CFA CFA I Exam Prep
CFA Level I Chartered Financial Analyst (Page 332 )

• A is correct: It establishes the revised dates and identifies the effect on the critical path.
• B is premature: Stakeholders should be informed after the impact has been assessed and the updated schedule is understood.
• C is not automatically appropriate: Fast-tracking may introduce additional risk and should be considered only after analyzing schedule options.
• D is premature: Adding resources may not resolve a dependency and could increase costs without addressing the actual constraint.

• Act as the default gateway for devices in that VLAN
• Route traffic between different VLANs
• Provide management access to the switch

text 
interface vlan 10 
 ip address 192.168.10.1 255.255.255.0

• Disable high concurrency: Changes workspace-wide behavior and is not the targeted way to isolate these workloads.
• Modify the number of executors: Adjusts capacity and performance, but does not provide workload isolation.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

• Share files with the wrong people
• Use public links unnecessarily
• Fail to classify sensitive data
• Upload data to unauthorized services
• Misunderstand company sharing policies

• A — Step-up authentication: Helps protect administrator accounts, but does not directly address improper file sharing by users.
• C — Password complexity: Helps reduce password attacks, not accidental data disclosure.
• D — Mobile device management: Secures managed mobile devices, but does not directly control file-sharing behavior across the organization.

• Accept: Acknowledging the risk and choosing not to take additional action.
• Transfer: Shifting the risk or financial consequences to another party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or access restrictions.
• Avoid: Eliminating the activity that creates the risk.

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

• B. Deploy to a SageMaker endpoint: This is needed for SageMaker-hosted models, not for a model intended to be used directly in Amazon Bedrock.
• C. Register with SageMaker Model Registry: SageMaker Model Registry is unrelated to invoking custom models in Bedrock.
• D. Grant access in Bedrock: Access permissions may be necessary, but they do not replace the required provisioned capacity.

• A local network gateway represents an on-premises network—its address space and VPN device information—for an Azure Site-to-Site VPN connection.
• It does not control which connection types are allowed between Azure web servers and database servers.
• It is also unnecessary when both server groups are in the same Azure virtual network.

• The message came from the claimed sender (authentication)
• The message was not altered in transit (integrity)
• The sender cannot easily deny having signed and sent it (non-repudiation)

• Compliance standards: May be a reason in some organizations, but it is not the primary security benefit.
• Increase delivery rates: Digital signatures do not generally improve email delivery.
• Block phishing attacks: Signatures can help recipients verify legitimate messages, but they do not block phishing by themselves.

• The connected switch
• The switch’s port/interface
• Device and port descriptions
• Sometimes VLAN or management information

• IKE: Establishes security associations for IPsec VPNs.
• VLAN: Defines logical network segmentation; it does not identify a physical switch port.
• netstat: Displays local network connections and statistics, not the upstream switch and port.

• A — Use a custom controller: An Apex class can contain the page’s logic.
• C — Use a standard controller with extensions: The standard controller provides basic CRUD behavior, while an extension adds custom logic.
• E — Use a standard controller: Useful when the page works mainly with one Salesforce object and needs standard functionality.

• A page with no controller for static or controller-free content.
• A custom controller with extensions; extensions are not limited only to standard controllers.

• Design Studio > Emails ? create an email-template folder
• Design Studio > Landing Pages ? create a landing-page-template folder
• Add the relevant assets to each folder
• Right-click the folder and choose Share Folder
• Select the destination workspaces

• Free: Doesn’t support the required custom domain and SSL configuration.
• Shared: Doesn’t provide the required SSL support or scalability.
• Basic: Supports multiple instances and SSL, but its storage limit is insufficient for the required 12 GB.
• Standard: Supports:

• CHAP: Uses a challenge-response exchange, so the password is not directly transmitted.
• IPsec: Provides authentication, integrity, and encryption for IP communications.
• EAP: An authentication framework that supports stronger methods, such as certificates or token-based authentication.

• Driver node: Coordinates Spark jobs and runs in the compute environment.
• Worker node: Executes tasks and processes data.
• Databricks Filesystem (DBFS): Provides storage access for data used by compute resources.

• 10.2.1.0 — network address
• 10.2.1.1 — usable host
• 10.2.1.2 — usable host
• 10.2.1.3 — broadcast address

• Allow only approved MAC addresses
• Limit the number of learned addresses
• Shut down or restrict a port when a violation occurs

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the direct control for limiting MAC addresses on switch ports.
• NGFW: Filters routed network traffic, while this attack targets Layer 2 switch behavior.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Sustainability
• Performance efficiency
• Reliability

• Complex inputs: A queueable job can accept and retain complex data such as Map<Id, Project__c> and List<Account>.
• Callouts: The class should implement both:

apex 
  public class ProjectJob implements Queueable, Database.AllowsCallouts { 
      // execute method 
  }

• Execution confirmation: System.enqueueJob() returns an AsyncApexJob ID. You can use that ID to query job status and confirm whether the job completed successfully.

• @future(callout=true) supports callouts, but future methods have more restrictive parameter types and return no job ID for tracking.
• Database.AllowsCallouts is only an interface that permits callouts; it is not an asynchronous mechanism by itself.
• Schedulable is intended for jobs that run at a scheduled time, not primarily for submitting a long-running asynchronous operation.

