Free Avixa CTS Exam Questions (page: 18)

[Developing AV Solutions]
What is the MAIN difference between OLED displays and LED displays?

  1. luminosity
  2. higher brightness
  3. self-emitting light source
  4. determined screen shape

Answer(s): C



[Conducting a Needs Assessment]
During a site survey of a facility to be upgraded or modernized, it is important to check wireless microphones that may be redeployed to ensure

  1. battery types conform to environmental concerns.
  2. polar patterns will not clash with new fabric treatments.
  3. microphones are operating on acceptable radio frequencies.
  4. antenna design will not interfere with HDBaseT signal distribution system.

Answer(s): C



[Developing AV Solutions]
When calibrating a loudspeaker system, which weight setting on the SPi. meter is used for its mdus>on of low frequency sound levels in the measurement?

  1. Weighted
  2. Weighted
  3. Weighted
  4. Weighted

Answer(s): C



[Operating AV Systems]

A client has ordered a large LED video wall to be installed in an existing board room.
What should be the integrator's MAIN operational concerns?

  1. power and temperature
  2. brightness and contrast
  3. aspect ratio and resolution
  4. cable management and length

Answer(s): A



[Developing AV Solutions]
Assuming that the screen and projector are both Ethernet controllable devices, where does the control system for the AV solution need to exist?

  1. connected to the network
  2. in the rear projection room
  3. in a dedicated rack in the room
  4. above the projector, plugged into the serial port on the projector

Answer(s): A



[Developing AV Solutions]
Your client has requested a 50inch monitor be mounted on the south wail of this boardroom.
Which two recessed lights will need to be separated into the r own zone in order to turn them off when the monitor is on?

  1. A
  2. B
  3. C
  4. D

Answer(s): D



[Developing AV Solutions]
What is the name for a written, non-technical narrative that explains system functionality?

  1. needs analysis
  2. program report
  3. service manual
  4. performance verification

Answer(s): B



[Developing AV Solutions]
Knowledge of the overall room function as envisioned by the client provides a

  1. budget range for the project.
  2. design concept to give to the architect.
  3. list of major system components for the space.
  4. starting point for determining the space AV needs.

Answer(s): D



Viewing page 18 of 33
Viewing questions 137 - 144 out of 254 questions



Post your Comments and Discuss Avixa CTS exam prep with other Community members:

CTS Exam Discussions & Posts