Free 700-905 exam questions in PDF & AI Tutor

AI Explanation - verified by Felix.kariuki on: May 20, 2026
Question 116:
The correct expression is: [Email Address] = USERPRINCIPALNAME() (Option D).
Why:

For dynamic RLS, you want to filter by the current user. The function USERPRINCIPALNAME() returns the current user’s login (typically their email) in both Power BI Desktop and the Power BI service.

Using USERNAME() would return a Windows domain\username format, which usually won’t match the Email Address column.

The other options mix mismatched columns (e.g., comparing Employee Name to a login) or use invalid syntax.

So, the proper filter is: [Email Address] = USERPRINCIPALNAME().
Nairobi, Kenya

AI Explanation - verified by antonioteleconsys on: May 20, 2026
Question 46:

Answer: A (Active assessment)

Why:

The scenario says Dickson is using automated tools to actively probe the network to identify hosts, services, and vulnerabilities. That describes active scanning, where systems are contacted and probed to discover weaknesses.

Passive assessment would involve only monitoring or analyzing traffic/logs without directly interacting with the hosts.

External vs Internal isn’t explicitly defined by the text, but the key distinguishing factor here is the active probing method, which points to Active assessment.

Note: The answer key shown in the material lists External (B), but that seems inconsistent with the description. The described activity aligns with an active vulnerability scan (A).

Rome, Italy

AI Explanation - verified by User7540 on: May 20, 2026
Question 2000:
Here’s a quick breakdown of those IPv6 prefixes and what they mean.

2000::/3 — Global Unicast Address (GUA)

- Purpose: routable on the Internet; globally unique. - Use: end devices on public networks; assigned by Regional Internet Registries (RIRs). - Note: covers a large portion of the public unicast space (roughly 2000:: to 3FFF:FFFF:FFFF:FFFF).

FC00::/7 — Unique Local Address (ULA)

- Purpose: private address space for internal networks; not routable on the public Internet. - Use: similar role to private IPv4 addresses (like 10.0.0.0/8 or 192.168.0.0/16). - Typical practice: use FD00::/8 (a locally assigned subset) with a generated Global ID to avoid collisions when merging networks.

FE70::/10 — Link-Local Unicast Address (LLA) (note: the official link-local prefix is FE80::/10)

- Purpose: local to a single link; not routable beyond the local network segment. - Use: automatic addressing and neighbor discovery on a link (no router needed). - Relation to FE80::/10: FE70::/10 is within the same general link-local range; all FE80::/10 addresses are link-local.

FF00::/12 — Multicast Addresses

- Purpose: one-to-many delivery to multiple receivers. - Use: identifies groups rather than a single host; scope is further refined by additional bits (e.g., link-local, site-local, global). - Note: IPv6 multicast uses FF00::/8 as the broader space; FF00::/12 is a common subrange for certain scoped multicast groups.
Examples: 2001:db8::1 (GUA), FD12:3456:789a::1 (ULA), FE80::1 (link-local), FF02::1 (all nodes on link).
St Albans, United Kingdom

AI Explanation - verified by User7540 on: May 20, 2026
Question 27:
Question 27 asks for two differences between optical-fiber cabling and copper cabling.

The two correct choices are B and D.

Why:

B: The glass core is encased in a cladding. In fiber, the core (glass) is surrounded by cladding with a lower refractive index to keep light in the core by total internal reflection.

D: Light is transmitted through the core of the fiber. The signal in fiber is light traveling inside the glass core; copper uses electrical signals in metal conductors.

Why the others are false:

A: A BNC connector is used for fiber connections — false. BNC is common on coaxial copper.

C: The data can pass through the cladding — false. Data travels in the core; cladding confines the light, not carry data.

E: Fiber connects to interfaces using RJ-45 — false. RJ-45 is a copper Ethernet connector.

On your note about cladding in copper: copper cables have insulation (and may have shielding) but not a fiber-like cladding layer. Cladding is specific to optical fiber to enable light propagation, not to copper’s electrical signaling. If you want, I can explain more differences between fiber and copper.
St Albans, United Kingdom

AI Explanation - verified by User7540 on: May 20, 2026
Question 14:
Yes—you’re right to think it’s due to being reserved.

In a /30 subnet, there are 4 addresses: network, two usable hosts, and broadcast.

- Example 10.2.1.0/30: - Network: 10.2.1.0 - Usable: 10.2.1.1 and 10.2.1.2 - Broadcast: 10.2.1.3

Therefore 10.2.1.3 is the broadcast address for that /30 and cannot be assigned to an interface.

Option D (209.165.201.2 with 255.255.255.252) uses the /30 209.165.201.0 network, where 209.165.201.1 and 209.165.201.2 are usable and 209.165.201.3 is broadcast. That makes D a valid usable IP for a /30 between two routers; the 10.2.1.3 choice is invalid because it’s the broadcast address.
St Albans, United Kingdom

AI Explanation - verified by minakshi.panjwani on: May 20, 2026
Question 39:
Short answer: No — the solution as shown does not meet the goal.
Why:

In KQL, the correct operator to order results is sort by, not order by. Using order by is invalid.

