A customer’s smartphone has been overheating frequently and becoming unresponsive since installing an OS update. A technician has already performed a soft reboot of the device. Which of the following should the technician perform NEXT? (Choose two.)

Roll back the OS update
Update the PRL
Force stop running applications
Enable airplane mode
Perform a factory reset
Run application updates
Reset network settings

Answer(s): A,F

Show Answer Next Question

QUESTION: 42

Joe, a user, cannot read encrypted email messages on a corporate smartphone, but he has been able to read them in the past. A technician restarts Joe's smartphone, but the issue remains. The technician deletes the corporate email account and has Joe re-add it, verifying all settings are correct. Despite these steps, the issue persists.

Which of the following is MOST likely causing the issue?

The certificate is expired.
The TPM is bad.
The phone is not encrypted.
The incorrect mail server is selected in settings.

Answer(s): A

Show Answer Next Question

QUESTION: 43

A user moves a file from one NTFS disk to another NTFS disk. Which of the following describes the changes to the file permissions?

The file has both the source and destination permissions
The file keeps the source permissions
The file permissions have to be set manually
The file receives the destination permissions

Answer(s): D

Show Answer Next Question

QUESTION: 44

A technician has enabled port security on a switchport.

Which of the following BEST describes the effect this will have?

Devices must match a list of allowed MAC addresses before accessing the network.
Devices need to conform to the policies set forth by the MDM software.
Data loss prevention software will be monitoring for data exfiltration on the port.
A firewall is actively monitoring the network traffic using heuristic analysis.

Answer(s): A

Show Answer Next Question

Download PDF Next Page

Viewing page 32 of 64
Viewing questions 125 - 128 out of 701 questions

Post your Comments and Discuss CompTIA 220-1002 exam prep with other Community members:

Comments:

Name:

220-1002 Exam Discussions & Posts
220-1002 AI Verifications

anon on: March 04, 2025
Anyone use the free version to help them pass the test? Can't really afford the pdf version right now.
UNITED STATES

senan on: March 02, 2025
salam bu ne suallardi bele
AZERBAIJAN

HCipher on: February 12, 2025
i can certify for anyone planning to take the exam that these questions are up to date and representative of the actual exam, but i strongly urge you to read, and understand the material as comprehensively as you could ensuring you learned as best as you possibly could. before learning the dumps, as acquiring the certificate without any knowledge gained is a futile endeavor for your career progression and the likes
PORTUGAL

The Professor on: December 21, 2024
Passed the A+ today. Many of these questions are valid but be careful to read your questions first because the answer may change based on the conditions in the question
UNITED STATES

CompTIA on: December 03, 2024
These questions are valid but you can't rely on them. We do not use these questions no more. On god.
UNITED STATES

Jury on: April 10, 2024
i just passed my A+ core 2 today. 4 of my PBQ was exactly the same with this practice test. it6 is really worth understanding all the questions here. big help!! thank you so much!! Aiming for my Sec+ now before 601series expires in July
Anonymous

Marc on: March 14, 2024
This exam dumps is valid in US as of yesterday. I can say that it helped a lot with my exam. A lot of relevant topics.
UNITED STATES

Jacob on: February 12, 2024
This exam is one of the hardest ones. You cannot pass without using these exam dumps. Just an FYI to others, majority of these questions are in the exam.
Italy

GetGo on: August 11, 2023
It was pretty easy to pass this exam with the help of this exam dumps PDF. Free version is not complete. I paid for the full version with 50% sale.
Anonymous

AI Explanation - verified by User3676 on: July 06, 2026
Question 27:

Answer: No

Why: Azure MFA is used for authenticating users (multi-factor authentication), not for encrypting or protecting administrative credentials during deployment. To meet the goal of encrypting credentials during automation, use a secrets management solution such as:

- Azure Key Vault to store credentials securely as secrets. - A Managed Identity (or a service principal) for the deployment process to access Key Vault and retrieve secrets without hard-coding them in scripts. - Ensure encryption in transit (TLS) and at rest (Key Vault encryption).
Bengaluru, India

AI Explanation - verified by User6165 on: July 12, 2026
Question 6:

Correct answer: Outbound Email.

Why: In Flow Designer, trigger types are the things that start a flow: Application, Record, Schedule, and Topic. Outbound Email is not a trigger; it’s an action type you can use inside a flow to send an email when the flow runs. So it’s the option that is NOT a trigger type.

Hyderabad, India

AI Explanation - verified by User5592 on: July 22, 2026
Question 4:

Answer: D) Shadow IT

Why: Shadow IT is when employees use unsanctioned tools or bypass IT controls (like the VPN) to access services, often without IT oversight. It’s an internal behavior, not an external attacker’s activity.

Not these:

- A) Espionage — covert info gathering by attackers. - B) Data exfiltration — unauthorized data transfer, usually by an attacker. - C) Nation-state attack — attack by a state-sponsored actor.

Quick note: This creates risk due to lack of visibility and control. Mitigations include a defined approved-tools list, enforcing VPN usage, device management, and continuous monitoring.

Vila Velha, Brazil

AI Explanation - verified by User7034 on: July 01, 2026
Question 2:

Correct answer: C. The flow is a before save flow.

