Lafayette Productions is looking for a new ISP that has improved availability, load balancing, and catastrophe protection. Which type of ISP connectivity solution would be best?

Single run
Multi-homed
Stub domain EBGP
Direct BGP peering

Answer(s): B

Show Answer Next Question

QUESTION: 2

Net Flow provides valuable information about network users and applications, peak usage times, and traffic routing. Which function is of Net Flow?

Monitor configuration changes
Monitor CPU utilization
Monitor link utilization
Generate traps for failure conditions

Answer(s): C

Show Answer Next Question

The P4S company is deploying OSPF on a point-to-multipoint Frame Relay network. The remote sites needn??t to communicate with each other and there are a relatively small number of sites (scaling is not a concern). How to configure OSPF for this topology in order to minimize the additional routing information injected into the network and keep the configuration size and complexity to a minimum?

Configure the link as OSPF no broadcast and manually configure each of the remote sites as a neighbor.
Configure the link as OSPF broadcast and configure the hub router to always be the designated router.
Configure the link as OSPF broadcast and configure a mesh group towards the remote routers.
Configure the link at the hub router as OSPF point-to-multipoint and at the remote routers asOSPF point-to-point.

Answer(s): B

Show Answer Next Question

QUESTION: 4

What is high availability?

Redundant infrastructure
Clustering of computer systems
Reduced MTBF
Continuous operation of computing systems

Answer(s): D

Show Answer Next Question

QUESTION: 5

What is the way that an OSPF ABR uses to prevent summary route information from beingreadvertised from an area into the network core (Area 0)?

It advertises only inter-area summaries to the backbone.
It uses poison reverse and split horizon.
It only sends locally originated summaries to the backbone.
It compares the area number on the summary LSA to the local area.

Answer(s): C

Show Answer Next Question

Download PDF Next Page

Viewing page 2 of 49
Viewing questions 6 - 10 out of 234 questions

Post your Comments and Discuss Cisco 351-001 exam prep with other Community members:

Comments:

Name:

351-001 Exam Discussions & Posts (Share your experience with others)

AI Explanation - verified by User1805 on: June 12, 2026
Question 18:
Question 18 asks which element starts a flow.

Correct answer: A — Trigger.

Why:

In Flow Designer, a flow is initiated by a Trigger. The Trigger defines the event that starts the flow (e.g., a record is created/updated, an API call is received).

Core Action items are the steps executed inside the flow, not what starts it.

A spoke is part of IntegrationHub used to connect to external systems—not the flow’s starting point.

An Event may relate to automation concepts, but in Flow Designer the canonical starting point is the Trigger.

Bottom line: the flow begins with a Trigger; the other options describe elements used during the flow, not to initiate it.
Kochi, India

AI Explanation - verified by User7487 on: June 12, 2026
Question 36:

Answer: C. AWS IAM Access Analyzer

Why:

AWS IAM Access Analyzer analyzes your IAM and resource-based policies to find resources that can be accessed by external principals (outside your account).

It can identify if an S3 bucket or an IAM role is shared with external entities and surfaces findings so you can tighten access if needed.

The other options aren’t designed for this specific visibility:

- AWS Service Catalog: catalogs and provisions IT services. - AWS Systems Manager: manage and automate operational tasks. - AWS Organizations: governance across multiple AWS accounts.
Tip: If Access Analyzer finds external access, you can review and modify the policies to enforce least privilege.
New Delhi, India

AI Explanation - verified by User1830 on: June 12, 2026
Question 12:
Correct answer: B) AWS Service Catalog
Explanation:

AWS Service Catalog lets you create and manage a catalog of IT services and resources that are approved for use. This provides governance over what can be deployed, including Infrastructure as Code (IaC) templates like CloudFormation stacks.

It enforces access controls, approvals, and standardization, so deployed IT services follow your internal policies.

Why others aren’t correct:

- AWS Resource Explorer helps discover resources, not govern IaC templates. - AWS Organizations handles account structure and policies across accounts, not IaC governance. - AWS Systems Manager offers automation and management of resources, but not the centralized governance of IaC templates in a catalog.
Mumbai, India

AI Explanation - verified by User9263 on: June 12, 2026
Question 82:

Answer: D (admin/admin)

Why: For R82 and newer Gaia platforms, the default login credentials used by Check Point appliances are typically admin/admin. Older materials and some practice questions may reference admin/Chkp1234, but current R80+ / R82 documentation and SK71000-style references point to admin/admin as the default. Always change the credentials during initial setup. If you want, I can walk you through changing the admin password on Gaia/SmartConsole for R82.

Lisbon, Portugal

AI Explanation - verified by User8710 on: June 12, 2026
Question 59:
Prawidlowa odpowiedz: B, C, D
Dlaczego to prawidlowe:

Local database — uwierzytelnianie przez wbudowana baze uzytkowników w ServiceNow.

LDAP — uwierzytelnianie against zewnetrznego katalogu LDAP.

SSO — single sign-on (np. SAML/OIDC) z Identity Provider.

Dlaczego inne odpowiedzi sa nieprawidlowe:

A: XML feed — to raczej sposób importu danych, a nie metoda uwierzytelniania.

E: FTP authentication — nie jest standardowa metoda logowania w ServiceNow.

