Cisco 400-007 Exam Prep
Cisco Certified Design Expert CCDE v3.0 (Page 31 )

• Accept: Acknowledges the risk without taking additional action.
• Transfer: Shifts the risk or financial impact to another party, such as an insurer.
• Mitigate: Reduces the likelihood or impact through controls like patching, MFA, or segmentation.
• Avoid: Eliminates the activity that creates the risk.

• Documented and formally requested
• Analyzed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked and reversible if problems occur

• Risk management process: Identifies and evaluates risk, but does not directly authorize design changes.
• Product design process: Applies primarily while creating or developing the product.
• Design review process: May have identified the issues, but the next step for changing an already released design is controlled change management.

• Resources that do not need internet access should remain on private network segments.
• Internet-facing access should be restricted to systems that require it.
• Access should be explicitly allowed rather than broadly exposed.

• A: A single administrator with access to core functions may violate least privilege if that access is broader than necessary.
• B: Inspecting traffic supports monitoring and defense, but does not itself limit privileges.
• C: Updating routing configurations supports availability and connectivity, not least privilege.

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• 800 devices ? a scalable, centralized solution is needed.
• Four hardware/vendor classes ? the tool must handle different drivers and images.
• Two user groups ? it should allow different configurations for each group.
• “Distribute custom images” ? an imaging/deployment tool is required, not just a file-copy utility.

• desktopwidth:i:1280
• desktopheight:i:1024

• Connection information: Controls connection-related settings, not the desktop resolution.
• Scaling plan: Controls when session hosts start, stop, or scale based on demand.
• Session behaviour: Controls behavior such as disconnect or logoff handling.
• Display settings: Specifically controls RDP display properties, making it the appropriate choice.

• Online payment fraud
• Account takeover
• Fake account creation
• Suspicious transactions

• Identity provider (IdP): Authenticates users and asserts their identity.
• Service provider (SP): The application being accessed—in this case, Salesforce/the employee portal.
• Identity store: A directory that stores user identities, such as Active Directory.
• Authentication store: A system used to validate credentials.

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• Monitoring: Detects activity but does not remove the underlying risk.
• Patching: Useful for systems that must remain operational, but these desktops are unused.
• Isolating: Can be a temporary containment measure, but permanently removing unnecessary systems is more appropriate.

• Reduce the training data: Usually makes overfitting worse.
• Add hyperparameters: Hyperparameters already control training; simply adding them does not solve the problem. Proper tuning could help, but that is not what the option states.
• Increase training time: More training can worsen overfitting if the model is already memorizing the training data.

• Deterministic approve/reject results
• Strict adherence to predefined rules
• Consistent, reproducible outcomes
• Auditability and regulatory compliance

• BCP (Business Continuity Plan): Ensures the organization can continue its broader business operations during and after a disruption. It is broader than the IT-focused recovery required here.
• Communication plan: Defines how information is shared with employees, the public, and other stakeholders; it does not restore systems.
• IRP (Incident Response Plan): Handles and contains security incidents, such as malware or unauthorized access. A tornado is a disaster, not primarily a cybersecurity incident.

• Determining ISP-assigned address space: Usually involves public reconnaissance, such as WHOIS or regional Internet registry information.
• Bypassing DNS sinkholing: Would require evidence that malicious domains are resolving outside the organization’s sinkhole controls.
• Achieving initial access: DNS log entries alone do not demonstrate compromise or entry.
• Exfiltrating data: DNS tunneling generally involves repeated queries containing encoded or unusually long data, not merely internal host discovery.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• The S3 bucket as an origin for static content
• The Application Load Balancer (ALB) as an origin for dynamic content
• An Amazon Route 53 alias record pointing the application domain to CloudFront

Why this works

• Static data: CloudFront caches objects from S3 at edge locations, reducing latency for users worldwide.
• Dynamic data: CloudFront forwards requests that require application processing to the ALB. It can also maintain persistent connections and use the AWS global edge network to improve delivery performance.
• One domain: CloudFront behaviors can route different path patterns to different origins—for example, /static/* to S3 and other paths to the ALB.

Why the other options are incorrect

• Global Accelerator is designed primarily for accelerating traffic to applications with endpoints such as ALBs, not for caching S3 content.
• Using separate domains or splitting static and dynamic traffic adds unnecessary complexity.
• CloudFront already provides the required global edge distribution and caching, so combining it with Global Accelerator is unnecessary here.

apex 
for (Account updatedAccount : Trigger.new) { 
    AccountTriggerHelper.notinyxternalSystem(updatedAccount.Id); 
}

• Too many callouts: The callout occurs asynchronously in the future method, and each future transaction can perform its permitted callouts.
• Too many SOQL queries: The SOQL query is inside the future execution, not repeatedly in the trigger transaction.
• Callout from triggers not supported: Direct callouts from triggers are prohibited, but the trigger delegates the callout to asynchronous Apex, which is the correct pattern.