Explanation:

- When a flow is configured as a record-triggered flow with the run type set to “Before Save,” Salesforce restricts the Flow Builder toolbox to a limited set of elements (e.g., Assignment, Decision, Get Records, Loop) because the flow runs before the record is saved and there’s no UI or post-save actions involved. - If it were a Screen Flow, you would see a Screen element in the toolbox. The status (inactive/active) doesn’t change the toolbox; it affects deployment/editability, not the available elements in a before-save flow. - So the limited toolbox indicates you’re editing a Before Save flow, not a screen flow or a different activation state.
Bengaluru, India

AI Explanation - verified by User7449 on: July 14, 2026
Question 9:

Answer: Sign up Azure Active Directory (Azure AD) Privileged Identity Management (PIM) for Azure AD roles.

Why: You must enable/activate PIM for your tenant before you can manage or discover privileged roles. Discovery of privileged roles is something you do after PIM is enabled, not the first step. The other options (consent, discovering resources) are either part of later setup or unrelated in this context.

Redmond, United States

AI Explanation - verified by User8952 on: June 27, 2026
Question 17:
Answer: A – Anomaly Detector

Why: The goal is to identify unusual values in time-series data (IoT readings) to predict failures. Anomaly Detector is a Azure Cognitive Service specifically designed to detect anomalies in time-series data, making it the right choice.

Why not the others:

- Cognitive Search is for indexing and searching content, not detecting anomalies in time series. - Form Recognizer extracts data from forms. - Custom Vision is for image-based tasks.

How to approach at scale: Treat each sensor stream as its own time series (you have 5,000 series). Feed each series to Anomaly Detector to flag deviations that may indicate impending maintenance needs.

Kolkata, India

AI Explanation - verified by kapilthawani551 on: July 25, 2026
Question 48:
For question 48, the two efficient and scalable methods are:

ProductSearchModel.getProductSearchHits() — option C

ProductSearchHit.getRepresentedProducts() — option B

Why:

ProductMgr.queryAllSiteProducts() (A) queries every product in the site, which is heavy and not scalable for large catalogs.

Category.getProducts() (D) retrieves all products in a category; this can be slow for large categories.

Using the search model and hits (B and C) leverages the search index, supports paging, and avoids scanning the entire catalog, making it more scalable.

Note: The provided answer key on that page lists C and D, but based on SFCC concepts, B and C are the correct, scalable choices.
Kota, India

AI Explanation - verified by User5104 on: July 11, 2026
Question 86:
Question 86 asks which service improves network performance by sending traffic through the AWS worldwide network infrastructure.

Answer: AWS Global Accelerator (option C)

Why:

It routes internet-facing traffic over the AWS global network to the nearest healthy endpoint, reducing latency and jitter.

It uses static Anycast IP addresses and continuously monitors endpoint health, automatically steering traffic away from unhealthy endpoints.

Why the others aren’t correct:

Route table controls routing inside a VPC, not global network optimization.

AWS Transit Gateway connects VPCs and on-prem networks, but doesn’t optimize traffic paths across the AWS network.

Amazon VPC provides the virtual network itself, not a traffic-optimization service.

Dakar, Senegal

AI Explanation - verified by juris.siksna on: June 27, 2026
Question 411:
Question 411 asks what two actions a project manager should take after the security department flags regulatory requirements.
Answer: The two correct actions are B and E.

B: Ask the security department for details about regulations. Why: You need precise, testable requirements to understand what must be complied with. Without specifics, you can’t analyze impact or plan properly.

E: Ask the team members to analyze the impact of including this regulation. Why: Impact analysis (cost, schedule, scope, risk) informs whether and how to implement the regulation and helps with prioritization and planning.

Why the other options aren’t the best immediate actions:

A: The product owner owns the backlog; without specifics, adding requirements is premature. The PM should gather details first (B) and analyze impact (E) before backlog actions.

C: Prioritizing with stakeholders is important, but you should first understand the regulation and its impact rather than asking for priority without analysis.

D: Instructing the team to include it in the next iteration skips the necessary impact analysis and refinement.

In short, gather specifics from security, then perform an impact analysis before altering backlog or sprint plans.
Riga, Latvia

AI Explanation - verified by User9085 on: July 21, 2026
Question 23:
Question 23 asks which consideration determines how much information can fit into one prompt when building a generative AI app with Bedrock.

Correct answer: B) Context window.

Why: The context window is the number of tokens the foundation model can process in a single inference. It sets the maximum length of the combined input (prompt) and the model’s output. A larger context window allows more content to be included in one prompt.

How to use: Check the FM’s context window value and ensure your prompt length plus the desired completion stays within that limit. If needed, summarize or split input across multiple prompts.

Why the other options aren’t correct:

- Temperature controls randomness, not prompt length. - Batch size affects throughput (how many prompts are processed at once), not per-prompt capacity. - Model size relates to capacity and quality but does not directly fix how many tokens fit in a single prompt.

Quick tip: Verify the specific FM’s context window for Bedrock, since different models have different token limits.

Kwai Chung, Hong Kong

AI Explanation - verified by User8963 on: July 26, 2026
Question 13:
Question 13 asks which are the key architecture domains.

The standard Enterprise Architecture domains are: Business, Data, Application, Technology (BDAT).

Option analysis:

A: Business, strategy, application and technology — includes business and application/tech but uses “strategy” instead of data.

B: Zachman, TOGAF, Cobit, and Heath architectures — names frameworks, not domains.

C: Business, data, infrastructure and technology — has business, data, and technology; lacks a distinct application domain (uses “infrastructure” instead).

D: Process, database, software and technology — covers data (database), application (software), and technology, but omits business.

