ASIS ASIS-CPP Exam Actual Questions
ASIS Certified Protection Professional (Page 50 )

• Answer: A — EC2 Image Builder

• Why: EC2 Image Builder is AWS’s fully managed service designed to automate the creation, testing, and ongoing management of custom EC2 AMIs. It lets you build image pipelines that start from a base image, apply software/components, run tests, and publish/distribute the resulting AMIs across regions or accounts.

• How it works (high level):

• Why not the other options:

• Quick tip: Use EC2 Image Builder to reduce manual image maintenance and drift, and to enforce consistent, tested base images across environments.

• Storage accounts: storage1, storage2, and storage3
• Log Analytics workspace: Analytics3

• Azure Backup reports can send the AzureBackupReports diagnostic log to eligible storage accounts. The storage account’s subscription and region do not have to match the Recovery Services vault, so all three listed storage accounts are valid.
• The Log Analytics workspace must be in the same region as the Recovery Services vault for this configuration. Vault1 and Analytics3 are both in West Europe, making Analytics3 the valid workspace.

• Correct answer: D – Do not enable default administrative accounts to ensure accountability.

• A – Do not use encryption methods … backups and sensitive information: Encryption helps protect data; not using it increases risk, not reduces insider threats.
• B – Do not allow administrators to use unique accounts during installation: We actually want unique admin accounts, not the opposite.
• C – Do not control the access to administrators and privileged users: Failing to control access directly enables misuse.

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

• Used for communication on the local link or LAN segment
• Automatically generated on IPv6-enabled interfaces
• Not routed by routers to other networks
• Commonly used by devices to communicate with their local IPv6 router
• Begins with FE80 through FEBF

• FC00::/7 — unique local unicast
• FE80::/10 — link-local unicast
• FF00::/8 — multicast
• 2000::/3 — global unicast

• The correct option is B: AWS Storage Gateway.

• Why: The scenario requires backing up on-prem data to AWS without changing existing backup workflows. AWS Storage Gateway provides a hybrid storage solution; specifically, the Tape Gateway emulates a physical tape library, allowing your existing backup software to write to virtual tapes that are stored in AWS (in S3 or S3 Glacier). This lets you back up 10 TB to the cloud while preserving current backup workflows and on-prem infrastructure.

• How it would work: Deploy a gateway appliance or VM on-site, connect your tape-based backup software to the virtual tape library, and start writing to virtual tapes. The data is then archived in AWS, freeing up local storage.

• Why the others aren’t suitable:

• Quick tip: If you weren’t using tape, File Gateway could be another option for file-based backups; Tape Gateway is the right pick for tape-based workflows.

• The app on EC2 connects to Aurora using DB credentials stored on the instance. Secrets Manager centralizes these credentials and can rotate them automatically, eliminating manual updates on each EC2 host.
• Automatic rotation reduces operational overhead and enhances security because credentials are rotated on a schedule without code changes.
• The app can retrieve the current secret at runtime (e.g., via the AWS SDK) and use it to authenticate to Aurora, avoiding reliance on locally stored files.

• B (Parameter Store) can store secrets but lacks seamless built-in rotation for database credentials like Secrets Manager; rotation often requires more custom work.
• C (S3) would require complex tooling to rotate and securely fetch credentials and still risks exposure if access policies aren’t perfect.
• D (Encrypted EBS volumes) would store credentials locally on each instance and does not automate rotation or centralized management.

• Answer: D

• The strongest security comes from enforcing access at the storage layer. An IAM policy scoped to the Cognito identity prefix restricts each user to their own S3 prefix (folder), so users can only access their own files regardless of client or server code.
• This per-user isolation reduces risk of cross-user data access and is more robust than UI validation or Lambda/API validation alone.
• Implementation note: attach a policy to the Cognito identity role that allows actions on arn:aws:s3:::your-bucket/${cognito-identity.amazonaws.com:sub}/* (per-user prefix). Ensure TLS in transit and enable at-rest encryption (SSE-S3 or SSE-KMS). Use multipart upload for large files up to 300 MB.

