A Cisco ASA is configured for TLS proxy. When should the security appliance force remote IP phones connecting to the phone proxy through the internet to be in secured mode?

When the Cisco Unified Communications Manager cluster is in non-secure mode
When the Cisco Unified Communications Manager cluster is in secure mode only
When the Cisco Unified Communications Manager is not part of a cluster
When the Cisco ASA is configured for IPSec VPN

Answer(s): A

Show Answer Next Question

QUESTION: 79

Which two features are supported when configuring clustering of multiple Cisco ASA appliances? (Choose two.)

NAT
dynamic routing
SSL remote access VPN
IPSec remote access VPN

Answer(s): A,B

Show Answer Next Question

QUESTION: 80

Which two device types can Cisco Prime Security Manager manage in Multiple Device mode?
(Choose two.)

Cisco ESA
Cisco ASA
Cisco WSA
Cisco ASA CX

Answer(s): B,D

Show Answer Next Question

Download PDF Next Page

Viewing page 21 of 110
Viewing questions 81 - 84 out of 438 questions

Post your Comments and Discuss Cisco 300-206 exam prep with other Community members:

Comments:

Name:

300-206 Exam Discussions & Posts (Share your experience with others)

AI Explanation - verified by User4855 on: May 26, 2026
Question 18:
Question 18 asks you to create a BusyBox pod and run a sleep command inside it.
Key points about the solution

Command: kubectl run busybox --image=busybox --restart=Never -- /bin/sh -c "sleep 3600"

kubectl run with BusyBox creates a Pod by default.

--restart=Never ensures you get a Pod (not a Deployment or ReplicaSet).

-- separates kubectl options from the container command.

The container runs /bin/sh -c "sleep 3600", which makes the container sleep for 3600 seconds.

Pod lifecycle outcome

The container sleeps for 1 hour, then exits.

With --restart=Never, Kubernetes will not restart the container, so the Pod transitions to a Completed/Succeeded state after the sleep finishes.

Verification tips

Check status: kubectl get po busybox

Details: kubectl describe po busybox

Note: If you want the Pod to stay running, you’d use a command that doesn’t exit (e.g., a loop).
Correct answer: A
Anonymous

AI Explanation - verified by ohfrrl on: May 26, 2026
Question 388:
Question 388 asks how to reduce the attack surface in data centers.

Correct answer: D) Upgrade end-of-support operating systems.

Why:

End-of-support OSes no longer receive security patches or updates, leaving known vulnerabilities unaddressed. Upgrading to a supported OS reduces these weaknesses and closes exploitable attack vectors, thereby lowering the attack surface.

Why the other options are less effective for reducing attack surface:

Implement a honeynet: Helps with detection and research, not primarily about reducing the number of vulnerabilities.

Define Group Policy on the servers: Can enforce security settings, but it doesn’t fix underlying software vulnerabilities or missing patches.

Configure the servers for high availability: Improves uptime and resilience, not the number of vulnerabilities.

In short, keeping systems within vendor support and receiving patches is the most direct way to minimize attack surface.
Anonymous

AI Explanation - verified by User4210 on: May 26, 2026
Question 45:
Question 45 asks how to ensure a parent case can’t be closed until all its child cases are closed.
Why D (Apex trigger to check child case status before closing it) is the right approach:

Cross-record logic: You need to check related child records when closing the parent. A trigger on the parent can query its child cases and block the update if any are not closed.

Bulk-safe and reliable: Apex can handle multiple records at once and enforce the rule consistently, even in bulk operations.

Why the others are less suitable:

Validation rule on the child: This would only prevent closing a child, not enforce the rule that the parent can’t close while children are open.

Workflow on the parent to check child status: Workflows can’t reliably enforce this cross-record gating in a simple, bulk-safe way.

Rollup summary on the child: Rollups require a master-detail relationship; Case Parent is a lookup, so standard rollups don’t apply without additional tools.

So, the correct approach is to use an Apex trigger (D) to enforce the rule.
Anonymous

AI Explanation - verified by User4210 on: May 26, 2026
Question 44:
Question 44 asks how to automatically change the Account status from Prospect to Customer when an Opportunity is won, choosing two valid options.
Two valid approaches:

B. Use Apex trigger to update account status field: A trigger on Opportunity (after update) checks if StageName is 'Closed Won' and then updates the related Account.Status to 'Customer'. Pros: robust, bulk-safe, works for all updates. Cons: requires code and testing.

C. Create Opportunity workflow rule to update account status field: A workflow rule on Opportunity fires when the record becomes Closed Won and uses an Update Records action to update the related Account.Status to 'Customer'. Pros: no code, admin-friendly. Cons: limited to workflow capabilities (older automation; Flow/Process Builder offer more flexibility).

Why the others aren’t appropriate:

A. Visualforce: Not an automatic automation solution; Visualforce is UI code and won’t run by itself on data changes.

D. Create account workflow rule: An Account workflow won’t fire from an Opportunity change unless you have cross-object automation elsewhere; standard Account workflow rules aren’t triggered by Opportunity updates.

Anonymous

AI Explanation - verified by User4210 on: May 26, 2026
Question 40:
Question 40 asks about replacing a manual contract lookup with a Salesforce data model.
Key concepts:

Entitlements and Service Contracts model post-sales service terms.

Service Contract Lines (line items) let you specify coverage for individual products or services under one contract.

Option analysis:

A: Setup an entitlement with Service Contract — creates the contract, but no line items. Good for a single-term contract but doesn’t scale to multiple products/services.

B/C: Not addressing data model needs; they don’t automate the contract lookup.