Przyklad: uzytkownik loguje sie przez LDAP do swojej organizacyjnej domeny, lub przez SSO z IDP; te metody sa powszechnie uzywane w srodowiskach korporacyjnych.
Warsaw, Poland

AI Explanation - verified by martinivanov77 on: June 12, 2026
the answer should be B
You're right to question it. The correct answer is B.
Why:

With a contract dispute about closure and incomplete records, the PM should bring together the project team, sponsor, and client to decide what additional work is needed to close and to document it (often in lessons learned). This aligns with formal closure + stakeholder alignment.

A (seek legal advice) is not the immediate step; it’s a potential escalation if no agreement can be reached.

C (close and hand over) is inappropriate while the client disputes closure.

D (lessons learned workshop) is useful later but doesn’t resolve the immediate closure issue.

In short: hold a meeting with the project team, sponsor, and client to agree on the remaining work to close and capture it in lessons learned.
Stara Zagora, Bulgaria

AI Explanation - verified by User9181 on: June 12, 2026
Question 1:
Answer: Install the additional PTA agent on Server4 (Unassigned member server).
Why:

PTA agents must run on domain-joined servers that are NOT domain controllers. Servers 1 and 2 are DCs, so they are not suitable.

Server3 is the existing Azure AD Connect server. You could install PTA on a DC-less server for HA, but best practice is to place the additional PTA agent on a separate non-DC member server (Server4) to avoid coupling AAD Connect with PTA.

So, Server4 is the correct choice to provide high availability for PTA.
Note: If your answer key currently shows Server1, that is incorrect based on the recommended guidance. If you want, I can walk through the exact installation steps on Server4.
Vadodara, India

AI Explanation - verified by User8710 on: June 12, 2026
explain in PL
Pytanie 42 brzmi: „Która grupa uprawnien sluzy do kontrolowania dostepu do Aplikacji i Modulów?”

Prawidlowa odpowiedz: Roles (Opcja C)

Dlaczego:

Role to grupa uprawnien przypisana uzytkownikowi, która okresla, jakie aplikacje i moduly sa widoczne w Nawigatorze Aplikacji.

Access Control Rules (ACL) kontroluja dostep do danych w tabelach/rekordach, a nie widocznosc modulów.

UI Policies kontroluja zachowanie formularzy i prezentacje interfejsu, nie uprawnienia dostepu.

Assignment Rules automatycznie przypisuja zadania, a nie kontroluja dostepu.

Czyli to rola uzytkownika decyduje o widocznosci aplikacji/modulów.
Warsaw, Poland

AI Explanation - verified by User9181 on: June 12, 2026
Question 21:
Here’s a focused way to understand Question 21.

What the question tests:

- Azure AD device settings (how many devices a user can join). - Built-in device-management RBAC (Cloud device administrator). - Whether a local admin is present on devices (requires device info).

Box 1: “Users may join 5 devices to Azure AD.”

- Explanation: In Azure AD, Device settings include a “Users may join devices to Azure AD” limit. If the tenant is configured for a limit of 5, then a user with 5 joined devices is within the limit. So this is typically Yes.

Box 2: “Cloud device administrator can enable, disable, and delete devices in Azure AD and read Windows 10 BitLocker keys in the Azure portal.”

- Explanation: The built-in role Cloud device administrator allows managing devices (enable/disable/delete) and access to BitLocker keys in the Azure portal. It does not grant unrelated device properties. So this is typically Yes (the statement is true). If the answer key marks it No, that is likely an error in the key.

Box 3: “An additional local device administrator has not been applied.”

- Explanation: This depends on actual device provisioning. Azure AD/device settings don’t specify local Windows admin accounts. You’d need to check each device’s local groups. It can be Yes or No depending on the devices, so you can’t determine from the Azure AD info alone.

Quick check steps:

- Inspect Device settings for the join limit. - Review the Cloud device administrator role in Azure AD roles. - On devices, verify local admin accounts if needed.
If you want, I can walk through the e
Vadodara, India

AI Explanation - verified by User6367 on: June 12, 2026
Question 31:
The correct choice is a table projection.

Why: When you want to analyze data in Power BI, you need a tabular (rows/columns) representation. In a Cognitive Search knowledge store, projections shape how content is stored and exposed. A table projection creates a schema of columns/rows from the enrichment output, which is ideal for BI tools.

Contrast with other options:

- Object projection would put the entire enrichment result into one JSON document, which isn’t convenient for Power BI. - File projection is for storing binary files, not tabular data. - Projection group isn’t needed here.

Quick note: Form Recognizer outputs structured JSON; using a table projection (with optional shaping) maps that data into a grid suitable for analysis without extra development. If you want, I can outline steps to configure the table projection and connect to Power BI.

West Linn, United States

AI Explanation - verified by kuhrjudith on: June 12, 2026
Question 214:
Question 214 asks: What should be the FIRST step to ensure an information security program meets the requirements of new regulations?

Answer: B — Integrate compliance into the risk management process.

Why this is correct:

The risk management process is the core framework for prioritizing and addressing security-related issues, including regulatory obligations. By integrating compliance into risk management, regulatory requirements become part of risk assessment, risk appetite, and treatment plans. This ensures regulatory needs are considered alongside other risks and funded appropriately from the outset.

Why the other options are less appropriate as the first step:

A. Validate the asset classification schema: Important for data handling, but not the immediate entry point for regulatory compliance when new rules appear.

C. Assess organizational security controls: Necessary after regulatory requirements are identified, but not the first step; you need to know what to assess.

D. Conduct a gap analysis to determine necessary changes: Helpful for remediation, but again, you typically start by embedding compliance into risk management to guide what gaps to evaluate.

