Checkpoint 156-315.81 Exam Prep
Check Point Certified Security Expert R81 (Page 37 )

• In a Check Point cluster, the number of cores used for the Firewall-kernel on each device is limited by the device with the fewest cores in the cluster. In other words, the cluster uses the minimum core count among all members (the "lowest common denominator").

• Current gateway: 2 cores
• New gateway: 4 cores
• Minimum cores among members = 2
• Therefore, each cluster member (including the 4-core device) can use only 2 Firewall-kernel cores.

• The correct answer is 2 cores per device. The provided answer (4 cores) is incorrect because it ignores the minimum-core rule across the cluster. If both devices had 4 cores, then you could use 4 cores per device.

• Existing expected ROI: 15%
• New project ROI: 14%
• Cost of capital: 12%

• Project return = 14%
• Cost of capital = 12%
• It earns 2% more than the cost of capital, so it should increase shareholder value.

• On VirtualNetworkA: enable Allow gateway transit.
• On VirtualNetworkB: enable Use remote gateways.

• B — Sales staff will tender for riskier contracts:

• C — Sales staff will encroach on other territories:

• D — Sales staff will look for new jobs:

• Case Assignment Rules normalmente são avaliadas quando o caso é criado. Elas podem ser executadas novamente em uma edição somente se o usuário marcar “Assign using active assignment rules”; isso não acontece automaticamente apenas porque o caso foi fechado.
• Portanto, criar uma regra de atribuição não corrige os centenas de casos já fechados e não garante, por si só, que um caso será transferido antes de ser fechado.

• B — Usar uma ferramenta de dados: corrige os registros históricos já existentes, atualizando o Owner.
• D — Criar uma regra de validação: impede que um caso seja fechado enquanto ainda pertence a uma fila. Exemplo conceitual: se Status = Closed e o proprietário for uma fila, bloquear o salvamento.

• Annual interest payments net of tax relief (A): future cash outflows for the issuer.
• Redemption value (B): the final cash outflow when the bond is redeemed.
• Market value now (C): the cash proceeds received now, acting as the initial cash flow in the IRR calculation.

• Distinct values = 69

• Unique values = 4

• Suspended an operator who refused to use unsafe equipment.
• Paid another operator a bonus for using it.
• Prioritised short-term productivity over employee safety.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — The factory’s safety record is likely to be poor.

• S3 Glacier Deep Archive is designed for long-term archival data with very infrequent access and has a lower storage cost than S3 One Zone-IA.
• The documents are copies stored elsewhere, so reduced availability and delayed retrieval are acceptable.
• An S3 interface VPC endpoint allows private access from the VPC without exposing the bucket through the public internet.
• A bucket policy can restrict access to requests coming through that endpoint.

• 25 – Traditional SMTP server-to-server mail transfer; often blocked for client submission and not inherently secure.
• 110 – POP3 for receiving email; unencrypted by default.
• 143 – IMAP for accessing email; unencrypted by default.
• 587 – Authenticated email submission and commonly secured with TLS.

• Red team: Offensive security; attempts exploitation and simulates attackers.
• Blue team: Defensive security; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team activities to improve defenses, but is not the best direct answer here.
• White team: Usually oversees or coordinates an exercise, including rules of engagement and scope.

spl 
error AND host=WWW3 
status=404 OR status=500 
NOT source=access.log

• Quotation marks are used for exact phrases or values containing spaces.
• Parentheses group parts of a Boolean expression, but they are not required for every Boolean search.

• Crowd-sourced evaluation: Requires recruiting and managing many evaluators.
• Human-worker evaluation: Provides human judgment but requires coordination, labeling instructions, and quality control.
• RLHF: Is a training and alignment process, not simply a low-overhead model comparison method.
• Automatic model evaluation: Quickly evaluates outputs using predefined toxicity or quality metrics with minimal manual effort.

• IRR assumes that interim cash flows can be reinvested at the project’s own IRR. This may be unrealistic, especially when the IRR is very high.
• MIRR assumes reinvestment at a specified rate, usually the company’s cost of capital or another realistic reinvestment rate.

• B: MIRR does not specifically favour projects with long payback periods.
• C: MIRR and IRR can rank competing projects differently.
• D: MIRR is not always higher than IRR; it may be higher or lower depending on the cash flows and reinvestment rate.