You also need to filter for Neighbourhood = "Sands End" and No_Bikes >= 15, then sort by No_Bikes in ascending order, and project the required columns.

Correct approach (example KQL):
Bike_Location | where Neighbourhood == "Sands End" and No_Bikes >= 15 | sort by No_Bikes asc | project BikepointID, Street, Neighbourhood, No_Bikes, No_Empty_Docks, Timestamp

Key points:

Filter: where Neighbourhood == "Sands End" and No_Bikes >= 15

Order: sort by No_Bikes asc (ascending)

Projection: include the specified columns to return only what’s needed

This will return rows for Sands End with at least 15 bikes, ordered by No_Bikes from smallest to largest.
Bengaluru, India

AI Explanation - verified by User3547 on: May 20, 2026
Question 4:
Here’s how to reason it through, using your description.

Key concept: In EVPN, a MAC-VRF is created per EVI (EVPN instance). The number of MAC-VRFs equals the number of EVIs.

Your description: “4 PEs using the same VPLS 1” implies there is a single EVPN service (one EVI, e.g., EVI 1) shared across multiple PEs.

Therefore, there would be just 1 MAC-VRF, not 2.

If the diagram actually shows two EVIs (e.g., VPLS 1 and VPLS 2), then there would be 2 MAC-VRFs. But with only VPLS 1 shown, the correct count is 1.
If you can confirm whether there are two EVIs in the image, I can update the conclusion.
Porto, Portugal

AI Explanation - verified by User6709 on: May 20, 2026
Question 42:

Correct answer: A. System characterization

Why: Risk assessment starts with defining the system’s scope—its boundaries, the resources, and the information that make up the systems. This is the system characterization step, which sets the context for later steps like threat/vulnerability analysis and likelihood/impact assessments. The option C. Likelihood determination is a later step in risk analysis, not the initial scoping. The question’s described activity matches system characterization, not likelihood assessment.
Rome, Italy

AI Explanation - verified by User6709 on: May 20, 2026
Question 41:

Correct answer: D. Malicious insider threats

Why: Employee monitoring tools are used to detect and deter inappropriate or unauthorized actions by employees, such as data exfiltration, privilege abuse, unusual access patterns, and policy violations. They’re not primarily for finding artifacts like lost registry keys, nor specifically for “stolen credentials” (that falls more under credential compromise/monitoring and access control). “Conspiracies” isn’t a standard security term; the focus is on insider threats—whether malicious or negligent.
Rome, Italy

AI Explanation - verified by User2578 on: May 20, 2026
summary is irelevant then i only watch subnet
Got it. If you’re focusing only on the subnets (not the summary), these are the four /27 subnets you’d use for the floors:

Floor 1: 192.168.0.0/27

Floor 2: 192.168.0.32/27

Floor 3: 192.168.0.64/27

Floor 4: 192.168.0.96/27

Why /27? Each floor needs up to 30 usable addresses (24, 29, 28, 22 hosts), and a /27 provides 32 addresses (30 usable).
Key idea for subnets:

Each /27 block starts every 32 addresses (0, 32, 64, 96 within 192.168.0.0/24).

You would configure four separate subnets (one per floor) on the router.

Note on summary (even if you’re not focusing on it): you could summarize these four /27s into a single route like 192.168.0.0/25, but that’s optional depending on your routing design. If you’re just memorizing subnets, stick with the four /27s listed above.
Belgrade, Serbia

AI Explanation - verified by User4631 on: May 20, 2026
Question 3:

Answer: A) Power BI dataset

Why: Since the report should be built from data that already has a data model and measures, using an existing Power BI dataset lets you reuse the model and calculations, minimizing development effort. You can create the report on top of that dataset without re-importing or re-creating measures.

Why the other options are less suitable:

- SharePoint folder: would re-import the Excel data rather than reuse the existing model. - Power BI dataflows: adds extra ETL steps; not as focused on reusing the existing measures. - Excel workbook: would re-import data and require recreating or duplicating measures.
In short, using a Power BI dataset lets you leverage your existing measures and model, reducing effort and ensuring consistency across reports.
Bengaluru, India

AI Explanation - verified by User6902 on: May 20, 2026
Question 21:
Question 21 is about choosing the right built-in role to let Admin1 manage load balancers with the principle of least privilege.
Correct answer: Network Contributor at the scope of the resource group (RG1).
Why:

The Network Contributor role lets you manage networking resources (including load balancers) but does not grant access to grant others permissions, aligning with least privilege.

Assigning it at the RG1 scope covers both LB1 (internal) and LB2 (public) without giving broader rights.

How to apply (high level):

In Azure Portal, go to RG1 ? Access control (IAM) ? Add role assignment.

Role: Network Contributor

Scope: RG1 (apply to the entire resource group)

Assign to Admin1.