Notes:

The four BDAT domains (business, data, application, technology) is the conventional model you should study.

None of the options perfectly lists all four BDAT domains. The closest are C (if you map infrastructure to technology) and D (data/application/technology but no business).

The answer key here (D) seems questionable; the core concept to know is BDAT.
Nuenen, The Netherlands

AI Explanation - verified by User8274 on: July 13, 2026
Question 5:

Correct answer: D and E (Permanent table and Materialized view)

Why: Time Travel and Fail-safe apply to permanent objects and materialized views. If a permanent object or a materialized view is dropped, you can recover it within the Time Travel retention period; after that, Snowflake’s Fail-safe provides a further, limited recovery window.

Why the others are incorrect:

- A (View): Regular views aren’t listed as recoverable in this context; Time TravelRecovery is associated with permanent objects and materialized views. - B (Transient table) and C (Temporary table): Transient/temporary objects do not generally support Time Travel recovery after drop.
Panipat, India

AI Explanation - verified by User7882 on: July 16, 2026
Question 1:

The question asks which Azure support plans allow you to open new support requests.

Key concept:

- Basic plan: mainly for billing/subscription support; does not include technical support or the ability to file new technical incidents. - Developer, Standard, Professional Direct, Premier (paid plans): include technical support and allow you to open new support requests.

Therefore, the correct choice is the plan(s) other than Basic (i.e., Developer, Standard, Professional Direct, Premier). If the provided key lists only one option as correct (A), it may be incomplete or misleading—the official plans page shows that Basic does not meet the requirement, while the paid plans do. See: https://azure.microsoft.com/en-us/support/plans/

Noida, India

AI Explanation - verified by User9941 on: July 24, 2026
Question 12:
Question 12 asks you to judge the accuracy of the underlined statement about inventory adjustment journals.
Key points about the statement:

What it says: you can add a cost when you adjust inventory, and that cost is posted automatically to a specific GL account.

Reality: yes, you can adjust both quantity and value via an inventory adjustment journal. The cost on the journal line affects the inventory value.

Important nuance:

The general ledger postings are not arbitrary. the actual accounts used are determined by your item posting group and the system’s posting definitions. In practice, the adjustment debits/credits the appropriate inventory-related accounts (e.g., Inventory asset and a related offset such as an adjustment or COGS account) based on configuration.

So, the cost change does not go to a single “manual” GL account you pick per line unless your posting setup maps to that account.

Bottom line:

The concept is true (you can adjust cost and have GL impact), but the claim that it posts to a single, specific GL account is oversimplified—the accounts come from your posting configuration.

Bengaluru, India

AI Explanation - verified by pewy26 on: July 05, 2026
the question is to pick afrom the list: .... is used to identify, hold, and export electronic information that might be used in an investigation. The answer according to the site is costumer lockbox, but i incline more towards ediscovery
The correct choice is eDiscovery.
Why:

eDiscovery is the process used to identify, hold (preserve), and export electronically stored information (ESI) that might be used in legal investigations.

It encompasses search, preservation (holds like In-Place Hold or Litigation Hold), and export of results for review or production.

Customer Lockbox is different: it governs customer approval for Microsoft engineers to access your data during a support incident, not for legal holds or exporting information for investigations.
So the statement about identifying, holding, and exporting ESI aligns with eDiscovery, not Customer Lockbox. If you’d like, I can explain eDiscovery features (Content Search, Holds, Exports) in more detail.
Amsterdam, The Netherlands

AI Explanation - verified by N0T123496giraffe on: July 14, 2026
Question 322:

The page you shared does not list domain names for individual questions, so I can’t confirm the exact domain from the question text alone.

My best guess: this question relates to change management and configuration control, which typically maps to Governance, Risk, and Compliance (GRC) in Security+ mappings. It also touches on Operations concepts, but the governance aspect fits best.

If you want, I can walk through why this mapping makes sense or help map other questions you’re curious about.
Mableton, United States

AI Explanation - verified by User9262 on: June 29, 2026
Question 487:
The correct answer is C (21).

The FTP control plane uses a TCP connection to port 21 on the server. This channel carries the FTP commands (USER, PASS, LIST, RETR, STOR, etc.) and responses.

The data plane (actual file transfer) uses a separate connection. In active mode it typically uses port 20 on the server side, while in passive mode the server selects a dynamic high port for data transfer.

The other ports listed are for different protocols: 23 (Telnet), 22 (SSH), and 24 is not the FTP control port.

So, for the question about the FTP control plane port, you should choose 21.
Bekasi, Indonesia

AI Explanation - verified by User8952 on: June 27, 2026
Question 4:
Question 4: Correct answer is C: Form Recognizer.
Why this fits:

Form Recognizer is built for automated data extraction from forms/receipts. It can identify and extract key data (e.g., vendor, transaction total) and return structured data with relationships, bounding boxes, and confidence.

It includes prebuilt models for receipts, invoices, etc., which minimizes development effort since you don’t need to train from scratch.

Why the others aren’t correct:

A. Custom Vision: for image classification/detection, not structured data extraction from forms.

B. Personalizer: for personalized recommendations, not receipts processing.

D. Computer Vision: provides general OCR, but not the specialized, structured extraction you get with Form Recognizer (no ready-made receipt model to pull vendor/total reliably).

