Checkpoint 156-215.80 Exam Actual Questions
Check Point Certified Security Administrator (CCSA R80) (Page 51 )

• Security Development Operations (SDO): a security-focused take on DevOps, integrating security into the development pipeline.
• Service Data Object (SDO): a data representation used in some middleware or enterprise apps.
• Software-Defined Overlay (SDO): a networking overlay concept.
• Secure Data Object: a generic data-security term.

• A: True. You can change the size of a Virtual Warehouse after creation (via UI or ALTER WAREHOUSE).

• B: True. A warehouse can be resized while it’s running; the resize will take effect without needing to stop queries.

• C: True. A warehouse can be configured to suspend after a period of inactivity (AUTO_SUSPEND).

• D: True. A warehouse can be configured to auto-resume when new queries are submitted (AUTO_RESUME).

• A. Extranet
• B. VLAN
• C. Intranet
• D. VPN

• On-Demand: You pay by the hour with no long-term commitment. This is ideal for workloads that are infrequent or have highly variable usage. Since this job runs only 24 hours once per year, you pay only for those 24 hours, with no wasted upfront or long-term payments.
• Reserved Instances: Require a 1- or 3-year commitment and pay for capacity whether you use it or not. For a workload that runs just 24 hours a year, you’d be paying for most of the term unused, making it far less cost-efficient.
• Spot Instances: Can be interrupted whenever AWS needs capacity, which is unacceptable for an uninterruptible workload.
• Dedicated Instances: Generally more expensive and aimed at licensing or compliance requirements; not needed for this use case.

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• A assigned without var becomes a global variable (in non-strict mode). So after myFunction(), a = 5 is accessible.
• b is declared with var inside the function, so it’s local to that function (function-scoped). It’s not defined in the outer (global) scope.

• console.log(a) prints 5.
• console.log(b) throws a ReferenceError: b is not defined.

1. Ingestion Lambda receives requests from API Gateway and places messages in an SQS queue.
2. Processing Lambda is triggered by the queue and loads records into Aurora PostgreSQL.

• Decoupling: API request handling is separated from database loading.
• Buffering: SQS absorbs bursts when incoming traffic exceeds the database’s processing capacity.
• Controlled concurrency: Configure the SQS-triggered Lambda’s concurrency and batch size to avoid overwhelming Aurora or exhausting database connections.
• Automatic retries: Messages that fail processing can return to the queue and be retried. A dead-letter queue can capture persistent failures.
• Lower operational effort: The solution remains serverless and avoids managing EC2 servers or Kubernetes clusters.

• A: EC2 and Tomcat add server-management overhead.
• B: DynamoDB/DAX would require changing the database model and does not solve the Aurora ingestion design.
• C: SNS is useful for notifications and fanout, but SQS is better for durable buffering and backpressure in this producer-consumer workflow.

• IaaS: You deploy and manage virtual machines, operating systems, disks, and networking. Azure manages the physical datacenter and host infrastructure.
• PaaS: Azure manages the operating system and runtime so you can focus on deploying applications, such as with Azure App Service or Azure Functions.
• SaaS: You consume a complete, provider-managed application.

• Correct answer: A. System characterization

• Why the other options are not correct:

• Control plane: Managed by Databricks and contains the Databricks web application, workspace services, cluster management, and job orchestration.
• Data plane: Runs in your cloud account and contains compute resources such as:

• Worker node: Data plane compute.
• Driver node: Data plane compute.
• JDBC data source: Usually an external data system.
• Databricks Filesystem (DBFS): Provides storage access and is backed by cloud object storage rather than being entirely part of the control plane.

• The correct answer is “Think and work holistically” (Option B).

• Focus on value: ensures outcomes matter to stakeholders, but isn’t specifically about end-to-end delivery.
• Optimize and automate: about efficiency and performance, not the holistic view.
• Collaborate and promote visibility: about teamwork and sharing information, not the end-to-end scope.

• The correct answer: B) Synthetic identity theft.

• Synthetic identity theft involves creating a new, forged identity by combining information from multiple real people (e.g., names, dates of birth, SSNs) to commit fraud.
• In the scenario, Adam “created a new identity by obtaining information from different victims,” which matches the idea of synthesizing data to form a fake person.

• Medical identity theft: using someone’s medical information to obtain care or services.
• Tax identity theft: using someone’s personal info to file fraudulent tax returns.
• Social identity theft: impersonating someone to deceive others socially or publicly.

• Look for phrases like “create a new identity” or “combine information from multiple people” to identify synthetic identity theft.

• Statement 1: Admin1 must approve requests for the Agent ID Developer role — No

• Statement 2: Admin2 can approve requests for the AI Administrator role — No

• Statement 3: Admin3 can assign User1 a two-day active assignment for the Agent ID Developer role — Yes

• A recipient who already has a Microsoft account or an organizational account can authenticate by signing in.
• A recipient without a usable Microsoft identity may receive a one-time passcode by email.
• The passcode is sent to the same email address that was invited and is used to verify ownership of that address.

• Correct answer: All four statements are true (A, B, C, and D). The given key (A,B) is likely incorrect.

• A) Customers can change the size of the Warehouse after creation — Yes. You can resize a virtual warehouse after it’s created using ALTER WAREHOUSE ... SET WAREHOUSE_SIZE.
• B) A Warehouse can be resized while running — Yes. Snowflake supports online resizing; you can change the size without stopping queries.
• C) A Warehouse can be configured to suspend after a period of inactivity — Yes. You can enable auto-suspend with a delay (AUTO_SUSPEND).
• D) A Warehouse can be configured to auto-resume when new queries are submitted — Yes. You can enable auto-resume (AUTO_RESUME) so a suspended warehouse automatically resumes on new queries.