D: Setup Entitlements with Service Contract and Line Items — most robust. One contract can have multiple line items describing coverage for each product/service, enabling easier, consistent access to a user’s contract without manual lookups.

Recommended: D. It covers multi-product coverage and aligns with best practices for service coverage. If you only need a single contract with no line items, A could be enough, but D is the safer, more scalable choice.
Anonymous

AI Explanation - verified by User4210 on: May 26, 2026
Question 37:
Here’s what you need to merge accounts with related opportunities and cases:

To merge, you must delete the duplicate (non-master) accounts and you may also need to update the master account during the merge. That requires both:

- Delete on Account - Edit on Account

You also need to reassign related records to the master account, so you must be able to update those child records:

- Edit on Opportunity - Edit on Cases
Putting it together, the correct permission set is: Edit and Delete on Account, Edit on Opportunity and Cases.
Answer: D
Why: You need to delete duplicates and edit the master account during the merge, plus edit permissions on related opportunities and cases to reparent them to the master.
Anonymous

AI Explanation - verified by User8593 on: May 26, 2026
Question 26:
Question 26: The correct answer is No.

Why: The goal is to ensure administrative credentials are encrypted during deployment. Azure Information Protection (AIP) is not a secrets-management solution. AIP is used to classify and protect documents and emails, not to securely store or deliver deployment secrets at runtime.

What to use instead: Use Azure Key Vault to securely store credentials and access them during automation. Combine with a service principal or Managed Identity for your deployment tooling to retrieve secrets at runtime without exposing them in code or logs. This provides proper secrets management and encryption in transit at the point of use.

Abuja, Nigeria

AI Explanation - verified by User8593 on: May 26, 2026
Question 22:

Answer: No

Why:

- Microsoft Managed Desktop is a managed endpoint service for Windows devices, not a tool for provisioning or lifecycle-managing virtual machines. - It does not support Linux VMs, and it isn’t designed to create and delete large numbers of VMs on a weekly basis. - To reduce administrative effort for weekly VM deployment/removal (with a mix of Windows and Linux), use options like: - Azure DevTest Labs (templates, schedules, cost controls for rapid VM provisioning/deprovisioning) - or Azure Automation with runbooks, or ARM templates with a deployment pipeline for lifecycle management.
Abuja, Nigeria

fadoua on: May 26, 2026
explanations
Inlet Beach, United States

AI Explanation - verified by User8593 on: May 26, 2026
Question 19:

Answer: B (No)

Why:

- The target is 99.99% availability with as few VMs and AZs as possible. - Azure SLA basics: - 1 VM: ~99.9% uptime. - 2+ VMs in an Availability Set (single data center): ~99.95%. - 2+ VMs across two or more Availability Zones: ~99.99%. - The proposed design uses two VMs in one Availability Zone. This yields ~99.95% SLA (not 99.99%), so it does not meet the goal. - To achieve 99.99% with minimal resources, you should deploy at least two VMs across two Availability Zones (zone-redundant) and place a load balancer in front of them to handle traffic failover.
Abuja, Nigeria

AI Explanation - verified by User8593 on: May 26, 2026
Question 16:
Question 16 asks whether recommending the Azure API Management service (APIM) is a valid strategy to automatically create a large number of identical Azure resources for multiple business units.

Correct answer: No (B).

Why:

APIM is for API management, not for provisioning or automating the creation of resources.

To automatically deploy identical resources for each business unit, use infrastructure-as-code (IaC) tools such as:

- ARM templates or Bicep - Terraform

Pair IaC with automation (CI/CD pipelines in Azure DevOps or GitHub Actions) and optionally use Azure Blueprints to deploy repeatable, compliant resource sets across units.

Key takeaways:

APIM = API management, not provisioning.

For automatic resource creation, prefer IaC and automation tooling.

Abuja, Nigeria

AI Explanation - verified by User8593 on: May 26, 2026
Question 15:
Question 15 asks if using Azure Machine Learning Studio satisfies the goal of deploying an AI solution with the ability to build, test, and deploy predictive analytics.

Correct answer: Yes (A).

Why:

The objective is to build, test, and deploy predictive analytics in Azure.

Azure Machine Learning Studio provides a visual, end-to-end environment for:

- Building experiments and pipelines (data prep, feature engineering, model training). - Running and evaluating models to assess predictive performance. - Deploying models as web services for real-time or batch predictions.

This covers the full lifecycle required for a predictive analytics solution.

Notes:

In modern practice, you might use the newer Azure Machine Learning workspace (not just Studio), but the Studio option in the question clearly maps to the required capabilities (build/test/deploy) for predictive analytics.

Abuja, Nigeria

AI Explanation - verified by User1193 on: May 26, 2026
Question 22:
The correct feature is VNF Service Chaining (option D).
Why:

The question describes branch routers examining traffic and steering it to the appropriate network function, i.e., chaining virtual network functions (VNFs) to form a service path. That’s exactly what “VNF Service Chaining” provides in Cisco SD-WAN.

Regionalized service chaining means applying these chains in specific regions or sites to optimize cost and user experience by selecting the nearest or most cost-effective VNF path.

Incorrect options:

Cloud onRamp for Colocation: On-ramps to VNFs hosted in a colocated data center; focuses on cloud/provider connectivity rather than chaining VNFs across the fabric.

Cloud onRamp for IaaS: On-ramp to IaaS clouds; not about steering traffic through a network function chain.

Cloud Services Platform: Platform for integrating cloud services; not specifically the traffic-steering VNF chaining feature.