• Creating and training machine-learning models
• Testing and evaluating models
• Deploying models as usable endpoints

1. Wireless AP

1. Router

1. Firewall

1. Device placement

Recommended process

1. Access each switch’s terminal.
2. Use help to identify available commands.
3. Use the MAC table command, such as:

text 
   show mac-address-table

1. Use VLAN information, such as:

text 
   show vlan

1. Use interface information, such as:

text 
   show ip interface brief

1. Record each device’s:

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• TLS passthrough: A TCP listener does not decrypt traffic. The client establishes TLS directly with the backend, so the backend can perform mutual TLS (mTLS) authentication.
• gRPC over TCP: gRPC commonly uses HTTP/2 over TLS, and an NLB can forward the underlying TCP connections without modifying them.
• Scalability: Registering the Pods as IP targets allows Kubernetes to add or remove Pods as the Horizontal Pod Autoscaler changes the workload. The AWS Load Balancer Controller updates the target registrations.
• Port 443: The NLB can forward TCP traffic on port 443 without terminating TLS.

• An ALB HTTPS listener terminates TLS at the load balancer, violating the requirement that traffic must not be decrypted before reaching the backend.
• Targeting the EKS node group's Auto Scaling group does not directly track dynamically scaling Pods.
• An NLB TLS listener also terminates TLS at the NLB, preventing end-to-end mTLS between the client and backend.

1. Version 1.0.0.0 — original published version
2. Version 2.0.0.0 — newly created and published version
3. Version 3.0.0.0 — new version created when version 1 is restored

• Sales processes: Define the available Opportunity stages for each team.
• Record types: Connect each team to its appropriate sales process and page layout.
• Page layouts: Control which fields and related sections each team sees.

• Solar market team 1
• Solar market team 2
• Installation Services team

• One sales process: Cannot provide different Opportunity stages for each team.
• One page layout: Cannot provide different field arrangements or fields by team.
• Three page layouts alone: Page layouts control fields, but not the available stages.

• Tokens: Individual units of text processed by a model, such as words, subwords, or characters.
• Models: Systems that learn patterns and generate predictions or outputs.
• Binaries: Data represented using the binary number system, not semantic representations.

• Standardize which services users can deploy
• Apply governance and access controls
• Manage approved product versions
• Give users self-service access to authorized resources

• AWS Control Tower: Sets up and governs a multi-account AWS environment.
• AWS Cloud Map: Provides service discovery for applications.
• AWS Clean Rooms: Enables privacy-preserving collaboration on data analysis.

• HTTPS: Secure web traffic, not general command-line server administration.
• SNMPv3: Secure network monitoring and management, not interactive server login.
• RDP: Provides graphical remote desktop access. It can be secure, but it is not the direct replacement for Telnet in this scenario.
• SMTP: Used to send email.

• The message came from the claimed sender (authentication)
• The message was not altered in transit (integrity)
• The sender cannot easily deny having signed and sent it (non-repudiation)

• Compliance standards: May be a reason in some organizations, but it is not the primary security benefit.
• Increase delivery rates: Digital signatures do not generally improve email delivery.
• Block phishing attacks: Signatures can help recipients verify legitimate messages, but they do not block phishing by themselves.

• Low: Applies system, tenant, and user-based suppressions. Activity from locations commonly used by that user is more likely to be suppressed.
• Medium: Applies system and user suppressions.
• High: Applies only system suppressions, so more unusual-location activity generates alerts.

• Azure Cosmos DB is a globally distributed NoSQL database service. It stores and retrieves application data, but it does not provide the complete environment for building, testing, and deploying predictive analytics models.
• Azure Machine Learning is the appropriate service for this requirement. It supports creating experiments, training and testing models, and deploying them for predictions.
• Azure Machine Learning Studio provides the browser-based interface for these tasks.

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Moving the risk’s financial impact to a third party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity that creates the risk.

• Vulnerability scanner: Finds known technical weaknesses in systems or applications, but does not provide complete supply-chain visibility.
• Penetration test: Simulates attacks against defined targets; it is narrower than a full supply-chain analysis.
• SCAP: A set of standards and protocols for automated security configuration and vulnerability assessment, not a comprehensive supply-chain mapping tool.

Why A is the best fit

Why the other options are weaker

• B — Create alerts in Dynamics 365 Finance: Alerts notify users about changes; they do not calculate tax.
• C — Implement the Common Data Model: CDM standardizes data structures but does not provide tax-calculation logic.
• D — Run a Power BI report: Power BI is primarily for analysis and reporting. A report might display tax rates, but it would not normally calculate and apply tax to sales orders operationally.
• E — Write scripts and code: This could work, but it is less aligned with the requirement for a quick, cost-effective implementation because custom development requires more time and maintenance.

• The table is large.
• Queries frequently filter or join on particular columns.
• The table’s natural data order does not support good micro-partition pruning.
• Clustering improves performance enough to justify its maintenance cost.

• A: Describes an update-set conflict, not a Dictionary Override.
• B: Describes a configuration item or change concept.
• C: Describes an approval or workflow activity.