Bottom line: use Form Recognizer to quickly and accurately extract top-level receipt data with minimal development.
Anonymous

AI Explanation - verified by User5264 on: July 19, 2026
Question 5:
Question 5 is asking which Data view options you need to identify the min and max values for each column in the Dataflow results.
Key ideas:

To get min/max per column, you need column profiling. That’s provided by enabling the column profile.

To actually see those min/max values, you should show the column profile in the details pane, and you also need the details pane itself enabled so you can view it.

Recommended selections:

Enable column profile (B)

Show column profile in details pane (C)

Enable details pane (E)

Why not the others?

Show column value distribution (D) shows distribution shape but isn’t required to get min/max.

Show column quality details (D) deals with data quality metrics, not min/max.

Note: The provided key on the page lists B and E, but to view min/max in the UI, you typically need all three: B, C, and E. If your exam system shows a different combination, the concept is still: enable profiling, display it in the details pane, and ensure the details pane is visible.
Copenhagen, Denmark

AI Explanation - verified by User2211 on: July 14, 2026
Question 6:

Answer: The correct first step is to define a new SOC role for Company A in Google SecOps.

Why this is right:

- It uses role-based access control to enforce data boundaries: Company A’s analysts can only access case data originating from Company A’s telemetry. - It allows reuse of existing playbooks: once the appropriate role is in place, you can grant access to the same playbooks without recreating them. - It minimizes effort: no need to stand up a new tenant/environment or manage separate identities beyond the Company A group.

Why the other options are less suitable as the first step:

- Acquire a second SecOps SOAR tenant: heavy, adds duplication and management overhead; not needed initially. - Provision a new service account for Company A: insufficient for isolating case data or enforcing cross-tenant boundaries. - Create a Google SecOps SOAR environment for Company A: unnecessary if you can achieve isolation and reuse via RBAC.

Practical note:

- Implement the new SOC role and attach it to Company A’s user group in your identity provider. - Verify data separation by testing access to a mix of Company A vs. another company’s cases, and confirm playbooks can be run by the new role.
Bengaluru, India

AI Explanation - verified by raushankumar6343 on: June 27, 2026
Question 10:
Question 10 asks how to enable active learning for a natural language model (LUIS).
Correct answer: C — Add log=true to the prediction endpoint query.
Why:

Active learning relies on collecting real user utterances to improve the model. The log parameter, when set to true, enables logging of user queries from the prediction endpoint so you can review and label them for retraining.

The other options don’t enable active learning:

- A) show-all-intents=true is about displaying intents in results, not collecting training data. - B) Speech priming is unrelated to active learning. - D) Sentiment analysis is a separate capability and not needed to enable active learning.
Practical note:

This is based on the guidance to “log user queries to enable active learning” in the LUIS docs. Ensure you have the proper permissions and review/logged utterances can be used to periodically retrain and improve accuracy.

Kolkata, India

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 285:
Question 285 asks how to write an ACL that permits packets with an ACK in the TCP header.

Correct entry: access-list 110 permit tcp any any eq 21 established

Why: The Cisco ACL keyword established matches TCP segments that belong to an already established connection, i.e., segments that have the ACK bit set. This is exactly the behavior you want for TCP ACK packets (after the initial SYN/handshake). The destination port 21 is shown, but the key factor is the established keyword.

Why other options are not right:

- A uses tcp-ack, which is not a standard, portable match in IOS ACLs and may be device-specific. - B/C differ only by ACL numbering; the essential concept is using established to match ACK-containing segments. - D uses ip and would not specifically target TCP ACKs.
Tip: If you want to permit all ACK-containing TCP segments regardless of port, you could use something like permit tcp any any established.
Plano, United States

AI Explanation - verified by User3312 on: July 17, 2026
Question 34:

Answer: C — 192.168.0.0/25 as summary and 192.168.0.0/27 for each floor

Why:

- Each floor needs 24, 29, 28, and 22 hosts. A /27 provides 30 usable addresses, which fits all floors without waste. - Four /27 subnets can fit inside a single /25: 192.168.0.0/27, 192.168.0.32/27, 192.168.0.64/27, 192.168.0.96/27. - Summarizing these four /27s yields 192.168.0.0/25 (covers 192.168.0.0–127), which is the most efficient common route that includes all floor subnets. - Other options waste addresses or don’t provide enough hosts (e.g., /28 per floor is too small for 24–29 hosts; /23 or /24 summaries would be coarser than needed).
If you want, I can walk through the exact per-floor subnet addresses and how they map within 192.168.0.0/25.
New Delhi, India

AI Explanation - verified by User8952 on: June 27, 2026
Question 19:
Likely approach for Question 19:

Presence detection (is the learner there?): Use the Face API (Vision) to detect faces in the video stream. You can also leverage head pose/emotion to infer attention.

Identifying each learner: Use Speaker Recognition to identify who is speaking from the audio feed (voiceprints enrolled for each learner).

Why this fits:

Video + audio: presence is best inferred from video facial detection, while identifying who each learner is can be done via audio with speaker identification.

Minimal development: these two services provide out-of-the-box capabilities for detection and identification without building custom models.

Notes:

If the hotspot options instead map identity to the Face API, you could enroll each learner in a Face API PersonGroup and use the Identify function. The pairing above emphasizes using audio for identification to complement the video presence check.

Kolkata, India

AI Explanation - verified by User7449 on: July 14, 2026
Question 13:

Answer: No (the solution proposing an Application Security Group does not meet the goal)

Why: An Application Security Group is used to simplify NSG rules for VMs, not to enable or configure service endpoints. The requirement is to allow the VM and its containers to reach Azure Storage and Azure SQL via the service endpoint, which is achieved by properly configuring the service endpoints and related networking (NSG and DNS), not by creating an ASG.