Note: The exam page shows A, but the concept that matches the described regionalized service chaining is D — VNF Service Chaining.
Hamburg, Germany

AI Explanation - verified by User2551 on: May 26, 2026
Question 50:
Question 50 asks how to use a private/custom model with Amazon Bedrock. Here’s how to think about the options:

A. Purchase Provisioned Throughput for the custom model.

- Not a typical requirement for Bedrock integration. Bedrock is a managed inference service; you don’t usually buy throughput separately for a private model.

B. Deploy the custom model in an Amazon SageMaker endpoint for real-time inference.

- Could be part of a private model workflow, but Bedrock itself handles how your private model is invoked. This isn’t necessarily a mandatory step to use the model through Bedrock.

C. Register the model with the Amazon SageMaker Model Registry.

- Helpful for model versioning and governance, but not strictly required to "use" the model via Bedrock.

D. Grant access to the custom model in Amazon Bedrock.

- This is the most relevant mandatory step: Bedrock must be authorized to invoke your private model.
Bottom line:

The most correct single action is D (grant access in Bedrock). The provided answer key showing A is likely incorrect. C could be useful for governance, and B could be part of some setups, but they aren’t strictly required to run the custom model through Bedrock.

Bengaluru, India

AI Explanation - verified by User2551 on: May 26, 2026
Question 20:
Question 20: The correct answer is C) Develop an anomaly detection system.

Why: An anomaly detection system identifies unusual or suspicious behavior, such as IP addresses that deviate from normal traffic patterns, and can trigger alerts to protect the application.

Why the others are not suitable:

- A. Build a speech recognition system: unrelated to IP threat detection. - B. NLP named entity recognition: extracts entities from text, not for network security. - D. Fraud forecasting system: predicts future fraud events, not real-time detection of suspicious IPs.
Tip: In practice, you’d model normal IP traffic using features like frequency, geo/location, ASN, and access patterns, then flag deviations with methods such as isolation forests or autoencoders.
Bengaluru, India

AI Explanation - verified by pebefah636 on: May 26, 2026
Question 169:
The correct answer to Question 169 is Elasticity (B).

What elasticity means: The cloud automatically scales resources up or down based on demand to handle short-term fluctuations. This lets you quickly respond to spikes (e.g., a sale or event) and then scale back down when demand falls.

Why not the others:

- Efficiency: about using resources effectively, not specifically auto-scaling. - Multitenancy: sharing resources among many tenants; not about scaling with demand. - Scalability: the capacity to handle growth in load, but not necessarily automatically or for short-term fluctuations.
In short, elasticity is the dynamic, automatic adjustment of resources to match varying workload levels over short periods, while scalability is more about long-term capacity.
Anonymous

AI Explanation - verified by User6888 on: May 26, 2026
Question 26:
Here’s a targeted explanation of Question 26.
What the question is asking

You need to design a custom RBAC role (CR1) that

- can be assigned only to resource groups in Subscription1 - prevents management of access permissions (i.e., no role to grant other permissions) - allows users to view, create, modify, and delete resources inside those resource groups
Key RBAC concept in play

The role’s assignable scope determines where the role can be assigned. To limit the role to “the resource groups in Subscription1,” you want the scope to be at the resource-group level (not at the subscription or management group level). This lets you grant the role to specific resource groups or to all resource groups in the subscription, depending on how you apply the role.

The permission elements (the Actions) define what you can do inside those scopes. Since you need to manage resources inside the groups (view/create/modify/delete), you need actions that cover resource operations inside the resource groups, while not including capabilities to manage role assignments.

What to select (conceptually)

Assignable scopes: Resource group scope(s) within Subscription1

- Example format: /subscriptions/{subscriptionId}/resourceGroups/* (applies to all RGs in the subscription) - If the UI requires a single scope, you’d use a resource group scope for each RG you want CR1 to apply to; the key is that the scope is at the resource-group level, not the entire subscription.

Permission elements (Actions): allow read/write/delete for resources inside the groups

- Examples: - Microsoft.Resources/subscriptions/resourceGroups/resources/read
Anonymous

AI Explanation - verified by User5463 on: May 26, 2026
Question 95:

Correct answer: Accounts.

Why: A queue is a way to assign ownership of records to a group. In Salesforce, queues are supported on standard objects like Leads and Cases and on Custom Objects. Accounts do not support queues, so they cannot be added to a queue.

Quick check tips:

- To see if an object supports queues, go to Setup > Object Manager > [Object] and look for a Queues option. - If an object has Queues, you can create a queue and assign records to it; otherwise, you cannot.
Mumbai, India

AI Explanation - verified by cymamac on: May 26, 2026
Question 115:
Question 115: How is Primary Key used?

The correct answer: C

Why:

- A is not accurate: Primary Key is not specifically about defining a Send Relationship. - B is incomplete: while a primary key can be the subscriber identifier, the primary purpose is not “identifying a subscriber” in general. - C is correct: a Primary Key identifies a row (or a combination of fields) in a data extension as unique. It enforces row-level uniqueness. - D is incorrect: a primary key enforces uniqueness, but it does not inherently prevent overwriting of data.
Note: The provided answer key on the page lists D, but that is not the best description of how Primary Key works in Marketing Cloud data extensions.
Los Angeles, United States

unknown gun man on: May 26, 2026
Yes, it's best for practicing and learning.
Pune, India

AI Explanation - verified by User8731 on: May 26, 2026
Question 16:

Correct answer: D

Why: Evaluation metrics measure how well a model generalizes to unseen data. You review them after you have trained the model and evaluated it on a validation set (or test set) to judge performance and compare models or tune hyperparameters.

