Blockchain CBSA Exam Prep
BTA Certified Blockchain Solution Architect (Page 10 )

• Shared capacity

• Fabric capacity — F SKUs

• Fabric trial capacity

• Existing Power BI Premium — P SKUs

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• A is incorrect: Flow Debugger is for debugging Salesforce Flows, not Trust Layer masking.
• B is incomplete/misleading: Requesting audit data may be part of reviewing the results, but collection and storage must first be enabled.
• C is correct: It describes the initial validation step.

• Due diligence: Investigating and evaluating a third party before entering a business relationship.
• Attestation: An independent auditor’s examination and formal report—such as the SOC 2 report itself. The analyst is reviewing the attestation, not performing it.
• Internal audit: Examines the organization’s own processes and controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

• One network address
• Two usable host addresses—one for each router
• One broadcast address

• Router A: 10.2.1.1
• Router B: 10.2.1.2

• IRR assumes that interim cash flows can be reinvested at the project’s own IRR. This may be unrealistic, especially when the IRR is very high.
• MIRR assumes reinvestment at a specified rate, usually the company’s cost of capital or another realistic reinvestment rate.

• B: MIRR does not specifically favour projects with long payback periods.
• C: MIRR and IRR can rank competing projects differently.
• D: MIRR is not always higher than IRR; it may be higher or lower depending on the cash flows and reinvestment rate.

• Type 1 hypervisor: Runs directly on the physical hardware (“bare metal”).
• Type 2 hypervisor: Runs inside the host OS as an application.

• Bare-metal installation: Type 1
• Local management only: Not a defining characteristic
• Specific hardware requirements: Not the key distinction

• Customer needs: Primary focus in agile; guides prioritization and decision-making.
• Organization’s needs: Important constraints, but processes should be tailored when they create waste.
• Agile lead/project manager: Their role is to facilitate value delivery, not prioritize their own preferences.

• Confirming the data has the required columns and data types
• Handling missing or duplicate records
• Converting data into a suitable format
• Selecting or engineering useful features
• Splitting it into training, validation, and test sets

1. Prepare the training data
2. Select an algorithm or configure AutoML
3. Train the model
4. Evaluate its performance
5. Tune hyperparameters if needed
6. Deploy the model

1. Install a Cassandra-compatible ODBC driver.
2. Configure a data source name (DSN), if required.
3. In Power BI Desktop, select Get Data > ODBC.
4. Choose the configured DSN and connect.

• Microsoft SQL Server database: Connects to SQL Server, not Cassandra.
• OLE DB: Requires a compatible OLE DB provider; this is not the standard choice for Cassandra in Power BI.
• OData: Requires Cassandra data to be exposed through an OData service, which is not the normal direct connection method.

• Portfolio definition cycle — establishes and maintains the portfolio strategy, objectives, and management framework.
• Portfolio delivery cycle — coordinates and monitors the delivery of change initiatives, ensuring the portfolio remains aligned with strategic objectives and delivers value.

• Practice — a structured area of portfolio management activity, such as risk management or resource management.
• Technique — a method used to perform an activity; it is not the term for portfolio delivery itself.
• Principle — a guiding rule for effective portfolio management.

• Products ? OrderHistory: Products is 1, OrderHistory is many (1:*)

• Date ? OrderHistory: Date is 1, OrderHistory is many (1:*)

• Guest access: Controls external users invited into your teams as guests. It is not the primary setting for restricting federated communication by domain.
• Messaging policy: Controls messaging features, such as chat or message editing, rather than which organizations users can communicate with.
• Org-wide Teams settings: Contains broad Teams-wide configuration, but domain-based external communication is configured under External access.

• Box 1: No — The rule requires user.department to equal Engineering. Engineer does not match, so User1 is not in AU1. Admin1 cannot reset User1’s password.
• Box 2: No — Admin1’s role is scoped to AU1 and cannot manage users outside that AU.
• Box 3: Yes — Admin2 is a Global Administrator and can reset User3’s password.

• MTTC: Time required to contain or limit the incident’s impact — best match.
• MTTR: Time required to remediate or recover from the incident; this may include eradication, restoration, and cleanup, which goes beyond merely stopping spread.
• MTTD: How long it takes to discover the incident.
• MTBF: Average time between failures, generally a reliability metric.

• A is valid:

apex 
  for (Account theAccount : AccountList) { 
      // process theAccount 
  }

• D is conceptually valid, using an index:

apex 
  for (Integer i = 0; i < AccountList.size(); i++) { 
      Account theAccount = AccountList[i]; 
  }

• B is invalid because for(AccountList) is not valid loop syntax.
• C is invalid because each item is an Account, not a List.

