 bucket, set a CORS configuration that allows the subsidiary domains (Origins) to access resources. - Include allowed methods like GET, HEAD, and OPTIONS (for preflight), AllowedHeaders (often *), and optionally ExposeHeaders as needed. - Example gist: allow origins such as https://www.example.com, https://subsidiary1.example.com, etc., with GET, HEAD, OPTIONS.
This e
Kolkata, India

AI Explanation - verified by bitanc29 on: July 20, 2026
Question 185:
Answer: B

The missing piece is to configure an event source mapping between the DynamoDB stream and the Lambda function. Enabling DynamoDB Streams alone doesn’t trigger the function—you must wire the stream to Lambda so events invoke the function.

Note that changing StreamViewType (A) only affects what data is delivered (e.g., NEW_IMAGE) and does not trigger invocations. Options C and D are not required for invocation: you don’t need SNS, and increasing the timeout won’t enable the trigger.

Kolkata, India

AI Explanation - verified by User2024 on: July 07, 2026
So if too long of cable causes FCS/CRC and bad cable can cause FCS/CRC, how do we know what the correct answer is
Answer: A — physical cable fault.
Why: FCS/CRC errors indicate frames are corrupt on the wire, a classic sign of a physical-layer problem. In a data center, a server directly connected to the core switch is unlikely to have a copper run beyond 100 m, so “a cable that is too long” is less plausible. If the link is physically intact but still showing FCS errors, a faulty cable, bad connector, or bad transceiver is the more likely cause.
How to decide in practice:

If topology implies short copper runs (typical DC), favor physical faults over length.

Use show commands: show interfaces [interface] counters errors to confirm FCS/CRC errors.

Troubleshoot: reseat/replace the patch cable, test with a known-good cable, try a different port/transceiver, and inspect connectors.

When a long copper run would be plausible (e.g., actual distance >100 m), then “too long” could be the issue. But given the described DC scenario, A is the best fit.
Salem, United States

AI Explanation - verified by User4280 on: July 22, 2026
Question 6:
Question 6 asks how TCP and UDP establish a connection between two endpoints.
Correct answer: A — TCP uses the three-way handshake, and UDP does not guarantee message delivery.
Why:

TCP is connection-oriented. It establishes a connection before data transfer using a three-way handshake (SYN, SYN-ACK, ACK), enabling reliable delivery, ordering, and flow control.

UDP is connectionless. It sends datagrams without a prior connection and provides no guarantee of delivery, order, or protection against duplicates; any reliability is up to the application.

Why the other options are incorrect:

B incorrectly states UDP uses acknowledgment packets; UDP has no built-in ACKs.

C wrongly claims UDP provides reliable transfer and that TCP is connectionless.

D misstates framing bits; neither protocol uses the listed TCP/UDP handshake bits in frames.

Takeaway: TCP = reliable, connection-oriented with a handshake; UDP = best-effort, connectionless.
San Luis Obispo, United States

AI Explanation - verified by User9454 on: August 05, 2026
Quelle option est une perspective qui inclut les capacités fondamentales de l’AWS Cloud Adoption Framework (AWS CAF) ? Durabilité Efficacité de performance Gouvernance Fiabilité
Gouvernance
Pourquoi: AWS CAF comporte six perspectives (Business, People, Governance, Platform, Security, Operations). Parmi les options, seule « Governance » est une perspective du CAF; les autres termes se réfèrent à des concepts du cadre Well-Architected ou à d’autres domaines.
Yaoundé, Cameroon

AI Explanation - verified by User7777 on: July 31, 2026
Question 44:

Answer: B — Improve employee training and awareness

Why this is correct:

- The issue is users unintentionally exposing sensitive data via file sharing. Training and awareness directly address the human factor, teaching users how to identify sensitive data, share appropriately, and follow policy-driven practices. This reduces misconfigurations and careless sharing.

Why the other options are less effective here:

- A) Implement step-up authentication for administrators targets access control for admins, not the regular user behavior causing data leaks. - C) Increase password complexity helps against credential theft but doesn’t prevent missharing of files. - D) Deploying MDM focuses on device management, not the core problem of user-driven data exposure through file sharing.