Why the others are not correct:

- A: Before you train a model — you don’t have metrics to review yet. - B: After you clean the data — cleaning affects data quality, not the act of evaluating model performance. - C: Before you choose the type of model — you typically compare models by evaluating them on data, not by reviewing metrics before training.

Quick nuance: In practice, you may compute and review metrics multiple times (e.g., during cross-validation), but the point of reviewing metrics is always after evaluation on data the model hasn’t been trained on.

Willowdale, Canada

AI Explanation - verified by ciyahroberts on: May 26, 2026
Question 446:
Here’s how to get R1 to be the DR on the Ethernet segment shown.
Key concept:

DR/BDR elections happen on multiaccess networks (e.g., Ethernet). Each router interface on that network has an OSPF priority (default is 1). A router with priority 0 cannot become DR/BDR. The DR is the router with the highest priority; if there’s a tie, the highest router-id wins.

Two required configurations:

On R3 (the other router on the network), set the interface priority to 0:

- ip ospf priority 0 This disables R3 from becoming DR/BDR.

On R1 (the router you want as DR), set a higher priority (nonzero):

- ip ospf priority 200 This gives R1 a higher chance of becoming DR than R3 (which is 0) and others on the segment.
Notes:

The router-id on R1 (192.168.100.1) is only a tie-breaker if priorities are equal; since R1’s priority is 200, the router-id won’t affect DR election here.

Washington, United States

AI Explanation - verified by User8639 on: May 25, 2026
Question 123:
La réponse A est correcte: Emma a un rôle opérationnel dans le SMI (ISMS), ce qui viole l’exigence d’indépendance du processus d’audit interne selon ISO/IEC 27001.
Pourquoi A est non conforme:

L’audit interne doit être réalisé par du personnel indépendant des activités auditées. Cette indépendance garantit l’objectivité et l’impartialité des conclusions.

En étant à la fois responsable opérationnel du SMI et assignée pour conduire l’audit, Emma présente un conflit d’intérêts potentiel: ses actions peuvent être influencées par sa position, ce qui compromet l’intégrité des résultats.

ISO/IEC 27001 prévoit que l’audit interne soit effectué par des personnes compétentes et indépendantes, et que les résultats soient rapportés à la direction ou au comité d’audit. Le fait qu’elle soit membre du personnel et qu’elle ait un rôle opérationnel remets en cause cette indépendance.

Actions recommandées:

Séparer les responsabilités: désigner une équipe d’audit interne indépendante (ou externaliser partiellement) et faire rapporter les résultats à la direction ou au comité d’audit.

Établir des mécanismes de rotation et de vérification croisée pour garantir l’objectivité des audits.

Anonymous

AI Explanation - verified by User4210 on: May 25, 2026
Question 16:

Correct answer: A — Edit Account Name field and select the Unique Checkbox.

Why:

HLOOKUP/VLOOKUP are Excel functions and don’t apply to Salesforce validation rules.

To ensure a value is unique across records, you use the field’s Unique attribute. Setting the Account Name field to Unique enforces a database-level constraint so no two accounts can share the same name.

Notes:

If duplicates already exist, you must clean them before enabling the Unique setting, otherwise enabling it may fail.

Apex triggers could enforce uniqueness too, but for this requirement the built-in Unique checkbox is the proper declarative solution.

São Paulo, Brazil

AI Explanation - verified by User4210 on: May 25, 2026
Question 14:
Question 14 asks how to troubleshoot why Dylan’s manager isn’t receiving email alerts.

Correct answer: A) Email Log

Why:

The Email Log shows emails Salesforce attempted to send, who they were sent to, when, and the delivery status (delivered, bounced, deferred). It’s the primary tool to verify whether the alert was generated and sent, and to diagnose delivery problems.

What to check in the Email Log:

Time range around the vacation request submission.

Recipient email address and whether the email was sent or bounced.

Any bounce or failure messages that indicate deliverability issues.

Why the other options aren’t as suitable:

Setup Audit Trail tracks configuration changes, not email delivery.

Debug Log captures code execution (like Apex or workflow execution) but not explicit delivery outcomes for an email alert.

Time-Based Workflow schedules actions; it doesn’t help diagnose why an email didn’t arrive.

São Paulo, Brazil

AI Explanation - verified by User4210 on: May 25, 2026
Question 13:
Question 13 asks about troubleshooting a missing field on a page layout. The correct choice is:

Setup Audit Trail

Why:

The Setup Audit Trail records recent changes to your org’s configuration, including updates to page layouts and field accessibility. By reviewing who changed the page layout and when, you can determine if the field was removed from the layout or hidden via security settings.

How to use it:

In Setup, go to View Setup Audit Trail (Lightning or Classic). It lists recent configuration changes with who made them and when.

Look for changes related to the affected object’s page layout or field security. If you find a relevant change, you can revert or adjust the layout accordingly.

Other options:

Field History Tracking logs changes to field values on records, not visibility on layouts.

System Log shows runtime/system events, not layout configuration changes.

Field Audit tracks field value changes for compliance-style needs, not layout visibility in general.

So, Setup Audit Trail is the appropriate tool to troubleshoot a missing field on a page layout.
São Paulo, Brazil

AI Explanation - verified by User4210 on: May 25, 2026
yes, portuguese
Claro — posso explicar em português. Abaixo estão as perguntas da página com a resposta indicada pela banca e uma explicação rápida.