1. insert con; ? 1
2. Database.setSavepoint(); ? 2
3. update con; ? 3
4. Database.rollback(sp_admin); ? 4

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

1. Write a structured log entry to CloudWatch Logs containing:

1. Create a CloudWatch Logs metric filter that:

text 
ApiRequests 
Operation=GetOrders 
ResponseCode=500 
Version=2.4.0

• B is incorrect: CloudWatch Logs Insights queries analyze logs but do not directly publish metrics in this manner.
• C is incorrect: ALB access logs do not contain arbitrary Lambda response metadata as custom fields.
• D is incorrect: X-Ray traces and insights are not the appropriate mechanism for creating these custom, dimensioned application metrics.

• Suspended an operator who correctly refused to use unsafe equipment.
• Rewarded another operator for using the equipment despite the broken safety guard.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — This factory’s safety record is likely to be poor.

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• Tokenization: Replaces the value with a nonsensitive token, often reversible through a secure token vault.
• Hashing: Converts data into a one-way fixed-length value, generally used for integrity checks or password storage.
• Obfuscation: A broad term for making data difficult to understand; it is less precise than masking in this context.

• Maintain head office control: Transfer pricing generally supports decentralisation rather than direct head-office control.
• Establish centralised decision making: This conflicts with divisional autonomy.
• Develop a top-down culture: Transfer pricing is intended to support empowered divisions and goal congruence, not impose purely top-down management.

1. The original app version exists.
2. You create and publish a new version, so there are now two versions.
3. When you restore the previous version, Power Apps does not delete or overwrite the newer version. Instead, it creates another version based on the restored one.

• Original version
• Newly created and published version
• New version created by the restore operation

• Red team: Simulates attackers and tests exploitability.
• Blue team: Defends, monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team activities to improve cooperation and defenses.
• White team: Manages and oversees the rules, scope, and authorization of the exercise.

• Prevention costs – costs incurred to stop defects occurring, such as staff training, quality planning and supplier evaluation.
• Appraisal costs – costs of checking whether products meet standards, such as inspection, testing and quality audits.
• Internal failure costs – costs of defects found before delivery to customers, such as scrap, rework and retesting.
• External failure costs – costs of defects found after delivery, such as warranty claims, returns, complaints and product recalls.

• Orders contains order-level information, such as the order date.
• Order Line Items contains the products, quantities, and line amounts associated with each order.
• Merging them on the order key, such as OrderID, places the order date alongside each line item. This allows you to calculate total order value and analyze it over time.
• Product attributes can remain in the Products table and be related to the resulting line-item table through ProductID.

• Merging line items with products addresses product attributes but does not first provide the order-level date and value needed for time analysis.
• DAX calculated columns or lists add unnecessary model complexity.
• Calculating order counts is not the first requirement and does not combine the required order and line-item data.

• Scale out during the hours when customer traffic is high.
• Scale in during low-demand periods, reducing instance-hours and cost.
• Use scaling policies based on metrics such as CPU utilization or request count.

• Multiple Availability Zones: Improves availability and fault tolerance, but does not automatically reduce cost.
• Placement group: Helps with specialized performance or low-latency requirements, not cost optimization.
• Private subnets: Improve network security, but do not automatically adjust capacity or reduce EC2 usage costs.

• C. Case after-insert trigger that publishes a Platform Event

• D. Custom Apex controller that publishes a Platform Event

• A. Trigger with a callout: Salesforce triggers should not make direct synchronous callouts, and this tightly couples transaction processing to the external system.
• B. Workflow Rule with Outbound Message: This can react to record changes, but it cannot reliably capture a user clicking a menu item. It also does not provide the same flexible event-driven model as Platform Events.

Manager role

DAX 
Country[Manager] = USERPRINCIPALNAME()

• Sales
• Human Resources

CFO role

• See sales for all countries
• See no Human Resources data

• Do not restrict the Country table or Sales table.
• Apply a filter to Human Resources that always returns false, such as:

DAX 
FALSE()

• Outer packet: 10.5.1.1 > 52.165.16.154
• IPv4 protocol field: 41, which indicates IPv6 encapsulation
• Inner packet: IPv6 traffic between 2001:... addresses

• MAC address spoofing: Changes Layer 2 addressing; it does not explain the IPv6-in-IPv4 structure.
• Steganography: Hides data inside files or media, not visibly in a tunneled protocol.
• Broken encryption: No evidence of encryption being cracked.
• On-path sniffing: Involves intercepting traffic, not sending data to an external host.

• # Development
• # Testing
• # Production

• Separate endpoints: relate to compute or connectivity, not dashboard labels.
• Separate queries: retrieve or transform data but do not designate visual sections.
• Direct text written into the dashboard in editing mode: dashboards use text boxes, typically with Markdown formatting, rather than arbitrary text placed directly on the canvas.

• The CSV contains the external users’ email addresses.
• The bulk invitation feature supports inviting many guest users in one operation.
• Each invited user becomes a guest account in contoso.com.

• B — Data source settings in Power BI Desktop:

• D — Formula bar in Power Query Editor:

m 
  Excel.Workbook(File.Contents("new path"))

• E — Advanced Editor in Power Query Editor:

• A: Dataset settings in the Power BI service mainly handle credentials and gateway settings, not changing the local file path embedded in the PBIX.
• C: Current File data-load settings control refresh/load behavior, not the source location.

