Cisco 300-820 Exam Prep
Implementing Cisco Collaboration Cloud and Edge Solutions (Page 13 )

• Have a definite, clear objective (C): Know exactly what you want to communicate. A clear purpose reduces ambiguity and irrelevant information.
• Plan the communication (E): Decide what to say, who needs the information, the appropriate channel and the best timing.
• Seek feedback (F): Check that the receiver understood the message. This could involve asking for confirmation or inviting questions.

• Ask questions (A): Usually associated with the receiver checking or clarifying information, although a sender may use questions in practice.
• Give feedback (B): Feedback is generally the receiver’s response to the sender’s message. The sender’s responsibility here is to seek feedback.
• Consider their contribution (D): This is not a standard sender-focused step in the communication process. The sender should consider the receiver’s needs and perspective, but the wording is less precise than the three recognised actions above.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or methods used to access organizational resources.

sql 
CREATE PROCEDURE dbo.usp_CreateOrder 
AS 
BEGIN 
    SET NOCOUNT ON; 
    SET XACT_ABORT ON; 


    BEGIN TRY 
        BEGIN TRANSACTION; 


        INSERT INTO dbo.Orders (/ columns /) 
        VALUES (/ values /); 


        SET @OrderID = SCOPE_IDENTITY(); 


        COMMIT TRANSACTION; 
    END TRY 
    BEGIN CATCH 
        IF @@TRANCOUNT > 0 
            ROLLBACK TRANSACTION; 


        THROW; 
    END CATCH; 
END;

• BEGIN TRY contains the transactional work.
• SCOPE_IDENTITY() retrieves the identity generated by the INSERT; it belongs after the insert, not as the error-handling logic.
• COMMIT runs only if all statements succeed.
• BEGIN CATCH handles failures.
• IF @@TRANCOUNT > 0 prevents attempting a rollback when no transaction is active.
• ROLLBACK undoes partial changes.
• THROW re-raises the original error with consistent details for the application.
• SET XACT_ABORT ON ensures many run-time errors automatically terminate and roll back the transaction.

• Digitally signing the software: Verifies authenticity and integrity. It does not hide how the software works.
• Limiting third-party libraries: May reduce dependencies and attack surface, but does not directly prevent reverse engineering.
• Using compile flags: Some compiler options can remove debugging information or optimize code, which may provide limited protection, but this is not the primary technique identified for preventing reverse engineering.

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• A — Securing information assets: This is the responsibility of management and operational/security teams.
• B — Validating protection: Correct. The auditor checks whether controls—such as access restrictions, encryption, retention, and handling procedures—match the asset’s classification.
• C — Ensuring alignment with regulations: Management and legal/compliance functions typically establish classification requirements; the auditor may assess compliance but does not primarily define alignment.
• D — Defining classification levels: This is a management responsibility based on business needs, risk, and regulatory obligations.

• The type of change: standard, normal, or emergency
• The risk, impact, and complexity
• The change model being used

• A standard change may be pre-authorized through its change model.
• A normal change may require assessment and approval by an appropriate change authority.
• An emergency change may be authorized by an emergency change authority, often using an expedited process.

• Change authorities are not only needed for emergency changes.
• They are not assigned only when a change is deployed.
• They are not only required for normal changes.

• AWS AppSync is designed for serverless applications that need to retrieve and combine data from multiple sources.
• A pipeline resolver can invoke multiple functions or data-source resolvers, including resolvers connected to different DynamoDB tables.
• The application can receive the combined result through one GraphQL request, without requiring custom aggregation logic in the application.
• This is operationally efficient because AppSync manages the API layer and resolver execution.

• Athena Federated Query is intended primarily for analytics and ad hoc querying, not low-latency application data retrieval.
• Querying DynamoDB through Athena can consume DynamoDB read capacity and may affect table performance.
• It also introduces analytical-query overhead and is not the normal choice for a microservice web application.

• A — Too infrequent: Formal strategies are often reviewed only every three to five years. This can make the organisation slow to respond to rapid changes in technology, competitors, regulation or customer needs.

• C — Relies on predicting the future: The approach assumes senior managers can make reasonably reliable forecasts and assumptions. In uncertain environments, these assumptions may quickly become invalid.

• E — Can restrict radical innovation: Formal planning tends to favour existing information, established objectives and incremental improvements. This may discourage experimental or highly innovative strategies that emerge from lower levels of the organisation.