Notes:

This avoids giving broader roles like Contributor or Owner that allow more than networking management.

If you applied the role only to one LB resource, Admin1 would still be able to manage that one LB, but RG1 scope ensures access for both LB1 and LB2.

Pretoria, South Africa

AI Explanation - verified by User4710 on: May 20, 2026
Question 56:

The answer to question 56 is False.

Why:

The Salesforce Import Wizard (Data Import Wizard) supports importing certain standard objects, notably Accounts, Contacts, Leads, and some related items. Opportunities are not supported by the Import Wizard.

To import Opportunities, you would typically use the Data Loader (or other API tools) instead.

If you need to relate Opportunities to Accounts during import, you can first import Accounts (potentially using external IDs) and then import Opportunities using those Account references (e.g., via AccountId or external ID mappings).

Mumbai, India

AI Explanation - verified by User4710 on: May 20, 2026
Question 40:
Answer: Controlling
Explanation:

A controlling picklist determines which values appear in another picklist (the dependent picklist).

The dependent picklist’s available values are filtered based on the value selected in the controlling field.

Example: Controlling field = Region (East, West). Dependent field = City; if Region = East, City options might be New York or Boston; if Region = West, City options might be San Francisco or Seattle.

To configure: create both picklists on the object, define a dependency (Controlling Field ? Dependent Field) in Setup, and map the values accordingly.

If you’d like, I can walk through setting up this dependency in Lightning.
Mumbai, India

AI Explanation - verified by User7893 on: May 20, 2026
j'ai pas compris donner moi exemple
Voici un exemple simple pour illustrer le processus.
Scénario:

Table Product (ProductID, ProductName, SubCategoryID)

- P1, T-shirt, 10 - P2, Jeans, 10 - P3, Casquette, 11

Table ProductSubCategory (SubCategoryID, SubCategoryName, CategoryID)

- 10, Apparel, 1 - 11, Accessories, NULL

Table ProductCategory (CategoryID, CategoryName)

- 1, Clothing
Étapes et résultats: 1) Fusionner Product avec ProductSubCategory sur SubCategoryID avec un Inner join. - Résultat: produit + sous-cat (et son CategoryID) - Colonnes: ProductID, ProductName, SubCategoryID, SubCategoryName, CategoryID - Ex. P1 ? T-shirt, 10, Apparel, 1
2) Fusionner le résultat précédent avec ProductCategory sur CategoryID avec un Left Outer join. - Résultat: garder tous les produits; ajouter CategoryName quand elle existe - Colonnes: ProductID, ProductName, SubCategoryID, SubCategoryName, CategoryID, CategoryName - Ex. P1 ? Clothing; P3 ? CategoryName = NULL (pas de catégorie)
Conclusion: Box1 = Inner, Box2 = Left Outer.
Mohammedia, Morocco

AI Explanation - verified by apereyra1128 on: May 20, 2026
Question 76:
Question 76: “Tables are made up of which of the following?”

Correct answers: A and D (records and fields)

Explanation:

A ServiceNow table is the container for data. It is made up of:

- Records (rows) – the actual data entries. - Fields (columns) – the structure that defines what data can be stored in each record (name, type, default, etc.).

Lists and forms are UI views used to display or edit table data; they are not part of the table’s fundamental makeup. For example, an Incident table stores multiple Incident records, each with fields like number, short_description, and state.

Hong Kong, Hong Kong

AI Explanation - verified by User2280 on: May 20, 2026
Question 54:
Die richtige Antwort ist C: Aufbewahrungs-/Retention-Richtlinie.

Warum das die beste Beschreibung ist:

- Eine Aufbewahrungsrichtlinie legt fest, wie lange Daten aufbewahrt werden sollen und wann sie vernichtet werden müssen, um Compliance-Anforderungen zu erfüllen und eine effiziente Datenlebenszyklusverwaltung sicherzustellen.

Warum die anderen Optionen nicht passen:

- A – Security policy: definiert Sicherheitsregeln und akzeptables Nutzungsverhalten, nicht explizit Aufbewahrungszeiträume oder Löschregeln. - B – Classification policy: definiert Datenempfindlichkeit und Handhabungsklassen, aber nicht wie lange Daten aufbewahrt oder gelöscht werden. - D – Access control policy: regelt wer Zugriff auf Ressourcen hat, nicht Retentions- oder Löschanforderungen.
Zwingenberg, Germany

AI Explanation - verified by User2159 on: May 20, 2026
Question 51:

Correct answer: C - AWS Cloud Development Kit (AWS CDK)

Why:

- The CDK is a software development framework that lets you define cloud infrastructure as code using familiar programming languages (e.g., TypeScript, Python, Java, C#). - It synthesizes your code into an AWS CloudFormation template, which is then used to provision resources. This aligns with “define cloud resources as code and provision via CloudFormation.”

Why the others aren’t correct:

- AWS CLI is a command-line tool for managing AWS, not a framework for defining infrastructure as code. - AWS Developer Center is a portal for developers, not an IaC framework. - AWS CodeStar is a project/CI/CD service, not specifically an IaC framework that provisions resources through CloudFormation.

