Blue Prism DEV01 Exam Prep
Blue Prism Developer (Page 3 )

• MAC flooding: Overwhelms a switch’s MAC address table, potentially causing traffic to be broadcast.
• DNS spoofing: Provides false DNS responses to redirect users.
• ARP poisoning: Sends false ARP information to associate an attacker’s MAC address with another device’s IP address.

bash 
docker run -it microsoft/azure-cli:0.10.17

• docker run starts an Azure CLI container; it does not automatically connect to the AKS cluster.
• The command does not run kubectl apply.
• The container would need the appropriate Kubernetes tools and AKS credentials.
• The device or container must obtain cluster credentials, typically using an AKS credential command, before running Kubernetes commands.

bash 
az aks get-credentials --resource-group <resource-group> --name <aks-cluster> 
kubectl apply -f myapp.yaml

• AWS Audit Manager continuously collects evidence from AWS services and helps assess whether workloads comply with regulatory frameworks and internal policies. It can produce audit-ready reports.
• AWS Config records resource configurations and evaluates them against compliance rules. For example, it can check whether encryption, logging, or access settings meet company requirements.

• Amazon Inspector identifies software vulnerabilities and unintended network exposure, not general policy or regulatory compliance.
• Amazon CloudWatch monitors metrics, logs, and operational events, but is not primarily a compliance assessment service.
• AWS CloudTrail records API activity for auditing and investigation. It supports compliance, but does not itself provide the structured compliance assessment capabilities of Audit Manager and Config.

• Create and manage approved IT services as products
• Control which users can deploy those products
• Apply governance, permissions, and constraints
• Use and manage infrastructure-as-code templates, such as AWS CloudFormation templates

• AWS Resource Explorer: Helps find and browse AWS resources; it does not govern IaC deployments.
• AWS Organizations: Manages accounts, consolidated billing, and organization-wide policies.
• AWS Systems Manager: Provides operational management, such as patching, automation, and parameter storage, but it is not primarily used to catalog and govern IaC-based service deployments.

1. Determine which host was infected first—the originating host.
2. Decide whether each other host is clean or infected based on communication and event logs.

• Compare timestamps and find the earliest suspicious event.
• Look for the host that initiated the malicious connection, file transfer, exploit, or command—not merely a host that later received traffic.
• Follow the timeline through the firewall:

• A host is likely infected if it both receives suspicious activity and then initiates related malicious traffic.
• A host may be clean if the firewall blocked the connection and there is no evidence of execution or follow-on communication.

• Geo-redundant storage (GRS) replicates data to a secondary Azure region, but the secondary copy is normally unavailable for read access.
• RA-GRS provides geo-replication and read-only access to the secondary region, satisfying all requirements.
• Zone-redundant storage (ZRS) replicates data across availability zones within the same Azure region, not separate geographic regions.
• Locally redundant storage (LRS) keeps copies within a single datacenter or region and does not provide geographic resiliency.

• A — IDS attack signatures: An IDS generally detects suspicious network activity but does not necessarily scan uploaded PDF files or prevent them from being accepted.
• C — Load balancer: Distributes traffic among servers; it does not inspect files for malware.
• D — WAF command-injection blocking: A WAF can help block web attacks such as command injection, SQL injection, and cross-site scripting, but this option does not specifically address malicious PDF uploads.

• A. Modify CommunitiesSelfRegController

• C. Configure Communities registration to use a custom Visualforce page

• B. Modify the self-registration trigger — There is no standard “self-registration trigger” intended for this configuration. The registration logic is handled by the Visualforce controller.
• D. Configure a custom Apex controller — The standard approach is to modify the provided CommunitiesSelfRegController, rather than simply selecting a separate controller configuration.

• SAMLRequest: the SAML authentication request
• RelayState: the original destination or application state

• RedirectURL: not the standard SAML parameter for preserving the original request.
• DisplayState: not a standard SAML SSO parameter.
• StartURL: Salesforce-related terminology, but not the standard parameter used in this SAML exchange.

• Approve major information security policies
• Allocate funding and resources
• Set the organization’s risk appetite
• Ensure security supports business objectives

• Evaluating vendors is generally handled by security, procurement, or technical teams.
• Assessing risks is typically performed by security and risk-management professionals, with management accepting or prioritizing the risks.
• Monitoring regulatory adherence is usually handled by compliance, audit, or security functions.

• Import: Copies data into the Power BI model. It requires scheduled or manual refresh, so it may not meet the two-minute requirement.
• Live connection: Connects to an existing Power BI semantic model or Analysis Services model; it is not the appropriate choice for connecting directly to the Azure SQL database in this scenario.

