Cisco 500-220 Exam Prep
Cisco Meraki Solutions Specialist (Page 5 )

• The message came from the claimed sender (authentication)
• The message was not altered (integrity)
• The sender cannot easily deny sending it (non-repudiation)

• Attackers can send unsigned phishing emails.
• Attackers may compromise a legitimate account and send signed malicious emails.
• Users may still be tricked by a validly signed message.

• The ERSPAN source is the device or interface whose traffic is being copied.
• The ERSPAN destination is the device receiving the encapsulated copy and forwarding it to the traffic analyzer.
• The local monitor session number is locally significant. Therefore, the source and destination do not need matching session IDs such as 47 or 48.
• The erspan-id identifies the ERSPAN stream and must correspond between the source and destination configuration.

• Understating expenses and liabilities
• Overstating profit
• Misleading users of the financial information
• Potentially breaching integrity, objectivity, and professional competence and due care

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

• Escape to host: A virtualization attack where code escapes a guest VM and accesses the host system. Nothing in the scenario mentions virtualization.
• Browser extension: Can redirect or manipulate web-browser traffic, but not normally database-server traffic.
• Valid accounts: Describes using stolen or compromised credentials, not redirecting network traffic.
• Process injection: Injecting malicious code into a legitimate database or networking process could allow an attacker to alter how that process handles outgoing traffic.

• Record changes — a flow can start when a record is updated or otherwise changes.
• Schedules — a flow can run at a specified date/time or on a schedule.
• Record inserts — a flow can start when a new record is created.

• Subflows are reusable flow components called by another flow; they are not normally trigger types.
• Record views do not generally initiate a Flow Designer flow.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• A class/teacher fact should contain one row per Class ID. It can support the count of classes and contain attributes such as Teacher First Name and Period Number.
• An attendance fact should contain one row per attendance event, such as Class ID + student + date. It supports attendance counts by day and monthly averages.

• Teacher First Name ? Teacher fact
• Period Number ? Attendance fact

• Crash cart: Provides local physical access, not remote access.
• Jump box: A secured intermediary used to reach devices over the normal network; it may be inaccessible if the appliance has not booted.
• Secure Shell (SSH): Requires the device’s operating system and network services to be running properly.

• Future costs — Only costs occurring in the future can be affected by the investment decision. Past costs are sunk and irrelevant.
• Incremental costs — These are additional costs caused by choosing the investment. They are relevant because they differ between alternatives.
• Cash flows — Capital investment decisions are based on future cash inflows and outflows, usually discounted to present value.

• Committed costs have already been agreed or incurred and generally cannot be changed by the decision.
• Unavoidable costs will arise regardless of which option is selected, so they do not affect the choice.

• NAT traversal: Helps WAN Edge, vSmart, and vManage devices discover how to reach one another through NAT.
• Initial orchestration: Authenticates and introduces devices when they first join the SD-WAN fabric.
• Connection brokering: Provides information that allows devices to form their required control connections, after which the vBond is generally not in the data path.

• WAN Edge: Forwards user traffic and forms secure tunnels.
• vSmart: Controls the overlay control plane and distributes routes and policies.
• vManage: Provides centralized management, configuration, and monitoring.

• The listener uses a virtual IP address shared by the availability-group replicas.
• Floating IP, also called Direct Server Return (DSR), allows the SQL Server nodes to respond using the listener’s IP address rather than their individual VM IP addresses.
• This is required for the availability-group listener to function correctly with an Azure internal load balancer.

• A — Tables
• B — Named file formats
• C — Schemas
• E — Databases

Why these are correct

• Tables: Can be cloned using CREATE TABLE ... CLONE. The clone initially uses zero-copy cloning, so storage is shared until changes are made.
• Named file formats: Can be cloned as database objects, preserving the file-format definition.
• Schemas: A schema and its eligible objects can be cloned.
• Databases: A database and its eligible schemas and objects can be cloned.

Why the others are incorrect

• Shares: A share is an account-level data-sharing object, not a normal cloneable database object.
• Users: Users are security principals and cannot be cloned with CLONE.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

Recommended process

1. Access each switch’s terminal.
2. Use help to identify available commands.
3. Use the MAC table command, such as:

text 
   show mac-address-table

1. Use VLAN information, such as:

text 
   show vlan

1. Use interface information, such as:

text 
   show ip interface brief

1. Record each device’s:

• Reconnaissance: Gathering information about the target.
• Weaponization: Creating or combining a malicious payload with a delivery method.
• Delivery: Sending the payload, such as through phishing.
• Exploitation: Triggering a vulnerability or weakness to gain execution or access.