Q1

- Resposta correta (pela banca): A – Create Sharing rule in Position - Explicação: Em um relacionamento Master-Detail entre Position (mestre) e Job Opening (detalhe), o acesso do usuário aos detalhes é herdado do mestre. Para permitir edição dos Job Openings, normalmente cria-se uma Sharing Rule no objeto Position (mestre) para conceder acesso.

Q2

- Resposta correta (pela banca): A – Create Validation rule e usar VLOOKUP para checar o ZIP contra o Estado de cobrança - Explicação: Cria-se uma regra de validação que valida o ZIP com base em um mapeamento de estados. Funções de lookup/validação ajudam a assegurar que o ZIP corresponde ao estado informado.

Q3

- Resposta correta (pela banca): C – Use LinkedIn para ver informações do contato - Explicação: Enriquecimento de dados via social geralmente envolve integrações com plataformas de redes profissionais como LinkedIn para exibir informações públicas do contato.

Q4

- Resposta correta (pela banca): B – View Account records regardless of the account record owner - Explicação: Com Territory Management, o acesso às contas costuma depender da associação de território; usuários podem ver contas dentro do território, independentemente de quem é o proprietário da conta. A edição/transferência de Oportunidades também é controlada por regras de território.

Q5

- Resposta correta (pela banca): A, B – Entrar com agente de chat ao
São Paulo, Brazil

AI Explanation - verified by User9032 on: May 25, 2026
Question 10:
Here’s why Question 10 is answered as No.

Goal: Ensure the Azure solution uses the correct expenditure model when moving VMs from on-prem to Azure pay-as-you-go.

Given solution: “Use the elastic expenditure model.” Elasticity describes how resources scale, not a formal cost category in Azure.

Microsoft cost models: The typical models are capital expenditure (CAPEX) vs operational expenditure (OPEX). For Azure pay-as-you-go, the correct model is OPEX (pay-as-you-go).

Conclusion: Since “elastic expenditure model” isn’t a recognized Azure expenditure model, the solution does not meet the goal. The correct approach would be OPEX / pay-as-you-go (with optional Reserved Instances later for cost savings).

Abuja, Nigeria

AI Explanation - verified by User4747 on: May 25, 2026
Question 479:
Question 479 asks: Which of the following is MOST important for an information security manager to ensure when evaluating change requests?

The answer key shown here marks D, but the more defensible choice based on ISACA risk management is C: residual risk is within risk tolerance.

Why C is the best:

Core principle: Change requests should not push risk beyond what the organization is willing to accept. Ensuring residual risk remains within the defined risk tolerance directly aligns with risk management objectives.

A (approval by process owners) is important for governance, but it’s not the primary risk criterion you must verify before accepting a change.

B (requests add value) is desirable, but value alone doesn’t guarantee risk is acceptable.

D (contingency plans created) is valuable for continuity, but having a contingency plan is not the single most important gate to approving a change from a risk perspective.

Bottom line: For evaluating change requests, you should focus on keeping residual risk within the organization’s risk tolerance (C). If you’re studying from this question bank, note that the stated key (D) is inconsistent with standard ISACA risk management guidance.
Dortmund, Germany

AI Explanation - verified by User9032 on: May 25, 2026
Question 4:

Answer: No

Why: Deploying Azure virtual machines is an IaaS (Infrastructure as a Service) task. SaaS (Software as a Service) delivers pre-built software over the internet; you don’t manage the underlying VM or OS. PaaS provides a platform to develop/run apps with managed runtime, but not necessarily full VM provisioning. Since the goal is to deploy VMs, the correct deployment model is IaaS, not SaaS. Examples: deploying Azure Virtual Machines or VM Scale Sets are IaaS tasks.

Abuja, Nigeria

AI Explanation - verified by a.yakup2021 on: May 25, 2026
Question 16:
Answer: D
Explanation:

In the ML workflow, you train on the training data and then evaluate performance on the validation data using metrics (e.g., accuracy, precision, recall).

You review these evaluation metrics after you test a model on the validation data to compare models and decide whether to improve or select a model.

Before training or before data cleaning, metrics aren’t meaningful because there’s nothing to evaluate yet. Also, you should keep a separate test set for final performance estimation.

Anonymous

AI Explanation - verified by a.yakup2021 on: May 25, 2026
A banking system that predicts whether a loan will be repaid is an example of the clustering regression classification type of machine learning.
Classification.

Why: You’re predicting a discrete outcome (will the loan be repaid or not). That’s a binary class label, which fits classification.

If a model outputs a probability (e.g., probability of repayment), you apply a threshold to assign the final class—still a classification task (often referred to as binary classification or credit scoring).

Contrast:

- Regression would predict a numeric value (e.g., amount repaid, loss amount). - Clustering is unsupervised and groups similar loans, not predicting a repayment label.
Anonymous

AI Explanation - verified by a.yakup2021 on: May 25, 2026
Data values that used to make a prediction are called dependant variables. features. identifiers. labels.
features

Explanation: In machine learning, features are the input data values used by the model to make predictions. The dependent variable (often called the label or target) is what you aim to predict.

Anonymous

AI Explanation - verified by User2009 on: May 25, 2026
Question 1:
I can’t see the image in Question 1, but the topic is likely choosing the right type of analytics to complete a sentence. Based on the reference about descriptive, diagnostic, predictive, and cognitive analytics, here are the basics:

Descriptive analytics: summarizes what happened in the past (answers: what happened?).

Diagnostic analytics: explains why it happened (answers: why did it happen?).

Predictive analytics: forecasts what might happen in the future (answers: what could happen?).

Cognitive analytics: uses AI to simulate human reasoning and handle complex or unstructured data (answers: how can we interpret and respond like a human?).

