Private VLANs have been configured in the data center. Which type of Private VLAN port would allow a new server to communicate with all other interfaces?

isolated
community
private
promiscuous
shared

Answer(s): D

Show Answer Next Question

QUESTION: 59

Which characteristic of community ports in a PVLAN is true?

can communicate with isolated ports
cannot communicate with other community ports in the same community.
can communicate with promiscuous ports
are separated at Layer 3 from all other ports

Answer(s): C

Show Answer Next Question

QUESTION: 60

Which option is a Cisco best practice when configuring traffic storm control?

Configure 100 percent level to suppress all traffic.
Configure on the port channel interface of an EtherChannel.
Configure traffic storm control on ports that are members of an EtherChannel.
Configure additional capacity as port speed increase.

Answer(s): B

Show Answer Next Question

Download PDF Next Page

Viewing page 16 of 110
Viewing questions 76 - 80 out of 438 questions

Post your Comments and Discuss Cisco 300-206 exam prep with other Community members:

Comments:

Name:

300-206 Exam Discussions & Posts (Share your experience with others)

AI Explanation - verified by User5479 on: June 09, 2026
Question 33:
Answer: D
Explanation:

When using a CloudFront-backed setup with an API Gateway REST API and a custom domain, the TLS certificate must be managed in AWS Certificate Manager (ACM) in the us-east-1 region. CloudFront uses certificates from us-east-1, regardless of where your API Gateway region is.

Therefore, import the third-party certificate into ACM in us-east-1.

Then configure your custom domain (in API Gateway) to use that certificate, and create DNS so that your custom domain resolves to the CloudFront/API Gateway distribution. In DNS, this is typically a CNAME record pointing to the distribution’s domain name.

Why the other options are not correct:

- A: ACM cert in the same region as the API is incorrect for CloudFront-backed custom domains. - B: You don’t import certificates into CloudFront directly; ACM is the source. - C: ACM in the API region (not us-east-1) is incorrect for CloudFront.
Note: If you’re using an apex domain, you’d normally use an alias A record in Route 53 instead of a CNAME, but among the given choices, D is the correct approach.
Colima, Mexico

AI Explanation - verified by User9278 on: June 09, 2026
Shared responsibility is a key principle of Microsoft
Yes. Shared responsibility is a key principle in Microsoft’s cloud security model. Microsoft documents the Shared Responsibility Model, where Microsoft is responsible for security “of” the cloud (infrastructure, platform, physical security) and customers are responsible for security “in” the cloud (data protection, identity and access management, configurations, and applicable compliance). This clarifies which controls Microsoft provides and which the customer must implement.
São Paulo, Brazil

AI Explanation - verified by User6173 on: June 09, 2026
Question 2:
Question 2 asks: Which AWS service can assess application vulnerabilities and identify infrastructure deployments that do not meet best practices?

Answer: Amazon Inspector.

Why: Amazon Inspector is designed for automated security assessments of EC2 instances. It scans for vulnerabilities and checks for deviations from security best practices, helping you identify both issues in your applications and misconfigurations in your infrastructure.

Why the others aren’t the best fit:

- AWS Trusted Advisor provides general best-practice checks and optimization suggestions, but it’s not a focused vulnerability scanner. - AWS Config tracks configuration changes and checks compliance rules, but it doesn’t perform vulnerability assessments. - Amazon GuardDuty detects threats and anomalous activity, not vulnerabilities or best-practice deviations.
Lima, Peru

AI Explanation - verified by User7619 on: June 09, 2026
Question 2:
??: B) Amazon Inspector
??:

??: Amazon Inspector? EC2 ????? ?? ?? ??? ??? ??? ?? ?? ?? ??? ???? ???? ????, ?????? ???? ???? ??? ??? ???? ? ?????.

??? ?? ??:

- A Trusted Advisor: ?? ?? ?? ??? ?????, ??? ???? ??? ??? ????. - C AWS Config: ?? ???? ?? ??? ?????, ?? ??? ??? ???? ????. - D AWS GuardDuty: ?? ?? ???? ????? ??? ?????, ??? ??? ?? ?? ???? ? ??? ????.
?? ?:

??? Inspector? ???? Inspector2? ?? ?????. ???? Inspector/Inspector2 ?? ??? ??? ?? ??? ?? ??? ????.

Guri-Si, South Korea

AI Explanation - verified by User9734 on: June 09, 2026
Question 54:
Question 54 explanation:

Answer: D) Replace the keycap

Why: After checking for debris, the next cost-effective fix for a single non-working key is to address the keycap itself. A damaged or mis-seated keycap can prevent a key from registering without replacing more expensive components. Replacing the entire keyboard (A) or the key switch (B) is unnecessary for a single-key issue, and replacing the circuit board (C) is far more invasive and unlikely to be needed. If the problem persists after replacing the keycap, you’d consider testing with an external keyboard or replacing the keyboard.

Moorestown, United States

AI Explanation - verified by User5160 on: June 09, 2026
what is NIDS and WAF

NIDS (Network Intrusion Detection System)

- What it is: A security system that monitors network traffic for suspicious activity and known threats. - Where it sits: At or near the network perimeter or inside segments to observe traffic. - How it works: Uses signature-based or anomaly-based detection to generate alerts when it sees malicious patterns. - What it does: Detects threats and logs events; typically passive (does not block traffic unless paired with other controls like an IPS). - Notes: Won’t usually decrypt TLS traffic by itself; focuses on network-layer indicators.