Quick practical note:

- In practice, you can combine training with policies and technical controls like DLP or file-sharing permissions to further reduce leakage, but training addresses the primary risk in this scenario.
Subang Jaya, Malaysia

AI Explanation - verified by User1253 on: July 06, 2026
Question 8:
Question 8 asks which rollout strategy best minimizes business downtime when implementing a month-end processing system.
Key options:

Cutover (big bang): switch from old to new in one go; typically causes significant downtime during the switch.

Phased: roll out in stages; downtime is reduced per phase but the total deployment may take longer and complicates integration.

Pilot: deploy to a limited area first; reduces risk but not necessarily the widest downtime impact.

Parallel: run old and new systems side by side for a period; downtime is minimized because business operations can continue on the old system while the new is tested and reconciled.

Why Parallel is best here:

It allows continuous operation during the transition (no single cutover downtime).

Problems can be resolved without halting business processes.

Data reconciliation can occur while both systems run.

Trade-offs: higher cost and effort to maintain two systems temporarily.
Answer: D: Parallel.
Kolkata, India

AI Explanation - verified by sophielargeaudproust on: July 26, 2026
Question 11:

Correct answer: D (Special category data)

Why:

- The system uses behavioral biometric data (typing speed, rhythm, pressure) to create a unique user profile. - When biometric data is used to uniquely identify individuals, it is treated as a special category data under privacy regimes like GDPR due to its sensitivity and impact on privacy. - Because this data can uniquely identify a person, it triggers higher safeguards and stricter processing requirements.

Quick notes:

- If the data were purely non-identifying or anonymized, the classification could be different, but here its purpose is to identify/authenticate a specific person. - Practical implications: ensure a lawful basis for processing, implement data minimization, strong security, and consider additional protections (e.g., explicit consent where required).
Saint-Priest, France

AI Explanation - verified by User2066 on: August 02, 2026
Question 23:
Question 23 asks how to make yearly shipment data (on a custom Shipment object) available on the Account record for the Marketing team, without exposing unnecessary shipment details.
Key concepts:

Use a field on Account to show the aggregated yearly shipments (a Roll-Up Summary).

A Master-Detail relationship between Shipment and Account is required for Roll-Up Summary to work (and to ensure access is governed by the parent Account).

OWD and the relationship type determine what users can see. If you want to restrict shipment-level access while still showing a summary on Account, Private OWD on Shipment plus Master-Detail helps, because access to shipments is controlled by the Account record.

Option-by-option reasoning:

A (Public OWD on Shipment with Process Builder and a Lookup to Account): Not ideal. Public access would expose shipments broadly, and a lookup cannot support a built-in roll-up summary.

B (Private OWD on Shipment, Roll-Up Summary, Master-Detail to Account): Best answer. Private shipments, but because of Master-Detail, access and the roll-up are tied to the Account. The Account can show the yearly total via a Roll-Up Summary field.

C (Controlled by Parent on Shipment, Trigger, Master-Detail): Master-Detail is correct, but using a trigger is unnecessary for a straightforward roll-up; roll-ups are the standard, maintainable solution.

D (Private OWD on Shipment, Trigger, Lookup to Account): More complex and not as efficient; no automatic roll-up, and lookup breaks the ease of summarizing by Account.

Likely correct approach: B (primary). If you must pick two, C could be considered as an alternative approach (Master-Detail with a custom trigger), but B is the recommended, maintainable pattern. Note: the page’s listed answer is D, which conflicts wit
Kolkata, India

AI Explanation - verified by User3707 on: July 11, 2026
Question 7:
Q7: Ce descrie cum componentele ?i activita?ile lucreaza împreuna pentru a facilita crearea de valoare?

Raspuns corect: ITIL service value system (SVS).

De ce: SVS descrie un cadru în care toate componentele ?i activita?ile (principii directoare, guvernan?a, lan?ul de valoare al serviciilor, practicile ?i îmbunata?irea continua) lucreaza împreuna pentru a co-crea valoare cu par?ile interesate.