• Help the team identify the causes of delays.
• Encourage continuous improvement through retrospectives.
• Support the team in changing its process, tools, or collaboration methods.
• Help remove impediments that the team cannot resolve independently.

• A: An impediment log may help, but simply maintaining it does not ensure the impediments are resolved.
• B: Directing the team to solutions conflicts with agile self-management.
• C: Adding impediments to the product backlog could delay their resolution and treats them like product features.

1. Start with the 48-bit MAC address.
2. Split it into two 24-bit halves.
3. Insert FF:FE between the halves, creating a 64-bit value.
4. Invert the U/L bit—the seventh bit from the left in the first MAC byte.

text 
MAC:       00:1A:2B:3C:4D:5E 
EUI-64:    02:1A:2B:FF:FE:3C:4D:5E

• FE80 is the prefix commonly used for an IPv6 link-local address, not part of the EUI-64 interface ID.
• The interface ID is not random.
• The MAC address is modified by inserting FF:FE and changing the U/L bit.

• A: Allow SAN certificates — SANs are used to identify valid hostnames in a certificate. They do not bypass trust validation.
• C: Open the secure LDAP port — A blocked port would normally cause a timeout or connection-refused error, not certificate errors.
• D: Increase the TLS version on the RA — The issue concerns certificate trust, not the organization’s registration authority.

1. Product + ProductSubCategory: Inner join

1. Result + ProductCategory: Left outer join

• Entradas grandes, de até aproximadamente 1 GB.
• Processamentos demorados, que podem levar até cerca de 1 hora.
• O cliente envia a solicitação e consulta o resultado depois, sem precisar manter uma conexão aberta durante todo o processamento.

• Real-time inference: indicada para respostas imediatas, com entradas menores e processamento rápido.
• Serverless inference: adequada para cargas variáveis e solicitações menores; não é ideal para processamento longo e arquivos grandes.
• Batch transform: processa grandes volumes em lote, mas não atende à necessidade de respostas próximas do tempo real.

• Filtering or reshaping columns
• Joining with an analysis-specific dataset
• Creating calculated fields
• Applying business logic for a particular project

• Data blending: Combining different data sources, not specifically the final processing step.
• Data enhancement: A broad term for enriching data.
• Data testing: Checking data quality or pipeline correctness.
• Last-mile ETL: The precise term for additional transformations performed after the main pipeline, often directly before analytics or reporting.

• A limited lifetime
• Permissions defined by an IAM role or policy
• The ability to access AWS APIs without using long-term IAM user credentials

• Amazon API Gateway — Builds and manages APIs; it does not generally issue AWS credentials for applications.
• IAM users — Usually use long-term credentials, which are less suitable for applications.
• IAM instance profiles — Provide temporary role credentials to applications running on EC2 instances, but are specifically tied to EC2. The broader requirement described is best met by AWS STS.

Question 3: AWS Storage Gateway File Gateway

• A: S3 bucket per user — S3 is object storage, not a traditional shared file system; mounting it requires extra tools and is less efficient.
• B: File Gateway — Provides a local file share using standard file protocols while storing files in Amazon S3. This preserves convenient local access and extends storage capacity.
• C: WorkSpaces and WorkDocs — Designed for virtual desktops and document collaboration, not large shared file storage.
• D: EC2 with EBS — EBS is attached to one EC2 instance and is not designed for direct multi-user file sharing.

• B — Single customer login across properties: Customer 360 Identity provides centralized identity services, allowing an organization to recognize a customer across multiple digital properties and applications. This helps UC understand authenticated activity as part of a broader customer identity.

• C — Multi-brand support: Customer 360 Identity can support multiple brands and user experiences. Identity services can remain centralized while correlating a customer’s activity across different corporate brands or channels.

• A: Customer 360 Identity does not automatically populate all data into Customer 360 Data Manager and Customer 360 Audiences. Integration and data configuration are still required.
• D: Tracking anonymous activity and linking it after sign-up may be possible through broader customer-data and tracking implementations, but it is not the primary Customer 360 Identity benefit tested here. Identity focuses mainly on authentication, registration, and cross-property identity correlation.

• A: Using an external OAuth 2.0 identity provider could provide unified identity, but it does not specifically address Salesforce capacity or high-volume login limits.
• B: Making the Experience Cloud community a SAML identity provider and using JIT provisioning is a possible federation pattern, but it may not be appropriate for this scale without Salesforce validation.
• C: A default account is unrelated to solving identity unification and high login throughput. Person Accounts can be supported in appropriate B2C Commerce integrations.

• Data lakes: scalable, low-cost storage for structured, semi-structured, and unstructured data.
• Data warehouses: reliable SQL analytics, governance, and performance features.