• Limiting the number of MAC addresses allowed on a switch port
• Restricting ports to specific known MAC addresses
• Taking an action—such as dropping frames or shutting down the port—when the limit is exceeded

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but is not the primary control for switch-port MAC limits.
• NGFW: Filters network traffic at the firewall, but does not directly control MAC addresses learned by a switch.

• Matching hashes: The software likely has not changed.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily detect changes.
• Baselines: Define an approved system or configuration state, but they are not the specific integrity mechanism here.
• Tokenization: Replaces sensitive data with substitute values.

• A: Not expanding would increase its dependence.
• B: More business from the same corporation would make dependence worse.
• D: Passing work to other minority businesses does not solve its own dependence.
• E: The passage does not suggest that it can force or influence the corporation to give work to others.

1. The original app version exists.
2. You create and publish a new version, so there are now two versions.
3. When you restore the previous version, Power Apps does not delete or overwrite the newer version. Instead, it creates another version based on the restored one.

• Original version
• Newly created and published version
• New version created by the restore operation

• Products ? OrderHistory: Products is 1, OrderHistory is many (1:*)

• Date ? OrderHistory: Date is 1, OrderHistory is many (1:*)

1. Version 1.0.0.0 — original published version
2. Version 2.0.0.0 — newly created and published version
3. Version 3.0.0.0 — new version created when version 1 is restored

• Training data for potential bias before model training
• Trained models for bias in predictions
• Model features to help explain how they influence predictions

• A: RAG workflows are typically built using services such as Amazon Bedrock, knowledge bases, and data sources.
• B: Monitoring model quality in production is primarily associated with SageMaker Model Monitor.
• C: Documenting model details is handled by capabilities such as SageMaker Model Cards.

• API tool matcher: runs a deterministic normalization command after the API tool returns.
• Write/Edit matcher: checks whether the target path begins with src/api/ and runs the linter.

json 
{ 
  "hooks": { 
    "PostToolUse": [ 
      { 
        "matcher": "api_tool", 
        "hooks": [ 
          { "type": "command", "command": "normalize-to-snake-case" } 
        ] 
      }, 
      { 
        "matcher": "Write|Edit", 
        "hooks": [ 
          { "type": "command", "command": "lint-if-under-src-api" } 
        ] 
      } 
    ] 
  } 
}

• MFA: Protects sign-in and authentication.
• Azure Key Vault: Protects deployment secrets and credentials.
• Answer: No (B).

• Data source: Folder
• Transformation: Remove the Content column (or keep only the file-metadata columns)

Why

• File name
• Extension
• Date modified
• Folder path
• Content — the binary contents of the file

• Which host first communicated with the suspected malicious source
• Whether that host initiated suspicious traffic or merely received it
• Which other hosts show evidence of infection, such as connections from the originating host
• Which hosts have no related suspicious activity and are therefore clean

• An outbound connection to a suspicious external address
• A downloaded or executed malicious file
• Later lateral connections from that host to other internal systems
• Firewall logs showing the direction and timing of the traffic

• Information sources: Collect security-related data, such as network packets, system logs, audit records, or application events.
• Analysis: Examines the collected data to identify suspicious activity, attacks, or policy violations.
• Response: Takes or recommends action, such as generating alerts, logging the event, or supporting a protective response.

Recommended process

1. Access each switch’s terminal.
2. Use help to identify available commands.
3. Use the MAC table command, such as:

text 
   show mac-address-table

1. Use VLAN information, such as:

text 
   show vlan

1. Use interface information, such as:

text 
   show ip interface brief

1. Record each device’s:

• Red team: Offensive security; attempts exploitation and simulates attackers.
• Blue team: Defensive security; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team activities to improve defenses, but is not the best direct answer here.
• White team: Usually oversees or coordinates an exercise, including rules of engagement and scope.

1. Open the Microsoft Entra Connect wizard.
2. Select Configure.
3. Choose Customize synchronization options.
4. Authenticate when prompted.
5. On the Domain and OU filtering page, select:

1. Complete the wizard.

• Start-ADSyncSyncCycle only starts synchronization; it does not change which OUs are included.
• Manage federation configures federation settings, which are unrelated to OU filtering.
• Add-ADSyncConnectorAttributeInclusion concerns connector attributes, not selecting additional OUs for synchronization.

• Default route: 0.0.0.0/0; used only when no more specific route exists.
• Network route: A route covering the destination, such as 10.10.13.0/24.
• Host route: An exact 10.10.13.10/32 entry in the routing table.
• Floating static route: A backup static route with a higher administrative distance.

• Complex inputs: Queueable jobs can accept objects such as Map<Id, Project__c> and List<Account> through the class constructor.
• Long-running callouts: Implement Database.AllowsCallouts in the Queueable class.
• Confirmation/status: System.enqueueJob() returns an AsyncApexJob ID, which can be used to query job status and determine whether execution completed successfully.

apex 
public class ProjectQueueable 
    implements Queueable, Database.AllowsCallouts { 


    private Map<Id, Project__c> projects; 
    private List<Account> accounts; 


    public ProjectQueueable( 
        Map<Id, Project__c> projects, 
        List<Account> accounts 
    ) { 
        this.projects = projects; 
        this.accounts = accounts; 
    } 


    public void execute(QueueableContext context) { 
        // Perform the callout 
    } 
}

• @future(callout=true) supports callouts, but future methods accept only primitive values or collections of primitives—not complex sObjects or maps of sObjects.
• Database.AllowsCallouts
 Hyderabad, India