Key concept: Treat regulatory requirements as part of the organization’s risk landscape and embed them into the risk management process to guide prioritization and resource allocation.
Krummhörn, Germany

AI Explanation - verified by User8707 on: June 11, 2026
Question 2:
The correct answer is Risk register.

Why this is correct: A risk register is the formal document used to list risks, assign responsible parties (owners), and define thresholds or criteria for when risk treatment actions should be taken. It’s the central artifact for tracking risk ownership and action plans.

Why the others are not correct:

- Risk tolerance: reflects the organization’s overall appetite for risk, not a ledger of risks or owners. - Risk transfer: is a treatment option (e.g., insurance) that shifts financial impact, not a documentation artifact. - Risk analysis: assesses likelihood and impact, but doesn’t establish ownership or formal thresholds in a register.
Typical contents of a risk register include risk ID, description, likelihood, impact, risk owner, risk score, thresholds for action, and planned mitigations. This aligns with risk-management practices covered by the exam.
Jacksonville, United States

AI Explanation - verified by User8928 on: June 11, 2026
Question 4:
Question 4 asks whether SaaS is the right cloud deployment model for deploying Azure VMs.

Correct answer: No (B). For deploying virtual machines, you should use IaaS (Infrastructure as a Service), not SaaS.

Why SaaS is incorrect: SaaS provides software applications managed by the vendor. You don’t get control over virtual machines, OS, or patching.

Why IaaS is correct: IaaS gives you virtual machines and the ability to manage the OS, updates, and installed software—typical with Azure Virtual Machines and related IaaS services.

How PaaS fits: PaaS abstracts the OS and infrastructure further (e.g., Azure App Service) and is used for hosting apps, not for full VM deployment.

So, the solution stating SaaS for deploying VMs does not meet the goal; the right approach is IaaS.
Hyderabad, India

Ayanda AJ on: June 11, 2026
Yes it is help fullbut some answer explaination sometimes conflicts with the answer choice
Johannesburg, South Africa

AI Explanation - verified by User1205 on: June 11, 2026
Question 12:
Question 12 explanation:

Correct answer: Yes (A).

Why: Migrating VMs to Azure under a pay-as-you-go subscription uses an operational expenditure (OpEx) model. Pay-as-you-go is cloud-based billing (ongoing usage costs), not a one-time capital purchase.

Why not CapEx: CapEx would involve upfront hardware purchases or large capital investments. In Azure, you don’t own the hardware; you pay for use, which is OpEx.

Key concept: Cloud economics favor OpEx/pay-as-you-go for scalable, per-usage charges rather than upfront capital expenditure.

Thembisa, South Africa

AI Explanation - verified by singh_y2k on: June 11, 2026
Question 26:

Answer: No. The solution does not meet the goal.

Why:

Azure Information Protection (AIP) is for protecting documents and emails (data at rest/in transit) using encryption/rights management. It is not a secrets or credential management tool.

To protect administrative credentials during automated deployment, you should use a secrets management service such as Azure Key Vault. Store credentials as secrets, and have your deployment automation retrieve them securely at runtime (e.g., via a Managed Identity or a service principal with least-privilege access).

Benefits of Key Vault approach: prevents hard-coding secrets in scripts, enables rotation, and provides auditing/monitoring of access.

How you’d implement (high level):

Create a Azure Key Vault and store admin credentials as secrets.

Assign a managed identity to your deployment tooling (or use a service principal) with access to the needed secrets.

Update deployment scripts to fetch credentials from Key Vault at deployment time.

Rotate credentials regularly and monitor access via Azure activity logs.

So, the correct choice is B: Azure Information Protection isn’t the right tool for encrypting credentials in deployment. Use Azure Key Vault (with managed identities) instead.
Kuala Lumpur, Malaysia

Tadas on: June 11, 2026
Veryfying doubtfull answers.
Vilnius, Lithuania

AI Explanation - verified by singh_y2k on: June 11, 2026
Question 17:

Answer: No

Why: Management groups are for governance: organizing subscriptions and applying policies/RBAC across many subscriptions. They do not provision resources automatically.

What to use instead (or with management groups):

- ARM templates to define the exact resources and deploy them automatically. - Azure Blueprints to package ARM templates, policies, and RBAC into a repeatable deployment across subscriptions.

How they fit together: you can apply bluesprints at the management group level so every subscription within the group gets the same standard resources and policies automatically.

Kuala Lumpur, Malaysia

AI Explanation - verified by singh_y2k on: June 11, 2026
Question 10:

Answer: No.

Why:

- The scenario describes migrating VMs to an Azure pay-as-you-go subscription. This is an example of an operational expenditure (Opex) model, because you pay for resources as you use them. - The term “elastic expenditure model” is not a standard Azure cost model. Elasticity is a scalability characteristic (adjusting resources up/down), not a recognized expenditure category. The exam material is likely testing knowledge of Opex vs Capex, not elasticity. - Therefore recommending the “elastic expenditure model” does not meet the goal; the correct approach is to use an Opex/pay-as-you-go model (with options like reserved instances later for optimization).
Kuala Lumpur, Malaysia

AI Explanation - verified by User1618 on: June 11, 2026
Question 17:

Short answer: No. The solution does not meet the goal.

Why: management groups are a governance construct used to organize subscriptions and apply policies/RBAC across them. They do not by themselves deploy or create resources.