• Startup scripts run at computer startup, before any user logs on, making them ideal for machine-wide configuration on each new VM.
• They execute under the Local System account, which is appropriate for initial setup tasks.
• Linking a GPO to the OU ensures every new VM in that domain automatically receives the configuration—great for scalability.

• A) SetupComplete.cmd runs only once, right after Windows Setup, not on every boot, so it isn’t ideal for provisioning multiple VMs consistently.
• B) Logon scripts run per user, not per machine, so they aren’t reliable for initial VM configuration before a user signs in.
• D) Placing scripts in a VHD doesn’t automatically execute them.

• Premium file shares: contoso104 only
• Blob access tiers: contoso101, contoso102, and contoso103

• Premium Azure Files shares require a storage account with the FileStorage account kind. This is a specialized account type and is not used for blob storage.
• Blob access tiers such as Hot, Cool, and—where supported—Archive apply to blob-capable accounts, such as General-purpose v2 or BlobStorage accounts shown in the exhibit.
• contoso104 is therefore excluded from the blob-tier selection because it is the premium Files account.

• 6-phone boxes: 6x
• 8-phone boxes: 8x

• The correct option is A: Data architecture.

• Why: In the AWS CAF, the Platform perspective covers the technical foundation and architecture that enable cloud workloads to run reliably and efficiently. This includes how data is modeled, stored, and accessed across the enterprise—the core of data architecture.

• Quick mapping for the other options:

• Key difference: DirectQuery leaves data in the on-prem SQL Server and queries it live. That means every visual request can trigger online processing on the source, which can be slower and adds load on the on-prem system. In contrast, Import loads data into the Power BI data model, so visuals render from the in-memory engine (faster).

• Why that helps with the requirements:

• Why not A or B: Both rely on live data via DirectQuery, which contradicts the goal to minimize online processing and visuals performance.

• Why not D: It uses Import, but refreshing hourly adds unnecessary processing and complexity when daily refresh already satisfies currency needs.

• Recovery procedures actually work
• Recovery time and recovery point objectives can be met
• Staff understand their responsibilities
• Contact details, dependencies, and technical configurations are accurate
• Gaps or conflicts exist in the plan

• Not version-controlled: Creates a risk of using an outdated copy, but the plan might still be effective.
• Contact information needs updating: This is a specific weakness that can be corrected, often identified during testing.
• Not approved by senior management: Approval is important for authority and resource commitment, but an untested plan presents the most direct risk that recovery will fail when needed.

• In the source query: apply UPPER() or LOWER() to the column.
• In Power Query Editor: use Text.Upper or Text.Lower on the column, then load.

• This fixes the root cause when comparisons/joins depend on case.
• In DirectQuery, transformations are pushed to the source or query layer; ensure the transformation is supported by your data source/connector.
• After normalization, verify relationships and any downstream visuals that rely on that column.

• A) MTU mismatch: OSPF neighbors must exchange Hello packets with a compatible MTU. If MTUs differ, the neighbor conversation fails and the adjacency cannot become Full.

• B) Incorrect subnet mask: Routers must be in the same IP subnet on the connected link to form a neighbor relationship. A subnet mismatch prevents Hello packets from being considered valid on the same network.

• D) Area ID not the same: Neighbors must share the same Area ID. A mismatch stops adjacency from forming beyond the 2-Way state.

• E) Different metric set on each end of the link: Cost differences do not prevent OSPF adjacency; they affect routing decisions, not neighbor formation.
• F) Router ID not defined: OSPF can auto-choose a router ID; an undefined ID is not a prerequisite for adjacency to reach Full.

• Correct answer: enable SLAAC on an interface (C)

• Why the other options are not correct:

• Correct answer: A — a clear business case has been established.

• The audit focus for IT procurement is ensuring there is a solid economic justification for the investment. A clear business case documents the expected benefits, costs, risks, and alignment with strategic objectives, which governs whether the investment is worth pursuing.
• The other options are important controls or project aspects, but they are secondary to ensuring the investment is justified financially and strategically:

• Enable the owner dimension

• Assign a standard costing inventory model

• Batch dimension tracks batches or lots, such as expiration or production batches. It does not identify inventory ownership.
• Moving average is a costing method, but it is not the required choice for this consignment configuration.