WAF (Web Application Firewall)

- What it is: A security solution that filters and monitors HTTP/HTTPS traffic to and from web applications. - Where it sits: In front of the web app (often as a reverse proxy, inline appliance, or cloud service). - How it works: Applies rule sets and behavior-based checks to understand web app requests (URLs, headers, parameters, cookies) and blocks malicious payloads. - What it protects: Common web app attacks (SQL injection, XSS, CSRF, etc.) and can enforce application-specific policies. - Notes: Primarily protects web traffic; may offer bot protection and rate limiting.

How they relate: They complement each other—NIDS guards network traffic in general, while a WAF focuses on protecting web applications specifically.

Queens, United States

AI Explanation - verified by User8690 on: June 09, 2026
Question 87:
Question 87 asks why the GRE tunnel interface goes into TUN-RECURDOWN with: “Interface Tunnel 0 temporarily disabled due to recursive routing.”

Correct answer: C — Because the best path to the tunnel destination is through the tunnel itself.

Explanation:

Recursive routing (RECURDOWN) occurs when the route to the tunnel’s remote endpoint is learned via the tunnel interface itself. The router would have to use the tunnel to reach the next-hop, which creates a loop, so the tunnel is disabled to prevent that.

In practice, fix by ensuring there’s a non-tunnel path to the tunnel endpoint (e.g., static/dynamic routes via a physical interface or another non-tunnel route), not via the tunnel.

Why the other options aren’t correct:

A: Dynamic routing not enabled — not required for GRE; recursion is about the next-hop path, not whether dynamic routing is enabled.

B: Tunnel cannot reach its destination — would indicate reachability, not specifically recursive routing.

D: Router cannot recursively identify its egress interface — essentially describes recursion, but the standard, precise explanation is that the tunnel destination is reachable via the tunnel itself (C).

Singapore, Singapore

AI Explanation - verified by User5972 on: June 09, 2026
Question 1:
Question 1 asks: Which methodology does ITDR use?

Correct answer: A — Behavior analysis

Why: ITDR relies on behavior analytics (often aligned with UEBA concepts) to identify suspicious or anomalous identity-related activity. It builds a baseline of normal user behavior (login times/locations, access patterns, privilege escalations) and flags deviations, enabling real-time alerts and automated responses to credential abuse or lateral movement.

Why not the others:

- B (Comparison of alerts to signatures): signature-based detection relies on known patterns and can miss novel identity threats. - C (Manual inspection of user activities): not scalable or timely for real-time threat detection. - D (Rule-based activity prioritization): static rules miss evolving or atypical behavior.
In short, ITDR’s strength is detecting anomalies in identity-related behavior rather than relying on signatures or manual/rule-based checks.
Floreffe, Belgium

AI Explanation - verified by User1449 on: June 09, 2026
Question 21:
Question 21 asks how to minimize unintended bias when predicting UK driver insurance prices.

Correct answer: B — Take a training sample that is representative of the population in the United Kingdom.

Why: Sampling bias occurs when the training data don’t reflect the real population. A UK-representative sample ensures the model learns from the true distribution of drivers (ages, locations, driving histories, etc.), helping reduce bias in predictions.

Why the other options are weaker:

- A) Removing information about protected characteristics before sampling can hide biases but doesn’t guarantee fairness; proxies for those characteristics may remain and the model may still be biased. - C) Using data from global insurers introduces distribution differences (non-UK patterns) and can worsen bias for UK customers. - D) A completely random sample isn’t guaranteed to reflect the UK population and may still be unrepresentative.
Key concept: aim for representative training data (stratified or carefully sampled) and monitor fairness across groups with appropriate metrics.
Singapore, Singapore

AI Explanation - verified by madhavi.chilla09 on: June 09, 2026
Question 68:
Question 68 is about reshaping data in Power Query Editor so you can show all measures over time and compute YoY for them.
Goal: Convert a wide table (one column per measure) into a long/tall table with columns like Date, Measure, Value.
Four actions in sequence:

1) In Power Query Editor, select the time/date column(s) you want to keep, then choose Unpivot Other Columns. This turns the measure columns into two: Attribute and Value.

2) Rename the Attribute column to Measure.

3) Change the data type of the Value column to a numeric type (e.g., Decimal Number).

4) Rename the Value column to a more descriptive name (e.g., MeasureValue or Amount).

Result: a dataset with Date, Measure, and MeasureValue fields, enabling visuals to include all measures over time and enabling YoY calculations in DAX.
Hyderabad, India

AI Explanation - verified by madhavi.chilla09 on: June 09, 2026
Question 64:
Question 64 tests how Row-Level Security (RLS) behaves when a user belongs to multiple roles.

Model: Tables Orders, Date, City with one-to-many relationships (Date ? Orders and City ? Orders).