• Data lake: Primarily provides flexible, scalable storage but may lack warehouse-style reliability and governance.
• Data warehouse: Strong for structured analytics but less flexible for raw and unstructured data.
• All of these: The individual lake and warehouse do not, by themselves, unify the siloed architecture.

• Looking up accounts, contacts, and opportunities
• Logging calls and updating Salesforce records
• Accessing previously available customer information when temporarily offline

• Salesforce Touch App: Primarily an older tablet-focused experience, not the best general solution for the sales team.
• Custom hybrid app: Unnecessary development when Salesforce provides the required capabilities natively.
• SalesforceA: Intended mainly for Salesforce administrators, not sales representatives.

• Voice devices ? VLAN 10
• Data devices ? VLAN 20
• SVI for VLAN 10 ? 192.168.10.1
• SVI for VLAN 20 ? 192.168.20.1

• A: Describes a physical trunk interface, not an SVI.
• B: An SVI can provide management access, but that is not its primary definition here.
• D: SVI does not compensate for insufficient physical ports; it is a logical interface.

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

• Aggregation happens once, during the scheduled job.
• Dashboard users query a relatively small, precomputed table.
• Repeated users do not trigger expensive aggregations against the detailed sales table.
• Overwriting is appropriate because the summary is rebuilt for the reporting period.

• B: Structured Streaming is unnecessary for data that only needs daily refreshes and adds operational/compute overhead.
• C: A view recomputes the aggregation at query time, increasing latency and query cost.
• D: Delta caching may improve reads but does not replace the need to materialize the expensive aggregation, and cache availability is not the main design guarantee.

• Use private connectivity from a cloud provider
• Set up SSO for federated authentication

• Private connectivity—such as a cloud provider’s private endpoint—keeps Snowflake access within the company’s private network path instead of exposing access over the public internet. This fits the VPN/VDI requirement.
• SSO for federated authentication allows Snowflake users to authenticate using the credentials already managed by the company’s identity provider—the same identity system used for VDI—eliminating separate Snowflake passwords.

• Tri-Secret Secure protects encryption keys; it does not provide private network access or credential reuse.
• A proxy Snowflake account outside the VPN conflicts with the requirement that Snowflake have no internet visibility and is not the normal solution for federated login reuse.

1. Which host originated the infection

1. Which remaining hosts are infected

• Leaf switches provide access ports for servers, endpoints, and other devices.
• Spine switches form the fabric’s backbone.
• Every leaf connects to every spine, creating a predictable, high-bandwidth, low-latency path.

• A: Adding both a spine and leaf is unnecessary for simply adding access ports.
• B: Adding a spine does not directly provide endpoint access ports.
• D: A single connection to one spine creates a bottleneck and a single point of failure.

• A. A virtual network gateway
• D. A virtual network

• Azure virtual machines must be connected to an Azure virtual network (VNet). The VNet provides private IP addressing and network connectivity for the VMs.
• A virtual network gateway enables communication between the Azure VNet and the on-premises network, typically through a site-to-site VPN or ExpressRoute connection.

• Load balancer: Distributes traffic among Azure VMs; it does not connect Azure to an on-premises network.
• Application gateway: Provides web-application load balancing and Layer 7 routing; it is not the normal resource for on-premises connectivity.
• Gateway subnet: A gateway subnet is required inside the VNet when deploying a virtual network gateway, but the question’s intended two primary resources are the VNet and virtual network gateway.

• Reusing features across different models and teams
• Consistent feature definitions
• Managing feature versions and metadata
• Using features for both training and inference

• SageMaker Data Wrangler: Prepares and transforms data; it is not primarily a shared feature repository.
• SageMaker Clarify: Helps detect bias and explain model predictions.
• SageMaker Model Cards: Documents models, including intended use, risks, and evaluation results.

• Open or insecure ports
• Enabled legacy or insecure protocols
• Known vulnerabilities and misconfigurations
• Weak services and outdated software

• curl tests web requests and HTTP-based services.
• Wireshark captures and analyzes network traffic; it does not normally scan servers for weaknesses.
• netcat can test connectivity to individual ports and sometimes grab service banners, but it is not a comprehensive vulnerability scanner.

1. Get Data ? Folder in Power BI Desktop.
2. In Power Query Editor, expand the Attributes column to expose metadata such as hidden status and other file attributes.
3. Remove the Content column (and any other data columns you do not need).

• Name
• Extension
• Date accessed
• Date modified
• Folder Path
• Attributes
• Content

• Azure Resource Manager (ARM) templates define Azure resources in a declarative JSON file.
• You can deploy the same template repeatedly for each business unit, ensuring that identical resources are created consistently.
• Templates reduce manual administrative effort and support repeatable, automated deployments.
• Parameters can customize values such as names, regions, and sizes while keeping the overall resource configuration the same.