What you should use to achieve automatic provisioning:

- ARM templates (or Azure Resource Manager templates) to define the identical resources once and deploy them consistently. - Or Azure Blueprints to define a standard set of resources, policies, and role assignments that can be assigned across subscriptions.

How they fit together:

- Use a management group to scope the deployment (so all relevant subscriptions get the same blueprint or template). - Use the template/blueprint to actually create the resources automatically.

Key terms:

- management groups: governance scope across subscriptions - ARM templates: declarative resource deployment - Azure Blueprints: reusable collection of resources, policies, and RBAC across subscriptions
Boydton, United States

AI Explanation - verified by User1618 on: June 11, 2026
Question 7:

Answer: A — Standard

Why:

- Free and Shared are not suitable because they use shared compute; the requirement calls for dedicated compute per app. - The tier must support custom domains (all paid tiers do, but Free/Shared are not appropriate for this scenario). - Storage: 10 apps × 10 GB each implies substantial storage. Standard provides more robust storage capacity than the lower tiers. - Load balancing between instances is required, and Standard includes built-in load balancing with options like auto-scaling. - Cost: Standard is the cheapest tier that delivers the needed features (dedicated compute, custom domains, sufficient storage, and load balancing) without moving to Premium.

Caveat:

- If you truly need dedicated compute per app, you may need separate App Service Plans for each app, which increases cost. The question asks for the tier, but per-app isolation depends on using separate plans, not just the tier itself.
Boydton, United States

AI Explanation - verified by User1618 on: June 11, 2026
Question 3:

Answer: No (B)

Why:

- The task is to get an assessment of an Azure environment’s design from Microsoft. That capability is provided by the Premier support plan. - The company currently has the Basic plan, which does not include this assessment. - The requirement also says to keep expenses to a minimum. Premier is the most expensive option, and there isn’t a cheaper plan that includes an architecture/design assessment. So while Premier enables the feature, it does not meet the goal of minimizing cost.

Therefore, the solution does not satisfy the goal.

Boydton, United States

AI Explanation - verified by prasadraj80 on: June 11, 2026
Question 1:
Here’s why Question 1’s correct choices are B and E.

Goal: Make traffic between Vnet2 and Vnet3 pass through Vnet1 (hub) so it uses the Boston ExpressRoute gateway and meets latency and routing requirements.

Why E (On the peerings from Vnet2 and Vnet3, select Use the remote virtual network's gateway or Route Server): This makes Vnet2 and Vnet3 route their internet/ WAN traffic through Vnet1’s gateway. It’s the core step to funnel traffic via the hub’s gateway.

Why B (On the peerings from Vnet2 and Vnet3, select Allow for Traffic forwarded from remote virtual network): This enables transitive routing, allowing traffic that’s being forwarded by the remote network (Vnet1) to reach the other remote network (Vnet3 or Vnet2). It’s required for VNet2?VNet3 traffic to be forwarded through Vnet1.

Why the other options aren’t correct for this goal:

A and D configure forwarding/gateway settings on the Vnet1 side, which isn’t what enables the Vnet2?Vnet3 path via Vnet1.

C attempts to use the remote gateway from the Vnet1 perspective, which isn’t the needed direction for this hub-and-spoke setup.

In short: enable gateway transit via the hub and allow forwarded traffic on the spoke–spoke paths (B and E).
Bengaluru, India

AI Explanation - verified by User8926 on: June 11, 2026
Question 6:
Answer: C
Explanation by requirement mapping:

Large initial load (2M Accounts, 5.5M Contacts, 4.3M Opportunities, 45k Products): use Bulk API for high-volume, asynchronous data loads (preferred over SOAP/REST for big batches).

Notify external systems of new/updated Accounts/Contacts: use Streaming API to publish events in real time to external systems.

Expose custom business logic to 5 external apps securely: use Apex REST API to create secure REST endpoints (easily protected with OAuth/Named Credentials).

Schedule nightly dataflows/recipes/data syncs: use Analytics REST API to manage Einstein Analytics dataflows/Recipes and scheduling.

Why the other options are less suitable:

A and B lack the Streaming API for real-time notifications.

D uses Apex SOAP API instead of REST; REST is generally preferred for new integrations and easier to secure and manage.

So the combination in C best fits all four requirements.
Sofia, Bulgaria

AI Explanation - verified by User8926 on: June 11, 2026
Question 3:
Question 3 is about real-time UI updates for a dashboard component showing closed Cases.

Platform Event (C) — This is the best choice. Platform Events are designed for pub/sub, real-time updates inside Salesforce. A Lightning component can subscribe to the event (e.g., via the empApi) and refresh the count as soon as a Case is closed.

Push Topic (A) — Primarily for external systems to subscribe to Salesforce data changes. It’s not the ideal pattern for updating an internal Salesforce UI component.

Change Data Capture (B) — Used to notify external systems about data changes. It can feed external dashboards, but it isn’t the most straightforward way to drive an in-Salesforce UI in real time.

Generic Event (D) — Not a standard or recommended pattern for this use case.