DAX 
Sales % of Total = 
DIVIDE( 
    [Total Sales], 
    CALCULATE( 
        [Total Sales], 
        ALLSELECTED(Products) 
    ) 
)

DAX 
Total Sales = 
SUM(Sales[SalesAmount])

Why ALLSELECTED is required

• The numerator, [Total Sales], is evaluated for the current product.
• ALLSELECTED(Products) removes the current product’s visual filter when calculating the denominator.
• It preserves filters applied at the report, page, or slicer level.

Why not ALL(Products)?

DAX 
CALCULATE([Total Sales], ALL(Products))

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

• Deficiency found before patient use: usually does not require an adverse-event report because no patient exposure occurred.
• Event caused solely by the patient’s condition: may not be reportable if the device did not contribute.
• Malfunction protection operated correctly: generally exempt when the device’s safety mechanism worked as intended and prevented harm.

• A — Use getRecordTypeInfosByDeveloperName()

apex 
  Id rtId = Schema.SObjectType.Account 
      .getRecordTypeInfosByDeveloperName() 
      .get('Business_Account') 
      .getRecordTypeId();

• C — Query the RecordType object

apex 
  RecordType rt = [ 
      SELECT Id 
      FROM RecordType 
      WHERE SObjectType = 'Account' 
      AND Name = 'Business Account' 
      LIMIT 1 
  ];

• B: An outbound SOAP call is unnecessary and inefficient.
• D: Hardcoding an ID is not dynamic, and IDs can differ between orgs.

DAX 
Blue Sales = 
CALCULATE( 
    [Total Sales], 
    KEEPFILTERS('Product'[Color] = "Blue") 
)

• CALCULATE evaluates [Total Sales] after applying an additional filter.
• 'Product'[Color] = "Blue" restricts the calculation to blue products.
• KEEPFILTERS ensures the existing filter context is preserved. For example, filters for year, region, or customer remain active. If Color is already filtered, the blue condition is applied as an intersection rather than replacing the existing filter.
• Avoid ALL, because it removes filters and would not maintain the existing context.

• Elasticity: Automatically increases or decreases resources based on demand.
• Scalability: The ability to increase capacity to handle more workload.
• Low latency: Minimizes network response time; it does not provide protection from failures.

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings

• STIX: A standardized format for exchanging cyber-threat intelligence.
• OVAL: A language and framework for describing and assessing system vulnerabilities and configuration issues.
• Threat intelligence feed: Provides current indicators or threat information, but is not specifically a reference for common application exploitation techniques.
• CVE: A catalog of publicly disclosed vulnerabilities, identified by unique CVE numbers.

• Packet capture: Collects and analyzes network traffic; it does not describe the scan type.
• Privilege escalation: Attempts to gain higher permissions after obtaining access.
• System enumeration: Identifies systems, services, or resources, but is not specifically defined by the lack of credentials.
• Passive scan: Observes traffic without actively probing systems. A vulnerability scan is generally an active assessment.

• Azure Cosmos DB is a globally distributed NoSQL database service. It stores and retrieves application data, but it does not provide the complete environment for building, testing, and deploying predictive analytics models.
• Azure Machine Learning is the appropriate service for this requirement. It supports creating experiments, training and testing models, and deploying them for predictions.
• Azure Machine Learning Studio provides the browser-based interface for these tasks.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

• Espionage: Stealing confidential information, often for a competitor or foreign entity.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: A cyberattack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or services used outside IT oversight.

• Initial Intrusion: The compromised VPN account and stolen phishing credentials describe how the attacker first gained access, but that happened months earlier.
• Persistence: The scheduled tasks and recurring C2 connections show how the attacker maintained and automated continued access.
• Search and Exfiltration: This would involve locating and transferring data. The scenario does not primarily describe data discovery or theft.
• Cleanup: Cleanup involves removing evidence or covering tracks. Obfuscated scripts may make detection harder, but the main behavior here is maintaining access.

• Identity: User-assigned managed identity

• Authorization: Azure RBAC

• Key-based authentication: Provides an endpoint secured with API keys.
• Real-time REST access: Supports online inference through an HTTP/REST endpoint.
• No VM vCPU quota consumption: Microsoft hosts and manages the underlying infrastructure, so your subscription’s VM quota isn’t used.

• Batch: Intended for asynchronous, large-volume processing rather than real-time requests.
• Self-hosted container: You manage the infrastructure and typically need compute resources and quota.
• Standard: This is not the clearest deployment type for the stated requirements; the specific Foundry option is serverless API.

• Azure Machine Learning Studio is designed to build, test, train, and deploy machine-learning models, including predictive analytics.
• Azure Cosmos DB is a globally distributed NoSQL database. It can store data used by an AI solution, but it is not the primary service for developing and deploying predictive models.
• Therefore, the appropriate recommendation is Azure Machine Learning Studio, as shown in Question 15.