Quick tip for exams: CDK is the framework you’d pick when you want to write code to model resources and rely on CloudFormation to deploy them.

Mumbai, India

AI Explanation - verified by User4041 on: May 20, 2026
Question 1:
The correct choices are A and B.

Azure Resource Manager templates (A): Use ARM templates to provision the VM infrastructure in a repeatable, codified way. This ensures all Windows Server 2016 VMs are deployed with a uniform base configuration and can be versioned and audited.

PowerShell Desired State Configuration (DSC) extension for Windows (B): DSC enforces a defined, desired state on each VM after provisioning, helping maintain consistent software, settings, and configurations across all servers with minimal admin effort.

Why not C or D:

Custom Script Extension (C) runs scripts, typically for one-off tasks, and isn’t ideal for ongoing, idempotent configuration management across many VMs.

Azure pipeline deployment groups (D) are about deploying applications to targets with agents, not about maintaining a uniform OS/server configuration across VMs.

Using ARM templates for provisioning plus DSC for ongoing configuration aligns with Infrastructure as Code and desired-state management to achieve uniform, low-maintenance VM configurations.
Hyderabad, India

luis on: May 20, 2026
studiyin nse4
Centro, Mexico

AI Explanation - verified by User3698 on: May 19, 2026
the entire building is just one department?
Yes. In question 37, the scenario states that one subnet must be used for the entire building, effectively treating it as a single IP domain (one department spanning all floors).

Why this matters: with about 240–320 hosts total, you need a subnet large enough to cover all of them in one network.

Calculation: a /23 subnet (512 addresses, 510 usable) provides enough room for ~320 hosts. The example would be 192.168.0.0/23 with usable hosts from 192.168.0.1 to 192.168.1.254, network 192.168.0.0, broadcast 192.168.1.255.

If there were multiple departments or a desire to separate by floor, you’d typically use multiple subnets and VLANs, but that would violate the “one subnet must be used” constraint in this question.
Seattle, United States

AI Explanation - verified by User8316 on: May 19, 2026
Question 44:

Correct answer: C and D

Why:

Path monitoring determines if a route is usable. It tests reachability (e.g., via a monitor IP). If the path is down, the route isn’t used.

When you have multiple static default routes, the router actively uses the route with the lowest metric.

The statements A and B are incorrect: path monitoring does determine usability, and the highest metric is not the one used.

Camden, United Kingdom

AI Explanation - verified by User8316 on: May 19, 2026
Question 42:

Correct answer: D (universal)

Why:

Intrazone rules match traffic only within a single zone (e.g., Inside–Inside or Outside–Outside).

Interzone rules match traffic between different zones (e.g., Inside–Outside).

Universal rules are evaluated for all traffic regardless of zone relationships, so they cover traffic between Inside and Outside, as well as traffic within Inside or within Outside.

So to have a single rule type that matches all three scenarios, you’d use a universal rule.
Camden, United Kingdom

AI Explanation - verified by User2697 on: May 19, 2026
Question 15:
Question 15 asks how to quickly revert to older versions of a Lambda function with the least amount of overhead.

Correct answer: B: Use a function alias with different versions.

Why:

AWS Lambda versions are immutable. You publish a version for each code change.

An alias is a movable pointer to a specific version (e.g., prod ? version 5).

Deploying a new version is just publishing another version; directing production traffic to the new version is as simple as updating the alias.

If you need to roll back, you re-point the alias to the previous version. This is minimal operational effort and avoids rebuilding pipelines or managing multiple deployment artifacts at runtime.

Why other options are less suitable:

A (blue/green with OpsWorks) adds complexity and tooling overhead.

C (saving old deployment packages in S3) doesn’t provide runtime switching or instant rollback.

D (CodePipeline) adds orchestration overhead; while useful, it’s more setup than the alias approach for simple rollback needs.

Tip: You can also use weighted alias routing to gradually shift traffic, enabling canary-style rollouts with even finer control.
São Paulo, Brazil

AI Explanation - verified by User3700 on: May 19, 2026
Question 357:
No. The solution as stated does not meet the goal.
Reason:

To display a validation message on the form during a synchronous plug-in, you should throw an InvalidPluginExecutionException with the message. Dynamics CRM surfaces that exception as a user-facing validation error on the form.

Throwing a “custom” exception (a user-defined exception type) may not be surfaced correctly or as a friendly form message. The built-in InvalidPluginExecutionException is specifically designed for this scenario.

How to implement:

In the plug-in (typically in the Pre-Operation stage for Create/Update), throw the message like:

throw new InvalidPluginExecutionException("Your validation message explaining how to resolve the issue.");

This will show the message on the form when the user saves, and will cancel the operation if validation fails.

Lafayette, United States

AI Explanation - verified by User8858 on: May 19, 2026
Question 4:
Question 4 asks you to evaluate a proposed cloud deployment model for deploying Azure VMs.

