Cisco 300-445 Exam Prep
Designing and Implementing Enterprise Network Assurance (Page 7 )

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

• WPA3: Secures wireless traffic but does not normally verify whether someone has paid.
• PSK: A shared Wi-Fi password gives access to anyone who knows it; it cannot easily validate individual receipts.
• IEEE 802.1X: Provides user/device authentication, commonly through an authentication server, but is excessive and not designed specifically for a simple receipt-based guest-access workflow.

• Limiting the number of MAC addresses allowed on a switch port
• Restricting ports to specific known MAC addresses
• Taking an action—such as dropping frames or shutting down the port—when the limit is exceeded

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but is not the primary control for switch-port MAC limits.
• NGFW: Filters network traffic at the firewall, but does not directly control MAC addresses learned by a switch.

• Distinct values = 69

• Unique values = 4

• A — Tables
• B — Named file formats
• C — Schemas
• E — Databases

Why these are correct

• Tables: Can be cloned using CREATE TABLE ... CLONE. The clone initially uses zero-copy cloning, so storage is shared until changes are made.
• Named file formats: Can be cloned as database objects, preserving the file-format definition.
• Schemas: A schema and its eligible objects can be cloned.
• Databases: A database and its eligible schemas and objects can be cloned.

Why the others are incorrect

• Shares: A share is an account-level data-sharing object, not a normal cloneable database object.
• Users: Users are security principals and cannot be cloned with CLONE.

• A: Knowledge of IT platforms, networks, and methodologies — Useful technical knowledge, but the CISO does not need to be the deepest technical expert.
• C: Regulatory and project management knowledge — Important, but compliance and projects must still support the organization’s broader needs.
• D: Managing people and resources — Essential for execution, but effective management of the wrong security priorities will not produce good results.

• Lower order numbers appear first.
• For example, a variable with order 100 appears before one with order 200.
• The Sequence field is not the control used for catalog variable display order.
• The Default Value sets a value, not placement.
• The Choice field defines selectable options, not the variable’s position.

• The message came from the claimed sender (authentication)
• The message was not altered (integrity)
• The sender cannot easily deny sending it (non-repudiation)

• Attackers can send unsigned phishing emails.
• Attackers may compromise a legitimate account and send signed malicious emails.
• Users may still be tricked by a validly signed message.

• Amazon S3 as the origin for static content
• Application Load Balancer (ALB) as the origin for dynamic content
• Amazon Route 53 configured to point the company’s domain name to CloudFront

• /static/* ? S3 origin; cache content at edge locations
• Dynamic paths such as /api/* ? ALB origin; forward requests to the EC2 application

• MFA adds an additional authentication factor, such as a phone notification or verification code.
• It helps prevent unauthorized sign-ins, even if a password is compromised.
• It does not encrypt, store, or protect credentials used by deployment processes.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity there is a strong indicator of compromise.
• DNS sinkholes: Redirect malicious or suspicious DNS requests to a controlled destination. This can identify infected systems attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it is not an attacker-detection method.
• CI/CD: Automates software development, testing, and deployment.
• Threat modeling: Identifies potential threats and weaknesses before or during system design; it does not directly detect an active infiltrator.
• Data obfuscation: Makes information harder to understand, but does not identify attackers.

DAX 
Sales % of Total = 
DIVIDE( 
    [Total Sales], 
    CALCULATE( 
        [Total Sales], 
        ALLSELECTED(Products) 
    ) 
)

DAX 
Total Sales = 
SUM(Sales[SalesAmount])

Why ALLSELECTED is required

• The numerator, [Total Sales], is evaluated for the current product.
• ALLSELECTED(Products) removes the current product’s visual filter when calculating the denominator.
• It preserves filters applied at the report, page, or slicer level.

Why not ALL(Products)?

DAX 
CALCULATE([Total Sales], ALL(Products))

• Confirming the data has the required columns and data types
• Handling missing or duplicate records
• Converting data into a suitable format
• Selecting or engineering useful features
• Splitting it into training, validation, and test sets

1. Prepare the training data
2. Select an algorithm or configure AutoML
3. Train the model
4. Evaluate its performance
5. Tune hyperparameters if needed
6. Deploy the model

• Containment policy: controls permitted communication during containment.
• Detection/response configuration: determines when containment is initiated.

• Honeypots: Decoy systems designed to attract attackers. Legitimate users should not access them, so activity there is a strong indication of unauthorized access.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal destination instead of the real attacker infrastructure. Security teams can then identify infected systems making those requests.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not detect intruders.
• CI/CD: Software development and deployment processes.
• Threat modeling: Identifies potential threats before or during system design, rather than detecting successful infiltration.
• Data obfuscation: Makes information harder to understand, but is not an attacker-detection mechanism.