• Online payment fraud
• Account takeover
• Fake account creation
• Suspicious transactions

• Writing with Apache Spark, typically as Delta tables.
• Reading with Apache Spark for processing and analysis.
• Reading with T-SQL through the lakehouse’s automatically generated SQL analytics endpoint.
• Reading with KQL through Fabric’s query capabilities that can access lakehouse data.

• Eventhouse: Optimized for real-time and KQL workloads, but it is not the natural destination for Spark-based writes or general lakehouse storage.
• Datamart: Intended mainly for relational analytics and Power BI; it is not designed for Spark-based data ingestion.
• Warehouse: Primarily T-SQL-based and structured. It does not provide the same native Spark write experience or flexibility for semi-structured data.

• C — “when the query finishes”

• D — “when the query began”

• A — Add a Path for Stage: A Path lets users update the Opportunity’s Stage directly from the record page, without opening the full edit form. It can also display guidance and key fields.
• B — Use a Kanban list view: Users can move Opportunities between stages by dragging records between columns, which is ideal when Stage is the only field they normally change.

• Identifying the communication strategy: Usually part of a business continuity or incident response plan.
• Evaluating the risk management plan: Part of risk assessment and risk management activities.
• Establishing backup and recovery procedures: Usually part of disaster recovery planning.
• Developing the incident response plan: Part of incident response planning.

• 25 — Traditional SMTP server-to-server delivery; often restricted for client submission and not inherently encrypted.
• 110 — POP3 for retrieving email; unencrypted by default.
• 143 — IMAP for retrieving and synchronizing email; unencrypted by default.
• 587 — Authenticated SMTP submission, commonly secured with STARTTLS.

• Multiple nodes: Data is replicated several times in the primary region.
• Separate geography: A copy is asynchronously replicated to a secondary Azure region.
• Readable secondary: RA-GRS provides read-only access to the secondary replica, even when the primary region is available.

• GRS: Replicates to another region but the secondary copy isn’t normally readable.
• ZRS: Replicates across availability zones in the same region, not a separate geographic region.
• LRS: Keeps replicas within a single datacenter or region and provides no geographic redundancy.

• Confirm the required columns and data types
• Identify the target/label column
• Handle missing or duplicate records if present
• Transform data into a suitable format
• Split it into training and validation/test datasets

1. Prepare the training data
2. Select an algorithm or configure AutoML
3. Train the model
4. Evaluate its performance
5. Tune hyperparameters if needed
6. Deploy the model

• A — Custom Button: A button can launch a flow, typically by passing the flow’s URL and record context.
• D — From a Process: A Process can invoke a flow using an Apex action configured for flow invocation. However, this is automation-triggered, not directly accessed by a user.
• B — Quick Action: In current Salesforce functionality, a Flow Quick Action can launch a screen flow directly from a record page. This makes B a valid modern method.
• C — Visual Workflow Launcher: This is not generally listed as a standard access method in current Salesforce terminology; Salesforce commonly uses the Flow component on Lightning pages instead.

• Manage multiple organizations from one hierarchy.
• Enterprise-wide policies, including repository visibility, forking, and GitHub Copilot policies.
• Centralized identity and access management, such as SAML SSO, SCIM provisioning, and—where applicable—Enterprise Managed Users.
• Centralized billing and licensing, including organization and Copilot seat management.
• Enterprise audit log, which aggregates activity across organizations.
• Security and compliance oversight, such as organization security visibility and enterprise-wide controls.
• Enterprise support and account management features, depending on the plan.

• Organization: manages its own repositories, teams, members, and local policies.
• Enterprise: governs multiple organizations and can enforce policies across them.

• The servers run different operating systems: Windows, Linux, and Unix.
• Containers generally share the host operating system’s kernel, so they cannot normally run workloads requiring unrelated kernels, such as Windows and Linux, on the same Linux host.
• A hypervisor can create separate virtual machines, allowing each VM to run its own guest OS.
• A Type 2 hypervisor runs on top of a host operating system and can support multiple guest operating systems.

1. Selling price per unit: $750
2. Required annual return:

1. Required profit per unit:

1. Target cost per unit:

• Identity provider (IdP): Authenticates users and asserts their identity.
• Service provider (SP): The application being accessed—in this case, Salesforce/the employee portal.
• Identity store: A directory that stores user identities, such as Active Directory.
• Authentication store: A system used to validate credentials.

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

• A — VARIANT "null" values are not the same as SQL NULL: Correct.

• B — Frequent, single-row DMLs: Incorrect.

• C — Validate data before loading into the target table: Correct.

• D — Use staging tables to manage MERGE statements: Correct.