Free ANVE Exam Braindumps (page: 12)

Page 11 of 37

A customer is not getting the storage retention they had expected while using H.264 with an AXIS Q6034-E PTZ camera on a continuous guard tour.
What is the most likely cause of the problem?

  1. The estimation was only planned for a 720p HDTV PTZ
  2. Using continuous guard tour does not let H 264 save as much on the compression
  3. Because most of the areas in the guard tour are empty. H.264 cannot save as much on the compression
  4. The estimations were done in MPEG-4 and they should change the AXIS Q6034-E to run in MPEG-4 instead of H 264

Answer(s): B



After an installer sets up a motion detection window they then zoom out the camer

  1. How will this affect the camera's ability to detect motion if no settings are changed?
  2. More pixels are needed to change to trigger motion detection
  3. Less pixels are needed to change to trigger motion detection
  4. More movement needed to change to trigger motion detection
  5. Less movement needed to change to trigger motion detection

Answer(s): C



Working with the end user, you find that they need a cost-effective mini dome with a varifocal lens. DC-iris and audio capabilities are not required.
Which of the following products would best fit the requirements?

  1. AXIS P3343
  2. AXIS P3301
  3. AXIS M1113
  4. AXIS M3204

Answer(s): D



Before upgrading firmware, which of the following should be checked?

  1. Verify that the Video Management Software (VMS) supports the latest firmware version
  2. Verify that both rack mounted and standalone servers support the latest firmware version
  3. Verify that the IEEE 802.3af compliant PoE switch supports the latest firmware version
  4. Verify that the SD card is properly ejected before the upgrade is started

Answer(s): A






Post your Comments and Discuss Axis Communications ANVE exam with other Community members:

ANVE Discussions & Posts