How to decide which to pick:

If the sentence is about summarizing past data, choose Descriptive.

If it’s about finding causes, choose Diagnostic.

If it’s about forecasting future results, choose Predictive.

If it involves AI reasoning or handling unstructured data, choose Cognitive.

If you share the exact sentence and the options (A, B, C, D), I’ll explain which one fits and why.
Hyderabad, India

AI Explanation - verified by poricardo1031 on: May 25, 2026
Question 86:

Correct answer: C: Run the Opportunity Stage Duration report.

Why:

The request is about monitoring how long opportunities stay in each sales stage and obtaining a daily average. Salesforce’s standard Opportunity Stage Duration report is specifically designed to show the average number of days opportunities spend in each stage, enabling you to measure cycle times and identify bottlenecks.

Why the other options are less suitable:

A) Use process builder to capture the daily average on each opportunity. Process Builder automates actions on a record but does not provide a built-in, cross-record daily average metric across all opportunities.

B) Add Formula Fields to track Stages on each Opportunity. While you can track stage changes, formula fields alone aren’t practical for calculating duration across multiple records or producing a reliable daily average without complex logic and data housekeeping.

D) Refresh weekly reporting snapshots for Closed Opportunities. Snapshots capture data over time, but focusing on closed opportunities isn’t aligned with measuring current stage durations or daily averages across active opportunities.

Tip: To actually use this, go to Reports, create/run a report using the Opportunity Stage Duration report type and filter as needed to view average days per stage.
Stockholm, Sweden

AI Explanation - verified by oguntadedeb on: May 25, 2026
Question 3:
Correct answer: Power BI dataset (A)
Explanation:

Using a Power BI dataset lets you reuse an existing data model that already contains measures. You can build the new report by connecting to that published dataset (Get Data > Power BI dataset or from the service) and immediately use the existing measures, visuals, and relationships. This minimizes development effort since you don’t have to recreate the model or measures.

Why the others are less suitable:

- “a SharePoint folder”: would require creating a new dataset from the Excel file and rebuilding measures. - “Power BI dataflows”: would create a new dataflow ETL layer without automatically importing the existing measures; you’d still need to recreate the model/logic. - “an Excel workbook”: would re-import data into a new dataset and typically require rebuilding measures and relationships.
Lagos, Nigeria

AI Explanation - verified by martinivanov77 on: May 25, 2026
Question 303:
Question 303 asks: In an agile project, the sponsor wants a cost estimation to build the business case. What should the project manager do first?
The answer key shows D, but I think the correct approach is A: Ensure the client representative is involved in the estimation.
Why A is the best choice:

Stakeholder involvement: In agile, the client (or product owner) is a primary stakeholder. Involving a client representative during estimation helps ensure the estimate reflects value, priorities, and real constraints.

Alignment on value and scope: Early collaboration helps align expectations about what is worth funding and what trade-offs are acceptable, which is critical for a credible business case.

Reduces rework risk: Getting input from the client early reduces the chance of later changes that could invalidate the business case.

Why the other options are less appropriate here:

B (20% contingency): Agile budgeting tends to be flexible and risk-informed rather than a fixed percentage contingency.

C (Review completion costs of similar projects): While historical data can inform estimates, the question is about what to do first; without stakeholder input, the estimate may miss value-focused considerations.

D (Lessons learned from similar projects): Useful for context, but not a sufficient or primary action to initiate the estimation for a new agile business case.

In short: start with collaborative estimation involving the client representative (A). If you’d like, I can walk through an example of how to structure that joint estimation.
Sofia, Bulgaria

parthasarathi on: May 25, 2026
dumps are having correct answers,
Bengaluru, India

AI Explanation - verified by User3464 on: May 25, 2026
Question 3:
Question 3 asks: If Basic support doesn’t cover an assessment of an Azure environment’s design, would subscribing to Premier be the minimum-cost way to obtain such an architecture/design assessment from Microsoft?
Key idea:

The goal is to get a design/architecture assessment from Microsoft.

Basic is out, so you need a plan that includes architecture review or equivalent advisory services.

Premier is a high-level, enterprise plan that historically includes architecture reviews, but it may not be the cheapest option that provides this capability.

Why this is tricky:

Some other plans (e.g., Professional Direct) may also include architectural guidance or design reviews, potentially at a lower cost than Premier.

If another plan provides the same service, Premier isn’t the minimum-cost choice, so the statement “Premier is the right minimum-cost plan” would be wrong.

Bottom line:

The exam answer given (No) says Premier is not the minimum-cost option.

In practice, verify with the current Azure Support Plans documentation which plans include architecture/design reviews to confirm which is truly the cheapest option that meets the requirement.

If you’d like, I can summarize the current plan offerings and which include architecture reviews.
Hyderabad, India

AI Explanation - verified by User2855 on: May 24, 2026
Question 21:
Here’s how to approach Question 21.

Correct answer (per the provided key): C — “Damage to the monitor has the highest percentage.”

Why that makes sense:

In issue triage, you prioritize problems by impact or frequency. Addressing the issue that occurs most often (highest percentage) reduces the overall number of problems and rework. This aligns with applying a Pareto principle mindset: fix the biggest chunk of problems first.

Why not A or B:

- A (replace missing peripherals) is easy/low cost but may not address the root reliability problems or the largest share of failures. - B (old OS issue) is important, but if hardware damage is more prevalent, fixing the hardware issue yields a bigger early payoff.