• B — Sales staff will tender for riskier contracts:

• C — Sales staff will encroach on other territories:

• D — Sales staff will look for new jobs:

Manager role

DAX 
Country[Manager] = USERPRINCIPALNAME()

• Sales
• Human Resources

CFO role

• See sales for all countries
• See no Human Resources data

• Do not restrict the Country table or Sales table.
• Apply a filter to Human Resources that always returns false, such as:

DAX 
FALSE()

• User1 (user1@contoso.com) — This is an external guest in the Fabrikam tenant. Assuming the guest uses email one-time passcode authentication, Azure AD emails a passcode to user1@contoso.com.
• User2 (user2@outlook.com) — An Outlook.com address can authenticate with a Microsoft account, so Azure AD uses that account’s authentication rather than sending an email OTP. The fact that User2 has never accessed Fabrikam resources does not by itself trigger OTP.
• User3 (user3@fabrikam.com) — This is an internal Fabrikam user, so the user signs in with the organization’s normal credentials and does not receive a guest OTP.

apex 
for (Account updatedAccount : Trigger.new) { 
    AccountTriggerHelper.notinyxternalSystem(updatedAccount.Id); 
}

• Too many callouts: The callout occurs asynchronously in the future method, and each future transaction can perform its permitted callouts.
• Too many SOQL queries: The SOQL query is inside the future execution, not repeatedly in the trigger transaction.
• Callout from triggers not supported: Direct callouts from triggers are prohibited, but the trigger delegates the callout to asynchronous Apex, which is the correct pattern.

1. The specific table — for example, incident
2. The parent table — for example, task
3. The wildcard table — *, which applies broadly

• Admin access to the deployment pipeline
• Contributor access to the Development and Test workspaces
• Viewer access to the Production workspace

• Company documents
• Databases
• Knowledge bases
• Current web or business data

• A: Describes diversity and inclusive design, not grounding.
• B: Describes explainability or model interpretability.
• D: Describes documenting a model’s capabilities and limitations.

• A user connects with their Google account.
• Google associates the user’s SSH key with that identity.
• IAM roles determine whether they can log in.
• Access can be tied to a specific employee for auditing.
• Removing the IAM role removes their login access.

• compute.osLogin: regular OS login access
• compute.osAdminLogin: OS login with administrative privileges, typically including sudo

text 
enable-oslogin=TRUE

• Deterrent control: The signs warning people they may be filmed discourage unauthorized or malicious behavior. They may prevent incidents by influencing behavior, but their primary purpose is to deter.
• Detective control: The CCTV system monitors and records activity so security personnel can identify suspicious or unauthorized actions.

• Preventive: Blocks or prevents an incident, such as a lock or access-control system.
• Corrective: Fixes or restores systems after an incident.
• Directive: Tells people what they must do, typically through policies or procedures.
• Compensating: Provides an alternative control when the preferred control cannot be used.

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized or malicious activity. They do not directly stop the action; they influence behavior.
• Detective control: CCTV records or monitors activity so security personnel can identify events or investigate them afterward.

• Preventive: Stops an incident from occurring, such as access control.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: An alternative control used when the preferred control is not feasible.

DAX 
Previous Year Sales = 
CALCULATE( 
    [Total Sales], 
    PARALLELPERIOD('DATE'[Month], -1, YEAR) 
)

• CALCULATE evaluates [Total Sales] after modifying the filter context.
• PARALLELPERIOD shifts the current date period. -1 moves it backward, and YEAR specifies a one-year shift.
• 'DATE'[Month] is the date column used for the time calculation. In a proper date table, this should be a real date column or an appropriate calendar column—not merely text such as "January".

• state preserves the client’s original context, such as the specific idea URL the user requested.
• The portal sends that value in the OAuth authorization request.
• Salesforce returns it after authorization, allowing the portal to redirect the user to the original idea rather than the Ideas home page.

• Maximum response and resolution times
• Expected uptime or availability
• Performance requirements
• Escalation procedures
• Consequences for failing to meet requirements

• SOW: Defines a project’s scope, tasks, deliverables, and schedule.
• MOA: Documents specific responsibilities agreed upon by two parties.
• MOU: Records a general understanding or intent to cooperate.

• Disable high concurrency: This changes session-sharing behavior but does not provide dedicated compute or true workload separation.
• Modify the number of executors: Adjusts resources within a Spark job; it does not isolate bronze and silver processes.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

• A — Use getRecordTypeInfosByDeveloperName()

apex 
  Id rtId = Schema.SObjectType.Account 
      .getRecordTypeInfosByDeveloperName() 
      .get('Business_Account') 
      .getRecordTypeId();

• C — Query the RecordType object

apex 
  RecordType rt = [ 
      SELECT Id 
      FROM RecordType 
      WHERE SObjectType = 'Account' 
      AND Name = 'Business Account' 
      LIMIT 1 
  ];

• B: An outbound SOAP call is unnecessary and inefficient.
• D: Hardcoding an ID is not dynamic, and IDs can differ between orgs.

