Cisco®
CompTIA
Checkpoint
ISC
EC-Council
EXIN
Fortinet
ITIL®
Juniper
PMI
Microsoft
VMware
Avaya
Google
Salesforce
Amazon
Palo Alto Networks
ISC2
Splunk®
Scrum
All Vendors
  2. Home
  3. Exams
  4. Cisco®
  5. 350-401

Free 350-401 Exam Braindumps (page: 16)

Page 15 of 268
PDF with 1067 Questions

Refer to the exhibit.
Router1 is currently operating as the HSRP primary with a priority of 110. Router1 fails and Router2 takes over the forwarding role.
Which command on Router1 causes it to take over the forwarding role when it returns to service?

  1. standby 2 priority
  2. standby 2 preempt
  3. standby 2 track
  4. standby 2 timers

Answer(s): B


Reference:

https://www.cisco.com/c/en/us/support/docs/ip/hot-standby-router-protocol-hsrp/13780-6.html



An engineer has deployed a single Cisco 5520 WLC with a management IP address of 172 16.50.5/24. The engineer must register 50 new Cisco AIR-CAP2802I
E-K9 access points to the WLC using DHCP option 43. The access points are connected to a switch in VLAN 100 that uses the 172.16.100.0/24 subnet. The engineer has configured the DHCP scope on the switch as follows:
Network 172.16.100.0 255.255.255.0
Default Router 172.16.100.1
Option 43 ASCII 172.16.50.5
The access points are failing to join the wireless LAN controller.
Which action resolves the issue?

  1. configure option 43 Hex F104.AC10.3205
  2. configure option 43 Hex F104.CA10.3205
  3. configure dns-server 172.16.50.5
  4. configure dns-server 172. 16.100.1

Answer(s): A


Reference:

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp-option-43-00.html



What is the role of vSmart in a Cisco SD-WAN environment?

  1. to establish secure control plane connections
  2. to monitor, configure, and maintain SD-WAN devices
  3. to provide secure data plane connectivity over WAN links
  4. to perform initial authentication of devices

Answer(s): A


Reference:

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/sdwan-xe-gs-book/system-overview.html



Which action is performed by Link Management Protocol in a Cisco StackWise Virtual domain?

  1. It determines which switch becomes active or standby.
  2. It determines if the hardware is compatible to form the StackWise Virtual domain.
  3. It rejects any unidirectional link traffic forwarding.
  4. It discovers the StackWise domain and brings up SVL interfaces.

Answer(s): C






Post your Comments and Discuss Cisco® 350-401 exam with other Community members:

Exam Discussions & Posts