The proposed solution says: use Software as a Service (SaaS). Does this meet the goal of deploying Azure virtual machines?

Answer: No.

Why:

SaaS delivers fully ready-made software managed by the provider; you don’t manage the underlying infrastructure or virtual machines.

Deploying Azure Virtual Machines is an Infrastructure as a Service (IaaS) scenario, where you provision VMs and manage the OS, patches, and installed applications.

If you were deploying apps on managed runtimes without managing VMs, that would be Platform as a Service (PaaS); if you were using ready-to-use software, that would be SaaS.

In short: VMs ? IaaS. The given SaaS proposal does not meet the goal. For reference, Question 6 in the page confirms IaaS as the correct model for VM deployments.
Chandigarh, India

AI Explanation - verified by speedystates on: May 19, 2026
Question 15:
Question 15 asks how to add a user to the Docker group without changing their primary group.

Correct answer: C: sudo usermod -aG docker user

Why:

-aG appends the user to the specified supplementary group(s) without altering their primary group.

-g would change the user’s primary group, which is not what you want.

groupmod commands aren’t used to add a user to a group, and replacing the group list with -G without -a would overwrite existing groups.

The most appropriate tool here is usermod with -aG.

How to verify and apply:

Check membership: id user or groups user

Apply to current session: log out/in or use newgrp docker (or restart sessions) to reflect the new group membership.

Notes:

Ensure the user and the docker group exist.

Moorestown, United States

AI Explanation - verified by User2838 on: May 19, 2026
Question 8:
Question 8 answer: No.
Why:

The proposed solution uses several Azure AD directories (tenants). That would create multiple tenants, meaning separate admins for each division and more complex identity management, which increases administrative effort.

What to use instead (to meet the goal with minimal admin effort):

Use a single Azure AD tenant.

Segment by division with:

- Separate subscriptions (or separate resource groups) per division. - Management Groups to organize those subscriptions by division. - Fine-grained RBAC to grant division admins access only to their scope (e.g., at the subscription or resource group level). - Use Azure AD Groups for assignment of roles.

Consider Azure Lighthouse only if you truly need cross-tenant management with reduced admin overhead.

In short, a single tenant with scoped subscriptions/resource groups and RBAC provides segmentation with less administrative burden; multiple tenants would work against the “minimum admin effort” requirement.
Polokwane, South Africa

AI Explanation - verified by User4748 on: May 19, 2026
Question 72:

Correct answer: D) Audit meeting.

Why: To frequently check the strength and efficiency of the risk management process, you perform a risk audit. In PMI terms, risk audits are governance activities that evaluate whether the risk management plan is being followed, whether risk responses are effective, and whether improvements or lessons learned should be captured. An audit meeting is a common way to conduct this assessment.

Why the other options are less appropriate:

- Brainstorming session: used to identify risks, not to assess the effectiveness of the risk management process. - Stakeholder register: a project artifact about stakeholders, not a tool for evaluating risk management. - Assumption log: records assumptions, not a mechanism for auditing risk management.

Hyderabad, India

AI Explanation - verified by User6923 on: May 19, 2026
Question 1:
Here's how to understand Question 1 and why the listed answer is not the best choice.

Goal: Ensure scripts run on new VMs after deployment (automation of post-deploy configuration).

Best solution (Azure-specific): Use the Custom Script Extension (CustomScriptExtension) with the VM Agent. It lets you specify a PowerShell script stored in a storage account that the VM downloads and executes on first boot, and you can pass arguments. This is designed for post-deployment customization across many VMs.

Why the other options are weaker:

- SetupComplete.cmd in %windir%\setup\scripts: Runs during Windows setup, not after the VM is deployed and running. It’s tied to the Windows installation process rather than ongoing VM provisioning. - GPO logon scripts: Require the machines to be domain-joined and reachable at logon; not reliable for new VMs that may not be joined yet or that you want to configure automatically in a scalable way. - GPO startup scripts: Similar limitations as logon scripts; depends on domain policies and may delay or complicate provisioning. - Place scripts in a VHD: Inflexible for ongoing updates; requires rebuilding images for changes and isn’t a runtime post-deployment mechanism.

Bottom line: The correct, scalable approach is the Azure VM Custom Script Extension, not SetupComplete.cmd. The provided answer (A) is not the best choice.

London, United Kingdom

AI Explanation - verified by User5152 on: May 19, 2026
Question 8:

Answer: C

Why:

- In Salesforce, the available case statuses are driven by the active Support Process for a given case. Each process defines a subset of statuses and is linked to specific record types. If you have one process with 10 statuses for all record types, users see too many options regardless of case type. - By reviewing which statuses are needed per record type and creating separate Support Processes for each, you ensure users only see relevant statuses for the type they’re working on. This improves UX and reporting accuracy.

