Free 156-315.81 Exam Braindumps
Check Point Certified Security Expert R81 Questions 146–150 (page: 31)

Updated On: 10-Feb-2026

To accelerate the rate of connection establishment, SecureXL groups all connection that match a particular service and whose sole differentiating element is the source port. The type of grouping enables even the very first packets of a TCP handshake to be accelerated. The first packets of the first connection on the same service will be forwarded to the Firewall kernel which will then create a template of the connection.
Which of the these is NOT a SecureXL template?

  1. Accept Template
  2. Deny Template
  3. Drop Template
  4. NAT Template

Answer(s): B

Explanation:

SecureXL templates are a mechanism to accelerate the rate of connection establishment by grouping connections that match a particular service and whose sole differentiating element is the source port. SecureXL templates enable even the very first packets of a TCP handshake to be accelerated,

without waiting for the Firewall kernel to create a connection entry. The first packets of the first connection on the same service will be forwarded to the Firewall kernel, which will then create a template of the connection. The template will contain all the relevant information for the connection, such as source and destination IP addresses, destination port, NAT information, policy decision, etc. The template will be used by SecureXL to handle subsequent connections on the same service, without involving the Firewall kernel. This reduces the CPU load and increases the throughput.
There are three types of SecureXL templates: Accept, Drop, and NAT. Accept templates are used for connections that are allowed by the Firewall policy. Drop templates are used for connections that are blocked by the Firewall policy. NAT templates are used for connections that require NAT translation. Deny templates are not a valid type of SecureXL template.


Reference:

SecureXL NAT Templates in R80.20 and lower, Part 3 - SecureXL, Security Gateway Performance Optimization - Part 5 - SecureXL



Which of the following is NOT a type of Check Point API available in R81.x?

  1. Identity Awareness Web Services
  2. OPSEC SDK
  3. Mobile Access
  4. Management

Answer(s): C

Explanation:

Check Point API is a set of web services that enable the usage of functions and commands in a dynamic and automated fashion. Check Point API is available in different types, each serving a different purpose and functionality. According to the Check Point Resource Library1, the following are the types of Check Point API available in R81.x:
Identity Awareness Web Services: This type of API allows external applications to send identity and location information to the Security Gateway, which can then use this information for policy enforcement. Identity Awareness Web Services can be used for scenarios such as guest registration, captive portal, identity agents, etc.
OPSEC SDK: This type of API provides a framework for developing applications that interact with

Check Point products using the OPSEC (Open Platform for Security) protocol. OPSEC SDK can be used for scenarios such as log export, event management, anti-virus integration, etc. Management: This type of API allows external applications to perform management operations on the Check Point Management server using RESTful web services. Management API can be used for scenarios such as policy installation, object creation, configuration backup, etc. Mobile Access is not a type of Check Point API, but rather a feature that provides secure remote access to corporate resources from various devices. Mobile Access uses SSL VPN technology and supports different authentication methods and access scenarios.


Reference:

What is an API Gateway?, How to use Check Point API with Postman quick guide, Home - Check Point Developers, Introduction to RESTful APIs and JSON format, Checkpoint API tutorial, part 1 - getting started



When an encrypted packet is decrypted, where does this happen?

  1. Security policy
  2. Inbound chain
  3. Outbound chain
  4. Decryption is not supported

Answer(s): A

Explanation:

When an encrypted packet is received by a Check Point Security Gateway, it is decrypted according to the security policy. The security policy defines the rules and settings for encryption and decryption of traffic, such as the encryption algorithm, the encryption domain, the pre-shared secret or certificate, etc. The security policy is enforced by the Firewall kernel, which is responsible for decrypting the packets before passing them to the inbound chain for further inspection. The inbound chain consists of various inspection modules that apply security checks and actions on the decrypted packets. The outbound chain is the reverse process, where the packets are inspected and then encrypted according to the security policy before being sent out.


Reference:

Check Point Firewall Security Solution, Check Point R81 Cyber Security Platform, Check Point VPN Administration Guide R81



John is using Management H

  1. Which Smartcenter should be connected to for making changes?
  2. secondary Smartcenter
  3. active Smartenter
  4. connect virtual IP of Smartcenter HA
  5. primary Smartcenter

Answer(s): B

Explanation:

Management HA is a feature that allows the Security Management server to have one or more backup Standby Security Management servers that are ready to take over in case of failure1. The Active Security Management server is the one that handles all the management operations, such as policy installation, object creation, configuration backup, etc. The Standby Security Management servers are synchronized with the Active Security Management server and store the same data, such as databases, certificates, CRLs, etc. The Standby Security Management servers can also perform some operations, such as fetching a Security Policy or retrieving a CRL1. To make changes to the system, such as editing objects or policies, the administrator needs to connect to the Active Security Management server. This is because the Active Security Management server is the only one that can modify the data and synchronize it with the Standby Security Management servers. The administrator can use SmartConsole to connect to the Active Security Management server by entering its IP address or hostname1. The administrator can also use SmartDashboard to connect to the Active Security Management server by selecting Policy > Management High Availability. This shows information about the Security Management server that includes its peers - displayed with the name, status and type of Security Management server1.
The other options are incorrect because:
A) secondary Smartcenter: This is a synonym for a Standby Security Management server, which cannot be used to make changes to the system.
C) connect virtual IP of Smartcenter HA: This is not a valid option because there is no virtual IP for Smartcenter HA. Each Security Management server has its own IP address and hostname. D) primary Smartcenter: This is a synonym for the Active Security Management server, but it is not the correct term to use. The term primary implies that there is only one Active Security Management server, which is not true. The administrator can put the Active Security Management server on standby and promote a Standby Security Management server to active at any time1.


Reference:

How to Configure Management HA



You are asked to check the status of several user-mode processes on the management server and gateway.
Which of the following processes can only be seen on a Management Server?

  1. fwd
  2. fwm
  3. cpd
  4. cpwd

Answer(s): B

Explanation:

User-mode processes are processes that run in the user space of the operating system, as opposed to kernel-mode processes that run in the kernel space. User-mode processes are usually less privileged and have less access to system resources than kernel-mode processes. Check Point products use both user-mode and kernel-mode processes to provide various functionalities and services.

The following are some of the user-mode processes that can be seen on the management server and gateway:
fwd: This process is responsible for policy installation, logging, and communication with other Check Point components. It runs on both the management server and gateway. cpd: This process is responsible for licensing, certificate management, and communication with SmartConsole. It runs on both the management server and gateway. cpwd: This process is responsible for monitoring and restarting other processes. It runs on both the management server and gateway.
The following is a user-mode process that can only be seen on the management server:
fwm: This process is responsible for managing the security policy database, compiling the security policy, and generating reports. It runs only on the management server.
Therefore, the correct answer is B)


Reference:

Check Point Processes and Daemons, Check Point Processes Cheat Sheet, Check Point Firewall Security Solution



Viewing page 31 of 127
Viewing questions 151 - 155 out of 628 questions


Post your Comments and Discuss Checkpoint 156-315.81 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!