CompTIA CAS-005 Exam Prep
CompTIA SecurityX (Page 25 )

• True Positive (TP): A real security threat occurs and the monitoring system correctly detects it and raises an alert.
• False Negative (FN): A real security threat occurs but the detection system misses it, so no alert is generated.

• False negatives are dangerous because they allow breaches to go undetected.
• True positives enable timely incident response.

• Improve detection coverage (EDR/UEBA, DLP, SIEM tuning).
• Regularly test detection rules and perform red-team/blue-team exercises.
• Ensure comprehensive logging and cross-domain visibility so multi-source signals can be correlated.

• Increase/decrease the number of epochs: Changes how long training runs, but does not reuse a pre-trained model.
• Unsupervised learning: Trains from unlabeled data and does not specifically address adapting an existing model.

• IaaS: You deploy and manage virtual machines, operating systems, disks, and networking. Azure manages the physical datacenter and host infrastructure.
• PaaS: Azure manages the operating system and runtime so you can focus on deploying applications, such as with Azure App Service or Azure Functions.
• SaaS: You consume a complete, provider-managed application.

• Voice devices ? VLAN 10
• Data devices ? VLAN 20
• SVI for VLAN 10 ? 192.168.10.1
• SVI for VLAN 20 ? 192.168.20.1

• A: Describes a physical trunk interface, not an SVI.
• B: An SVI can provide management access, but that is not its primary definition here.
• D: SVI does not compensate for insufficient physical ports; it is a logical interface.

• Correct answer: Day 3 (Option B)

• Why: In Engagement Studio, when the program is paused, the prospects’ wait times are also paused and do not count down. They resume from the same point when the program restarts. Here, the prospect was at day 3 of a 5-day wait when paused, so they resume on day 3 after the 1-day pause.

• Compensating control: The server is end-of-life, so it may no longer receive security patches or support. Placing it on a restricted VLAN provides an alternative layer of protection by reducing who can access it and limiting its exposure.
• Technical control: VLAN segmentation and access control lists (ACLs) are technology-based mechanisms that enforce network access restrictions automatically.

• Managerial: Policies, procedures, and governance—not network configuration.
• Physical: Locks, guards, or barriers.
• Corrective: Restores systems after an incident.
• Detective: Identifies suspicious activity rather than restricting access.
• Deterrent: Discourages behavior but does not enforce access rules.

• Correct answer: S3 Versioning

• Why the other options aren’t suitable for this protection:

• Quick tip: For enhanced protection, enable Versioning (and consider related features like Object Lock for write-once scenarios in specific compliance cases).

• Idioma: “Responda em português.”
• Tamanho: “Responda em até três frases.”
• Formato: “Use uma lista com três recomendações.”
• Objetivo: “Recomende produtos com base nas necessidades do cliente.”

• Mudar o tamanho do LLM: pode alterar capacidade e custo, mas não garante idioma ou respostas curtas.
• Aumentar a temperatura: aumenta a criatividade e a aleatoriedade; não controla diretamente o tamanho ou idioma.
• Aumentar o Top K: permite considerar mais tokens prováveis, aumentando a variedade; também não é o mecanismo principal para controlar idioma ou comprimento.

• The legacy system creates a signed JWT assertion.
• Salesforce validates the assertion using a certificate configured on a Connected App.
• Salesforce issues an access token for the integration user.
• No refresh token is required; the system can request a new access token when needed.

• Web Server Flow: normally uses a client secret and authorization/refresh tokens.
• Username-Password Flow: requires storing Salesforce credentials and is discouraged for integrations where stronger options are available.
• User Agent Flow: intended for user-interactive applications, not unattended server-to-server processing.

• Failed login attempts
• The account being targeted
• The source user or system
• Time and frequency of attempts

• Two-factor authentication: Helps prevent unauthorized access, but does not primarily detect the employee’s attempts.
• Firewall: Controls network traffic; it generally does not monitor individual login attempts.
• Intrusion prevention system (IPS): Can detect certain network attacks, but this scenario is best addressed through authentication and audit logging.