Why not the other options:

- A (Reduce to five globally): Impacts all case types; you may still need different statuses for different types, so this isn’t flexible enough. - B (Screen Flow to filter values): Adds complexity and isn’t the standard way to tailor statuses; it doesn’t change the underlying process-per-type logic. - D (Edit status choices on the record type): Status values aren’t controlled directly on the record type; they’re controlled by the Support Process. This option isn’t how to achieve per-type status control.
Madurai, India

AI Explanation - verified by User5152 on: May 19, 2026
Question 1:
The correct answer is Record Type (option C).
Explanation:

In Salesforce, picklist values can be defined per record type. If users see different options when uploading a custom picklist on Opportunity based on the opportunity kind, those differences are controlled by the Record Type. Each record type determines which picklist values are available for that type.

To update, you configure the picklist values for each Record Type (or edit the Record Type’s available values for the field).

What this looks like in Setup (high level):

Setup > Object Manager > Opportunity > Record Types > [Choose a Record Type] > adjust the available picklist values for the target field.

Why the other options aren’t correct for this scenario:

Fields and relationships: would change the field globally, not per record type.

Related lookup filters: unrelated to picklist options.

Picklist value sets: used to share a common set of values, but per-record-type availability is managed via the Record Type.

Madurai, India

AI Explanation - verified by User2674 on: May 19, 2026
Question 213:
Question 213 explanation:

Correct answer: D — Planned how the delivered product will be supported after its delivery.

Why: In a hybrid/T&M setup, predefine post-delivery support and defect handling. A clear support plan (roles, SLAs, costs, and how defects are addressed) prevents disputes like “free fixes” after delivery.

Why not A: Training client engineers shifts capability but doesn’t establish who pays for defect fixes or how they’re handled.

Why not B: Reviewing the quality control plan is good, but it doesn’t establish post-delivery support terms or a defect remediation process.

Why not C: A fixed-cost with free bug fixes for 1 month resembles a warranty but isn’t the most robust preventive approach for a T&M contract and can mask ongoing costs.

Practical note: include a formal post-delivery maintenance/support plan in the PM plan or contract, with clear defect definitions, response times, handover to operations, and how changes are billed.
Stara Zagora, Bulgaria

AI Explanation - verified by User1756 on: May 19, 2026
Question 34:
Question 34 explanation

Correct answer: B — Configure an Enterprise Content Delivery Network (eCDN) provider.

Why this is correct:

- Large Teams Live Events can consume a lot of Internet bandwidth. An eCDN provider caches and relays the live stream closer to attendees, reducing outbound bandwidth from your network and improving performance.

Why the other options are not appropriate:

- Microsoft Phone System: relates to telephony, not bandwidth optimization for live events. - Cloud Video Interop: used for interoperability with other video systems, not bandwidth reduction. - A SIP provider: pertains to PSTN connectivity, not event bandwidth management.

Quick notes:

- You configure the eCDN provider in the Teams admin center (Live events settings) and coordinate with your CDN vendor to route live event streams through the CDN. Monitor performance and adjust as needed.
Tashkent, Uzbekistan

AI Explanation - verified by User4486 on: May 19, 2026
Question 1:
Question 1 asks you to set up automatic labeling for Site1 documents that contain credit card numbers. The correct sequence is:

Step 1: Create a Sensitive Info Type to detect credit card numbers in documents. Purview provides built-in CC patterns, or you can create a custom one if needed.

Step 2: Create a Sensitivity Label that will be applied to content once CC data is detected. This label defines how the content is protected or marked.

Step 3: Create an Auto-Labeling Policy that uses the sensitive info type to automatically apply the sensitivity label when CC numbers are found in Site1.

Why this order:

You must first have a detection mechanism (Sensitive Info Type) before you can classify with a label.

Then you need a label to apply. Finally, you publish/link that label to an auto-labeling policy so the labeling happens automatically without user intervention.

Key terms:

Sensitive Info Type: detects patterns like credit card numbers.

Sensitivity Label: defines classification and protection for content.

Auto-Labeling Policy: automatically applies the label when the detection criteria are met.

Lagos, Nigeria

AI Explanation - verified by User4748 on: May 19, 2026
Question 4:
Correct answer: D
Why D is correct:

The blocker is on the critical path and threatens the 6-week release. The project manager should directly engage the person responsible (the designer) to share status and co-create a solution to unblock the work. This aligns with removing impediments and keeping delivery on track.

Why the other options are less appropriate:

A (meet with design manager to request an additional designer): may help, but it doesn’t address the root cause or provide an immediate path to unblock the current task.

B (ask engineer to move forward without the important feature): would risk non-compliance or quality; not acceptable given the regulatory context.

C (reconsider priority list): changing priorities doesn’t fix the blocker on the critical path and could jeopardize regulatory deadlines.

Practical follow-up after choosing D:

Document the agreed plan with the designer (what will be done, by when, and any trade-offs).

Consider if alternative design approaches or partial work can proceed while the blocker is resolved.

Update stakeholders on the status and any adjusted timeline if needed.

Hyderabad, India

AI Explanation - verified by User9181 on: May 19, 2026
what is Self-service sign-up?
Self-service sign-up is a tenant-wide feature that lets end users (and sometimes external users) create their own Azure AD accounts in your directory without an admin provisioning them.