Roles:

- Role1: City[State Province] = "Kentucky" - Role2: Date[Calendar Year] = 2020
Key concept: When a user is a member of more than one RLS role, the filters from those roles are applied together. In Power BI, RLS filters are effectively ANDed across roles for the same user, so the user must meet all role filters simultaneously.
Therefore, the user will see data where:

State Province is Kentucky AND

Calendar Year is 2020

Which corresponds to option D: “The user will only see data for which the State Province value is Kentucky and the Calendar Year is 2020.”
Note: The provided key showing A (Kentucky OR 2020) is incorrect for standard RLS behavior.
Hyderabad, India

AI Explanation - verified by User1449 on: June 09, 2026
Question 7:
The correct choice is: C: Provide documentation to help developers debug code.
Explanation:

The transparency principle focuses on making the AI system’s data, models, and decision-making processes visible and explainable. Documentation helps developers (and auditors) understand how the system works, why decisions are made, and how to reproduce or inspect the behavior.

A relates to accessibility for people with impairments (not transparency).

B relates to reliability and scalability (not transparency).

D relates to fairness/inclusiveness (not transparency).

So, providing documentation to clarify how the system operates supports transparency best among the given options.
Singapore, Singapore

AI Explanation - verified by sallysayo on: June 09, 2026
Question 332:
For Q332, the correct choice is B: Amazon Redshift.

Why: Redshift is AWS’s fully managed data warehouse service. It handles hardware provisioning, software patching, backups, and cluster maintenance, so you don’t have to manage infrastructure—ideal for petabyte-scale analytics.

Why the others aren’t suitable:

- Amazon DocumentDB is a managed document database (NoSQL), not a data warehouse. - Amazon Neptune is a graph database, not for wide analytics workloads. - Amazon ElastiCache is an in-memory cache, not a data warehouse.
So, Redshift meets the requirement of not needing manual hardware/software management while supporting large-scale analytics.
Singapore, Singapore

AI Explanation - verified by madhavi.chilla09 on: June 09, 2026
Question 62:
Short answer: D — Split the visuals onto multiple pages.
Why this is the best choice:

A single page with 25 visuals (15 AppSource + 10 default) can overload a report, causing slower load/interact times as each visual runs its queries. Splitting visuals across pages reduces concurrent queries and rendering work, improving perceived performance in a shared capacity.

Why the other options aren’t better:

Change DAX measures to iterator functions: Iterator functions (e.g., SUMX) often cost more CPU per row and can slow performance rather than speed it up.

Enable visual interactions: Enabling interactions can increase cross-filtering and the number of queries, potentially slowing things down; not a performance win.

Replace default visuals with AppSource visuals: AppSource visuals aren’t inherently faster; some may be heavier or less optimized. This isn’t a guaranteed performance gain.

Additional note:

In a 12M-row fact table on shared capacity, page-level optimization (fewer visuals per page) is a common, effective tactic. If needed, you can also consider aggregations or other model optimizations, but among the given options, paging the visuals is the recommended approach.

Hyderabad, India

AI Explanation - verified by User4103 on: June 09, 2026
Question 5:
No. A global meeting policy only controls meeting-related features (like video, recording, lobby behavior) for users and guests. It does not govern who can be invited as a guest or which domains guests can come from.
To meet the security policy, use:

External access in the Teams admin center to allow only specific domains (an allow-list) and block others.

Guest access settings to prevent guests from inviting other guests (disable guest invitations or otherwise restrict guest permissions).

Optionally, you can also use Azure AD (B2B) policies to further control guest invitations and domain usage.
Hyderabad, India

Jessica on: June 09, 2026
It's really good to have free practice test questions that boosts learning and exam preparation. Thanks a ton!
Jodhpur, India

AI Explanation - verified by User9877 on: June 09, 2026
Question 38:
Question 38 asks which Azure storage solution provides native support for POSIX-compliant access control lists (ACLs).

Correct answer: Azure Data Lake Storage (Gen2)

Why: Data Lake Storage Gen2 (the Data Lake offering built on Blob storage with a hierarchical namespace) supports POSIX-style ACLs, allowing fine-grained permissions at the file and directory level. The other options do not provide POSIX ACLs:

- Azure Table storage and Azure Queue storage are NoSQL/table/messaging stores with different access models. - Azure Files supports Windows-style ACLs, not POSIX ACLs.
Reference: Data Lake Storage access control documentation.
Jodhpur, India

AI Explanation - verified by User7732 on: June 09, 2026
Question 1:

Answer: True

Why: EXIN objectives treat teleworking as an extension of the organization’s information security. Therefore, you must assess and control not just digital risks but also physical security and the local teleworking environment. This includes preventing unauthorized access, eavesdropping, theft of devices, and other hazards that could compromise confidentiality and integrity. Typical measures include a secure workspace, privacy for screens, secure device provision and storage, and policies covering remote access and handling of data.

Harare, Zimbabwe

AI Explanation - verified by User9389 on: June 08, 2026
Question 136:
The correct answer is B: Evaluate and understand the cause of the conflict.
Why:

The situation involves a boundary dispute about which scope items belong to global vs local teams. The first step is to understand why this conflict is happening (root cause) before taking action.

How to proceed:

Talk with both local and global team representatives to gather facts.

Review the project’s scope management plan, especially the boundary definitions and the RACI (roles and responsibilities).

Check backlog ownership and any recent change requests that might have shifted ownership.

Facilitate a brief discussion to re-clarify boundaries and agree on who handles which items; use change control if scope ownership needs adjustment.

