Free L4M7 Exam Braindumps
Whole Life Asset Management Questions 129–133 (page: 9)

Updated On: 1-Feb-2026

XYZ Inc opens a tender to purchase new forklift trucks for their new established warehouse. In the final round, there are two suppliers remain who offer two different bids. Supplier A's bid has high initial investment. After calculating the net present value, the NPV in year five is positive. On the other hand, supplier B's bid has low purchase price, with the NPV in year five is negative. If the NPV is the sole selection criterion, XYZ Inc should select the bid which has...?

  1. Positive NPV
  2. The lowest NPV
  3. Zero NPV
  4. Negative NPV

Answer(s): A

Explanation:

Net present value (NPV) is the 'today' net value that deprives from 'future' cash flow of an invest- ment or a capital purchase. Net Present Value is a helpful tool for assessing the total lifetime value of an investment. Procurement professionals or investors can base on this value to make decision to achieve value for money. Generally, an organisation should select the offer which has the highest NPV among their options. Preferably, the NPV of an capital investment should be positive, which means the investment eventually adds value to the business.


Reference:

CIPS study guide page 177
LO 3, AC 3.2



Which of the following purchases are most likely to have low acquisition costs? Select TWO that apply.

  1. Purchase of ERP system
  2. Purchase of standard catalogued products
  3. Straight re-buy from a current supplier
  4. Spot purchase of a technically complexed machinery
  5. Procurement of construction projects

Answer(s): B,C

Explanation:

According to L4M7 study guide, acquisition costs in procurement are the costs associated with the activities involved in a purchase. A buying organisation incurs acquisition costs in low-value purchases as well as high-value purchases. The following purchases tend to have lower acquisition costs:
- Straight re-buy from a current supplier
- Purchase of standard catalogued products
Otherwise, any purchases of high value, high-risk items generally require greater attention of buying organisation and thus, they are likely to have higher acquisition costs. Spot purchase of a technically complexed machinery, Purchase of ERP system and Procurement of construction projects are examples of high-value, high-risk purchases.


Reference:

CIPS study guide page 148-149
LO 3, AC 3.1



The width of aisles within a warehouse is determined by...?

  1. Turning cycle of forklift and the size of pallets
  2. The length of storage racking
  3. The location of goods-in and goods-out doors
  4. The height of the building

Answer(s): A

Explanation:

Below is a formula from Toyota you can use to make an informed decision.
1. Start with the basic right-angle stacking width
2. Add the load length
3. Add 12 inches for clearance
The basic right-angle stacking width is the smallest amount of space a forklift needs turn in order to insert its forks into a pallet. You can find basic right-angle stack measurements in the equipment manual or by contacting TMHNC if your business is located in Northern California. This measurement does not include the length of the load or room need for clearance. Load lengths vary depending on your application, products, etc. As a starting point, a standard pallet has a 48-inch load length. Always check your forklift's data plate for the rated capacity (which is affected by attachments and other factors).

Adding 12 inches for clearance ensures you have enough room for your forklift's turn radius and helps protect against damage from operator error and/or product that may hang over the edge of the pallet.


Reference:

- CIPS study guide page 29-30
- How to Calculate Forklift Aisle Width Minimums
LO 1, AC 1.1



To make loading/unloading more effective and efficient, which feature should be included in vehi-cle dock design?

  1. Steeper slope will reduce the chance of errors and accidents
  2. 'Dual-use' docks are always the most efficient
  3. Vehicle docks only require a small area to ensure faster goods flow
  4. The dock platform is almost at the same level as the height of the trailer's rear platform

Answer(s): D

Explanation:

Warehouse dock is a feature of warehouse design - used for unloading and loading vehicles. It is crucial to carefully design where they are externally located in a facility and choose the best type of dock depending on the available space.
In many cases efficient and effective loading and unloading is achieved by a dock design that places the loading and unloading vehicle' rear platform at the same height as the warehouse floor. Slopes in docking areas must always be as small as possible: the gentler the slope, the less chance of errors and accidents. If a warehouse is going to be used by large volume vehicles, such as high cubes, it may be necessary to install special devices, such as hydraulically adjustable docks or ground level lift platforms.
Current trends indicate that vehicles that are longer and wider and have a greater volume will be increasingly common. Therefore, when planning the location of the docks, it would be useful to ensure that there is a large area for the approach, manoeuvring and build-up of large vehicles. One option to increase the efficiency of the docks is to combine reception and dispatch into a single area (dual use). This solution drastically reduces costs and, above all, increases the use of handling equipment and personnel. However, if this is justified by the volume of material flows, there can also be separate access points for each function (some for reception and others for dispatch - 'sole use').


Reference:

- Warehouse docking areas - Interlake
- CIPS study guide page 13
LO 1, AC 1.1



Which of the following are subjective forecasting techniques? Select TWO that apply.

  1. Delphi method
  2. Test marketing
  3. Cycle counting
  4. Pareto principle
    Weighted moving average

Answer(s): A,B

Explanation:

The most common subjective forecasting techniques include the following:
- Market surveys
- Employee surveys
- Expert knowledge (Delphi method is a method using expert knowledge)
- Test marketing
Cycle counting is a periodic analysis of inventory in a storage location which is conducted through the counting of samples instead of physically counting the entire inventory available, so as to quickly have an accurate estimate of the inventory available without causing a stop to the day to day working as is the case with physically counting every unit. The Pareto principle (also known as the 80/20 rule, the law of the vital few, or the principle of fac-tor sparsity) states that, for many events, roughly 80% of the effects come from 20% of the causes. Weighted moving averages assign a heavier weighting to more current data points since they are more relevant than data points in the distant past. The sum of the weighting should add up to 1 (or 100 percent).


Reference:

CIPS study guide page 109-111
LO 2, AC 2.3



Viewing page 9 of 28
Viewing questions 41 - 45 out of 255 questions


Post your Comments and Discuss CIPS L4M7 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!