Why not D:

- “Address each issue as discovered” can lead to ongoing rework and inefficiency without a focused triage.
Note: I can’t see the image, but the principle stands: prioritize the issue with the highest incidence/impact to reduce overall problems first. If you want, share details from the image and I’ll tailor the reasoning.
Atlanta, United States

AI Explanation - verified by User1409 on: May 24, 2026
Question 26:
The answer key shows A, but the better approach is B.
Why B is correct:

Asynchronous requests (async = true) keep the UI rendering from being blocked. If you set async to false, the browser blocks rendering until the API call completes, which defeats the goal of not delaying the UI.

When the API times out or errors, you can omit or hide the widget that would display API data, keeping the rest of the UI responsive. This matches the requirement that some API data may not display and that the UI should render quickly.

How to implement (high level):

Use XMLHttpRequest with open(..., true) (async).

Set a timeout (e.g., xhr.timeout = 5000) and handlers for onload, onerror, and ontimeout.

On success, render the API data. On error/timeout, hide or skip the API widget and optionally show a lightweight placeholder.

Notes:

Avoid retry loops in the UI thread; if you need retries, handle them in a non-blocking way after a timeout with backoff, but don’t block rendering.

Toronto, Canada

AI Explanation - verified by User1409 on: May 24, 2026
Question 12:
Question 12 is about using a health check to drive traffic routing in GKE with Ingress.

Core idea: To have the load balancer route traffic only to healthy pods, you should configure a Kubernetes readiness probe on the pod that checks the app’s health endpoint (here, /healthz). The Ingress controller uses the readiness state to determine which pods are endpoints.

What to include in the Pod spec: a readinessProbe with an HTTP GET to /healthz on the container port. Example (conceptual):

- readinessProbe: - httpGet: - path: /healthz - port: 80 (or the app port) - initialDelaySeconds: 5 - periodSeconds: 10

Important caveat: The Pods must exist (replicas > 0) at the time you create the Ingress; if you scale to 0, the Ingress will fall back to its default health check and won’t use your readinessProbe.

Why: Readiness probes mark pods as ready to receive traffic; only ready pods are added to the Ingress backend endpoints.

In short: include a readinessProbe that checks /healthz, and ensure at least one pod is running when creating the Ingress.
Toronto, Canada

AI Explanation - verified by essamsaleh20502050 on: May 24, 2026
Question 7:
I can’t view the image for Question 7, so I can’t confirm the exact wiring of the eight 8 O drivers. The impedance of the whole speaker system depends on how the drivers are connected (series vs. parallel).
How to figure it out:

Each driver: Z = 8 O.

If drivers are in series, impedances add: Z_series = Z1 + Z2 + ... = 8 × (number in series).

If drivers are in parallel, impedances combine as: 1/Z_parallel = 1/Z1 + 1/Z2 + ...; for identical drivers: Z_parallel = 8 O ÷ (number in parallel).

For mixed arrangements, reduce step by step (combine small groups first, then combine those results).

Two common patterns (just as examples):

Four pairs in parallel, with the four pairs in series: each pair = 8||8 = 4 O; four in series ? 4 × 4 O = 16 O.

Two banks of four in parallel, connected in series: each bank = 8||8||8||8 = 2 O; in series ? 2 O + 2 O = 4 O.

If you can describe how the eight drivers are wired (e.g., “two in parallel in four groups in series,” or share a quick sketch), I’ll compute the exact impedance for Question 7.
Riyadh, Saudi Arabia

AI Explanation - verified by User4079 on: May 24, 2026
Question 22:
Answer: D – the business case

Why: The business case defines the expected benefits, success criteria, and measurement methods for a project. To determine if benefits have been achieved, an IS auditor should compare realized results against those projected benefits and KPIs laid out in the business case.

Why not the others:

- Project schedule focuses on timing, not benefits realization. - QA results assess quality processes, not whether intended benefits were realized. - Post-implementation issues are important but are indicators of problems; they don’t directly establish whether benefits were achieved as planned.

Practical note: Look for realized benefits metrics (ROI, cost savings, revenue impact, efficiency gains) and compare them to the business case targets.

Chennai, India

AI Explanation - verified by User4836 on: May 24, 2026
Question 2:
The correct choice is C: From the Microsoft Entra Connect wizard, select Customize synchronization options.
Why:

You need to choose which OUs to synchronize. The Montreal Users OU and Seattle Users OU must be included in the sync scope, which is configured under “Customize synchronization options” in the Entra Connect wizard.

A (Add-ADSyncConnectorAttributeInclusion) is for including specific attributes, not for selecting which OUs to sync.

B (Manage federation) is about federation configuration (e.g., AD FS) and isn’t related to OU scope.

D (Start-ADSyncSyncCycle) triggers a synchronization, but it doesn’t change which OUs are synchronized.

So, use the Entra Connect wizard ? Customize synchronization options ? select the Montreal Users OU and Seattle Users OU to include them in the sync.
Cape Town, South Africa

AI Explanation - verified by User5993 on: May 24, 2026
Question 46:
I can’t see the image options, but here’s the correct approach and why it works.

Core idea: To define a custom sitemap, you must work with a model-driven app and customize its site map.

How to do it:

- Create or open a Dataverse solution in Power Apps. - Include a Site Map (SiteMap) component in the solution. - Use the Site Map designer to add and organize: - Areas (top-level navigation sections) - Groups (sub-sections within an area) - Subareas (links to entities, dashboards, or external URLs) - Save and publish the sitemap, then deploy it to your model-driven app.

Why this is the right approach: Canvas apps don’t support a custom sitemap; the sitemap is a model-driven app navigation feature. The designer provides a structured way to map navigation to your data and dashboards, improving user workflow and alignment with business processes.