What the other options miss:

A (Assess capacity) doesn’t address why the delegation requests are occurring.

C (Escalate to sponsor) is premature if the root cause can be resolved at the team level.

D (Reject workload to global team) ignores the underlying cause and friction.

Bottom line: Understanding the root cause aligns teams with defined scope ownership and prevents repeating the conflict. If you’d like, I can outline a quick root-cause checklist you can use in the next meeting.
Petaling Jaya, Malaysia

AI Explanation - verified by User3790 on: June 08, 2026
if an asset quarantined a file how is not considered clean
Short answer: quarantining a file does not make the host clean.
Why not:

Quarantine is a containment action, not a full remediation. It stops the file from running, but it doesn’t prove the threat is gone.

There can be other indicators on the host (suspicious processes, registry changes, unusual network activity) or other infected files.

The quarantined file could be a false positive, so you still need to verify with hash reviews and further scanning.

The host may have persistence mechanisms or be part of a larger compromise (lateral movement, C2, etc.).

What to do in the drill:

Look for additional IOC on that host (outbound traffic, suspicious processes, new user accounts).

Check if other hosts show related activity.

Validate the quarantine: hash, source, and whether it’s truly malicious.

Until confirmed clean, label the host as not clean (infected or at least suspicious) and pursue full remediation.

Marine Corps Base Camp Lejeune, United States

AI Explanation - verified by User5093 on: June 08, 2026
Question 38:
Question 38 explanation:

Correct answer: A — Cost of application software licenses

Why:

In the AWS Shared Responsibility Model, AWS handles the physical infrastructure: hardware, power, and data center physical security.

The customer is responsible for what runs on top of AWS, including software licensing, configurations, data, and access control.

Therefore, after migrating, the direct cost the company bears from the options is the cost of their application software licenses. The hardware infrastructure on AWS, power for AWS servers, and physical security for the AWS data center are AWS's responsibility.

Madrid, Spain

AI Explanation - verified by User8539 on: June 08, 2026
Question 18:
Question 18 asks how to develop a streaming Speech-to-Text solution using the Speech SDK with MP3 input. In Python, you don’t feed MP3 bytes directly to the SDK. The SDK expects PCM audio (e.g., 16 kHz, mono, 16-bit). So you must decode MP3 to PCM and then push that PCM data into a streaming input.
Key approach in Python:

Decode MP3 chunks to PCM (16 kHz, mono, 16-bit).

Use a PushAudioInputStream and an AudioConfig that reads from that stream.

Feed the PCM chunks into the stream as they arrive, then run a SpeechRecognizer (continuous or single-shot).

Example (conceptual):

Install PyDub and FFmpeg for decoding: use PyDub to convert MP3 to PCM chunks.

Python code outline:

import azure.cognitiveservices.speech as speechsdk from azure.cognitiveservices.speech import audio from pydub import AudioSegment import io speech_config = speechsdk.SpeechConfig(subscription="YOUR_KEY", region="YOUR_REGION") stream = audio.PushAudioInputStream() audio_config = audio.AudioConfig(stream=stream) recognizer = speechsdk.SpeechRecognizer(speech_config=speech_config, audio_config=audio_config) def feed_mp3_chunks(mp3_chunks): for mp3 in mp3_chunks: seg = AudioSegment.from_mp3(io.BytesIO(mp3)) pcm = seg.set_frame_rate(16000).set_channels(1).set_sample_width(2) stream.write(pcm.raw_data) stream.close() recognizer.start_continuous_recognition() feed_mp3_chunks(your_mp3_stream) recognizer.stop_continuous_recognition()

Notes:

Decoding
Cary, United States

khushi on: June 08, 2026
GOOD explanation
Pune, India

AI Explanation - verified by User5184 on: June 08, 2026
Question 33:

Answer: No (B)

Why: The goal is to reduce the impact on users after migrating resources to Azure and decommissioning the on-prem data center. Requiring Azure MFA adds an extra authentication step for users, which increases login friction and can slow them down. That does not reduce user disruption; it can actually worsen it.

How to approach properly instead:

- Use Azure AD Connect with Password Hash Synchronization and enable Azure AD Seamless SSO to provide a smooth sign-on experience. - Apply Conditional Access to require MFA only under certain conditions (e.g., from untrusted networks or high-risk sign-ins), reducing unnecessary friction. - Plan phased migration and user communication so changes are predictable, with training and support.

In short: MFA is important for security, but alone it doesn’t meet the goal of reducing user impact during/after migration. A combination of SSO and selective MFA (via Conditional Access) achieves lower friction while maintaining security. If you want, I can walk through how to configure these concepts.

Pune, India

AI Explanation - verified by User3934 on: June 08, 2026
Question 82:
Question 82 explanation:

Correct answer: D. Average response time

Why:

Average response time measures end-to-end latency and directly reflects the user-perceived performance of a web application.

Other metrics serve different purposes but aren’t as direct a measure of performance:

- Server thread count indicates workload capacity/resources, not actual response speed. - Server uptime measures availability, not speed. - HTTP server error rate indicates reliability; it doesn’t quantify how fast responses are.
Note: In practice, it’s best to monitor multiple metrics (latency, error rate, throughput, resource utilization) for a full performance picture, but if you must pick one, average response time is the best single indicator of performance.
Siteki, Eswatini

AI Explanation - verified by User3934 on: June 08, 2026
Question 81:
Question 81 asks how to best gain insight into potential single-person dependencies (SOD issues).