What to do instead to meet the goal:

- Ensure the subnet has service endpoints enabled for both Storage and SQL. - Configure NSG rules to allow outbound traffic to the Storage and SQL endpoints (typically Storage over port 443; SQL over port 1433, depending on how you access them). - Ensure DNS resolution for the storage account and SQL server is working within the VNet (consider private DNS zones if using private endpoints). - On the VM, prepare Docker (install Docker, pull images, etc.) and verify connectivity to the resources before deploying containers.

Quick takeaway: Don’t rely on an ASG for this scenario. Focus on enabling service endpoints and appropriate NSG/DNS configuration to allow the VM and its containers to reach Storage and SQL.

Redmond, United States

AI Explanation - verified by User9198 on: July 28, 2026
Question 103:

The correct option is B: AWS Storage Gateway.

Why: The scenario requires backing up on-prem data to AWS without changing existing backup workflows. AWS Storage Gateway provides a hybrid storage solution; specifically, the Tape Gateway emulates a physical tape library, allowing your existing backup software to write to virtual tapes that are stored in AWS (in S3 or S3 Glacier). This lets you back up 10 TB to the cloud while preserving current backup workflows and on-prem infrastructure.

How it would work: Deploy a gateway appliance or VM on-site, connect your tape-based backup software to the virtual tape library, and start writing to virtual tapes. The data is then archived in AWS, freeing up local storage.

Why the others aren’t suitable:

- Amazon EBS is cloud block storage and doesn’t fit on-prem backup workflows. - Amazon ECS is a container service, not a backup solution. - AWS Lambda is serverless compute, not a storage/backup service.

Quick tip: If you weren’t using tape, File Gateway could be another option for file-based backups; Tape Gateway is the right pick for tape-based workflows.

Busan, South Korea

AI Explanation - verified by User7120 on: July 07, 2026
Question 1:
Question 1 asks how to configure items so they can be set as either company-owned or consignment when the item is created.
What the options mean and why they matter:

Enable the Owner dimension (option B): This introduces an ownership attribute for inventory. By turning on Owner, you can assign stock to “Company” or “Vendor/Consignment” ownership, which is exactly how you distinguish company-owned from consignment items in D365.

Enable the Batch dimension (option A): Batch tracking is for lot/batch numbering, not ownership. It doesn’t help you model ownership (consignment vs. company-owned), so it’s not required for this objective.

Costing model choices (options C and D): The costing method (e.g., Moving average vs. Standard costing) is a separate setting from ownership. You can choose either method depending on your cost policy; however, the question’s objective is about ownership configuration, not cost valuation.

Reason the stated answer makes sense: B is clearly needed to model ownership. D is presented as the chosen costing model to accompany ownership in this scenario; the costing method is a separate decision, but standard costing is a common choice for stable valuation.
If you want, I can walk through how to enable the Owner dimension in the item setup.
Chennai, India

AI Explanation - verified by User2219 on: July 15, 2026
Question 3:
Here’s why Question 3 is answered as C.

The requirement: SQL authentication cannot be used for any databases on Server1, and the solution must be enforced centrally at the server level.

Correct choice (C): Enable Microsoft Entra-only authentication for Server1.

- This turns on Entra/Azure AD authentication only at the server level, which disables all SQL authentication for every database hosted on that server and enforces the policy centrally at the server scope.

Why not the others:

- A (Configure a Microsoft Entra administrator for Server1): Adds an Azure AD admin but does not disable SQL-auth or enforce authentication centrally. - B (Enable a managed identity for Server1): Not about authentication method for clients; doesn’t disable SQL logins. - D (Remove SQL logins from DB1): Removes some logins at the database level, but does not enforce server-wide or centrally; other databases would still be affected differently.
Key concept: Azure SQL server-level setting of Entra-only authentication ensures all databases under Server1 rely solely on Azure AD for authentication, meeting the “centrally enforced” requirement.
Islamabad, Pakistan

AI Explanation - verified by User9994 on: July 14, 2026
Question 2:

RPO and RTO definitions:

- RPO (Recovery Point Objective): you can tolerate losing up to 2 hours of data. - RTO (Recovery Time Objective): you must restore service within 10 minutes.

Why B and D meet these goals:

- B. Amazon Aurora Global Database in two Regions: provides cross-region replication with very small lag. The 2-hour RPO is easily met because data is replicated across regions quickly. In a disaster, you can promote the secondary region to master, achieving a short RTO. - D. Two-region deployment with Route 53 failover and Auto Scaling Groups: ensures the app tier can switch to a healthy region quickly. Route 53 health checks direct traffic to the healthy region, and pre-provisioned ASGs maintain capacity, meeting the 10-minute RTO.

How they complement each other:

- Data layer (B) handles RPO, ensuring recent data is available in the failover region. - Compute layer (D) handles RTO, ensuring application endpoints are routed to a ready, scaled region quickly.

Quick tips:

- Use a low Route 53 TTL for fast DNS failover. - Regularly test cross-region failover and promotion processes.
Johannesburg, South Africa

AI Explanation - verified by tjgalti on: July 05, 2026
Question 30:

Correct concept: Use a packet-filter to block traffic from the offending IP to the configuration utility, without impacting other users.