If you can share the exact options text, I can map them to this explanation and confirm which option matches.
Sonipat, India

AI Explanation - verified by User1326 on: May 24, 2026
Question 14:
The correct answer is B: “Suggest using an agile approach since customer and team collaboration is critical for project success.”
Why this fits:

The scenario prioritizes collaboration with the business. Agile methods emphasize continuous customer involvement, frequent feedback, and cross-functional teamwork, which aligns with the need for strong collaboration.

PMI guidance supports using agile or hybrid approaches when stakeholder collaboration and adaptability are important.

Why the other options are less suitable:

A: Too vague and doesn’t prescribe a concrete approach to improve collaboration.

C: Daily customer updates are burdensome and not a typical or scalable requirement; misses the agile emphasis on ongoing collaboration, not micromanagement.

D: A template alone doesn’t address the critical need for close business collaboration and adaptability.

Key PMI concepts involved:

Stakeholder engagement and collaboration

Adaptive life cycles and agile project management

Tailoring project approaches to context to maximize collaboration and value delivery

Mumbai, India

AI Explanation - verified by chatterjeesaurav8815 on: May 24, 2026
Question 117:
The correct answer is A: Azure Cosmos DB for NoSQL.
Why this fits the requirements:

Multi-master writes / global distribution: Cosmos DB can be configured for multiple regions with multi-region, multi-master writes, so you can read and write in any region with automatic failover.

Low-latency reads: Cosmos DB provides very low latency reads across globally distributed regions (SLA typically in the single-digit millisecond range at the 99th percentile).

SQL-style queries: The Core (SQL) API in Cosmos DB supports SQL-like queries over JSON data, so you can use SQL commands for querying.

Why the other options don’t meet all requirements:

Azure SQL Database with active geo-replication: supports reads in other regions but not true multi-master writes; writes occur in a single primary region.

Azure SQL Database Hyperscale: mainly scales reads and storage; not multi-master writes across regions.

Azure Cosmos DB for PostgreSQL: relational, but the question emphasizes multi-master writes across regions; Cosmos DB’s multi-region writes are more directly aligned with that requirement, though Cosmos DB APIs include PostgreSQL as an option.

Tip: When a question asks for SQL-style querying plus global multi-region writes with low latency, Cosmos DB (especially with the NoSQL/Core SQL API) is typically the best-fit.
Kolkata, India

AI Explanation - verified by User4393 on: May 23, 2026
Question 73:
The best choice is 802.1X (D).

Why: 802.1X is a port-based Network Access Control (NAC) mechanism. It requires each device to authenticate before the switch port grants access to the network.

How it works: The switch (authenticator) blocks the port until the endpoint (supplicant) proves identity (via a RADIUS server). If authentication fails, the port stays restricted or locked to a guest VLAN, preventing unknown devices from connecting.

Why not the others:

- ACLs can block traffic but don’t prevent a device from connecting to a switch port in the first place; they’re less effective for enforcing initial access control. - Perimeter networking relates to segmentation at the network edge, not per-port access control for devices plugged into an office area. - The option SSE isn’t applicable here.
In short, 802.1X is the standard approach to prevent unauthorized devices from gaining access on ports in areas reachable by customers.
Harrisburg, United States

AI Explanation - verified by User5872 on: May 23, 2026
Question 17:

Answer: A. A UI Policy's Actions execute before the UI Policy's Scripts.

Explanation:

- UI Policies have two parts that affect form fields: Actions (predefined changes like Mandatory, Read-Only, Visible, Default) and an optional Script (custom JavaScript for more complex logic). - Actions are evaluated and applied first when the policy conditions are met. - Then, if the policy conditions still apply, the Script runs. This means a Script can override an earlier Action (e.g., turning a field back to not mandatory after an Action made it mandatory). - The other options are not correct: the order is not determined at runtime, scripts don’t run before actions, and actions and scripts don’t execute simultaneously.
Pune, India

AI Tutor 👋 I’m here to help!

AI Tutor — 300-206

Hello,
I’m your AI study assistant for the 300-206 exam. Ask me anything about the exam or the questions on this page, and I’ll break it down so it actually makes sense.
You want it in a different language? Just say it.

300-206 21

Community Feedback

💬 Did you find this helpful?

Your name:

Thank you for sharing! Your feedback helps the community.

Contact Us

Exam Vendors

Hay AI, Learn About Us

Customer Reviews

DMCA

Terms of Service

Privacy Policy

© 2026 Free-Braindumps.com - A Community of Learners.
Free-Braindumps.com is owned by Xùnliàn Limited, a company registered at 15 Wang Chiu Rd, Kowloon Bay, Hong Kong.

The resources, practice tests, and study guides on Free-Braindumps.com are strictly for educational and research purposes. We are an independent community platform and are not affiliated with, endorsed by, or sponsored by any official certification vendors, including Microsoft, Cisco, Amazon, CompTIA, or others. All certification names, trademarks, and logos are the property of their respective owners. Our content is user-contributed or independently developed to assist with exam preparation and skill assessment; we do not host or provide access to proprietary, confidential, or live exam questions.

Cisco 300-206 Exam Questions Implementing Cisco Edge Network Security Solutions (RETIRED) (Page 21 )

QUESTION: 77

QUESTION: 78

QUESTION: 79

QUESTION: 80

300-206 Exam Discussions & Posts (Share your experience with others)

Cisco 300-206 Exam Questions
Implementing Cisco Edge Network Security Solutions (RETIRED) (Page 21 )