The correct answer is C. Mapping IT processes to roles.

Why: It directly shows who is responsible for each step in critical processes, highlights overlap between duties, and reveals where one person could control multiple key steps. This is the most effective way to identify SOD gaps and design proper controls.

Why not the others:

- Reviewing vacation patterns: can show coverage gaps but not the actual duty assignments or overlaps. - Interviewing senior IT management: provides opinions, not concrete evidence of role assignments. - Reviewing user activity logs: shows what individuals did, but after the fact and may not reveal where duties are improperly combined.
Tip: Use process-to-role mapping to assess separation of duties, and pair with access reviews to strengthen control.
Siteki, Eswatini

AI Explanation - verified by User9431 on: June 08, 2026
Question 43:
I can’t see the image, but here’s the reasoning for Question 43.

Purpose: Merge Customer and Contacts on the Customer Name field.

Why fuzzy matching: The data isn’t sanitized, so there may be typos, extra spaces, or case differences. Fuzzy matching helps map similar names instead of missing matches.

Join type: Use a Left Outer join if you want to keep all rows from the Customer table and attach matching contact info from Contacts. If there are multiple contacts per customer, you’ll get multiple merged rows (one per match).

What to do in Power Query (Power BI Desktop):

Open Merge Queries with Customer as the primary table and Contacts as the secondary table.

Join on Customer Name.

Enable fuzzy matching (Use fuzzy matching).

Set the Join Kind to Left Outer.

Optionally adjust the similarity threshold and case/diacritic options to balance matches.

Recommendation: The best answer isn’t just “Enable fuzzy matching” but “Enable fuzzy matching and set Join Kind to Left Outer.” This preserves all customers while matching as many contacts as possible. If you want to avoid duplicate member rows, you may need to post-process the results.
Singapore, Singapore

AI Explanation - verified by User3058 on: June 08, 2026
Question 43:
Correct answer: Enable fuzzy matching.
Reasoning:

The Contacts data is not sanitized, so customer names may have typos, extra spaces, or slight variations. Exact matches would miss many valid relationships.

Enabling fuzzy matching lets Power Query align near-matches based on similarity, making the merge more robust.

How to implement:

In Power Query Editor, use Merge Queries (Customer as the left table, Contacts as the right table).

Join on Customer_Name (Customer) and Customer Name (Contacts).

Enable Use fuzzy matching (and adjust the similarity threshold if needed).

(Optional) Choose Left Outer as the join kind to keep all Customer rows, expanding to include matching Contacts data as desired.

Tip: After merging, expand the related columns you need (e.g., Contact Name, Contact Email) to complete the merged dataset.
Hyderabad, India

AI Explanation - verified by User3058 on: June 08, 2026
Question 41:

Correct answer: D. Transform the column to contain only the year.

Reasoning:

The goal is to derive just the year from a Date column with minimal effort. Splitting by delimiters or a fixed number of characters is a text-manipulation approach and brittle for dates; it’s not the right tool for date semantics.

The proper approach is to extract the year from the date using a date function or a built-in date transformation.

How to implement in Power Query Editor:

Open Power Query Editor.

Select the Date column.

Use: Transform > Date > Year (or Add Column > Date > Year) to produce a year value.

If you need only the year column, delete the original Date column after you’ve created the year column, leaving just the year values.

Concept: Use Date.Year([Date]) (via the UI as Year) to convert a date to its year component, which is the most robust and least labor-intensive method.
Hyderabad, India

AI Explanation - verified by User9732 on: June 08, 2026
Question 68:
Question 68 asks what to do when a phase takes much longer than planned and stakeholders worry about delays.

Correct answer: D. Organize a root cause analysis (RCA) workshop.

Why: Before applying fixes or increases in contingency, you should diagnose the actual causes of the delay. An RCA workshop brings the team together to identify root causes (not just symptoms) and agree on corrective actions. This supports better, targeted mitigation and helps reset expectations with stakeholders.

Why the other options are less appropriate initially:

- A. Request additional contingency from the sponsor – reactive and misaligned if you haven’t identified the causes or approved specific corrective actions. - B. Add more float to the overall project schedule – may mask the problem and doesn’t address root causes; could lead to more risk later. - C. Expedite the next phase to reduce slippage – could increase risk, cost, and quality issues without solving the underlying delay.

What to do after RCA:

- Develop and implement corrective actions. - Update the project plan and possibly the schedule baseline. - Communicate findings and revised plan to stakeholders.
In PMI terms, you’re performing root-cause analysis to inform corrective action and schedule management.
Riga, Latvia

AI Explanation - verified by User3934 on: June 08, 2026
Question 48:

Answer: C — Risk-based auditing

Why: The goal is to allocate audit resources to areas with the greatest risk and potential impact, maximizing effectiveness and efficiency. Risk-based auditing prioritizes audits of high-risk processes and controls.