In short, Platform Events (C) are designed for real-time, internal UI updates, making them the most appropriate choice. If you want, I can outline how to implement a simple Platform Event and Lightning component subscription.
Sofia, Bulgaria

AI Explanation - verified by namitaverma19 on: June 11, 2026
Question 174:

Answer: B AWS Artifact

Explanation:

- AWS Artifact is the AWS service that provides on-demand access to AWS compliance reports and attestations (e.g., SOC 1/2, PCI DSS, ISO 27001). You can view or download these reports as needed. - Why not the others? - AWS Secrets Manager stores and rotates secrets; not for compliance reports. - AWS Security Hub aggregates and prioritizes security findings, not on-demand compliance documents. - AWS Certificate Manager manages SSL/TLS certificates; not for compliance reports.
Tip: “Retrieve compliance reports on demand” is a classic cue to choose Artifact.
Delhi, India

AI Explanation - verified by namitaverma19 on: June 11, 2026
Question 162:
Q162 asks: For a continuously running application on EC2 for 1 year, which purchasing option is MOST cost-effective?

Correct answer: A. Reserved Instances

Why:

For steady, 24/7 workloads, Reserved Instances (1-year term) provide a substantial discount over On-Demand pricing.

Spot Instances are unreliable for continuous workloads due to possible interruptions.

On-Demand Instances are flexible but cost more over a long, fixed period.

Dedicated Hosts are typically more expensive and unnecessary unless you have licensing/compliance needs.

Note: Savings Plans can also reduce costs with flexibility across instance families, but for a fixed 1-year continuous workload, a Standard Reserved Instance is the typical best-fit option.
Delhi, India

AI Explanation - verified by kuhrjudith on: June 11, 2026
Question 169:
Question 169 asks what a information security governance framework should most rely on understanding when being established.

The exam key shows: A) the regulatory environment.

Why A can be considered most important: Regulations and legal/compliance requirements create mandatory controls, reporting, and risk implications that shape the structure and priorities of the governance framework. You must understand the external constraints the organization must meet.

Why this can be debated: Other factors are also critical to success:

- C) corporate culture influences acceptance and enforcement of governance. - D) risk management techniques are central to defining risk appetite, controls, and oversight. - B) information security best practices provide guidance but are not a substitute for understanding laws and business context.
In ISACA governance terms, you’re aligning security with business objectives and regulatory demands; however, real-world success also hinges on culture and risk management. If you want, I can map how each option aligns with ISACA governance objectives.
Krummhörn, Germany

AI Explanation - verified by User2276 on: June 11, 2026
Question 13:
For Question 13, the two likely reasons you see different values when clicking a report from a dashboard are:

The dashboard needs to be refreshed. Dashboards often show cached data. If underlying data has changed since the last refresh, the dashboard numbers can be out of date. Refreshing the dashboard pulls in the latest results from the underlying reports.

The running dashboard user and viewer have different permissions. A dashboard can be configured to run as a specific user (the running user). That user’s data access/sharing rules determine what data is shown on the dashboard. If the viewer has different permissions, the detailed report results opened from the dashboard can differ from what appears on the dashboard.

Why the other options aren’t the best fits here:

“The report needs to be refreshed” is not the typical cause, since the dashboard’s refresh is what updates the data the report is built on.

“The current user does not have access to the report folder” would usually prevent opening the report rather than explain a value discrepancy between the dashboard and the report.

Bengaluru, India

AI Explanation - verified by User2955 on: June 10, 2026
Question 26:
Question 26 asks which statements about Virtual Warehouses are true. The given key lists A and B, but C and D are also true.

A) Customers can change the size of the Warehouse after creation — True. You can resize a warehouse with commands like ALTER WAREHOUSE <name> SET WAREHOUSE_SIZE = '<size>' (or adjust it in the UI).

B) A Warehouse can be resized while running — True. You can resize a warehouse while it’s active; the system reallocate compute resources accordingly (queries may experience temporary adjustments, but no need to suspend first).

C) A Warehouse can be configured to suspend after a period of inactivity — True. This is the AUTO_SUSPEND setting (e.g., AUTO_SUSPEND = 300 seconds).

D) A Warehouse can be configured to auto-resume when new queries are submitted — True. This is the AUTO_RESUME setting (e.g., AUTO_RESUME = TRUE).

Conclusion: All four statements are true. The exam key showing only A and B is incomplete/incorrect.
If you want, I can show exact SQL syntax or UI steps for setting each option.
London, United Kingdom

AI Explanation - verified by User8765 on: June 10, 2026
Question 49:
Question 49 asks what “Done” means for a Development Team delivering a Sprint Increment. The two correct statements are:

C: No work left from the definition of "Done."

- Why: The Increment must meet the team’s Definition of Done (DoD); there should be no remaining work to satisfy the DoD for the items in the Increment.

E: All work to create software that is ready to be released to end users.

- Why: A done Increment is potentially releasable and ready for end users if the DoD is met.
Why the others are not correct:

A: “All work the Development Team is willing to do” is not what defines Done; Done is defined by the DoD, not willingness.

B: “Ready for integration” is only one aspect and may be part of the DoD, but it doesn’t capture the full meaning of Done being potentially releasable.

D: “Whatever the Product Owner defines as quality” is incorrect because the DoD is a shared Scrum Team concept, not solely defined by the Product Owner.

Key concepts:

Definition of Done sets the criteria the Increment must meet.

A Done Increment is potentially releasable to end users.

Algiers, Algeria

El on: June 10, 2026
Good way to review what you have learnt and what areas you need to improve in.
Camberwell, United Kingdom

AI Explanation - verified by User3624 on: June 10, 2026
Question 20:

Answer: The provided key shows A, but the correct command is B: terraform init.