• Disabling GPS: Affects location services, not email connectivity.
• Configuring 4G usage only: Does not enable international data access and could prevent connectivity if 4G is unavailable.
• Connecting using a hotspot: Could provide data, but it is not the most direct solution and depends on another network or device.

• Use private connectivity from a cloud provider
• Set up SSO for federated authentication

• Private connectivity—such as a cloud provider’s private endpoint—keeps Snowflake access within the company’s private network path instead of exposing access over the public internet. This fits the VPN/VDI requirement.
• SSO for federated authentication allows Snowflake users to authenticate using the credentials already managed by the company’s identity provider—the same identity system used for VDI—eliminating separate Snowflake passwords.

• Tri-Secret Secure protects encryption keys; it does not provide private network access or credential reuse.
• A proxy Snowflake account outside the VPN conflicts with the requirement that Snowflake have no internet visibility and is not the normal solution for federated login reuse.

• Reusing features across different models and teams
• Consistent feature definitions
• Managing feature versions and metadata
• Using features for both training and inference

• SageMaker Data Wrangler: Prepares and transforms data; it is not primarily a shared feature repository.
• SageMaker Clarify: Helps detect bias and explain model predictions.
• SageMaker Model Cards: Documents models, including intended use, risks, and evaluation results.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity and usually does not provide dedicated file-upload malware scanning. It is generally detective rather than preventive.
• C. Load balancer: Distributes traffic among servers and improves availability; it does not inspect documents for malware.
• D. WAF: Helps block web-application attacks such as SQL injection, command injection, and XSS. Although a WAF may inspect upload requests, malware detection in PDF files is more directly addressed by antivirus or content-scanning functionality.

• Geo-redundant storage (GRS) replicates data to a secondary Azure region, but the secondary copy is normally unavailable for read access.
• RA-GRS provides geo-replication and read-only access to the secondary region, satisfying all requirements.
• Zone-redundant storage (ZRS) replicates data across availability zones within the same Azure region, not separate geographic regions.
• Locally redundant storage (LRS) keeps copies within a single datacenter or region and does not provide geographic resiliency.

• R-squared (R²): mede quanto da variação dos valores reais é explicada pelo modelo. É mais usado em regressão, não em classificação.

• Accuracy (acurácia): mede a proporção de previsões corretas em relação ao total. É adequada para a classificação de imagens da questão.

• RMSE (Root Mean Squared Error): mede o tamanho médio dos erros entre valores previstos e reais, penalizando erros maiores. É usado principalmente em regressão.

• Learning rate (taxa de aprendizado): controla o tamanho dos ajustes feitos pelo modelo durante o treinamento. Não é uma métrica de avaliação; é um hiperparâmetro.

• Numerical flexibility: Adjusting the number of employees, such as using temporary, part-time or contract staff.
• Temporal flexibility: Varying when employees work, such as through flexitime, overtime or different working hours.
• Shift system flexibility: Changing work patterns or shift arrangements; it is not specifically about moving between tasks.

• Leadership and stakeholder commitment
• Business capability and skills
• Organizational culture
• Availability of resources
• Ability to manage and sustain change
• Impact of the proposed transformation

• How ready the organization is
• Which areas require urgent attention
• How difficult each issue may be to resolve
• Risks that could affect implementation

• A: Places the assessment in Phase B and refers vaguely to creating views; this is not the prescribed technique.
• B: An Implementation Factor Assessment and Deduction Matrix is not the primary TOGAF technique described for business transformation readiness.
• D: A Business Scenario helps identify requirements and stakeholder concerns, but it is not the main technique for assessing organizational readiness.

• Context: You’re configuring a Windows Autopilot deployment profile (Profile1) for Windows 11 devices. The hotspot asks you to pick the correct behavior for two statements based on the profile’s settings.

• Box 1: “can modify the desktop settings only for themselves”

• Box 2: “Cortana settings” with options like computer name, keyboard layout, etc.

1. Ingestion Lambda receives requests from API Gateway and places messages in an SQS queue.
2. Processing Lambda is triggered by the queue and loads records into Aurora PostgreSQL.