How it works: A user can start a sign-up flow using an email address (typically in your verified domain), verify ownership, and an Azure AD user object is created in your tenant.

When it’s used: Commonly to let customers, partners, or employees join a directory without IT creating each account.

What it means for admins: You can enable or disable this feature. If enabled, new accounts can be created by users; if disabled, users cannot create new accounts themselves.

Related concepts: Distinct from self-service password reset (SSPR) and from B2B guest invites.

In your exam context, turning this off prevents contoso.com users from creating new accounts in the contoso.com tenant via self-service sign-up.
Navsari, India

AI Explanation - verified by User9181 on: May 19, 2026
Question 1:
Here’s how to understand Question 1.

Core concept: With group-based licensing in Azure AD, you can assign a license to a group rather than to individual users. The license then flows to all current and future members of that group.

Why the answer is B (Group1, Group2, Group3, Group4, and Group5): If each of those groups is eligible for group licensing (typically a security group or other supported group type), you can assign the Microsoft 365 Enterprise E5 license directly to each group. Members of those groups will receive the license automatically. The assignment is not limited to a single group—you can license multiple groups.

What the distractors imply: The license is not tied to a device (Device1) and not restricted to just one user; it’s granted at the group level to all members.

Practical takeaways:

- In the Azure portal, go to Licenses > All products > Microsoft 365 Enterprise E5 > Assign, then select the groups. - Ensure the groups are of a type supported by group-based licensing (usually security groups or Microsoft 365 groups). - You’ll manage licenses by group, not by individual users, and you can add/remove groups as needed.
Navsari, India

AI Explanation - verified by User1193 on: May 19, 2026
Question 192:
Question 192 asks which two values must be provided when creating a new WLAN on the Cisco WLC GUI.

Correct answer: C and D — SSID profile name and management interface settings.

Why:

The WLAN needs an identity to broadcast to clients, which is the SSID (often shown as the SSID profile name in the GUI). Without this, there’s no network for clients to connect to.

The WLAN also must be mapped to a dynamic/management interface (the VLAN/IP network that will carry the WLAN’s traffic). This defines how client traffic is routed and what IP subnet/VLAN the clients receive.

Why the other options aren’t required at creation:

QoS settings are optional and can be configured later.

IP address of one or more APs isn’t something you configure in the WLAN itself; APs obtain IPs via DHCP or static config and join the WLC independently.

Washington, United States

AI Explanation - verified by User1193 on: May 18, 2026
Question 7:

Answer: management

Why: In 802.11, frames are classified into three main types: Data, Management, and Control. The Association Request (sent by the station) and the subsequent Association Response are both Management frames. The Association Response is sent by the AP in reply to the station’s Association Request to join the WLAN.

What the Association Response does: it indicates whether the association was successful (Status Code) and assigns an Association ID (AID) to the station. The frame may also carry capability information and supported rates via Information Elements.

Context: Association is part of the process for a device to join a Basic Service Set (BSS) before any data traffic begins. After a successful association, the 4-way handshake (for WPA/WPA2) may occur to establish encryption keys.

Washington, United States

AI Explanation - verified by User4207 on: May 18, 2026
Question 80:
Here's how to approach Question 80.

Correct mapping:

- App1: PaaS (Platform as a Service) - App2: IaaS (Infrastructure as a Service)

Why:

- App1 requires you to modify the code. PaaS provides a development framework and managed runtime, reducing OS management while letting you focus on code. - App2 must run interactively with the server OS, meaning you need control over the OS (logging in, configuring, etc.). This is characteristic of IaaS (a VM where you manage the OS).

Why not SaaS for App2:

- SaaS is a ready-made application managed by the provider; you don’t typically interact with the underlying OS or modify the app’s code. That doesn’t meet the requirement to run interactively with the OS.
Note: The page’s shown answer for Box2 (SaaS) contradicts the requirement for App2. Based on Microsoft exam objectives, App1 should be PaaS and App2 should be IaaS.
Singapore, Singapore

AI Explanation - verified by User6303 on: May 18, 2026
Question 30:
Question 30 explanation:

Correct answer: Path (not Workflow)

Why: Path provides guided selling for opportunities. It shows stage-specific guidance, prompts, and the key fields to complete at each step, helping standardize what information Sales Reps gather and offering recommended actions or strategies at each stage.

Why the other options aren’t right:

- Workflow: automation behind the scenes (tasks, field updates, alerts) and not a visible, stage-by-stage guidance tool for reps. - Global Action: quick actions, not a guided, stage-based data entry experience. - Chatter Feed: collaboration, not data-standardization or stage guidance.
In short, Path is the feature designed to standardize required fields and provide recommendations at each sales stage on the opportunity record.
Warsaw, Poland

AI Explanation - verified by User2237 on: May 18, 2026
Question 1:
??? ?????: B.
????:

??? AWS CloudFormation ?????? Lambda ???? ???? ??????????? API Gateway ???? ???? ??? ?????????? ???? ???? ????.