• Step 1: From Power BI Desktop, select Get Data, choose Folder, enter the folder path, and click OK, then choose Transform data to open Power Query Editor.

• Step 2: In Power Query Editor, expand the Attributes column.

• Step 3: From the Power Query Editor, select the Content column and use Home > Combine Files (aka “Combine binaries”) to consolidate the files.

• RPO (Recovery Point Objective) — maximum acceptable data loss, measured in time. It specifies how far back in time you can tolerate data loss. Example: RPO of 2 hours means backups must occur at least every 2 hours.

• ARO (Annualized Rate of Occurrence) — expected frequency of a threat occurring per year. It estimates how often a risk is likely to happen on average (used in risk calculations).

• MTTR (Mean Time To Recover) — average time to recover/restore service after an incident. It includes detection, repair, and restoration time, and helps gauge downtime and alignment with RTO.

• 25 — Traditional SMTP server-to-server mail transfer; not normally used for secure client submission.
• 110 — POP3, used to retrieve email and typically unencrypted.
• 143 — IMAP, used to access email and typically unencrypted.

• Hardware and infrastructure
• System software
• Networks and communications
• Technology platforms and services

• Business Architecture: Defines business strategy, organization, functions, and processes.
• Data Architecture: Defines the structure and management of enterprise data.
• Application Architecture: Describes application systems and how they interact to support business and data processing.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of unauthorized activity. Security teams can also observe attacker behavior.

• DNS sinkhole: Redirects requests for known malicious domains to a controlled internal server or blocks them. If an infected workstation attempts to contact command-and-control infrastructure, the sinkhole records the request and helps identify the compromised device.

• Tokenization: Protects sensitive data by replacing it with tokens.
• CI/CD: Automates software development and deployment.
• Threat modeling: Identifies potential risks before or during system design.
• Data obfuscation: Makes data harder to understand, but does not detect intruders.

• Two VMs
• Distributed across two separate availability zones

• Question 142: Security governance is MOST associated with which IT infrastructure component? Network / Application / Platform / Process
• Answer: D. Process

• Security governance is about how decisions are made, accountability, and oversight to ensure security objectives align with business goals. These are implemented through governance processes (policy development, risk management, assurance, monitoring, escalation, etc.).
• The other options (Network, Application, Platform) are concrete IT components; governance affects them, but it’s exercised primarily through the processes that govern how those components are managed and controlled.

• In governance-related questions, focus on the decision-making, accountability, and control processes rather than the underlying technology components.

• Correct answer: A) Hashing

• Why: Hashing produces a fixed-size digest of the software. If the final build is altered in any way, the hash will change, enabling you to detect tampering by comparing the stored digest with a freshly computed one.

• Why not the others:

• Windows 10 VMs
• Windows Server 2012 or later VMs
• Running VMs—they do not need to be shut down
• Debian 8.2+ VMs, assuming the specific version is supported
• Stopped or deallocated VMs

• Correct answer: D. AWS CloudShell

• Why: AWS CloudShell is a browser-based shell that runs in the AWS Console and uses the current authenticated session. It provides a pre-authenticated, ready-to-use command-line environment directly from the Management Console, with AWS CLI and common tools installed.

• Why the other options aren’t correct:

• Answer: B — Improve employee training and awareness

• Why this is correct:

• Why the other options are less effective here:

• Quick practical note:

• Actual filename: Document.xml.txt
• Explorer displays: Document.xml
• File type: Text Document (.txt)

text 
Document.txt ? Document.xml

• State is stored remotely in Terraform Cloud/Enterprise, not as a local file.
• Terraform runs (plan/apply) can be executed on remote infrastructure, with results visible in the remote workspace UI.
• Supports workspace-based organization, state locking, and concurrency control.
• Useful for team collaboration, centralized governance, and auditable logs.

• In your configuration, you use a backend block like backend "remote" { ... }.
• You still run terraform init to configure/migrate to the remote backend.
• After setup, terraform plan/terraform apply may be executed remotely, and the outputs/logs appear in the Terraform Cloud/Enterprise UI rather than (only) in your local terminal.

• Other backends store state remotely but typically do not provide remote execution; with the remote backend you get remote runs and a collaborative UI, not just remote state storage.