• B concerns the difficulty of achieving competitive advantage through core competences when competing with focused specialists. It is not specifically a drawback of the formal top-down planning process.
• D is an activity organisations should undertake—continuous monitoring—not a drawback of the approach itself.

1. Identify the fact table

• Records something that happened, such as a sale, test, appointment, or measurement
• Contains foreign keys to other tables
• Contains measures or numeric results
• Has many rows

2. Identify a dimension table

• Describe people, products, dates, locations, or departments
• Contain descriptive columns
• Are referenced by the fact table
• Have fewer rows than the fact table

3. Identify the surrogate key

• System-generated
• Unique within the dimension
• Often named PatientKey, CustomerKey, or similar
• Usually an integer
• Not meaningful outside the model

• The selling division receives a credit based on a favourable transfer price, often market price or full cost plus a profit margin.
• The receiving division is charged a lower amount, such as marginal cost or another agreed price.
• The difference is accounted for centrally by head office or a corporate adjustment.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• Ease of exploitation
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and names a specific publicly known vulnerability; it does not measure severity.
• OSINT: Refers to intelligence gathered from publicly available sources.
• SOAR: Automates and coordinates security operations, such as alert response and playbooks.

• ARP poisoning: Redirects or intercepts local network traffic; monitoring would typically show suspicious ARP changes or man-in-the-middle behavior.
• Jamming: Interferes with wireless or radio signals. It would affect connectivity, not usually show a server-specific overload.
• Kerberoasting: Attempts to obtain and crack Kerberos service-account hashes; it does not normally cause a system outage.

• The S3 bucket as an origin for static content
• The Application Load Balancer (ALB) as an origin for dynamic content
• An Amazon Route 53 alias record pointing the application domain to CloudFront

Why this works

• Static data: CloudFront caches objects from S3 at edge locations, reducing latency for users worldwide.
• Dynamic data: CloudFront forwards requests that require application processing to the ALB. It can also maintain persistent connections and use the AWS global edge network to improve delivery performance.
• One domain: CloudFront behaviors can route different path patterns to different origins—for example, /static/* to S3 and other paths to the ALB.

Why the other options are incorrect

• Global Accelerator is designed primarily for accelerating traffic to applications with endpoints such as ALBs, not for caching S3 content.
• Using separate domains or splitting static and dynamic traffic adds unnecessary complexity.
• CloudFront already provides the required global edge distribution and caching, so combining it with Global Accelerator is unnecessary here.

• Encryption to preserve confidentiality
• Integrity protection to detect alteration
• Authentication of the server through certificates

• SHA-256: A hashing algorithm; it does not encrypt data for transmission.
• SSL 3.0: Obsolete and insecure. It should not be used.
• AES-256: A strong encryption algorithm, but by itself it does not provide the complete secure communication protocol needed for data in transit.

Question 3: AWS Storage Gateway File Gateway

• A: S3 bucket per user — S3 is object storage, not a traditional shared file system; mounting it requires extra tools and is less efficient.
• B: File Gateway — Provides a local file share using standard file protocols while storing files in Amazon S3. This preserves convenient local access and extends storage capacity.
• C: WorkSpaces and WorkDocs — Designed for virtual desktops and document collaboration, not large shared file storage.
• D: EC2 with EBS — EBS is attached to one EC2 instance and is not designed for direct multi-user file sharing.

1. Which host originated the infection

1. Which remaining hosts are infected

• Replaces the verbal message — this describes non-verbal communication being used instead of words.
• Substitutes for verbal communication — similar; it means communicating without speech.
• Confuses the verbal message — this occurs when non-verbal signals contradict or obscure the spoken message.

• Accept: Acknowledging the risk and choosing not to take additional action.
• Transfer: Shifting the risk or financial consequences to another party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or access restrictions.
• Avoid: Eliminating the activity that creates the risk.

• Internal hostnames and subdomains
• Network structure and naming conventions
• Servers and services
• Relationships between systems

• Determining ISP-assigned address space: Usually involves external registration and DNS information, not internal host discovery.
• Bypassing DNS sinkholing: Would require evidence that malicious DNS requests avoided redirection.
• Initial access: DNS queries alone do not show that the attacker gained access.
• Exfiltrating data: DNS tunneling can do this, but the snippet would typically show encoded or unusually long DNS queries.