Why D (Packet Filter) is appropriate:

- Packet filters can block traffic based on source IP, destination port, and protocol. - You can drop only the admin/configuration access path (e.g., management port on the Self IP) for that one IP, leaving all other admin/users untouched.

Why not the others:

- SSH: Not targeted to the config utility specifically and would affect SSH access broadly. - IP allow list: Forcing an allow-list would restrict access to many legitimate admins and is not scalable for just one bad IP. - Port lockdown: Global port control, not IP-specific; could disrupt legitimate admin traffic. - Device trust: Not a mechanism for blocking by source IP.

Quick approach (conceptual):

- Identify the unwanted source IP. - Create a Packet Filter that matches src IP = bad IP (and the management port/protocol) and set action to drop. - Attach/apply it so only management traffic from that IP is blocked, preserving access for others.
Thalwil, Switzerland

AI Explanation - verified by User7866 on: July 20, 2026
Question 51:

Correct answer: A — The degradation of a service.

Why: A service request is a formal request from a user for something that is pre-approved and routine (e.g., provisioning a laptop, replacing a toner cartridge). Those are typical service request actions. The degradation of a service, however, is an incident: it describes a problem affecting service quality or availability and is handled by Incident Management (and possibly Problem Management), not as a standard service request.

Quick note on the other options:

- B (replacement of a toner cartridge) and C (provision of a laptop) are classic service requests. - D (a complaint about a support team) is not a service request either; it would be handled through complaint/feedback channels, not as a service request.
Kuching, Malaysia

AI Explanation - verified by User9494 on: July 02, 2026
Question 21:

Correct answer: A) AWS Direct Connect

Why: AWS Direct Connect provides a dedicated network connection from your on-premises data center to AWS. It uses a private, physical link (often via a colocation location) rather than the public Internet, giving more consistent performance and potentially lower data transfer costs.

How it compares to other options:

- VPC peering: connects two VPCs, not on-prem networks. - AWS VPN: uses IPsec over the public Internet; not a dedicated private line. - Amazon Route 53: DNS service, not a network connection.

Quick notes:

- Can use private or public virtual interfaces to reach VPCs or AWS public endpoints. - Often complemented with a VPN for redundancy or additional failover paths. - Supports high bandwidth (1 Gbps to 100 Gbps) and is a common choice for hybrid cloud setups.
Mumbai, India

AI Explanation - verified by User5172 on: July 24, 2026
Question 9:
Here’s how to approach Question 9 (the drag-and-drop):

Mapping:

- website hosting ? PaaS - a virtual machine that runs Linux ? IaaS - document storage that uses OneDrive for Business ? SaaS

Why:

- Website hosting on a managed platform (e.g., Azure App Service) abstracts OS and runtime management, so you focus on code—this is PaaS. - A Linux VM is an infrastructure you control (OS updates, software installed, patches), while the cloud provides the VM hardware—this is IaaS. - OneDrive for Business is a ready-to-use software service managed by the provider—this is SaaS.

Quick note: If you were to host a website on a VM, it would be IaaS; if you used a platform service instead of a VM, it would be PaaS. CaaS (containers) isn’t shown here.

Hyderabad, India

AI Explanation - verified by User3880 on: July 21, 2026
Question 36:
Waterfall is a traditional, linear project management and systems development approach. Key points:

It is a sequence of distinct phases that flow one after another (requirements ? design ? implementation ? verification ? maintenance).

Requirements are defined up front and changes are costly; the project often requires formal sign-off before moving to the next phase.

It emphasizes heavy documentation and minimal iteration after a phase is completed.

In the context of question 36, the BA is using a waterfall approach to capture requirements. The next step before building the solution is to obtain approval and sign-off on the requirements from stakeholders. This ensures everyone agrees the requirements are accurate, complete, and feasible, and authorizes the build to proceed, helping prevent scope creep and miscommunication.
Buenos Aires, Argentina

AI Explanation - verified by sivatheanalyst007 on: July 27, 2026
Question 17:
Here’s why Question 17’s answer is E.

Correct answer: only new data added to the eventhouse (option E).

Why: When you enable OneLake availability for the eventhouse, OneLake starts syncing data going forward. It does not automatically backfill or copy over data that already exists in the eventhouse before the enablement.

What that means in practice: Any data added to the eventhouse after you enable OneLake will appear in OneLake (and be visible from OneLake file explorer). Pre-existing data in the eventhouse stays there unless you perform a separate backfill/copy operation outside the standard OneLake enablement.

How to verify: add a small new dataset to the eventhouse after enabling OneLake availability, then check OneLake to confirm the new dataset appears.

Summary: Enabling OneLake availability is incremental for new data; it won’t copy historical data by default.
Singapore, Singapore

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 338:
Question 338 asks about the Cisco DNA Center Intent API. The two correct characteristics are:

northbound API

business outcome oriented

Rationale:

The Intent API is exposed to higher-level applications (northbound) to drive business outcomes, not device-level details.

It is not device-oriented, not southbound, and it is intent-based (not procedural).

Plano, United States

AI Explanation - verified by User9954 on: June 28, 2026
Question 62:
The correct answer is D — RAID 6.
Reason: RAID 6 uses dual parity, so the array can tolerate up to two drives failing simultaneously without data loss. This provides higher fault tolerance than RAID 5, which can survive only a single drive failure. For comparison: RAID 0 has no redundancy, and RAID 1 tolerates one failed drive per mirrored pair, not multiple simultaneous failures across the array.
Paris, France

AI Explanation - verified by User9758 on: July 25, 2026
Question 147:
Question 147 asks which enterprise security capability best detects employees accessing systems and data unrelated to their duties.