• Decoupling: API request handling is separated from database loading.
• Buffering: SQS absorbs bursts when incoming traffic exceeds the database’s processing capacity.
• Controlled concurrency: Configure the SQS-triggered Lambda’s concurrency and batch size to avoid overwhelming Aurora or exhausting database connections.
• Automatic retries: Messages that fail processing can return to the queue and be retried. A dead-letter queue can capture persistent failures.
• Lower operational effort: The solution remains serverless and avoids managing EC2 servers or Kubernetes clusters.

• A: EC2 and Tomcat add server-management overhead.
• B: DynamoDB/DAX would require changing the database model and does not solve the Aurora ingestion design.
• C: SNS is useful for notifications and fanout, but SQS is better for durable buffering and backpressure in this producer-consumer workflow.

• A — conformant: Incorrect because one explicit requirement is violated.
• B — consistent: “Consistent” is not sufficient where the implementation contradicts a mandatory specification. The RPC mechanism is covered by the architecture, and the implementation differs from it.
• C — consistent: Incorrect reasoning: the RPC mechanism does have a defined architectural requirement, so conformance must be assessed.
• D — non-conformant: Correct because the implementation fails to follow the specified RPC/threading requirement.

• Assign a Teams license to a user — Licenses are assigned through the Microsoft 365 admin center, Microsoft Entra ID, or PowerShell.
• Deploy the Teams client — The Teams admin center manages Teams policies and apps, but it is not the primary tool for deploying the desktop client.
• Prevent users from creating teams — Team creation depends on controlling the creation of Microsoft 365 groups, generally configured through Microsoft Entra ID and PowerShell rather than directly in the Teams admin center.

• Customers access the portal without needing a full Dynamics 365 license.
• They submit case information through portal forms.
• The submitted data is stored in Dataverse tables, such as the Case table.
• Security is controlled using web roles and table permissions, so customers can access only appropriate records.

• Dynamics 365 Connector — connects apps to Dynamics 365 data but is not the portal’s underlying data platform.
• Microsoft SharePoint — useful for documents and collaboration, not the standard case-management data source for portals.
• Microsoft Azure Storage — stores files or other data, but is not the native portal business-data platform.

• Primary and core nodes: Use On-Demand Instances because the workload is business-critical. These nodes manage the cluster and store/process HDFS data.
• Task nodes: Use Spot Instances in an instance fleet. Task nodes are suitable for interruption because they do not hold essential cluster data and can be replaced or diversified across instance types.
• Terminate the entire cluster after processing: The job runs only about six hours each morning, and EMRFS stores data in Amazon S3. Keeping the cluster running for the rest of the day would waste money.

• A: Using Spot for primary and core nodes risks interruption of the critical cluster.
• C: All On-Demand is reliable but unnecessarily expensive; terminating the cluster helps, but Spot task nodes provide greater savings.
• D: Leaving primary and core nodes running after the task finishes continues to incur costs. Savings Plans also are less appropriate for this intermittent workload.

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• Multi-factor authentication
• A secure password change for users whose credentials may be compromised

• Ablauf: Er wird in der gleichen Transaktion ausgeführt, bei der z. B. ein Datensatz erstellt oder aktualisiert wird. Der Benutzer wartet, bis der Workflow abgeschlossen ist.
• Stufen: Kann vor dem Vorgang (pre-operation) oder nach dem Vorgang (post-operation) laufen.
• Zweck: Sofortige Validierung oder Anpassung von Daten, ggf. auch das Verhindern eines Vorgangs, wenn Bedingungen nicht erfüllt sind.

• Automatisierte Flows (Power Automate, automatisierte/ Background Flows) laufen asynchron im Hintergrund, nachdem der Trigger erkannt wurde, und blockieren den Benutzer nicht.

1. Determine which host was infected first—the originating host.
2. Decide whether each other host is clean or infected based on communication and event logs.

• Compare timestamps and find the earliest suspicious event.
• Look for the host that initiated the malicious connection, file transfer, exploit, or command—not merely a host that later received traffic.
• Follow the timeline through the firewall:

• A host is likely infected if it both receives suspicious activity and then initiates related malicious traffic.
• A host may be clean if the firewall blocked the connection and there is no evidence of execution or follow-on communication.