• Escape to host: A virtualization attack where code escapes a guest VM and accesses the host system. Nothing in the scenario mentions virtualization.
• Browser extension: Can redirect or manipulate web-browser traffic, but not normally database-server traffic.
• Valid accounts: Describes using stolen or compromised credentials, not redirecting network traffic.
• Process injection: Injecting malicious code into a legitimate database or networking process could allow an attacker to alter how that process handles outgoing traffic.

• Maintain head office control: Transfer pricing generally supports decentralisation rather than direct head-office control.
• Establish centralised decision making: This conflicts with divisional autonomy.
• Develop a top-down culture: Transfer pricing is intended to support empowered divisions and goal congruence, not impose purely top-down management.

• Field name and label
• Data type
• Reference table
• Default value
• Whether the field is mandatory or read-only
• Field attributes and configuration

• A: Labels and translations are handled through documentation and translation-related records.
• C: Table relationships may be represented through reference fields, but this is not the primary description of the Dictionary.
• D: Spell-checking language data is unrelated to the System Dictionary.

• B. Users accessing Salesforce from public Wi-Fi

• C. Users choosing the same password as their Facebook password

• A: 2FA does not protect an already-authenticated, unlocked session if someone accesses an unattended laptop.
• D: Weak password-reset questions are an account-recovery weakness. 2FA primarily strengthens login authentication, not necessarily the security-question reset process.

• The requirement is an assessment of the Azure environment’s design, which requires a support plan offering proactive architectural guidance.
• Premier support would provide this capability, but it is a high-cost option.
• Since the requirement says to minimize expenses, Premier is not the best recommendation.
• A lower-cost plan with the required advisory/design-review capability—historically Professional Direct in Azure’s support-plan model—would be more appropriate.

1. Install a Cassandra-compatible ODBC driver.
2. Configure a data source name (DSN), if required.
3. In Power BI Desktop, select Get Data > ODBC.
4. Choose the configured DSN and connect.

• Microsoft SQL Server database: Connects to SQL Server, not Cassandra.
• OLE DB: Requires a compatible OLE DB provider; this is not the standard choice for Cassandra in Power BI.
• OData: Requires Cassandra data to be exposed through an OData service, which is not the normal direct connection method.

• Replaces the verbal message — this describes non-verbal communication being used instead of words.
• Substitutes for verbal communication — similar; it means communicating without speech.
• Confuses the verbal message — this occurs when non-verbal signals contradict or obscure the spoken message.

• The type of change: standard, normal, or emergency
• The risk, impact, and complexity
• The change model being used

• A standard change may be pre-authorized through its change model.
• A normal change may require assessment and approval by an appropriate change authority.
• An emergency change may be authorized by an emergency change authority, often using an expedited process.

• Change authorities are not only needed for emergency changes.
• They are not assigned only when a change is deployed.
• They are not only required for normal changes.

• netstat: Shows local network connections and listening ports, but not which WAN path carries the traffic.
• nslookup: Resolves domain names to IP addresses.
• ping: Tests reachability and latency but does not show the route.

• Honeypots: Decoy systems or services made to attract attackers. Legitimate users should not interact with them, so activity there is a strong indicator of malicious behavior.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system. This can reveal infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens.
• CI/CD: Automates software development, testing, and deployment.
• Threat modeling: Identifies and analyzes potential threats before or during system design.
• Data obfuscation: Makes data harder to understand or interpret.

• Transport and handling
• Storage and warehousing
• Refrigeration
• Shelf-stacking or replenishment
• Other costs directly attributable to product P

• Sales process: Controls which Opportunity Stage values are available.
• Record type: Associates the appropriate sales process with a business scenario and controls available picklist values.
• Page layout: Controls which fields are displayed and whether they are required or read-only.

• Energy Market Team 1 ? Record Type 1, Sales Process 1, Page Layout 1
• Energy Market Team 2 ? Record Type 2, Sales Process 2, Page Layout 2
• Services/Installation Team ? Record Type 3, Sales Process 3, Page Layout 3

• Amazon SageMaker — charges apply for compute, storage, and other resources used.
• AWS Config — generally charges for configuration recording and rule evaluations.
• Amazon CloudWatch — has a limited free tier, but many metrics, logs, alarms, and API usage can incur charges.

• Microservices: An application-design approach that divides an application into smaller services. It does not inherently reduce the number of operating systems.
• Virtualization: Creates virtual machines, but each VM generally requires its own complete operating system. This improves isolation but does not minimize OS instances as effectively.
• Infrastructure as code: Uses code to automate infrastructure deployment and configuration. It improves consistency but does not determine how many operating systems are used.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best tool for scanning uploaded files.
• C. Load balancer: Improves availability and distributes traffic but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may inspect HTTP requests, but malware scanning of uploaded PDFs is the key requirement here.

• C series: CPU-optimized instances; not designed primarily for LLM training.
• G series: GPU instances generally optimized for graphics and some machine learning workloads, but not specifically large-scale model training efficiency.
• P series: Powerful GPU instances for ML training, but typically consume more energy than Trainium-based instances for suitable training workloads.