Correct answer: UBA (A)

Why: UBA (User Behavior Analytics) analyzes user activity, builds baselines of normal access patterns, and flags deviations (e.g., accessing sensitive projects not related to the user’s role). This insider-threat detection is exactly what the scenario requires.

Why not the others:

- EDR focuses on endpoint malware/host threats, not broad user access behavior. - NAC controls device/network access, not ongoing monitoring of which resources a user accesses. - DLP prevents data leakage but doesn’t primarily detect who is accessing data or deviating from normal access patterns.
Tip: Look for the option that monitors and flags unusual user behavior rather than focusing on devices, data content, or endpoint threats.
Virginia Beach, United States

AI Explanation - verified by User9156 on: July 24, 2026
Question 29:

The correct answer is D: All of the above.

Why:

Snowflake Web Interface (UI): You can create and manage Virtual Warehouses from the UI (resize, suspend/resume settings, etc.).

SQL commands: You can create and alter warehouses with DDL like CREATE WAREHOUSE and ALTER WAREHOUSE.

Data integration tools: ETL/ELT tools can create/manage warehouses by connecting to Snowflake and issuing the appropriate commands or using their config to specify a warehouse.

If you’d like, I can show quick example commands or steps for each interface.
Chennai, India

AI Explanation - verified by User1990 on: July 11, 2026
Question 36:
Question 36 explanation:

Correct answer: A) Zero-day vulnerability

Why:

Routine vulnerability assessments look for vulnerabilities that are already known and cataloged (e.g., CVEs, misconfigurations). A zero-day vulnerability is, by definition, not known yet, so it cannot be reliably discovered by standard vulnerability scans.

Other options:

- Kernel flaw: can be found if it’s already known and in databases, or via kernel-specific tests. - Buffer overflow: can be detected by fuzzing and static/dynamic analysis. - File and directory permissions: can be identified through permission scanning and configuration review.
Note: In real-world practice, anomaly detection or threat hunting could surface unknown issues, but routine vulnerability assessments target known vulnerabilities.
San Diego, United States

AI Explanation - verified by User3804 on: July 11, 2026
Question 1:
Correct answer: A — “Commits are made on a branch that can have a linked pull request.”
Why:

commits are changes made on a branch. A PR is created to merge that branch into another branch (usually the main branch) and can be linked to that branch.

The PR “tracks” the commits on the branch. As you push new commits to the branch, the PR automatically includes them.

You don’t have to wait for a PR to exist before making commits—you can commit before or after opening a PR. You can open the PR with some commits and continue pushing more commits to the same branch, and the PR will update.

Why the other options are incorrect:

B: Commits can be made before or after a PR is created (not only after).

C: Same idea as B—commits aren’t limited to only before a PR.

D: Commits are made on a branch, not directly on a pull request; the PR references that branch for merging.

Amman, Jordan

AI Explanation - verified by User2066 on: July 12, 2026
Question 6:
Question 6 asks how to diagnose why opportunities are taking longer to close.

A) Dashboard of month-over-month trend of lead conversions: Not directly about closing time. It shows lead-to-opportunity conversion trends, not the cycle time of opportunities.

B) Report on campaign ROI: Marketing effectiveness, not internal sales cycle length.

C) Report on the discount approval time for quotes: Helps show if slow discount approvals are delaying quotes and closes.

D) Dashboard of opportunity stage duration: Reveals how long opportunities stay in each stage, identifying bottlenecks in the sales process.

Therefore, the two tools to leverage are C and D. They together pinpoint where delays occur (specific stages) and whether approval workflows (like discounts) are causing longer close times.
City Of Muntinlupa, Philippines

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 269:

The correct component is the Cisco Stealthwatch system.

Why:

Stealthwatch provides network visibility and security analytics by collecting and analyzing flow data (NetFlow/IPFIX) across the network.

It can map flows to user identities and devices (user and flow context), enabling context-aware threat detection and behavior analytics.

Other CTD components serve different roles: Firepower for firewall/threat prevention, AMP for endpoint protection, and WSA for web security; none of these are primarily focused on user/flow context analysis like Stealthwatch.

Plano, United States

AI Explanation - verified by raushankumar6343 on: June 27, 2026
Question 61:

Correct answer: A — Run the Bot Framework Emulator.

Explanation:

The Bot Framework Emulator is the local testing tool for bots built with the Bot Framework SDK. It lets you validate the bot running on your own machine before you connect to any channels or deploy to Azure.

How it helps: you simulate conversations, inspect messages and payloads, and verify dialog flows and logic against your local bot endpoint.

Typical flow: run the bot locally (e.g., on http://localhost:3978/api/messages), open the Emulator, configure a new bot with that endpoint (and AppId/AppPassword if needed), then start a chat to validate behavior.

Why not the other options:

- Compose is for bot design/testing environments but not the standard local runtime validator before connecting to channels. - Registering with Azure Bot Service is for deployment to Azure, not local validation. - Windows Terminal is just a shell, not a testing tool.
Kolkata, India

AI Explanation - verified by User4745 on: July 01, 2026
Question 111:
Question 111: What provides centralized control of authentication and roaming in an enterprise network?