???????? ????? Lambda ??????? aimmutable ????, ???????? ???? ??? ???? ?????????? ???? ??????? (versions) ????? ????.

Canary release strategy ?????? ???? ?????? ???????????????? ??????? ??????? ?????? new ??????????? ????? ????, ???????? ???? ???????? ???? ????.

??? ????????? ?????????????? ?????????? ???? Lambda ??? ??? API ???? ???? ???????? ???????? ???? ???? ????, ???????? ???? ??????????????? IaC ???????? ????? ????.

???????? ????? ??????????, canary ????? ????? ??????? ???????? 100% ?? ???? ???? (promote).

???? ???? ?????????? ????:

A: Route 53 failover ?? ???? canary ???? ?????????, gradual traffic shifting ???? ????? ????; ?????? ?????? ???????? DR ????.

C, D: Elastic Beanstalk ????? OpsWorks ?? serverless-????? ? ??? ??????? ???????????? ???? ?????.

????????: B ?? ????????, IaC-??????, canary-??? testing ??? ?????????? ??????????? ????? ????? ???.
Pune, India

AI Explanation - verified by User7657 on: May 18, 2026
give snowflake documentation url to confirm this
Here are the Snowflake docs you can consult to confirm cloning behavior and temporary tables:

https://docs.snowflake.com/en/sql-reference/sql/clone.html — Snowflake cloning overview (describes how clones share data and preserve object properties)

https://docs.snowflake.com/en/user-guide/tables-temporary.html — Temporary Tables documentation (covers scope and behavior of temporary tables)

These pages explain that clones inherit the source object’s properties, so a clone of a TEMPORARY table remains temporary.
Bhubaneswar, India

The Raj on: May 18, 2026
The braindumps really prepare me for the Net+ test! We all passing this year! The nwe ai feature is helpful gng
Moorestown, United States

sai ganesh sajja on: May 18, 2026
Here what i found was most helpful
Hyderabad, India

Kola on: May 18, 2026
This platform was so helpful to the success of my CS0-003 exams now certified
Nuneaton, United Kingdom

AI Explanation - verified by User9084 on: May 18, 2026
Question 5:
Answer: Box 1 – Append Queries as New; Box 2 – Disable loading the query to the data model.
Why:

You have two separate Customer tables from two databases with the same schema and you want one combined table. Use an append to stack rows from both sources.

What to do (Power Query Editor):

Use Append Queries as New to create a new query that combines the two Customer queries.

Result is a new query that contains all rows from both sources (you can rename it as the combined Customer table).

Why Box 2:

To minimize model size, don’t load the intermediate source queries into the model. Set them to Disable Load. They’ll still refresh, but their data will be used only as sources for the final appended query.

Effect on refresh:

Scheduled refresh still works because the intermediate queries refresh in the background, and the final appended query provides the loaded data to the model. This approach reduces memory usage while keeping data up-to-date.

Mohammedia, Morocco

AI Explanation - verified by User4880 on: May 18, 2026
Question 4:
For Question 4, the correct choice is No.
Explanation:

Software as a Service (SaaS) delivers software to you as a ready-made application managed by the provider (you just use it, e.g., Office 365). You don’t manage underlying infrastructure.

Deploying Azure Virtual Machines is an example of Infrastructure as a Service (IaaS). You control the OS, installed software, patches, and configuration.

If you were deploying an app on a managed platform, you’d be in Platform as a Service (PaaS) (e.g., Azure App Service), not VMs.

So the proposed solution (SaaS) does not meet the goal; the appropriate model is IaaS.
Marauli, India

AI Explanation - verified by User4201 on: May 18, 2026
Question 12:
Question 12 — The correct answer is AWS Service Catalog.

Why this fits: AWS Service Catalog lets an organization create and manage a catalog of IT services and infrastructure as code templates (for example, CloudFormation templates) that are approved for use. It provides governance through controlled publishing, versioning, constraints, and approvals, ensuring deployments come from a standardized, compliant set of templates.

How it works in practice: Users deploy environments or services by selecting products from the catalog. Each product can be tied to an IaC template and governed with access controls and approval workflows, helping enforce policy and reduce ad-hoc deployments.

Why the other options don’t fit as well:

- AWS Resource Explorer is for discovering and viewing resources, not governing templates or deployments. - AWS Organizations manages accounts and policies across an organization, not IaC template governance. - AWS Systems Manager focuses on operational management (inventory, patches, run commands), not centralized governance of IaC templates.
Multan, Pakistan

Cisco 700-905 Exam Questions
Cisco HyperFlex for Systems Engineers (Page 2 )

QUESTION: 1

QUESTION: 2

QUESTION: 3

QUESTION: 4

QUESTION: 5

700-905 Exam Discussions & Posts (Share your experience with others)

Cisco 700-905 Exam Questions Cisco HyperFlex for Systems Engineers (Page 2 )