• Active vs passive: Active assessment involves actively scanning targets by sending probes/packets to identify hosts, services, and vulnerabilities. Passive assessment observes traffic without probing.
• External vs internal: External assessment is about testing from outside the network perimeter; the scenario doesn’t specify external vantage, only that tools are identifying hosts/services across the enterprise network.

1. Ingestion Lambda receives requests from API Gateway and places messages in an SQS queue.
2. Processing Lambda is triggered by the queue and loads records into Aurora PostgreSQL.

• Decoupling: API request handling is separated from database loading.
• Buffering: SQS absorbs bursts when incoming traffic exceeds the database’s processing capacity.
• Controlled concurrency: Configure the SQS-triggered Lambda’s concurrency and batch size to avoid overwhelming Aurora or exhausting database connections.
• Automatic retries: Messages that fail processing can return to the queue and be retried. A dead-letter queue can capture persistent failures.
• Lower operational effort: The solution remains serverless and avoids managing EC2 servers or Kubernetes clusters.

• A: EC2 and Tomcat add server-management overhead.
• B: DynamoDB/DAX would require changing the database model and does not solve the Aurora ingestion design.
• C: SNS is useful for notifications and fanout, but SQS is better for durable buffering and backpressure in this producer-consumer workflow.

• Answer: Data enhancement.

• Why: Augmenting gold-layer tables with an additional dataset is enriching or enhancing the existing data to support the ad-hoc analysis. The other options don’t capture the idea of adding external data to improve the dataset (ad-hoc improvements = tweaks, last-mile dashboarding = building dashboards, last-mile ETL = ETL steps at the end of the pipeline). In practice, this is often also called data enrichment.

• According to the provided answer key, the four options are: Upload File, User Criteria, HR Profiles, HR Criteria (options B, D, F, G).

• Upload File: Filter by a file you upload (e.g., CSV) that provides data for bulk case creation.
• User Criteria: Filter by criteria related to users (e.g., role, department) to select target users.
• HR Profiles: Filter by HR profile data associated with users.
• HR Criteria: Filter by HR-related criteria or attributes.

• IaaS provides virtualized infrastructure, including VMs, disks, and networking. You manage the guest operating system and software installed on the VM.
• PaaS provides a managed platform for deploying applications without managing the underlying VMs or operating systems. Examples include Azure App Service and Azure Functions.

• B — Increase provisioned concurrency for Lambda

• D — Refactor the Lambda functions

• E — Use Amazon RDS Proxy

• prompt: the input or instruction given to the model
• completion: the desired response

json 
{"prompt":"Summarize this customer complaint.","completion":"The customer reports a delayed shipment."}

• B: A .txt file containing CSV-style lines is not automatically a valid fine-tuning dataset. The required structure and format must match the selected Bedrock model.
• C: Provisioned Throughput provides dedicated inference capacity; it does not fine-tune a model.
• D: Journals and textbooks might support domain adaptation or pretraining, but they do not provide the prompt-to-answer examples typically required for supervised fine-tuning.

• A limited lifetime
• Permissions defined by an IAM role or policy
• The ability to access AWS APIs without using long-term IAM user credentials

• Amazon API Gateway — Builds and manages APIs; it does not generally issue AWS credentials for applications.
• IAM users — Usually use long-term credentials, which are less suitable for applications.
• IAM instance profiles — Provide temporary role credentials to applications running on EC2 instances, but are specifically tied to EC2. The broader requirement described is best met by AWS STS.

python 
import azure.cognitiveservices.speech as speechsdk 


speech_config = speechsdk.SpeechConfig( 
    subscription="YOUR_KEY", 
    region="YOUR_REGION" 
)

Important Azure Speech SDK classes

• SpeechConfig

• AudioConfig

python 
  audio_config = speechsdk.audio.AudioConfig( 
      use_default_microphone=True 
  )

• SpeechRecognizer

python 
  recognizer = speechsdk.SpeechRecognizer( 
      speech_config=speech_config, 
      audio_config=audio_config 
  )

• SpeechSynthesizer

• AudioOutputConfig

 Bogotá, Colombia