Why: When you configure a new backend in your Terraform code, you reinitialize Terraform with the new backend. Running terraform init initializes the backend and, if there is existing state, will migrate it to the new backend. The other commands do not perform backend migration:

- terraform destroy would destroy resources. - terraform apply applies changes, but does not migrate state by itself. - terraform push is not a valid command for modern Terraform backends.

Practical note: In many cases, terraform init will prompt you to migrate the state to the new backend; in other versions you may need to use optional flags like -migrate-state. After migration, you can run terraform plan and terraform apply as usual.

Sparta, United States

AI Explanation - verified by User2708 on: June 10, 2026
Question 39:
Answer: B.
Explanation: Amazon SageMaker Clarify provides model explainability and transparency by generating metrics, reports, and example explanations that show how the foundation model makes decisions. This supports regulatory requirements for interpretability. The other options don’t directly address explainability:

Amazon Inspector focuses on security/compliance assessments of infrastructure.

Amazon Macie protects data and detects sensitive data, not model transparency.

“Gather more data” is not a tool for explainability, and Rekognition with custom labels adds labels rather than explaining model decisions.

Pune, India

AI Explanation - verified by madhavi.chilla09 on: June 10, 2026
Question 114:
Question 114 asks you to judge three statements about whether the given Sales model can support three analyses. Since the exact statements aren’t shown here, I’ll outline the typical approach and how to verify each point.

Data model setup needed

- Have a Date dimension (calendar table) related to Sales via the order date (e.g., Sales[OrderDate] ? Date[Date]). - Have a Product dimension related to Sales via ProductID (or a similar key). - Use measures that reflect the requested metrics.

Measures to support the analyses

- Total sales by product by month: - TotalSales := SUM(Sales[TotalAmount]) - Visuals slice by Product and Date[Month] (or Date[MonthName]). - Quantities sold by product by day: - QuantitySold := SUM(Sales[Quantity]) - Visuals slice by Product and Date[Day] (or Date[Date]). - Number of sales transactions by quarter: - TransactionCount := DISTINCTCOUNT(Sales[OrderID]) (or COUNTROWS(Sales) if each row is a separate transaction) - Use Date[Quarter] for the axis.

Key idea

- A proper Date dimension and correct relationships are essential to enable month/day/quarter granularity. If the sta
Hyderabad, India

AI Explanation - verified by m.dasharatham on: June 10, 2026
Question 104:
For question Q104, you should select:

Box 1: Field security profile

- Rationale: Use field-level security to control access to sensitive fields like an employee’s employment status. This ensures only designated roles (e.g., the HR manager) can edit that field.

Box 2: Compliance policy (Intune) with Conditional Access

- Rationale: Use device compliance policies to enforce only approved device types can access the solution and data. When combined with Conditional Access, it blocks access from noncompliant or unapproved devices.
Hyderabad, India

AI Explanation - verified by madhavi.chilla09 on: June 10, 2026
Question 104:
Here’s a targeted explanation for Question 104.
What the question asks

You want to reduce the data model size while still being able to analyze product sales by month and quarter.

You have two tables (likely Products and Sales) with a one-to-many relationship, and Auto Date/Time is enabled.

Why the listed correct choices (A and C) make sense

A. Create a relationship between the Date table and the Sales table.

- Why: To enable time-based analysis using a dedicated date dimension. The fact table (Sales) can be filtered by the Date table, letting you slice by month/quarter accurately.

C. Create a Date table and select Mark as Date Table.

- Why: A proper Date (calendar) table is the standard basis for time intelligence. Marking it as a Date Table ensures DAX time-intelligence functions work correctly and consistently for month and quarter analysis.
Why the other options are not selected

B. Disable the auto date/time option.

- This would reduce model size, but the question asks for two actions; the chosen two focus on establishing a proper calendar and its relationship.

D. Disable the load on the Date table.

- If you disable loading the Date table, you cannot analyze by date at all.

E. Remove the relationship between the Product table and the Sales table.

- This would break the existing model’s ability to analyze by product.
Practical note

In practice, you’d typically both disable Auto Date/Time (to shrink the model) and use a dedicated Date table related to the fact table, enabling proper month/quarter analysis. The exam’s t
Hyderabad, India

AI Explanation - verified by madhavi.chilla09 on: June 10, 2026
Question 80:
Question 80 asks whether the solution of adding inactive relationships between the sales fact table and the date table for each date foreign key (Due Date, Order Date, Delivery Date) meets the goal of analyzing sales over time based on all date keys.
Short answer: No.
Why:

Power BI supports one active relationship between a fact table and a dimension table. If you make all three relationships inactive, there’s no active path for filtering by any date key unless you explicitly switch relationships in DAX.

The typical pattern to analyze by multiple date keys is:

- Create one active relationship (e.g., Sales.OrderDateKey -> Date[Date]). - Create inactive relationships for the other date keys (Sales.DueDateKey -> Date[Date], Sales.DeliveryDateKey -> Date[Date]). - Use DAX with USERELATIONSHIP to activate the desired relationship in measures (e.g., totals by Due Date or Delivery Date).
Example measures:

TotalSales = SUM(Sales[Amount]) // uses the active OrderDate relationship

TotalSalesByDueDate = CALCULATE(SUM(Sales[Amount]), USERELATIONSHIP(Sales[DueDateKey], Date[Date]))

TotalSalesByDeliveryDate = CALCULATE(SUM(Sales[Amount]), USERELATIONSHIP(Sales[DeliveryDateKey], Date[Date]))

So, simply making all relationships inactive does not meet the goal; you need one active relationship and use USERELATIONSHIP for the others.
Hyderabad, India

AI Explanation - verified by madhavi.chilla09 on: June 10, 2026
Question 75:
Question 75 asks how to meet the need for daily impression counts by campaign and site_name for the last year while keeping the data model small. The two best actions are:

A. Create one-to-many relationships between the tables.

- Why: Proper relationships between the fact (impressions) and dimension tables (campaign, site, date) ensure correct cross-filtering and accurate totals in visuals.