1. Create a custom Sensitive Information Type (SIT) in the Microsoft Purview portal.
2. Use a regular expression to match the 32-character alphanumeric account number.
3. Reference that SIT in the DLP policy protecting SharePoint Online.

• Format-based data ? custom SIT with RegEx
• Built-in sensitive data ? Microsoft-provided SIT
• Document classification/protection ? sensitivity labels
• Security investigation queries ? Advanced Hunting, not DLP detection

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting the risk’s impact to a third party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through security controls.
• Avoid: Eliminating the activity or process that creates the risk.

• The ERSPAN source is the device or interface whose traffic is being copied.
• The ERSPAN destination is the device receiving the encapsulated copy and forwarding it to the traffic analyzer.
• The local monitor session number is locally significant. Therefore, the source and destination do not need matching session IDs such as 47 or 48.
• The erspan-id identifies the ERSPAN stream and must correspond between the source and destination configuration.

• vBond — orchestration plane: Authenticates devices, helps them discover each other, and assists with NAT traversal and initial control-connection setup.
• vSmart — control plane: Distributes routing and policy information to WAN Edge devices using the overlay control plane.
• vManage — management plane: Provides centralized configuration, monitoring, and orchestration through its GUI/API.
• WAN Edge — data plane: Forwards user traffic across the SD-WAN fabric.

• Customer: Dual
• Date: Dual
• Sales: DirectQuery
• SalesAggregate: Import

• Sales – DirectQuery: Near-real-time data should not rely on an imported cache. DirectQuery sends queries to the source when visuals are loaded, allowing recent sales data to appear.
• SalesAggregate – Import: A weekly refresh is sufficient, and imported data generally gives faster visual performance because it is stored in Power BI’s in-memory cache.
• Customer and Date – Dual: These are dimension tables used with both the DirectQuery Sales table and the imported SalesAggregate table. Dual allows Power BI to use cached data when possible, while still behaving appropriately in queries involving DirectQuery data. This can improve performance and reduce unnecessary limited relationships.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio management
• Data governance
• Risk management
• Compliance

• The servers are powered on.
• The network is functioning.
• Devices can still reach the server network.

• ARP poisoning: Redirects or intercepts local network traffic; it usually affects communication paths rather than overwhelming a service.
• Jamming: Disrupts wireless or radio signals. It would not fit a system that remains accessible from devices on the server network.
• Kerberoasting: Attempts to crack service-account credentials from Kerberos tickets; it does not normally cause an immediate outage.

• Planning and designing products and services
• Developing and delivering them
• Managing risks, suppliers, and resources
• Measuring performance
• Continually improving value delivery

• Value stream steps describe activities used to create and deliver value; they do not themselves provide the broader capabilities.
• Vision and operating model provide direction and structure, but they are not the practical management capabilities that enable the work.
• Value chain is the operating model showing how activities combine to create value; it is enabled by practices and resources.

• Domain controllers, because the requirement specifically excludes them. However, note that both member servers and domain controllers run Windows Server, so OS targeting alone cannot distinguish them unless the targeting option allows selecting the relevant server role/version. In the usual exam interpretation, target the applicable server OS category.
• Client computers, because they run a client Windows operating system.

• Domain: Targets membership in a domain, not the computer’s operating-system type.
• Security Group: Would require creating and maintaining a group containing all member servers, increasing administrative effort.
• Environment Variable: Not designed to reliably identify member servers.

• A: Allow SAN certificates — SANs are used to identify valid hostnames in a certificate. They do not bypass trust validation.
• C: Open the secure LDAP port — A blocked port would normally cause a timeout or connection-refused error, not certificate errors.
• D: Increase the TLS version on the RA — The issue concerns certificate trust, not the organization’s registration authority.

• D — Create sibling resource pools for the Production VMs and Test VMs.

• B — Configure a memory reservation on the Production resource pool.

• Shares only determine relative priority when resources are scarce; they do not guarantee memory.
• A parent resource pool alone does not provide a guarantee.
• A child pool for Test VMs does not reserve memory for Production.

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.

• Advanced Persistent Threat (APT): A sustained, targeted attack campaign or attacker group—not a vulnerability.
• Trojan: Malware disguised as legitimate software.
• Stealthware: A general term for malware designed to avoid detection; it does not specifically mean an unknown vulnerability.

• Identifying the communication strategy: Usually part of a business continuity or incident response plan.
• Evaluating the risk management plan: Part of risk assessment and risk management activities.
• Establishing backup and recovery procedures: Usually part of disaster recovery planning.
• Developing the incident response plan: Part of incident response planning.

• File hashes
• Strings and metadata
• Binary or code structure
• Known malicious patterns
• Embedded indicators or signatures

• Sandbox: Executes the file in an isolated environment; useful for observing behavior, but usually slower.
• Network traffic analysis: Examines communications generated by a system or application, not the file itself.
• Package monitoring: Tracks software packages or installations and is not the primary method for examining malware signatures.