• Transport and handling
• Storage and warehousing
• Refrigeration
• Shelf-stacking or replenishment
• Other costs directly attributable to product P

• Maintain head office control: Transfer pricing generally supports decentralisation rather than direct head-office control.
• Establish centralised decision making: This conflicts with divisional autonomy.
• Develop a top-down culture: Transfer pricing is intended to support empowered divisions and goal congruence, not impose purely top-down management.

• Suspended an operator who correctly refused to use unsafe equipment.
• Rewarded another operator for using the equipment despite the broken safety guard.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — This factory’s safety record is likely to be poor.

1. Create or verify cost groups

1. Set up the item model group

1. Create the costing version

1. Enter or calculate item costs

1. Activate the standard costs

• Accept: Acknowledging the risk without taking additional action.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity or condition that creates the risk.
• Transfer: Shifting the consequences—usually financial—to another party, such as an insurer.

• Open or insecure ports
• Enabled legacy or insecure protocols
• Known vulnerabilities and misconfigurations
• Weak services and outdated software

• curl tests web requests and HTTP-based services.
• Wireshark captures and analyzes network traffic; it does not normally scan servers for weaknesses.
• netcat can test connectivity to individual ports and sometimes grab service banners, but it is not a comprehensive vulnerability scanner.

• The servers are powered on.
• The network is functioning.
• Devices can still reach the server network.

• ARP poisoning: Redirects or intercepts local network traffic; it usually affects communication paths rather than overwhelming a service.
• Jamming: Disrupts wireless or radio signals. It would not fit a system that remains accessible from devices on the server network.
• Kerberoasting: Attempts to crack service-account credentials from Kerberos tickets; it does not normally cause an immediate outage.

• NIDS: Monitors network traffic for suspicious activity and network-based attacks targeting the application or its supporting services.
• HIPS: Protects an individual host by monitoring processes, files, and system activity. It can help secure the web server, but it is not focused specifically on the application’s network attack surface.
• SIEM: Aggregates and correlates logs; it does not directly prevent attacks.
• Honeypot: A decoy system, not the primary protection for a production web application.
• Certificate revocation list: Deals with certificate trust, not application exploitation.

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the primary control for switch-port MAC learning.
• NGFW: Protects at network boundaries but does not directly limit MAC addresses learned on access ports.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• Owner, Contributor, and Network Contributor provide sufficient management permissions.
• Reader can view Traffic Analytics data but cannot enable or configure it.

• Data loss prevention (DLP): Helps detect or prevent unauthorized data transfers, but does not directly protect data on a stolen, powered-off laptop.
• Operating system hardening: Reduces vulnerabilities and attack surface, but does not adequately protect stored data if the device is stolen.
• Boot security: Helps prevent unauthorized operating systems or boot media from loading. It supports device security but is not the primary solution for protecting the data itself.

• Accept: Acknowledge the risk and choose not to take additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or condition that creates the risk.

• The identified risk
• Its likelihood and potential impact
• The person or team responsible for handling it
• The response or treatment plan
• Risk thresholds, such as when escalation or action is required
• Current status and review dates

• Risk tolerance: The amount of risk an organization is willing to accept; it is a concept or limit, not usually the primary documentation.
• Risk transfer: Moving the responsibility or financial impact of a risk to another party, such as through insurance.
• Risk analysis: The process of evaluating risk likelihood and impact.

• B. Users accessing Salesforce from public Wi-Fi

• C. Users choosing the same password as their Facebook password

• A: 2FA does not protect an already-authenticated, unlocked session if someone accesses an unattended laptop.
• D: Weak password-reset questions are an account-recovery weakness. 2FA primarily strengthens login authentication, not necessarily the security-question reset process.

• Reviewing and validating generated code
• Checking security, licensing, and quality concerns
• Testing the implementation
• Making the final design and coding decisions

• A: Copilot is not a complete replacement for developers.
• C: Human input, review, and oversight are still required.
• D: Copilot Chat supports many tasks beyond debugging, including explanation, generation, refactoring, and testing assistance.

• A static IP gives the surveillance system a predictable local address, so users can reliably reach it on the LAN.
• However, a static IP does not block internet-based login attempts. If the router exposes the device through port forwarding, attackers could still reach it.
• Port mapping normally exposes an internal service externally, so A is a poor choice as written.
• Subnetting alone also does not block traffic; it would require routing/firewall rules.