B. Group the Impressions query in Power Query by Ad_id, Site_name, and Impression_date. Aggregate by using CountRows.

- Why: Pre-aggregating the large Impressions data reduces model size (fewer rows) and gives you a compact fact with the necessary granularity (day, campaign, site) for last-year analytics. You can then use a simple COUNTROWS to get the counts.
Why not C or D:

C (calculated table of Ad_id, Site_name, Impression_date) would still require aggregation to produce counts and may not minimize model size as effectively.

D (calculated measure using COUNTROWS) doesn’t reduce the underlying data volume in the model and won’t help with performance the way pre-aggregation does.

Key takeaways: A and B align with minimizing model size while preserving correct filtering and granularity.
Hyderabad, India

AI Explanation - verified by madhavi.chilla09 on: June 10, 2026
Question 74:
Here’s how to think about Question 74.

DAX in the measure: Accounts := CALCULATE(DISTINCTCOUNT(Balances[AccountID]), LASTDATE('Date'[Date]))

What LASTDATE does: It returns the last date in the current filter context for the Date column. CALCULATE then uses that last date to filter Balances and counts the distinct AccountID values present on that date.

Key takeaway about the answers:

The result is highly context-dependent. If your visual or slicers are at a yearly level, LASTDATE will be the last date of that year (e.g., Dec 31). If the context is monthly, it will be the last date of that month, and so on.

In general, this measure will give you the number of distinct accounts on the last date within whatever date context is currently applied.

Applying to the hot spots:

Box 1 (last day of the year only): Not universally true. It’s true only if the current context is year-level. Otherwise, LASTDATE could point to a different last date.

Box 2 (last day of the month only): Similarly context-dependent. Only true if the current context is month-level.

Box 3: Yes — if the statement describes “the measure returns accounts on the last date in the current date context.” That is the correct general behavior of this measure.

Hyderabad, India

yash on: June 10, 2026
These type of questions are helping me a lot. I particularly don't no about the type of exam questions scale too but after searching over internet fond out level of questions so, among them this one is actually more exam oriented and free for us I really appreciate their hard work and thank you for such help.
Jaipur, India

AI Explanation - verified by mignun_15 on: June 10, 2026
Question 10:
Yes. Enabling the Floating IP on the Azure internal load balancer is what allows an ILB-based listener for an Always On AG to work correctly.

The AG listener requires a stable, internal front-end IP that clients connect to. The ILB provides that IP.

Floating IP lets the listener IP float to the current primary replica after a failover, so clients keep connecting to the same listener IP and traffic is directed to the active node.

Without Floating IP, the listener IP can become tied to a specific node, causing failover to break connectivity for the listener.

This aligns with Microsoft guidance for AG listeners behind an Azure ILB. Reference: the doc linked in the question. If you want, I can walk through the steps to configure the ILB, health probes, and backend pool.
Santo António Dos Cavaleiros, Portugal

AI Explanation - verified by madhavi.chilla09 on: June 10, 2026
Question 72:
Question 72 asks how to relate two tables that both use RLS so that bidirectional cross-filtering respects the RLS settings.

Correct answer: B — Create an active relationship between the tables and select Apply security filter in both directions.

Why: For RLS to propagate correctly in both directions, the relationship must be active and configured for bidirectional filtering with security filters applied in both directions. An inactive relationship won’t filter data by default, and “Assume referential integrity” is not about enabling RLS propagation.

Hyderabad, India

AI Explanation - verified by User7588 on: June 10, 2026
Question 21:
Question 21 asks what you should change in the scanner to get the automated scans to work, given the header log.

What the log shows: requests with a common browser User-Agent (Mozilla/5.0) get 200 responses, while requests with UA like curl or python receive no response. This suggests the target is filtering or blocking non-browser clients.

Why the correct choice is D: Modify the scanner user agent. By making the scanner mimic a normal browser, you’re more likely to get consistent responses and avoid basic bot protections that block or ignore non-browser clients. This aligns with the observed pattern in the log (browser UA works; non-browser UA does not).

Why the other options are less appropriate here:

- Slow down the scan: may help with rate-limiting, but doesn’t solve UA-based blocking evident in the log. - Change the source IP with VPN: could help if there’s IP-based blocking, but the log indicates UA-based filtering rather than IP blocking. - Only using HTTP GET: would reduce coverage and not address the blocking issue seen with non-browser UAs.
In short, the server’s behavior points to user-agent-based blocking, so adjusting the scanner’s User-Agent to resemble a real browser is the proper fix.
Markkleeberg, Germany

AI Explanation - verified by User1801 on: June 10, 2026
Question 19:
Question 19 asks whether including a Storage Area Network (SAN) meets the goal of a highly available streaming web app with constant user experience and data stored in the geographic location nearest to the user. Correct answer: B (No).
Why SAN doesn’t meet the goal:

A SAN is centralized storage used by servers in a data center. It provides high-performance storage within a single site, not geo-distribution or edge delivery.