• A vulnerability scanner automates discovery of known vulnerabilities and misconfigurations across systems. It can contribute to a supply-chain assessment.
• A penetration test actively attempts exploitation and is usually limited to an agreed scope.
• SCAP standardizes vulnerability and configuration assessment data; it is not the analysis itself.
• Illumination tool is not a commonly defined CompTIA Security+ term.

• The user authenticates with the external Identity Provider.
• Salesforce receives the SAML assertion.
• Salesforce uses attributes in that assertion—such as username, email, first name, last name, and profile/community information—to create the user during the first login.
• On later logins, Salesforce updates or uses the existing user record.

• On-the-fly provisioning is a general phrase; the Salesforce capability being tested is specifically JIT provisioning.
• Salesforce APIs would require a separate integration and provisioning process.
• Identity Connect is designed primarily to synchronize users from an identity directory, not to create users at the moment of their first SAML login.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Program and project management
• Risk management
• Cloud financial management
• Data governance
• Portfolio management

• Sustainability
• Performance efficiency
• Reliability

• The correct setting to configure is the Enrollment Status Page (ESP) profile.
• Why: ESP tracks the enrollment progress and logs during Autopilot provisioning. You can enable log collection within the ESP policy so that, if ESP times out, the user can collect and share the logs with support.
• Optional enhancement: In the ESP policy (or the Autopilot diagnostics settings), you can enable:

• Automatic enrollment settings: control how devices auto-enroll, not log collection.
• Windows Autopilot deployment profile: controls deployment steps but not ESP log collection.
• Device configuration profile: applies settings but doesn’t provide ESP log collection mechanics.

• OpenID Connect (OIDC) is an authentication layer built on OAuth 2.0.
• It returns an ID token, normally a JWT containing identity claims such as the user’s subject, name, email, or other permitted attributes.
• The wellness application can consume those claims without needing a separate user-information call.

• JWT Bearer Token Flow: intended for server-to-server authorization and does not primarily provide an end-user ID token.
• Web Server Flow: is an OAuth authorization-code flow. It can be used with OIDC in some implementations, but “Web Server Flow” alone does not specifically guarantee an ID token.
• User Agent Flow: describes an OAuth flow, not the identity protocol itself.

• Correct answer: C. AWS CloudFormation

• Why: CloudFormation lets you define infrastructure as code via templates (JSON or YAML). You can create a single template that describes multiple AWS resources and reuse it to deploy consistent stacks across environments. Templates can be parameterized and stored for repeated deployments. Other options (Marketplace, AMI, OpsWorks) don’t provide reusable deployment templates in the same way.

• BCP: Maintains essential business operations during and after disruption. It is broader than IT recovery, but the question focuses on restoring the destroyed data center.
• Communication plan: Defines how the organization communicates with staff, the public, and other stakeholders.
• IRP: Handles security incidents such as malware, unauthorized access, or data breaches—not physical disaster recovery.

• The files are stored in a document library, which is exposed through the SharePoint Folder connector.
• The connector returns file metadata, including Folder Path, Name, and Content.
• In Power Query, filter Folder Path so only files in the manufacturing reports folder are retained.
• You can then combine the remaining Excel files because they all have the same structure.

• SharePoint List is for SharePoint lists, not document-library files.
• Combine & Load combines files immediately, before you filter to the required folder, and may include unwanted files.
• Transform gives you the opportunity to filter the file list first, which is more efficient and targeted.

• Manage multiple organizations from one hierarchy.
• Enterprise-wide policies, including repository visibility, forking, and GitHub Copilot policies.
• Centralized identity and access management, such as SAML SSO, SCIM provisioning, and—where applicable—Enterprise Managed Users.
• Centralized billing and licensing, including organization and Copilot seat management.
• Enterprise audit log, which aggregates activity across organizations.
• Security and compliance oversight, such as organization security visibility and enterprise-wide controls.
• Enterprise support and account management features, depending on the plan.