Quick contrasts:

- Agile auditing: faster, iterative approach, but not the primary method for prioritizing resource use across the program. - Continuous auditing: automated, ongoing monitoring; helps efficiency but isn’t the overarching prioritization framework. - Outsourced auditing: shifts work outside the organization; doesn’t by itself optimize internal resource allocation.
Siteki, Eswatini

AI Explanation - verified by User9732 on: June 08, 2026
Question 64:
Question 64 asks which three actions help ensure proper stakeholder involvement when new stakeholders express interest. Correct choices: A, B, E.
Why these are correct:

A. Prioritize stakeholders based on the project phase and need

Focuses involvement where and when it’s most needed, preventing overload and ensuring key stakeholders are engaged at the right time (aligns with Plan Stakeholder Engagement).

B. Perform a stakeholder assessment to align with the project objectives

Ensures engagement supports objectives and identifies who should be involved and how deeply.

E. Develop a stakeholder impact/influence matrix to determine the level of engagement

Uses a structured view (influence/impact) to tailor engagement strategies; a common PM practice for stakeholder analysis.
Why others aren’t correct:

C. Classify and rank stakeholders based on their positions in the organization

Position alone isn’t a reliable driver of engagement level; influence and impact matter more.

D. Include all stakeholders in the stakeholder engagement plan and provide the same level of communication

Engagement must be tailored; not every stakeholder requires the same communication or level of involvement.
Riga, Latvia

AI Explanation - verified by User3058 on: June 08, 2026
Question 22:
Question 22 is about building a Country dimension with unique country values.
Correct answers: D and E
Why:

D (Delete the City column): The City column isn’t part of the Country dimension and would introduce unnecessary granularity. Removing it helps focus the table on country values.

E (Remove duplicates from the Country column): After removing City, you need one row per country. Removing duplicates from the Country column yields a distinct list of countries suitable for a dimension.

What the other options do:

A: Delete the Country column would eliminate the key you need for the dimension.

B: Remove duplicates from the table is too broad and may remove needed data beyond just creating a country list.

C: Remove duplicates from the City column would not produce a unique country list (countries could still repeat).

Implementation tip: In Power Query Editor, first delete the City column, then use Remove Duplicates on the Country column (or group by Country and keep the Country key) to obtain a distinct list.
Hyderabad, India

AI Explanation - verified by User6002 on: June 08, 2026
Question 1:
I can’t view the image that shows the table, but the answer key for Q1 is B: all five groups (Group1, Group2, Group3, Group4, and Group5).
Why B is correct (conceptual):

This question tests group-based licensing in Azure AD. You can assign a license directly to a group (security group or Microsoft 365 group), and all current and future members of that group receive the license.

If the table indicates that Groups 1–5 are configured as license-enabled groups, you can assign the Office 365 Enterprise E5 license to each of those groups. The license then applies to every member in those groups.

The presence of a device or individual users doesn’t matter for group-based licensing—the license is granted to the group, and members inherit it.

Notes:

Ensure the groups you license are of a type that supports licensing (security or Microsoft 365 groups) and that the SKU includes the E5 features you expect.

To assign, use the Licenses area in the Azure AD or Microsoft 365 admin center and select the groups to license.

Delhi, India

AI Explanation - verified by User7024 on: June 08, 2026
Question 6:
Question 6 asks you to pick two true statements about routing vs forwarding tables.

Correct answers: A and D

Why:

A: The routing table is used by the RE (Routing Engine) to select the best route. The RE considers all learned routes and chooses the best one.

D: The routing table stores all routes and prefixes learned from all routing protocols. It aggregates routes from every protocol.

Why the other options are false:

B is incorrect because the forwarding table does not store all routes and prefixes from all protocols; it contains the active routes that have been chosen for forwarding.

C is incorrect because the forwarding table is used by the PFE (Packet Forwarding Engine) to forward packets, not by the RE to select the best route.

In short, the routing table is for route selection and protocol-wide storage, while the forwarding table holds the active routes used for actual forwarding.
Tashkent, Uzbekistan

AI Explanation - verified by User2969 on: June 08, 2026
Question 1:
For Question 1, the destination is 10.10.13.10/32. A /32 is a single host, so the route type used to reach that host is a host route (C).
Why:

A host route is a route to a single IP address (destination 10.10.13.10/32).

A network route would be something like 10.10.13.0/24, which covers a subnet—not just one host.

The default route (0.0.0.0/0) is used for destinations not in the routing table.

A floating static route is a static route with a higher administrative distance used as a backup, not the primary route to a specific host.

Note: The page shows Answer: B (network route), which is incorrect for a /32 host destination.
Sur, Oman

AI Explanation - verified by User7945 on: June 07, 2026
Question 8:
No. The plan to use several Azure AD directories (tenants) does not meet the goal of segmenting by division with minimal admin effort.
Why:

Each division would live in a separate Azure AD tenant, which creates separate identities, policies, and administration. Cross-tenant management is more complex and costly than needed.

What to do instead (in a single tenant):

Use a single Azure AD tenant.

Structure divisions with subscriptions and/or Management Groups to isolate resources by division.

Apply RBAC (role-based access control) at the division scope (subscription or management group) so admins only manage their division’s resources.

Use Azure Policy and governance to enforce standards across divisions.

If cross-tenant access is truly required, consider Azure Lighthouse for delegated administration, but be aware it adds complexity.