• File1.png — Yes: User1 can apply Label1 with the Microsoft Purview Information Protection client. The client supports labeling image files such as .png in this scenario.

• Folder2 — No: Folder2 is the root folder. The client does not allow labeling the root folder itself. Although the client can label ordinary folders, selecting one applies the label to existing files and subfolders—not automatically to future files.

• File1.docx — Yes: .docx is a supported Microsoft Word file type, so User1 can apply Label1 to it.

• B. Deploy to a SageMaker endpoint: This is needed for SageMaker-hosted models, not for a model intended to be used directly in Amazon Bedrock.
• C. Register with SageMaker Model Registry: SageMaker Model Registry is unrelated to invoking custom models in Bedrock.
• D. Grant access in Bedrock: Access permissions may be necessary, but they do not replace the required provisioned capacity.

• Initial Intrusion: The compromised VPN account and stolen phishing credentials describe how the attacker first gained access, but that happened months earlier.
• Persistence: The scheduled tasks and recurring C2 connections show how the attacker maintained and automated continued access.
• Search and Exfiltration: This would involve locating and transferring data. The scenario does not primarily describe data discovery or theft.
• Cleanup: Cleanup involves removing evidence or covering tracks. Obfuscated scripts may make detection harder, but the main behavior here is maintaining access.

• Storage usage of files stored in Microsoft Teams: SharePoint site usage report

• Number of active users per team: Microsoft Teams usage report

1. SharePoint site usage report
2. Microsoft Teams usage report

• GPS coordinates
• Date and time the image was taken
• Camera or device information
• Image dimensions and software used

• Log data: Records generated by systems or applications, not normally embedded in image files.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification, not the specific type of information being extracted.

• Compare each server’s drive specifications and performance data.
• Identify the drive that is faulty, slow, or mismatched.
• Replace it with a drive that matches the required interface, capacity, and performance characteristics.
• Avoid selecting a slower drive, because storage performance can bottleneck the entire server.
• In a redundant array, use a compatible replacement so rebuilding does not create unnecessary performance degradation.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting responsibility or financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through controls.
• Avoid: Eliminating the activity or condition that creates the risk.

• SAML: Enables federated authentication and single sign-on between the IdP and SaaS providers.
• OAuth tokens: Allow delegated application access; OAuth is not primarily the first step for employee SSO.
• Password vaulting: Stores or autofills multiple passwords but does not eliminate the separate credentials or provide true federation.

• Discovers sensitive data in Amazon S3 buckets
• Uses machine learning and pattern matching to identify data such as personally identifiable information (PII)
• Helps assess S3 security and privacy risks
• Generates findings for potentially sensitive or exposed data

• Amazon Detective: Investigates security findings and performs root-cause analysis.
• Amazon GuardDuty: Detects threats and suspicious activity across AWS accounts and workloads.
• AWS IAM Access Analyzer: Identifies resources that are accessible from outside their intended trust zone, such as publicly accessible S3 buckets.

• A: Concerns task scheduling and avoiding missed runs, not directly sizing the warehouse.
• B: The amount of data in a stream alone does not reliably determine compute needs; the SQL processing is what matters.
• D: A multi-cluster warehouse addresses concurrency, not the compute size needed for one task execution.

text 
ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global 
ip route vrf Customer2 192.168.1.200 255.255.255.255 192.168.1.1 global 
ip route 192.168.1.0 255.255.255.0 Vlan10 
ip route 172.16.1.0 255.255.255.0 Vlan20

• The route in Customer1 VRF provides a path back to the Customer2 subnet, 172.16.1.0/24.
• The route in Customer2 VRF provides a path to the FTP server, 192.168.1.200.
• The keyword global tells the router to resolve the next hop using the global routing table, enabling controlled route leaking between the VRF and global table.
• The global routes identify the VLAN interfaces used to reach each customer network.

• Database data: Aggregates are used to retrieve structured data, commonly from entities and database sources.
• Screen scope: A Screen Aggregate belongs to the screen where it is defined and is not directly reusable as a screen-level aggregate elsewhere.
• Asynchronous and parallel execution: Multiple Screen Aggregates can run asynchronously and in parallel, helping the screen load data efficiently.