De ce nu celelalte raspunsuri:

- ITIL guiding principles: ofera orientari, nu modul în care toate componentele interac?ioneaza între ele. - The four dimensions of service management: descriu perspectiva/dimensiunile, nu cum se conecteaza componentele pentru valoare. - A service relationship: este rela?ia dintre furnizor ?i utilizator, nu cadrul care organizeaza interoperabilitatea componentelor.
Pitesti, Romania

AI Explanation - verified by User3976 on: July 24, 2026
Question 15:
Question 15 is about creating a single dataset that contains only metadata for 100 CSV files in a folder, without loading the actual CSV data. The three actions are performed in this order:

Step 1: From Power BI Desktop, select Get Data, choose Folder, enter the folder path, and click OK, then choose Transform data to open Power Query Editor.

- Why: The Folder connector lists every file in the folder and exposes per-file metadata.

Step 2: In Power Query Editor, expand the Attributes column.

- Why: Expanding Attributes reveals per-file metadata (e.g., name, extension, date modified, size) that you can use to build a metadata-only view.

Step 3: From the Power Query Editor, select the Content column and use Home > Combine Files (aka “Combine binaries”) to consolidate the files.

- Why: This action creates a single query that represents all files. If your goal is metadata-only, you load only this final query and disable loading for intermediate steps so the actual CSV data isn’t stored.
Key concept: using the Folder connector plus expanding Attributes and combining binaries lets you derive a single, metadata-focused dataset from many files without pulling in their contents.
Penge, United Kingdom

AI Explanation - verified by User1990 on: July 11, 2026
Question 36:
Question 36 explanation:

Correct answer: A) Zero-day vulnerability

Why:

Routine vulnerability assessments look for vulnerabilities that are already known and cataloged (e.g., CVEs, misconfigurations). A zero-day vulnerability is, by definition, not known yet, so it cannot be reliably discovered by standard vulnerability scans.

Other options:

- Kernel flaw: can be found if it’s already known and in databases, or via kernel-specific tests. - Buffer overflow: can be detected by fuzzing and static/dynamic analysis. - File and directory permissions: can be identified through permission scanning and configuration review.
Note: In real-world practice, anomaly detection or threat hunting could surface unknown issues, but routine vulnerability assessments target known vulnerabilities.
San Diego, United States

AI Explanation - verified by User9941 on: July 24, 2026
Question 8:
Question 8 asks which statements about template BOMs are TRUE. The correct selections are usually A and C.

A) You can only apply a single template BOM to a service object.

- Why this is true: In Dynamics 365, a service item is typically associated with at most one BOM template at a time. You don’t apply multiple templates to the same service object, so this is a true constraint.

C) You can modify or delete lines in a BOM template regardless of whether the template has been associated to a service object, or not.

- Why this is true: BOM templates are editable templates. You can add, modify, or delete lines in the template even if the template has already been linked to a service object. Changes to the template affect future BOMs created from the template, not necessarily existing BOMs.
Why the others are false:

B) You can apply many template BOMs to a service object — false; typically only one template per service object.

D) You can modify/delete lines only if not associated — false; you can modify templates even after association (per C).

Note: Modifying a template may not retroactively change already created BOMs; use caution and test how changes propagate.
Bengaluru, India

AI Explanation - verified by User9130 on: July 07, 2026
Question 1:
Question 1 asks you to deploy a Redis pod in a specific namespace with a specific image tag, and to ensure it stays running and exposes the Redis port.
What you need to do

Switch context to the cluster shown (use the context “k8s Context A”).

Ensure the pod runs in namespace web (the namespace is already created).

Create a pod named cache using image Ifccncf/redis:3.2.

Expose port 6379 (make the container port available; to access from other pods you’d typically create a Service).

How you might implement it

Pod manifest (simplified):

- apiVersion: v1 kind: Pod metadata: name: cache namespace: web spec: containers: - name: redis image: Ifccncf/redis:3.2 ports: - containerPort: 6379

Alternatively, with kubectl:

- kubectl config use-context "k8s Context A" - kubectl run cache --image=Ifccncf/redis:3.2 -n web --port=6379
Why this works

You’re placing the pod in the specified namespace and using the requested image:tag.