Answer: B — Wireless LAN Controller (WLC)

Explanation:

In enterprise WLANs, you typically deploy lightweight APs (LWAPs) that connect back to a central WLC. The WLC enforces security policies, handles user authentication (e.g., via 802.1X and RADIUS), and coordinates client roaming between APs.

Roaming is enabled because the WLC manages handoffs, key distribution, and airtime policies across all APs.

The lightweight APs rely on the WLC for centralized control; a firewall or switch alone does not manage WLAN authentication or roaming.

Harare, Zimbabwe

AI Explanation - verified by User8952 on: June 27, 2026
Question 47:
Question 47 explanation:

Correct sequence: Change the domain to General (compact) ? Retrain ? Export.

Why:

- The compact domain is the one that supports exporting so you can run the model offline (edge deployment). Non-compact/general domains don’t export to local devices. - Changing the domain changes the model architecture, so you must retrain after the domain switch to generate a valid exported model.

Steps you would perform:

- In the Custom Vision portal, go to project settings and change the Domain to General (compact), then save. - Click Train to retrain the model with the new domain. - Once training finishes, choose Export and select the desired format (e.g., TensorFlow/ONNX) for offline use, then download.

Key takeaway: To export for an offline network, you must switch to a compact domain, retrain, and then export.

Kolkata, India

AI Explanation - verified by User2971 on: June 27, 2026
Question 119:
Here’s the gist of Question 119 and why the chosen option (B) matters.

Topic: Spanning Tree Protocol (STP) port-priority on a link with Link1 (copper) and Link2 (fiber). The fiber link should be the primary forwarding path, but on SW2 the fiber port is currently blocked.

Key concept: For a given network segment, STP selects a designated port—the port on the segment that will forward toward the segment. The decision is made using the Port ID (Port Priority + Port Number). The lower Port ID wins; if costs to the root are equal, the port with the lower Port ID becomes designated.

What the fix does: You influence which end of the Link2 segment becomes the designated port by adjusting the Port Priority on the ends of that link.

- The correct choice is: Enter spanning-tree port-priority 32 on SW1 (the end of Link2 opposite SW2). Lowering SW1’s port-priority on that link makes SW1’s Port ID smaller than SW2’s on that link, which causes the designated/forwarding role to align with the desired path.

Why the SW2 change alone didn’t suffice: Simply changing SW2’s port-priority doesn’t guarantee SW1’s end won’t still win the designated role, depending on root paths and costs. Adjusting SW1’s end to a lower value ensures the intended designated-port outcome.

In short, by lowering SW1’s port-priority on the Link2 interface, you steer which end becomes the designated port for that link, resolving the blocked fiber path.
Plano, United States

AI Explanation - verified by User4159 on: July 24, 2026
Question 57:

Answer: C — Spot Instances

Why: The workload is a test environment that can be interrupted and does not need to run continuously. Spot Instances let you bid on unused EC2 capacity at a deep discount, making them the most cost-effective option for interruptible workloads.

Why not the others:

- On-Demand Instances: Flexible but more expensive over time; not the most cost-efficient for interruptible tests. - Reserved Instances: Require a long-term commitment (1–3 years) and are not suited for short-lived or interruptible testing. - Dedicated Instances: Ensure physical isolation and can be costlier; unnecessary for a test environment.

Quick tips:

- Plan for interruptions (checkpoint progress, save state). - Use orchestration to handle interruptions (fallback to On-Demand if spot capacity is unavailable, or use Spot Fleet/Auto Scaling to diversify instance types). - Be aware of the two-minute interruption notice and design the test to finish or checkpoint before termination.
Gdansk, Poland

AI Explanation - verified by User7070 on: July 17, 2026
Question 5:
Question 5 asks if the proposed solution (PaaS) is appropriate for deploying Azure virtual machines.

Correct answer: No (B).

Why:

To deploy and manage Azure VMs, you use Infrastructure as a Service (IaaS). IaaS provides the actual virtual machines you configure, patch, and control.

Platform as a Service (PaaS) abstracts infrastructure and OS management and is used for hosting applications (e.g., web apps) on managed runtimes, not for provisioning and managing individual VMs.

So the goal (deploying VMs) is not met by using PaaS; you should use IaaS instead.
Delhi, India

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 290:

Correct answer: C — target 192.168.100.82 in the URI.

Why: The show-control-connections output indicates the client (Postman) is not correctly reaching the vManage, i.e., the REST API calls are going to the wrong device. If Postman is pointing to a non-vManage IP, authentication will fail even if credentials are correct. By updating the URI to use the vManage IP (192.168.100.82), the request reaches the correct controller and authentication can proceed.

Why the other options are less suitable:

- Use basic authentication: This doesn’t fix the endpoint mismatch; authentication method isn’t the root cause here. - Change the port to 12446: There’s no evidence the port is the issue; the endpoint is the problem. - Restart the vSmart host: The issue shown points to vManage reachability, not vSmart; rebooting won’t fix the endpoint being contacted.

Concept note: In Cisco SD-WAN, REST API authentication must target the correct vManage controller. If you’re seeing a control connection issue, verify the API base URL/host first before changing auth methods or ports. If you want, I can walk through how to verify the target in Postman.

Plano, United States

AI Tutor 👋 I’m here to help!

CompTIA 220-1002 Exam Actual Questions (Retired and replaced with 220-1201) (Page 32 )

QUESTION: 41

QUESTION: 42

QUESTION: 43

QUESTION: 44

CompTIA 220-1002 Exam Actual Questions
(Retired and replaced with 220-1201) (Page 32 )