• Azure Machine Learning Studio is designed to build, test, train, and deploy machine-learning models, including predictive analytics.
• Azure Cosmos DB is a globally distributed NoSQL database. It can store data used by an AI solution, but it is not the primary service for developing and deploying predictive models.
• Therefore, the appropriate recommendation is Azure Machine Learning Studio, as shown in Question 15.

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

• File1.png — Yes: User1 can apply Label1 with the Microsoft Purview Information Protection client. The client supports labeling image files such as .png in this scenario.

• Folder2 — No: Folder2 is the root folder. The client does not allow labeling the root folder itself. Although the client can label ordinary folders, selecting one applies the label to existing files and subfolders—not automatically to future files.

• File1.docx — Yes: .docx is a supported Microsoft Word file type, so User1 can apply Label1 to it.

• terraform init is normally required first, especially for a new or changed working directory. It installs providers/modules and configures the backend.
• terraform plan previews the proposed changes.
• terraform apply applies those changes. It also creates a plan internally if you have not supplied a saved plan.

text 
terraform init 
terraform validate       # optional but recommended 
terraform plan 
terraform apply

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer attacks

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and transport protocols; it cannot deeply inspect web application content.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specifically designed to protect web applications.
• UTM: Combines several security functions in one appliance, but it is not the most targeted solution for a web portal.

• Labels control access and protection, not blanket exclusion.
• If the user has permission to open a labeled file—especially if the label allows authenticated users to view it—Copilot can use that file in a summary.
• If the label applies encryption and the user lacks the required usage rights, Copilot should not use the file or reveal its contents.
• Copilot honors the user’s existing permissions, so it should not expose labeled content to an unauthorized user.

• Owner, Contributor, and Network Contributor provide sufficient management permissions.
• Reader can view Traffic Analytics data but cannot enable or configure it.

• # Development
• # Testing
• # Production

• Separate endpoints: relate to compute or connectivity, not dashboard labels.
• Separate queries: retrieve or transform data but do not designate visual sections.
• Direct text written into the dashboard in editing mode: dashboards use text boxes, typically with Markdown formatting, rather than arbitrary text placed directly on the canvas.

Correct reasoning

• Create storage5 as a General-purpose v2 (StorageV2) account.
• Configure Blob object replication from storage5 to an existing compatible storage account.
• The destination must support object replication—typically another StorageV2 or premium block blob account.
• Blob versioning must be enabled on both accounts.
• Blob change feed must be enabled on the source account.
• The accounts must meet Azure’s object-replication requirements, including being in supported regions and having compatible configuration.

1. Write a structured log entry to CloudWatch Logs containing:

1. Create a CloudWatch Logs metric filter that:

text 
ApiRequests 
Operation=GetOrders 
ResponseCode=500 
Version=2.4.0

• B is incorrect: CloudWatch Logs Insights queries analyze logs but do not directly publish metrics in this manner.
• C is incorrect: ALB access logs do not contain arbitrary Lambda response metadata as custom fields.
• D is incorrect: X-Ray traces and insights are not the appropriate mechanism for creating these custom, dimensioned application metrics.

• A. IDS attack signatures: Detects suspicious network activity, but is not primarily designed to scan uploaded files for malware.
• C. Load balancer: Distributes traffic among servers and improves availability; it does not inspect files for threats.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection, but its primary role is not malware scanning of uploaded documents.

• Periodic vulnerability assessments: Identify technical weaknesses but do not establish governance or ensure risks are managed.
• Established information security metrics: Help measure performance and report status, but measurement alone does not make governance effective.
• Advanced security technologies: Support security operations, but governance is primarily about direction, accountability, decision-making, and alignment with business objectives.

• Sets a high initial price for a new product.
• Targets customers willing to pay more, often called early adopters.
• Gradually reduces the price to attract more price-sensitive customers as the product becomes less novel and competition increases.

• Penetration pricing: starts with a low price to gain market share quickly.
• Premium pricing: maintains a high price to communicate superior quality or status; it does not necessarily involve later price reductions.
• Loss leader pricing: sells one product at a very low price, sometimes below cost, to attract customers who may buy other products.

1. Open the Microsoft Entra Connect wizard.
2. Select Configure.
3. Choose Customize synchronization options.
4. Authenticate when prompted.
5. On the Domain and OU filtering page, select:

1. Complete the wizard.

• Start-ADSyncSyncCycle only starts synchronization; it does not change which OUs are included.
• Manage federation configures federation settings, which are unrelated to OU filtering.
• Add-ADSyncConnectorAttributeInclusion concerns connector attributes, not selecting additional OUs for synchronization.

Correct sequence

1. Merge Sales_Region with Sales_Manager using an inner join

1. Merge Region_Manager with Manager using an inner join

1. Merge Sales_Region and Region_Manager using a right join as a new query

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

• The CSV contains the external users’ email addresses.
• The bulk invitation feature supports inviting many guest users in one operation.
• Each invited user becomes a guest account in contoso.com.