Redis runs in the foreground by default, so the pod stays running.

Exposing 6379 lets other pods connect; to expose externally you’d add a Service.

Munich, Germany

AI Explanation - verified by lilianobi28 on: July 08, 2026
Question 158:
Question 158 asks which method would most likely be used by attackers to perform credential harvesting.

Correct answer: A) Social engineering.

Why: Credential harvesting is about tricking users into revealing usernames and passwords. Social engineering (e.g., phishing, pretexting) directly targets people to disclose credentials, often via fake login pages or convincing messages.

Why the other options are less likely:

- Rainbow table: offline password cracking, not harvesting credentials from users. - Supply chain compromise: can lead to malware or compromised software, but not the direct act of collecting user credentials. - Third-party software: could be a vector for infection, but the explicit credential harvesting method is typically social engineering.
Defensive takeaways:

Train users to recognize phishing and social engineering attempts.

Implement MFA to reduce credential impact.

Use password managers and unique passwords.

Verify URLs and sender authenticity before entering credentials.

Run phishing simulations to strengthen awareness.

Lagos, Nigeria

AI Explanation - verified by User4167 on: July 27, 2026
Question 2:
For question 2, the correct choice is A.

The diagnostic output shows that the protocol is TCP (proto=6) and the session state is 2.

In FortiGate’s session output, state=2 maps to SYN_SENT. This means the TCP SYN has been sent but the handshake hasn’t completed yet.

Therefore, the session is not ESTABLISHED, FIN/ACK-related states, or other states; it’s in SYN_SENT.

If you want, I can walk through how FortiGate encodes proto/state values in the session output.
Long Beach, United States

AI Explanation - verified by User5259 on: August 04, 2026
Question 1:

Answer: False. Agents and managers CAN create knowledge articles from Community questions.

Why: In ServiceNow, a Community question can be converted into a Knowledge article using the Create Knowledge (or Convert to Knowledge) action. This allows what customers asked to become a reusable article for others.

How it works (high level):

- Open the Community question. - Use the Create Knowledge option to generate a new article in a knowledge base. - Add or adjust metadata (category, keywords) and publish after review/approval.

Permissions: This ability depends on having the right roles/permissions (e.g., agents or knowledge managers). If you don’t see the option, check your role assignments or the knowledge-management configuration.

Quick take: If a question in Community is valuable for others, a trained agent can turn it into a Knowledge article, making it available for self-service.

Hyderabad, India

AI Explanation - verified by User6075 on: August 04, 2026
Question 36:
Answer: A
Reasoning:

In Microsoft Teams Phone System, a single Auto Attendant can handle multiple time-based greetings by using separate schedules for office hours, after hours, weekends, and holidays.

You can configure one Auto Attendant with four distinct greetings mapped to:

- Office hours (Mon–Fri 09:00–17:00) - Outside office hours (Mon–Fri 17:00–09:00) - Weekends (Sat–Sun, all day) - National holidays (Holiday schedule)
How to configure:

Open the Teams admin center > Voice > Auto attendants, edit or create an Auto Attendant.

Under Time-based routing, define four rules:

1) Weekdays 09:00–17:00 ? Greeting: Office hours 2) Weekdays 17:00–09:00 ? Greeting: Outside office hours 3) Weekends (Sat–Sun 00:00–23:59) ? Greeting: Weekend 4) Holiday schedule ? Greeting: Holiday

Create a Holiday schedule with the relevant dates (e.g., Easter, Christmas) and assign the Holiday greeting.

Save the configuration.

Note:

If your environment cannot separate weekend from after-hours within a single Auto Attendant, you might technically need more than one Auto Attendant.

Mumbai, India

AI Explanation - verified by vivekmadugundu6 on: July 27, 2026
Question 82:
Question 82 asks: What are the four knowledge workflows available in the ServiceNow base instance?
The four workflows listed are:

Approval publish: Request approval from a manager of the knowledge base before moving the article into the publish state.

Instant Publish: Immediately publishes a draft article without requiring an approval.