Bottom line: The exam answer is No because a single-tenant approach with RBAC/management groups provides segmentation with far less administrative overhead than multiple tenants.
Hyderabad, India

AI Explanation - verified by User7945 on: June 07, 2026
Question 7:
Question 7 asks which Azure web tier to host 10 web apps with specific constraints. The stated answer is A: Standard.
Why Standard fits (brief reasoning):

Excludes Free and Shared: both use shared compute and do not meet “dedicated compute” and likely not all requirements (custom domains, load balancing, storage).

Basic can provide dedicated compute and custom domains, but has limited scale/storage compared to Standard (e.g., fewer instances and smaller storage quotas). With 10 apps each needing 10 GB, Basic may not meet storage/scale needs.

Standard offers more robust compute (more instances), built-in load balancing, and higher storage quotas, which aligns with hosting multiple apps with custom domains and the required storage, at a lower cost than Premium.

Important caveat:

If you truly need strict per-app isolation (one dedicated instance per app), you’d typically use separate App Service Plans per app (potentially Basic or Standard), which increases cost. The exam question often treats “dedicated compute” at the plan level rather than per app, so Standard is considered the minimal tier meeting all listed requirements.

Hyderabad, India

AI Explanation - verified by User3971 on: June 07, 2026
Question 16:
Answer: C — Import mode selected and schedule a daily refresh.
Explanation:

Why not A or B (DirectQuery): DirectQuery keeps hitting the on-prem SQL server for each user query, which keeps online processing and render times high. The Enhanced Dataflows Compute Engine helps, but it doesn’t eliminate the live query cost.

Why not D (Import with hourly refresh): Hourly refresh adds more processing workload and doesn’t improve end-user render times during reports. You want fewer online operations, not more frequent refreshes.

Why C fits: Import mode loads data into the Power BI service (reducing online queries during visuals), and a daily refresh keeps data updated while meeting the “current year up to previous day” window. The Enhanced Dataflows Compute Engine further optimizes dataflow processing for these loads.

Note: For on-prem data sources, a gateway is typically required to refresh, but the option that matches the scenario best is Import mode with daily refresh.
Shah Alam, Malaysia

cham on: June 07, 2026
I appreciate you in Korea
Osan, South Korea

AI Explanation - verified by mitu.ashish on: June 07, 2026
Question 5:
Here’s how to approach Question 5.

Correct options: B, C, E.

Why:

Enable column profile (B) turns on statistics collection for each column (including min and max).

Show column profile in details pane (C) tells the UI to display those statistics in the column’s profile area.

Enable details pane (E) makes the details pane visible so you can actually see the column profile information.

What the other options do (not required for min/max):

Show column value distribution: shows value distribution (histogram), not specifically min/max.

Show column quality details: shows data quality metrics, not min/max.

Note: The exam text shows only B and E as the answer, but to view min/max per column, you typically also need to show the profile in the details pane (i.e., include C). If you don’t see the profile, ensure the details pane is enabled and that the column profile is being displayed there.
Sydney, Australia

AI Explanation - verified by User5339 on: June 07, 2026
Question 58:

Answer: NS records

Why: NS records specify the authoritative name servers for a domain. To change where the outside DNS records are hosted, you delegate the domain to the new DNS provider by updating the NS records at the registrar to point to the new provider’s name servers. This tells the internet which servers are authoritative for your domain.

Why the other options are incorrect:

- SOA (Start of Authority) contains zone metadata (primary name server, admin email, serial, timers) but does not delegate hosting. - PTR is for reverse DNS lookups (IP to domain), not for delegating where a domain’s DNS is hosted. - CNAME creates an alias for a domain name; it does not control where DNS for the domain is hosted.

Quick steps to perform:

1. Obtain the new provider’s NS records (e.g., ns1.newhost.com, ns2.newhost.com). 2. At the domain registrar, update the domain’s NS records to the new values. 3. Allow for DNS propagation (can take up to 24–48 hours). 4. Ensure the new DNS zone has all necessary records (A/AAAA, MX, etc.) and verify using DNS lookup tools (e.g., dig or nslookup).
Wesley Chapel, United States

AI Explanation - verified by User8187 on: June 07, 2026
Question 31:
Question 31 asks whether including a Network Security Group (NSG) in your Azure design to control the connection types between web servers and database servers meets the goal.

Correct answer: A (Yes)

Why:

NSGs are the primary tool to filter network traffic in Azure. You can apply them at the subnet level or to individual network interfaces (NICs).

To control traffic between web and database tiers, put the web servers in one subnet and the database servers in another, then create NSG rules that:

- Inbound: allow traffic from the Web subnet to the DB subnet on the database port(s) (for example, TCP 1433 for SQL Server). - Optionally restrict or deny other traffic between the two subnets. - Ensure outbound rules align with the desired traffic flow.

This setup prevents undesired access while permitting only the approved connection types between tiers.

Practical steps:

Create NSG.

Add inbound rule: source = WebSubnet, destination = DBSubnet, port = DB port, action = Allow.

Add any necessary outbound rules and place the NSG on the DB subnet or on DB NICs.

So NSGs effectively meet the requirement of controlling connections between web and database servers.
Pune, India

AI Explanation - verified by User6833 on: June 07, 2026
Question 3:
I can’t view the hotspot image in Question 3, but I can explain how to approach it and what the scoring is looking for.
How to approach a network infection hotspot:

Collect and review all logs from hosts and the firewall (timestamps, destinations, ports, process names, user logins).