• Organization: manages its own repositories, teams, members, and local policies.
• Enterprise: governs multiple organizations and can enforce policies across them.

• IKE: Negotiates security parameters for IPsec VPNs; it does not identify switch ports.
• VLAN: A logical network segmentation method, not a discovery protocol.
• netstat: Displays local network connections and listening services, but cannot identify the physical switch or port.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• prompt: the input or instruction given to the model
• completion: the desired response

json 
{"prompt":"Summarize this customer complaint.","completion":"The customer reports a delayed shipment."}

• B: A .txt file containing CSV-style lines is not automatically a valid fine-tuning dataset. The required structure and format must match the selected Bedrock model.
• C: Provisioned Throughput provides dedicated inference capacity; it does not fine-tune a model.
• D: Journals and textbooks might support domain adaptation or pretraining, but they do not provide the prompt-to-answer examples typically required for supervised fine-tuning.

• You provision the virtual machine.
• You manage the guest operating system, applications, and configuration.
• Azure manages the physical servers, datacenter, and underlying virtualization infrastructure.

1. Selling price per unit: $750
2. Required annual return:

1. Required profit per unit:

1. Target cost per unit:

• B — Increase provisioned concurrency for Lambda

• D — Refactor the Lambda functions

• E — Use Amazon RDS Proxy

• The VM keeps its configuration, disks, IP settings, and associated resources.
• The operation may cause downtime.
• You cannot guarantee that it will move specifically to Host2; Azure selects the new host.
• Update management is for update configuration, not host relocation.
• Moving to another subscription does not move the VM to a different physical host.
• Usage location is unrelated to VM placement.

1. Remote access to a Windows PC
2. Full chat and optional game-console functions

• Windows Remote Desktop (RDP) uses TCP 3389. The router needs a port-forwarding rule that sends incoming traffic on that port to the Windows PC’s internal IP address.
• The game console should connect through the wireless AP. Using WPA2-PSK provides the required wireless security while allowing normal online, chat, and optional services.
• The firewall should separate the internal network from the screened subnet. Its screened-subnet-side address is shown as 10.100.0.1.
• Devices must be placed in the correct network locations: the PC behind the router, the console on the wireless AP, and the firewall between the appropriate network segments.

• A — Add a Path for Stage: A Path lets users update the Opportunity’s Stage directly from the record page, without opening the full edit form. It can also display guidance and key fields.
• B — Use a Kanban list view: Users can move Opportunities between stages by dragging records between columns, which is ideal when Stage is the only field they normally change.

• In Microsoft Entra (Azure AD), admin roles can be scoped to either the entire directory (tenant) or to an Administrative Unit (AU). To assign a role at an AU scope, the user must be a member of that AU.

• Roles in question: Security Administrator and User Administrator can be scoped either to the Directory or to a specific AU.

• User1 is a member of AU1. Therefore, User1 can be assigned either at the AU scope (AU1) or at the Directory scope (global).

• User2 is not a member of AU1. Therefore, User2 cannot be assigned at the AU scope; the valid scope for User2 is only the Directory scope.

• User1: can be assigned at AU1 and at Directory scopes.
• User2: can be assigned only at the Directory scope.

• Recovery procedures actually work
• Recovery time and recovery point objectives can be met
• Staff understand their responsibilities
• Contact details, dependencies, and technical configurations are accurate
• Gaps or conflicts exist in the plan

• Not version-controlled: Creates a risk of using an outdated copy, but the plan might still be effective.
• Contact information needs updating: This is a specific weakness that can be corrected, often identified during testing.
• Not approved by senior management: Approval is important for authority and resource commitment, but an untested plan presents the most direct risk that recovery will fail when needed.

• B — AWS DataSync: Transfers data between storage systems, such as S3, file systems, and on-premises storage. It is not a marketplace or catalog for third-party datasets.
• C — Kinesis Data Streams and CodeCommit: CodeCommit is a source-code repository, not a third-party data provider. Kinesis is for streaming data ingestion.
• D — Kinesis Data Streams and ECR: ECR stores container images, not datasets. Kinesis does not provide access to ECR data as an external dataset source.