Instant Retire: Immediately retires a published article without requiring an approval.

Retire Knowledge: Moves a knowledge article to the retired state.

Correct answer: A
Explanation:

These are the base knowledge workflows that control how articles move between states (Draft, Published, Retired) and whether approvals are required.

The other options describe different lifecycle actions, but these four cover the standard publish/retire workflows in ServiceNow.

Hyderabad, India

AI Explanation - verified by User8627 on: July 21, 2026
Question 2:
Question 2 explanation:

Goal: Guests should not use cameras, but company users can.

Correct configuration: Guest access settings in the Org-wide settings.

- In the Teams Admin Center, open the org-wide settings and adjust the Guest access options to disable camera/video for guests. - This restricts guests only, without changing internal users’ camera permissions.
Why not the other options:

External access: Controls external-domain communication, not guest capabilities inside Teams.

Teams settings in Org-wide settings: Too generic; doesn’t specifically target guest capabilities.

Audio & Video in the default Meeting Policy: Would affect everyone assigned to that policy. To meet the requirement without impacting internal users, you’d need separate policies or guest-specific settings; the exam focuses on the guest-access policy.

In short, use Guest access settings to disable camera for guests while preserving camera access for internal users.
Baar, Switzerland

AI Explanation - verified by surajnaidu9999 on: July 21, 2026
Question 1:
Answer: D (Reconnaissance and Initial Access)

Phishing can map to two MITRE ATT&CK tactics depending on the attacker’s objective.

- Reconnaissance: “Phishing for information” is a sub-technique used to elicit sensitive data for targeting. - Initial Access: Phishing can also be used to gain a foothold by delivering malicious payloads/executing code.

Therefore, phishing isn’t confined to a single tactic; it can serve both Reconnaissance and Initial Access, which is why option D (Reconnaissance, Initial Access) is correct.

Mumbai, India

AI Explanation - verified by User9156 on: July 24, 2026
Question 29:

The correct answer is D: All of the above.

Why:

Snowflake Web Interface (UI): You can create and manage Virtual Warehouses from the UI (resize, suspend/resume settings, etc.).

SQL commands: You can create and alter warehouses with DDL like CREATE WAREHOUSE and ALTER WAREHOUSE.

Data integration tools: ETL/ELT tools can create/manage warehouses by connecting to Snowflake and issuing the appropriate commands or using their config to specify a warehouse.

If you’d like, I can show quick example commands or steps for each interface.
Chennai, India

AI Explanation - verified by is.chan.army on: August 03, 2026
Question 48:
Question 48 asks which guideline would help stop insider attacks by privileged users.

Correct answer: D – Do not enable default administrative accounts to ensure accountability.

- Rationale: Privileged accounts carry high risk. Default or shared admin accounts are hard to audit and easy for attackers to abuse. Disabling default accounts and requiring unique admin credentials improves accountability and reduces misuse.
Why the others are not correct:

A – Do not use encryption methods … backups and sensitive information: Encryption helps protect data; not using it increases risk, not reduces insider threats.

B – Do not allow administrators to use unique accounts during installation: We actually want unique admin accounts, not the opposite.

C – Do not control the access to administrators and privileged users: Failing to control access directly enables misuse.

In practice, combine D with broader controls: least privilege, separate admin and daily-use accounts, MFA, robust logging, and regular review of privileged activity.
Tamarac, United States

AI Explanation - verified by nanrany on: July 29, 2026
Question 265:
The correct answer is C: Answering billing and account inquiries.
Reasoning:

The AWS Support Concierge is a specialized team within Enterprise Support whose primary role is handling billing and account questions and helping with account setup and getting started.

They are not the source for architecture guidance or development assistance; those services are provided by Technical Account Managers (TAMs) or Solutions Architects as part of Enterprise Support.

For technical support cases, customers typically interact with AWS Support engineers or the TAMs, not the Concierge. The Concierge may route or coordinate related requests, but they don’t provide the technical resolution.

Summary:

What Concierge does: billing and account inquiries, onboarding help, coordination with AWS support.