Sort by time to find the earliest suspicious event. The origin host is typically the first system that shows a foothold or initiates activity toward others.

Look for indicators of compromise across hosts that share the same IoCs (malware hash, C2 domains/IPs, beacon patterns, or suspicious executables).

Determine each remaining host’s status:

- Infected: shows matching IoCs, lateral movement activity, or persistence artifacts. - Clean: no matching IoCs and no anomalous activity after isolating the suspected origin.

Document findings and containment steps (isolate infected hosts, reset credentials, block C2 IPs).

If you can describe or paste key log entries (timestamps, src/dst IPs, ports, event types, or any malware indicators), I can help pinpoint the origin and classify hosts more precisely.
Thabazimbi, South Africa

AI Explanation - verified by User8281 on: June 07, 2026
Question 3:
Question 3 asks whether the given year-end configuration meets these goals:

Q1 adjustments can post to the previous year’s Period 13.

The year-end can be run again, but only the most recent closing entry remains.

All P&L dimensions carry into retained earnings.

All past and future periods are On Hold.

What the solution sets:

Delete close of year transactions: No

Create closing transactions during transfer: No

Fiscal year status permanently closed: No

Year-end close template: defined

Retained earnings main account: designated

Opening transactions option for financial dimensions: No

Transfer profit and loss dimensions: Close All

All prior and future ledger periods: On Hold

Why this does not meet the goal:

The key requirement to allow re-running the year-end with only the latest closing entry means you should be able to delete older closing entries. Setting "Delete close of year transactions" to Yes is typically needed; with No, older closing entries would remain.

Similarly, “Create closing transactions during transfer” should usually be Yes so a new closing can be created during the transfer step.

Opening transactions should likely be Yes to ensure P&L dimensions flow into retained earnings; No may prevent carrying those dimensions.

The rest (retained earnings main account, On Hold for prior/future, and transferring P&L dims) align with the goals.

Recommended: set Delete close of year transactions to Yes, Create closing transactions during transfer to Yes, Opening transactions to Yes, keep Fi
Cebu City, Philippines

Pradeep on: June 07, 2026
Yes, I am experienced Azure admin but this dump helps me to assess myself and able to regain confidence.
Dubai, United Arab Emirates

Kapil on: June 06, 2026
Good to get idea of question asked
Udaipur, India

AI Explanation - verified by User6119 on: June 06, 2026
Question 8:

Answer: No.

Why: The health probe for an Azure internal load balancer must match the protocol the service uses. SQL Server listens over TCP (default port 1433) and does not speak HTTP. An HTTP health probe on port 1433 will fail, causing the load balancer to mark the backend as unhealthy. Use a TCP health probe on the listener port (typically port 1433, or the port you configured for the AG listener) so the LB can correctly determine health. Also ensure the port is allowed through firewalls on the VMs.

Hyderabad, India

AI Explanation - verified by giri2685 on: June 06, 2026
Question 308:
Correct answers: C and D

Why: To allow a role to SELECT from all current tables in a schema, you grant:

- GRANT SELECT ON ALL TABLES IN SCHEMA DB1.SCHEMA TO ROLE MYROLE;

To cover future tables created in that schema, you grant:

- GRANT SELECT ON FUTURE TABLES IN SCHEMA DB1.SCHEMA TO ROLE MYROLE;

Why the others are incorrect:

- A/B try to grant USAGE on tables (not a valid privilege for tables—USAGE is used at schema/warehouse level, not on table objects). - E/F target the entire database, not just the schema, which isn’t what the question asks.
Bengaluru, India

AI Explanation - verified by User2042 on: June 06, 2026
what is the process of elimination

The process of elimination is a test-taking strategy to improve your odds by discarding clearly wrong options.

How to use it:

Read the stem carefully to know exactly what’s being asked.

Rule out options that are obviously incorrect based on your knowledge or the question’s focus.

Look for distractors: absolute terms (always/never), or statements that don’t align with the goal.

Compare the remaining options and choose the one that best fits the objective or policy in question.

If you must guess, pick among the remaining choices that have the strongest justification.

Applied to Question 1 (first step in developing an information security plan):

A: Vulnerabilities assessment—eliminate because it’s a technical activity that comes after understanding strategy.

C: Business impact analysis—eliminate because it’s about continuity planning, not the first step in strategy development.

D: Security awareness assessment—eliminate because it supports training, not the initial strategy alignment.

B: Analyze the current business strategy—keep as the best choice since governance must be driven by business direction.

Tip: Use this approach to quickly narrow options on ISACA-style questions by prioritizing alignment with business goals and governance, not just technical details.
Amsterdam, Netherlands

AI Tutor 👋 I’m here to help!

Cisco 300-206 Exam Questions Implementing Cisco Edge Network Security Solutions (RETIRED) (Page 16 )

QUESTION: 57 DRAG DROP

QUESTION: 58

QUESTION: 59

QUESTION: 60

300-206 Exam Discussions & Posts (Share your experience with others)

Cisco 300-206 Exam Questions
Implementing Cisco Edge Network Security Solutions (RETIRED) (Page 16 )