Free 300-815 Exam Braindumps

Refer to the exhibit.



In an active SIP call between phone user A and phone user B, phone A initiates a call transfer to phone user C. Which two scenarios are correct? (Choose two.)

  1. Phone_A sends a SIP-REFER message to the Cisco Unified Communications Manager with Phone_C information in the Refer-To section.
  2. Phone_B sends a SIP-REFER message to the Cisco Unified CM with Phone_C information in the Refer-To section.
  3. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_B User Hold MOH Audio Source settings.
  4. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the music on hold and the MOH audio is chosen from Phone_A Network Hold MOH Audio Source settings.
  5. As soon as Phone_A presses the Transfer button for the first time, Phone_B hears the MOH and the MOH audio is chosen from Phone_A User Hold MOH Audio Source settings.

Answer(s): A,D



A customer routes PSTN calls to ITSP through a SIP trunk on Cisco UCM that forwards and receives calls to and from ITSP. ITSP is set to send an E.164 number when the customer's extension is four digits. Which action should be taken to route the incoming calls to four-digit extensions?

  1. Configure a voice translation rule to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.
  2. Set the Significant Digits to 4 on the SIP trunk.
  3. Configure a voice translation profile to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.
  4. Set the Significant Digits to 8 on the SIP trunk.

Answer(s): B



Signal number reach call phone that not answered are leaving voicemails on the cell phone rather the corporate mailbox. Which two options will resolve this issue? (Choose two.)

  1. Check the Enable Extend and Connect checkbox
  2. Check the Enable Unified Mobility features checkbox
  3. Decrease the T302 timer
  4. Decrease the T301 timer Decrease the Answer Too Late timer

Answer(s): B,D



Refer to the exhibit.



An engineer is troubleshooting an issue where inbound Calls are failing after they transferred. The provider reports that update is not supported, and this is causing the calls to fail. Which command should resolve this issue?

  1. no midcall-signaling passthru
  2. no update-callerId
  3. no contact-passig
  4. rel1xx require “100rel”

Answer(s): D



ABC company has decided to implement hunt groups to help distribute calls between members. In order to implement this, administrator must configure hunt list, hunt group, and line groups on Cisco UCM. Which distribution algorithms should the administrator implement?

  1. Top Down, Round Robin, Broadcast
  2. Top Down, Circular, Broadcast
  3. Top Down, Round Robin, Distribute
  4. Sequantial, Circular, Broadcast

Answer(s): B