What Concierge does not do: provide architecture/design guidance or in-depth technical support case resolutions.

Busan, South Korea

AI Explanation - verified by User9999 on: July 04, 2026
Question 24:
Question 24 asks: A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server. Which virtual server type should be configured?

Correct answer (per the key): Forwarding (IP) [option E].

Why this works:

FTP uses dynamic data ports and has two modes:

- Active: server connects back to the client for the data channel. - Passive: client connects to the server for the data channel.

A non-terminating, IP-forwarding virtual server (Forwarding (IP)) simply passes traffic to the pool members without terminating the TCP session. This avoids the complexities of FTP port range translation and protocol handling inside the LTM, allowing both active and passive connections to be established through a single VIP.

In contrast, a Standard virtual server terminates the connection and would require FTP protocol handling (FTP profiles) and can complicate single-VIP support for both modes.

In short: Forwarding (IP) preserves end-to-end FTP behavior for both active and passive modes using one virtual server.
Thalwil, Switzerland

AI Explanation - verified by User5015 on: July 22, 2026
Question 10:
Question 10 asks if migrating all VMs to an Azure pay-as-you-go subscription uses the “elastic expenditure model.”
Here’s the right way to think about it:

In Azure, the typical cost approach for pay-as-you-go VMs is an Operational Expenditure (OPEX) model. You’re billed for actual usage each month.

The term “elastic expenditure model” isn’t a standard Azure cost category. Elasticity describes scaling capacity, not the billing category itself.

So recommending the elastic expenditure model is not correct for this goal.

Conclusion:

The solution does not meet the goal. Answer: No (B).

Why this matters:

Pay-as-you-go aligns with OPEX because costs vary with usage.

Elasticity is about scaling resources, which affects performance and capacity, not the fundamental cost model.

If you want, I can compare this with the other questions in this set (11 and 12) to highlight how the correct expenditure models differ in each scenario.
San Antonio, United States

Arcitura Education C90.02: Skills Tested, Job Roles, and Study Tips

The C90.02 Cloud Technology Concepts exam is designed for IT professionals who need to demonstrate a foundational understanding of cloud computing architectures, delivery models, and deployment strategies. This certification is highly relevant for system administrators, cloud architects, and IT managers who are responsible for evaluating or implementing cloud solutions within their organizations. Employers in the enterprise technology sector often look for this Arcitura Education certification to ensure that their staff possesses a standardized vocabulary and conceptual framework for discussing cloud infrastructure. By validating your knowledge through this certification exam, you signal to potential employers that you understand the core principles that govern modern cloud environments. This credential serves as a baseline for more advanced specializations, making it a critical step for those building a career in cloud-centric IT operations.

What the C90.02 Exam Covers

The C90.02 exam focuses on the fundamental building blocks of cloud computing, requiring candidates to understand how different service models like IaaS, PaaS, and SaaS interact with deployment models such as public, private, and hybrid clouds. You will need to apply your knowledge of cloud technology concepts to identify how these models solve specific business problems or address infrastructure limitations. Our practice questions are designed to mirror the conceptual depth required for this exam, ensuring you can distinguish between various cloud mechanisms and their practical applications. Candidates must be comfortable with the terminology surrounding cloud security, scalability, and resource pooling, as these are recurring themes throughout the assessment. Mastering these topics requires more than just reading definitions, as the exam tests your ability to apply these concepts to real-world scenarios.

The most technically demanding aspect of this exam involves understanding the nuances of cloud architecture and the specific trade-offs between different deployment models. You must be able to analyze a scenario and determine which cloud delivery model provides the optimal balance of control, cost, and scalability for a given business requirement. This requires a deep understanding of how shared responsibility models function and how data sovereignty or compliance issues might influence architectural decisions. Candidates often find this challenging because it requires moving beyond theoretical knowledge to evaluate the practical implications of cloud adoption in complex enterprise environments.

Are These Real C90.02 Exam Questions?