• C: Develop the rule in the Rules Editor, define the events, match, and condition sections, then use the test rule feature. This directly validates the YARA-L rule without enabling it in production.
• A: UDM Search can help investigate data and refine filters, but it does not fully test YARA-L logic—especially complex event joins, match windows, and conditions.

• Menerjemahkan soal ke bahasa Indonesia.
• Menyebutkan jawaban yang benar.
• Menjelaskan alasan jawaban tersebut.
• Memberi tahu jika kunci jawaban yang tersedia tampaknya keliru.
• Menjelaskan istilah teknis penting dalam soal.

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized or malicious activity. They do not directly stop the action; they influence behavior.
• Detective control: CCTV records or monitors activity so security personnel can identify events or investigate them afterward.

• Preventive: Stops an incident from occurring, such as access control.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: An alternative control used when the preferred control is not feasible.

• Structure requirements documents
• Draft user stories and acceptance criteria
• Create templates for functional and nonfunctional requirements
• Turn natural-language descriptions into organized documentation or implementation examples

• A: “Automatically generating detailed requirements documents” overstates Copilot’s role; it assists but does not independently determine complete requirements.
• C: /help provides guidance about Copilot features, not reliable requirements-conflict detection.
• D: Stakeholder communication and meetings remain human responsibilities.

• Identify the causes of delays.
• Improve its workflow and collaboration.
• Adjust tools or development practices.
• Discuss improvements during retrospectives and apply them in future sprints.

• A: An impediment log can help track issues, but merely maintaining one does not remove the impediments.
• B: Directing the team toward solutions reduces team ownership and self-organization.
• C: Adding impediments to the product backlog may be appropriate in some cases, but it does not automatically ensure they are addressed promptly.
• D: Best reflects agile leadership: empowerment, continuous improvement, and removal of impediments.

• Insert is used when you are creating a new record. It saves the record to the table and then leaves the form.
• Update is used when editing an existing record. It saves the modifications and then leaves the form.

• Set credit quotas for an account or individual virtual warehouses.
• Define monitoring intervals.
• Trigger actions when usage reaches thresholds, such as sending notifications or suspending a warehouse.
• Help control unexpected warehouse spending.

• Account Usage: Provides historical usage and billing data; it does not enforce credit limits.
• Warehouse Limit Parameter: Not the Snowflake object used for account-wide credit controls.
• Credit Consumption Tracker: Not a standard Snowflake object.

• Review the risk register.
• Check the documented risk response strategy, such as using a backup resource, reallocating work, or adjusting sequencing.
• Implement the planned response promptly.

• B: Moving the task may affect the critical path and should not be done without first evaluating the planned response and impacts.
• C: Excluding a required task would change scope and business requirements without proper analysis or approval.
• D: Updating lessons learned and the risk log may be appropriate later, but it does not address the immediate problem. First, execute the response.

• Firewalls and routers
• Servers and applications
• Endpoint devices
• Authentication systems
• Cloud services

• Centralized log collection
• Event correlation
• Dashboards and reporting
• Alerting
• Compliance support

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

• Azure DevOps Analytics views are accessed through the Power BI Azure DevOps (Boards only) connector.
• This connector authenticates directly to Azure DevOps Services and lets you select an Analytics view.
• Analytics views allow filtering and shaping data in the cloud before Power BI loads it.
• Azure DevOps Server (Boards only) is for an on-premises Azure DevOps Server instance, not Azure DevOps cloud.
• A generic OData Feed connection can access OData endpoints, but it is not the purpose-built connector for Azure DevOps Analytics views.
• “OData queries” describes the underlying technology or query approach, not the most appropriate Azure DevOps connector choice here.

• SOSL searches text across objects and is not appropriate for selecting Account table columns.
• describeSObjects() provides metadata about objects and fields, but it does not itself build or execute the query.
• Dynamic Schema binding supports runtime determination of object and field information, which is required here.
• REST API is unnecessary because this is being implemented in Apex.

• The team should inspect its way of working during retrospectives.
• The team can identify root causes of delays and agree on process improvements.
• The leader facilitates the removal of impediments and provides support, but does not impose solutions.

• A: An impediment log can help track issues, but documentation alone does not resolve them.
• B: Directing the team toward solutions conflicts with agile empowerment and self-management.
• C: Adding impediments to the product backlog may incorrectly treat team problems as product features and delay resolution.

1. Yes — One account can manage multiple subscriptions

1. No — You cannot merge two subscriptions into one

1. Yes — A resource belongs to only one subscription

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings