CloudBees CCJE Exam Prep
Certified CloudBees Jenkins Engineer (CCJE) (Page 5 )

• The application stores data on Amazon EBS volumes, so the encryption should be applied directly to those volumes.
• EBS encryption uses AWS-managed cryptographic operations and is designed to provide encryption at rest with minimal performance impact.
• The volumes are created during initial deployment, so they can be configured as encrypted when provisioned.

• B: Moving data to an encrypted S3 bucket changes the storage design and does not encrypt the EBS data the application uses.
• C: A custom encryption algorithm adds application overhead and is unnecessary.
• D: Ephemeral disks are temporary storage and can lose data when instances stop or terminate. Encrypting only the AMI’s root volume does not protect data stored elsewhere.

• Early units show relatively large time savings.
• Later units still take less time, but the reduction becomes progressively smaller.
• The curve therefore becomes flatter as production approaches 256 units.

• B: The reduction is not constant; learning normally diminishes over time.
• C: Time does not reduce at an increasing rate.
• D: A steady state may eventually be reached, but the question concerns the first 255 units while learning is still occurring.

• WPA3: Secures wireless traffic but does not normally verify whether someone has paid.
• PSK: A shared Wi-Fi password gives access to anyone who knows it; it cannot easily validate individual receipts.
• IEEE 802.1X: Provides user/device authentication, commonly through an authentication server, but is excessive and not designed specifically for a simple receipt-based guest-access workflow.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• nmap - 10.11.1.130 — a network scanning command; mitigated with controls such as firewalls, monitoring, or access restrictions.
• “Click this link to get your free gift card.” — a phishing or social-engineering message; addressed through user awareness, email filtering, and authentication controls.
• “Your connection is not private.” — indicates a certificate or TLS validation problem; addressed by correcting the certificate or secure-connection configuration.

• Key-based authentication: Provides an endpoint secured with API keys.
• Real-time REST access: Supports online inference through an HTTP/REST endpoint.
• No VM vCPU quota consumption: Microsoft hosts and manages the underlying infrastructure, so your subscription’s VM quota isn’t used.

• Batch: Intended for asynchronous, large-volume processing rather than real-time requests.
• Self-hosted container: You manage the infrastructure and typically need compute resources and quota.
• Standard: This is not the clearest deployment type for the stated requirements; the specific Foundry option is serverless API.

• Deterrent control: The signs warning people they may be filmed discourage unauthorized or malicious behavior. They may prevent incidents by influencing behavior, but their primary purpose is to deter.
• Detective control: The CCTV system monitors and records activity so security personnel can identify suspicious or unauthorized actions.

• Preventive: Blocks or prevents an incident, such as a lock or access-control system.
• Corrective: Fixes or restores systems after an incident.
• Directive: Tells people what they must do, typically through policies or procedures.
• Compensating: Provides an alternative control when the preferred control cannot be used.

• Document feeder: A scratch, dirt, or debris on the feeder glass or rollers can create a line on every scanned image.
• Pickup rollers: Move paper through the printer; they would not normally create a scanner-only line.
• Corona wire: Affects toner charging and would cause defects on printed output.
• Drum assembly: Also affects printed pages, so faxes and computer print jobs would show the line too.

• Authentication: Verifies who the user is.
• Authorization: Determines what the authenticated user is allowed to access.
• Accounting: Records login activity and resource usage.

• CIA: Confidentiality, integrity, and availability—the core security objectives.
• ACL: Access Control List; rules that permit or deny traffic or access.
• PEM: A format and standard commonly associated with encoded certificates and keys.

• Accept: Acknowledge the risk without taking additional action.
• Transfer: Shift the risk’s impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact, such as by implementing controls.
• Avoid: Eliminate the activity or situation that creates the risk.

• Creating and training machine-learning models
• Testing and evaluating models
• Deploying models as usable endpoints

• A: Describes an update-set conflict, not a Dictionary Override.
• B: Describes a configuration item or change concept.
• C: Describes an approval or workflow activity.

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized activity. They do not physically prevent the activity, but they may influence behavior.
• Detective control: CCTV detects or records activity so security personnel can identify incidents and investigate them later.

• Preventive: Stops an incident from occurring, such as a locked door.
• Corrective: Restores systems after an incident, such as backups.
• Directive: Instructs people what to do, such as security policies or warning instructions.
• Compensating: Provides an alternative control when the preferred control cannot be used.

• Crowd-sourced evaluation: Requires recruiting and managing many evaluators.
• Human-worker evaluation: Provides human judgment but requires coordination, labeling instructions, and quality control.
• RLHF: Is a training and alignment process, not simply a low-overhead model comparison method.
• Automatic model evaluation: Quickly evaluates outputs using predefined toxicity or quality metrics with minimal manual effort.

• A local network gateway represents an on-premises network—its address space and VPN device information—for an Azure Site-to-Site VPN connection.
• It does not control which connection types are allowed between Azure web servers and database servers.
• It is also unnecessary when both server groups are in the same Azure virtual network.

• Menerjemahkan soal ke bahasa Indonesia.
• Menyebutkan jawaban yang benar.
• Menjelaskan alasan jawaban tersebut.
• Memberi tahu jika kunci jawaban yang tersedia tampaknya keliru.
• Menjelaskan istilah teknis penting dalam soal.

• An Adj-SID does not necessarily need manual configuration.
• It can often be dynamically allocated by the router, although manual configuration may also be possible.
• The adjacency information is advertised through the IGP, such as IS-IS or OSPF.

• It is identified by an Adj-SID.
• It represents a particular adjacency of a node.
• Its meaning is generally local to the advertising node; unlike a Node-SID, it is not a globally reusable instruction across the network.

• Design Studio > Emails ? create an email-template folder
• Design Studio > Landing Pages ? create a landing-page-template folder
• Add the relevant assets to each folder
• Right-click the folder and choose Share Folder
• Select the destination workspaces

• File hashes
• Strings and metadata
• Binary or code structure
• Known malicious patterns
• Embedded indicators or signatures

• Sandbox: Executes the file in an isolated environment; useful for observing behavior, but usually slower.
• Network traffic analysis: Examines communications generated by a system or application, not the file itself.
• Package monitoring: Tracks software packages or installations and is not the primary method for examining malware signatures.

• Economy: Obtaining inputs at the lowest appropriate cost.
• Efficiency: Making the best use of resources, such as staff, money, and equipment.
• Effectiveness: Achieving the intended objectives or outcomes.

• To identify the number of errors: select Column quality. It shows the percentage and count of Valid, Error, and Empty values for each column.
• To resolve errors: use the appropriate error transformation:

• netstat -tuln can show listening TCP ports.
• If the web service is not listening, or is bound only to 127.0.0.1, remote browsers cannot connect even though the server responds to ping.

• traceroute: Tests the path to the server, but ping already confirms basic reachability.
• tcpdump: Useful for detailed packet analysis, but it is more appropriate after checking whether a service is listening.
• arp: Helps troubleshoot local IP-to-MAC resolution, not an application-layer web connection.

• Who owns security risks and decisions
• Who is responsible for implementing controls
• Who reports security performance to management
• How security responsibilities align with business objectives

• B — Compliance with audit requirements: Governance may support compliance, but audit compliance is not its main objective.
• C — Monitoring security incidents: This is an operational security activity, not the central purpose of governance.
• D — Creation of tactical solutions: Governance establishes direction and oversight; tactical solutions belong to management and operational teams.

• state preserves the client’s original context, such as the specific idea URL the user requested.
• The portal sends that value in the OAuth authorization request.
• Salesforce returns it after authorization, allowing the portal to redirect the user to the original idea rather than the Ideas home page.

• Render thousands of animation frames
• Generate product images in multiple sizes
• Apply filters or transformations to a large image collection
• Produce visual effects for a video

• Complete MFA, or
• Securely change their password

• Identity Protection: evaluates user and sign-in risk and can trigger remediation.
• Privileged Identity Management (PIM): manages temporary, just-in-time access to privileged roles; it does not automatically require password changes for risky sign-ins.

• Transport and handling
• Storage and warehousing
• Refrigeration
• Shelf-stacking or replenishment
• Other costs directly attributable to product P

• Data source: Folder
• Transformation: Remove the Content column (or keep only the file-metadata columns)

Why

• File name
• Extension
• Date modified
• Folder path
• Content — the binary contents of the file

• Domain controllers, because the requirement specifically excludes them. However, note that both member servers and domain controllers run Windows Server, so OS targeting alone cannot distinguish them unless the targeting option allows selecting the relevant server role/version. In the usual exam interpretation, target the applicable server OS category.
• Client computers, because they run a client Windows operating system.

• Domain: Targets membership in a domain, not the computer’s operating-system type.
• Security Group: Would require creating and maintaining a group containing all member servers, increasing administrative effort.
• Environment Variable: Not designed to reliably identify member servers.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity there is a strong indicator of compromise.
• DNS sinkholes: Redirect malicious or suspicious DNS requests to a controlled destination. This can identify infected systems attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it is not an attacker-detection method.
• CI/CD: Automates software development, testing, and deployment.
• Threat modeling: Identifies potential threats and weaknesses before or during system design; it does not directly detect an active infiltrator.
• Data obfuscation: Makes information harder to understand, but does not identify attackers.

• Active remediation actions role in Microsoft Defender for Endpoint

• Security Reader role in Azure AD/Entra ID

• Security Administrator is broader than necessary because it grants extensive security-management permissions, violating least privilege.
• Compliance Data Administrator is intended for compliance data management, not Defender for Endpoint remediation approvals.

• IaaS: você gerencia a VM e o sistema operacional.
• PaaS: o Azure gerencia a infraestrutura; você se concentra no aplicativo.

• ROUGE-N: matching word sequences, such as unigrams or bigrams
• ROUGE-L: matching the longest common subsequence
• ROUGE-Recall: how much of the reference content appears in the generated summary

• F1 score: A general classification metric based on precision and recall; not specifically designed for summarization.
• Perplexity: Measures how well a language model predicts text, rather than how closely a generated summary matches a reference.
• Fréchet Inception Distance (FID): Typically evaluates similarity between generated and real images, not text.

• Box 1: No — The rule requires user.department to equal Engineering. Engineer does not match, so User1 is not in AU1. Admin1 cannot reset User1’s password.
• Box 2: No — Admin1’s role is scoped to AU1 and cannot manage users outside that AU.
• Box 3: Yes — Admin2 is a Global Administrator and can reset User3’s password.