• LastName: Required.
• FirstName: Optional.
• AccountId: Optional; a Contact may be associated with an Account later or remain private, depending on organization settings.
• Name: A compound display field made from first and last name; it isn’t entered as a separate field.

• A — .gitignore: Controls Git tracking; it does not configure Copilot exclusions.
• B — copilot.ignore: This is not the standard GitHub Copilot Business exclusion mechanism.
• D — Renaming files: Adding _no_copilot has no recognized effect.

• Review the risk register.
• Check the documented risk response strategy, such as using a backup resource, reallocating work, or adjusting sequencing.
• Implement the planned response promptly.

• B: Moving the task may affect the critical path and should not be done without first evaluating the planned response and impacts.
• C: Excluding a required task would change scope and business requirements without proper analysis or approval.
• D: Updating lessons learned and the risk log may be appropriate later, but it does not address the immediate problem. First, execute the response.

• Where to find the TiMOS runtime image
• Which configuration file to load
• The IP address and related settings for the CPM management Ethernet port

• A: User authorization is configured in the router’s security configuration, not primarily in the BOF.
• C: Hardware initialization is performed by the boot process and system software.
• D: The system date and time are configured separately, often through NTP or CLI settings.

• Base table — the table containing common inherited fields
• Parent table — the table directly extended by the child
• Other tables in the hierarchy

1. Open Notepad as Administrator.
2. Open:

1. Remove or correct the line mapping the website to the wrong IP address.
2. Save the file.
3. Optionally run:

cmd 
   ipconfig /flushdns

• Share of overall contribution: part of the organization’s total contribution is allocated to the supplying division.
• Dual pricing: the supplying division may record a higher transfer price while the receiving division records a lower price, with central accounts absorbing the difference.
• A centrally imposed price range: this may allow the transfer price to be set above variable cost, helping the supplying division recover fixed costs.

• C — Before update
• D — Before insert

apex 
trigger AccountTrigger on Account (before insert, before update) { 
    for (Account acct : Trigger.new) { 
        acct.Description = 'Updated automatically'; 
    } 
}

• In after insert and after update, Trigger.new records are read-only.
• Use after triggers when you need the record’s final database Id or want to create/update related records.
• Attempting to change a field directly in an after trigger causes a read-only error.

• Disabling a compromised account
• Blocking a malicious IP address
• Isolating an endpoint
• Creating or escalating an incident ticket

• Virus signatures: Primarily associated with antivirus or endpoint protection.
• Security agent deployment: Usually handled by endpoint-management or security-agent platforms.
• Vulnerability scanning: Typically performed by vulnerability-management tools.

• To identify the number of errors: select Column quality. It shows the percentage and count of Valid, Error, and Empty values for each column.
• To resolve errors: use the appropriate error transformation:

• Packet capture: Collects and analyzes network traffic; it does not describe the scan type.
• Privilege escalation: Attempts to gain higher permissions after obtaining access.
• System enumeration: Identifies systems, services, or resources, but is not specifically defined by the lack of credentials.
• Passive scan: Observes traffic without actively probing systems. A vulnerability scan is generally an active assessment.

• COE: Identifies the Center of Excellence, such as Payroll or Benefits.
• Topic Detail: Classifies the HR service within its COE; it does not identify the catalog item.
• Template: Supplies default values or case configuration.
• Record Producer: Represents the catalog item that employees use to submit the request and create the case.

• Identity: User-assigned managed identity

• Authorization: Azure RBAC

• Frequency/likelihood = how often or how likely the risk is to occur.
• Severity/impact = how damaging or costly the consequences would be.

• A minor equipment fault occurring frequently may have high frequency but low severity.
• A major cyberattack occurring rarely may have low frequency but high severity.
• A risk that happens often and causes substantial losses has high frequency and high severity.

• Controlar o fluxo de dados entre S3 e SageMaker;
• Aplicar regras de segurança por meio da VPC;
• Reduzir a exposição dos dados;
• Permitir acesso privado ao bucket do S3.

• Amazon Inspector: avalia vulnerabilidades, mas não gerencia o fluxo de dados.
• Amazon Macie: ajuda a descobrir e proteger dados sensíveis no S3, mas não cria a conexão com o SageMaker.
• S3 Glacier Deep Archive: é uma classe de armazenamento para arquivamento, não uma solução de conectividade.

• NTLM: Uses Windows challenge-response authentication and does not provide the normal web-based MFA redirect flow.
• Single Sign-On: Automatically reuses existing credentials; it is intended to avoid prompting, not to support an MFA workflow.
• Transparent: Intercepts the session without redirecting the user to a separate authentication page.

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2