• Example commands:

• Even if a warehouse is resizing or auto-suspending, queries will be queued and then executed once the warehouse has the appropriate capacity.

• The correct AAA mapping (per Cisco objectives) is:

• Why the given options aren’t fully correct:

• Quick takeaway: when you configure AAA, you should conceptually map them as:

• Example commands (to reinforce concepts):

• In Spark, an executor is a JVM that can have multiple cores. Each task can consume some CPUs (spark.task.cpus).
• The executor’s resources are effectively partitioned into slots, where each slot can run one task. The number of slots per executor is roughly spark.executor.cores / spark.task.cpus.
• Therefore, multiple tasks can run in parallel within the same executor (via these slots). So the statement “Tasks run in parallel via slots” is correct.

• A: A slot is not another name for an executor; a slot is a unit inside an executor.
• B: There’s no requirement that there must be fewer executors than tasks; tasks can be scheduled over time across the available slots.
• C: An executor can run more than one core; it’s not limited to a single core.
• D: There isn’t a rule that there must be more slots than tasks; tasks can wait if slots aren’t available, and you can have equal or even fewer slots than concurrent tasks.

• A private IP address on the virtual network
• An associated public IP address

• Multiple AWS accounts: Create a separate account for each department or workload. This provides clear isolation and makes it easier to track each department’s usage and costs for chargeback.
• Consolidated billing: AWS Organizations can combine billing for multiple accounts into one central payer account. The company can still view costs by account while managing payment centrally.

• Placement groups: Control how EC2 instances are physically placed for networking or performance; they do not provide departmental billing separation.
• Edge locations: Infrastructure used by services such as Amazon CloudFront; unrelated to chargeback.
• AWS Config: Records and evaluates resource configurations and compliance; it is not a billing-separation mechanism.

• A private IP address on the virtual network
• A public IP address associated with its IP configuration

• Answer: D: Making business cases for improvement action

• Continual Improvement focuses on identifying and planning improvements and ensuring they’re funded and prioritized. Creating a business case for an improvement action is part of justifying and obtaining support/resources to implement improvements.
• A (Identifying the cause of incidents) aligns with Problem Management.
• B (Authorizing changes) aligns with Change Enablement.
• C (Logging/managing incidents that result in improvement opportunities) aligns with Incident Management, not Continual Improvement.

• The correct answer is Mass Transfer Tool.

• The Mass Transfer Records tool is Salesforce’s built-in way to reassign ownership of existing records in bulk. In this scenario, you need to transfer ownership of the departed rep’s accounts and opportunities to a new rep while keeping the team structure intact.

• Go to Setup > Data Management > Mass Transfer Records.
• Choose the object: Accounts (and then Opportunities, if needed).
• Set “Transfer From” (the leaving rep) and “Transfer To” (the new rep).
• Decide whether to transfer related records as well (e.g., opportunities tied to accounts) and proceed.
• Review and confirm.

• Data Loader / Data Import Wizard are for bulk import/export, not bulk reassigning ownership.
• Dataloader.io is a third-party tool; the built-in Mass Transfer tool is the standard Salesforce method for this task.

• What each role allows at the storage account scope:

• Why someone might say it’s not correct in this question:

• Practical takeaway:

• D. Provide public endpoints to store and retrieve data

• E. Manage the infrastructure layer and the operating system

• Classifying data
• Configuring access permissions, such as IAM policies
• Selecting or configuring available encryption options, depending on the requirement

• Correct answer: D — use the same hashing algorithm as the sender's to create a numerical representation of the file.

• Integrity is verified by recomputing the hash on the received data and comparing it to the sender’s hash. This must use the same hash function; if you use a different algorithm, the digests won’t match even if the data is intact.
• The hash output is a fixed-length digest (a numerical representation). Whether you call it a “binary image” or a “numerical representation,” the key is that you generate the same type of digest with the same algorithm and compare them.

• A: same algorithm but the result is described as a binary image instead of a digest; you still compare the digest, but the phrasing is less precise.
• B/C: using a different algorithm would produce a different digest, causing false mismatch or failure to verify integrity.

• A. Custom and standard objects have standard fields. True. Both object types include standard fields (for example, CreatedDate, LastModifiedDate, Owner). Custom objects also have the Name field, which is a standard field on all objects.
• B. Standard objects are included with Salesforce. True. Standard objects (like Account, Contact, etc.) come with Salesforce out of the box.
• C. A new standard object can be created. False. You can create custom objects, but you cannot create new standard objects.
• D. Only standard objects support master-detail relationships. False. Master-detail relationships can be used with both standard and custom objects.

• Domeny tworza restrykcjony razem z typem. Wykorzystujesz je w kolumnach, aby miec spójna walidacje danych w wielu miejscach.
• To nie jest pelny niestandardowy typ z wlasnym input/output funkcjonowaniem. Aby stworzyc typ z wlasnym I/O i operacjami, uzylbys CREATE TYPE (lub rozszerzen w C). Domeny to uproszczona forma ograniczen na istniejacy typ.

• CREATE DOMAIN positive_int AS integer NOT NULL CHECK (VALUE > 0);
• CREATE TABLE orders (id serial, qty positive_int);

• latwo wymuszaja wspólne reguly dla wielu kolumn/naglówków,
• zmiana regul w jednym miejscu (domena) automatycznie wplywa na wszystkie kolumny ja uzywajace.