It does not inherently provide data locality near end users or edge caching to reduce latency for streaming.

High availability across regions and a consistent streaming experience for users worldwide require geo-distributed deployment, load balancing, and content delivery at the edge.

What to use instead:

Use a Content Delivery Network (CDN) to serve streaming content from edge locations close to users.

Store data in a geo-distributed or multi-region setup (e.g., Azure Storage with geo-redundant options) and deploy your app across multiple regions.

Combine CDN with multi-region deployments and appropriate storage redundancy to meet both availability and latency requirements.

In short: SAN is not suitable for nearest-to-user data storage or global low-latency streaming; CDN and geo-distributed storage are the right approaches.
Alappuzha, India

AI Explanation - verified by User6547 on: June 10, 2026
Question 1:
The correct answer is A.

Why: In PMI risk management, when a risk you identified is realized, you should execute the pre-planned response from the risk register. If the plan called for a backup resource, cross-training, or a schedule contingency, you implement that immediately.

Why not B: Simply revising the project plan to move the task is a schedule change that should follow a defined change or contingency in the risk response—not done ad hoc.

Why not C: Excluding the task or removing it from scope isn’t a valid response to a risk event; it risks noncompliance with requirements.

Why not D: Updating the risk log/lessons learned is important for documentation, but it isn’t the immediate action to recover from the risk event.

Key concept: after a risk materializes, follow the predefined risk response in the risk register to minimize impact; only then update logs/lessons learned as part of ongoing risk management.
Riga, Latvia

AI Explanation - verified by User7378 on: June 10, 2026
Question 5:
Here’s how to approach Question 5.

Correct three options:

- Enable column profile - Show column profile in details pane - Enable details pane

Why these are correct:

- The min and max values are provided by the column profile. Enabling the column profile ensures statistical metadata is collected for each column. - To actually see those stats (including min/max) in the UI, you need the details pane to be visible and configured to show the profile data. - “Show column value distribution” and “Show column quality details” relate to other profiling metrics (distribution, quality) and aren’t needed to obtain min/max values.

What the other options do (not required for min/max):

- Show column value distribution: shows distribution details, not specifically the min/max. - Show column quality details: shows data quality metrics, not min/max.
In short, enable the column profile and ensure the profile is shown in the details pane, with the details pane itself enabled. This will display min and max values for each column.
Bengaluru, India

AI Explanation - verified by User3649 on: June 09, 2026
Question 17:
Question 17 asks which tool best supports version control for the documentation of requirements.

Multiauthoring software: Designed for collaboration with version control, track changes, and manage input from multiple authors. This fits the scenario of diligently maintaining requirement docs.

Word processor: Useful for creating docs, but not inherently strong on multi-author version control unless tied to a cloud service.

Real-time polling: Used for quick input collection, not for document version control.

Conferencing platforms: For meetings, not for documenting or version-controlling requirements.

Therefore, the correct answer is A: Multiauthoring software, because it enables collaborative editing with version history and change tracking for requirement documentation. If you’d like, I can walk through how this concept maps to your exam objectives.
Albuquerque, United States

AI Explanation - verified by User1740 on: June 09, 2026
Question 116:
Answer: A) EC2 Image Builder
Why: EC2 Image Builder is a fully managed AWS service designed to automate the entire lifecycle of custom EC2 images. You define pipelines that:

start from a base image,

apply build components/recipes,

run tests (validation steps),

and distribute/publish the final AMI across accounts or regions.

This directly covers creation, testing, and ongoing management of custom EC2 images.
Why the other options aren’t correct:

Amazon Machine Image (AMI): An image itself, not a managed service for creating/testing/managing images.

AWS Launch Wizard: Helps deploy and configure large workloads, not specifically for image pipelines.

AWS Elastic Beanstalk: Platform-as-a-service for deploying applications, not for image creation/testing.

Key takeaway: Use EC2 Image Builder when you need repeatable, compliant, automated creation and maintenance of custom EC2 images.
Powder Springs, United States

AI Explanation - verified by User5479 on: June 09, 2026
Question 33:
Answer: D
Explanation:

When using a CloudFront-backed setup with an API Gateway REST API and a custom domain, the TLS certificate must be managed in AWS Certificate Manager (ACM) in the us-east-1 region. CloudFront uses certificates from us-east-1, regardless of where your API Gateway region is.

Therefore, import the third-party certificate into ACM in us-east-1.

Then configure your custom domain (in API Gateway) to use that certificate, and create DNS so that your custom domain resolves to the CloudFront/API Gateway distribution. In DNS, this is typically a CNAME record pointing to the distribution’s domain name.

Why the other options are not correct:

- A: ACM cert in the same region as the API is incorrect for CloudFront-backed custom domains. - B: You don’t import certificates into CloudFront directly; ACM is the source. - C: ACM in the API region (not us-east-1) is incorrect for CloudFront.
Note: If you’re using an apex domain, you’d normally use an alias A record in Route 53 instead of a CNAME, but among the given choices, D is the correct approach.
Colima, Mexico

AI Tutor 👋 I’m here to help!

Cisco 351-001 Exam Actual Questions CCIE Routing and Switching v4.0 Written Beta (Page 2 )

QUESTION: 1

QUESTION: 2

QUESTION: 3

QUESTION: 4

QUESTION: 5

351-001 Exam Discussions & Posts (Share your experience with others)

Cisco 351-001 Exam Actual Questions
CCIE Routing and Switching v4.0 Written Beta (Page 2 )