Our practice questions are sourced and verified by the community, consisting of IT professionals and recent test-takers who have sat the actual exam. Because these individuals have firsthand experience with the testing environment, our questions reflect what appears on the real exam. If you have been searching for C90.02 exam dumps or braindump files, our community-verified practice questions offer something more valuable because each question is verified and explained by IT professionals who recently passed the exam. We do not provide unauthorized or leaked content, as our focus is on helping you understand the underlying concepts that the exam tests. This community-verified approach ensures that the material remains relevant and accurate to the current exam objectives.

The verification process works through active participation from our user base, where IT professionals discuss answer choices and provide context based on their recent exam experience. When a question is flagged or debated, the community works together to clarify the reasoning, which helps everyone learn the correct methodology for solving similar problems. This collaborative environment allows you to see how others approached difficult topics and helps you identify gaps in your own knowledge. By engaging with these discussions, you gain insights that go far beyond simple memorization, which is essential for passing the certification exam.

How to Prepare for the C90.02 Exam

Effective exam preparation for the C90.02 requires a balanced approach that combines theoretical study with hands-on application in a sandbox or lab environment. You should prioritize understanding the core concepts of Arcitura Education certification standards rather than relying on rote memorization of facts. Every practice question includes a free AI Tutor explanation that breaks down the reasoning behind the correct answer, so you understand the concept, not just the answer. Building a consistent study schedule that allows you to review these explanations will help you internalize the material and apply it to different scenarios. Utilizing official documentation alongside our practice questions will provide the most comprehensive foundation for your studies.

A common mistake candidates make is underestimating the scenario-based nature of the exam, which requires you to apply knowledge rather than simply recall definitions. To avoid this, you should focus on understanding the "why" behind each cloud concept, such as why a specific deployment model is chosen over another in a given business context. Time management is also a critical skill to practice, as you need to be comfortable analyzing complex questions quickly without rushing. By using our practice questions to simulate the exam environment, you can identify your weak points early and adjust your study plan accordingly.

What to Expect on Exam Day

On the day of your Arcitura Education certification exam, you should be prepared for a format that emphasizes conceptual application through multiple-choice questions. While the specific number of questions and time limits can vary, the exam is designed to test your breadth of knowledge across the entire cloud technology spectrum. You will likely encounter scenario-based questions that require you to synthesize information to reach the correct conclusion. The exam is typically administered through professional testing centers or secure online proctoring services, ensuring a standardized and fair testing environment for all candidates. Being familiar with the types of questions you will face is a key component of your overall exam prep strategy.

Who Should Use These C90.02 Practice Questions

These practice questions are intended for IT professionals, cloud administrators, and technical consultants who are pursuing the C90.02 credential to validate their cloud expertise. Whether you are just starting your journey into cloud computing or are an experienced professional looking to formalize your knowledge, this certification exam provides a recognized benchmark for your skills. Candidates typically have some experience with IT infrastructure and are looking to transition into roles that require a deeper understanding of cloud delivery and deployment models. By using our platform for your exam preparation, you are positioning yourself to demonstrate your competency to employers who value the Arcitura Education certification standard. This is an essential step for anyone aiming to advance their career in the rapidly growing field of cloud technology.

To get the most out of these practice questions, you should avoid simply reading the correct answer and moving on to the next item. Instead, you should actively engage with the AI Tutor explanation to ensure you understand the underlying logic, and participate in the community discussions to see how other professionals interpret the questions. If you find yourself consistently getting certain topics wrong, flag those questions and revisit them after reviewing the official documentation. Browse the questions above and use the community discussions and AI Tutor to build real exam confidence.

AI Tutor 👋 I’m here to help!

Arcitura Education C90.02 Exam Actual Questions Cloud Technology Concepts (Page 7 )

QUESTION: 6

QUESTION: 7

QUESTION: 8

QUESTION: 9

QUESTION: 10

Arcitura Education C90.02: Skills Tested, Job Roles, and Study Tips

What the C90.02 Exam Covers

Are These Real C90.02 Exam Questions?

How to Prepare for the C90.02 Exam

What to Expect on Exam Day

Who Should Use These C90.02 Practice Questions

Arcitura Education C90.02 Exam Actual Questions
Cloud Technology Concepts (Page 7 )