CompTIA DA0-001 Exam Prep
Data+ (Page 2 )

• View/inspect configuration: Possible.
• Modify the installed application or its S-Controls: Typically restricted in a test-drive org.

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• Compensating control: The server is end-of-life, so it may no longer receive security patches or support. Placing it on a restricted VLAN provides an alternative layer of protection by reducing who can access it and limiting its exposure.
• Technical control: VLAN segmentation and access control lists (ACLs) are technology-based mechanisms that enforce network access restrictions automatically.

• Managerial: Policies, procedures, and governance—not network configuration.
• Physical: Locks, guards, or barriers.
• Corrective: Restores systems after an incident.
• Detective: Identifies suspicious activity rather than restricting access.
• Deterrent: Discourages behavior but does not enforce access rules.

• 25 — Traditional SMTP server-to-server mail transfer; not normally used for secure client submission.
• 110 — POP3, used to retrieve email and typically unencrypted.
• 143 — IMAP, used to access email and typically unencrypted.

• Have a definite, clear objective (C): Know exactly what you want to communicate. A clear purpose reduces ambiguity and irrelevant information.
• Plan the communication (E): Decide what to say, who needs the information, the appropriate channel and the best timing.
• Seek feedback (F): Check that the receiver understood the message. This could involve asking for confirmation or inviting questions.

• Ask questions (A): Usually associated with the receiver checking or clarifying information, although a sender may use questions in practice.
• Give feedback (B): Feedback is generally the receiver’s response to the sender’s message. The sender’s responsibility here is to seek feedback.
• Consider their contribution (D): This is not a standard sender-focused step in the communication process. The sender should consider the receiver’s needs and perspective, but the wording is less precise than the three recognised actions above.

• C — Schema.describeSObjects(new String[]{myObject})[0].fields.getMap()

• D — Schema.getGlobalDescribe().get(myObject).getDescribe().fields.getMap()

• A: sObjectType is not used this way, and fieldSet() is not the appropriate method for retrieving all fields.
• B: mySObject.myObject is not valid dynamic Apex syntax.

• Field name and label
• Data type
• Reference table
• Default value
• Whether the field is mandatory or read-only
• Field attributes and configuration

• A: Labels and translations are handled through documentation and translation-related records.
• C: Table relationships may be represented through reference fields, but this is not the primary description of the Dictionary.
• D: Spell-checking language data is unrelated to the System Dictionary.

• Sending calls to available agents quickly
• Balancing interactions across agents
• Preventing calls from being handled manually one at a time

• Workforce Management: Forecasts demand and schedules enough staff; it supports wait-time reduction but does not directly distribute calls.
• Skill-based Routing: Routes calls based on agent skills and may improve the customer experience, but the question is asking about the core feature that distributes calls efficiently.
• IVR: Lets callers navigate menus and self-service options; it does not primarily assign calls to agents.

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

• AWS Budgets lets you create a cost or usage budget and configure alerts when actual or forecasted spending reaches a threshold. Notifications can be sent through email or Amazon SNS.
• Amazon CloudWatch can monitor AWS billing metrics and trigger an alarm when estimated charges exceed a specified amount.

• Amazon SQS is a message queue, not a cost-monitoring service.
• Cost Explorer analyzes spending but does not directly provide threshold notifications.
• AWS Cost and Usage Report delivers detailed billing data for analysis; it does not itself send threshold alerts.

• The legacy system creates a signed JWT assertion.
• Salesforce validates the assertion using a certificate configured on a Connected App.
• Salesforce issues an access token for the integration user.
• No refresh token is required; the system can request a new access token when needed.

• Web Server Flow: normally uses a client secret and authorization/refresh tokens.
• Username-Password Flow: requires storing Salesforce credentials and is discouraged for integrations where stronger options are available.
• User Agent Flow: intended for user-interactive applications, not unattended server-to-server processing.

• Product Owner: May attend, but is not required unless also working as a Developer.
• Scrum Master: May attend to help facilitate or coach, but is not required.
• Developers: Must participate because the event is specifically for them.

1. Start with the 48-bit MAC address.
2. Split it into two 24-bit halves.
3. Insert FF:FE between the halves, creating a 64-bit value.
4. Invert the U/L bit—the seventh bit from the left in the first MAC byte.

text 
MAC:       00:1A:2B:3C:4D:5E 
EUI-64:    02:1A:2B:FF:FE:3C:4D:5E

• FE80 is the prefix commonly used for an IPv6 link-local address, not part of the EUI-64 interface ID.
• The interface ID is not random.
• The MAC address is modified by inserting FF:FE and changing the U/L bit.

• SOW
• SLA
• MOA
• MOU

• C series: CPU-optimized instances; not designed primarily for LLM training.
• G series: GPU instances generally optimized for graphics and some machine learning workloads, but not specifically large-scale model training efficiency.
• P series: Powerful GPU instances for ML training, but typically consume more energy than Trainium-based instances for suitable training workloads.

• Laws and regulations
• Litigation holds
• Industry or contractual obligations
• Tax, financial, health, or privacy requirements

• Business strategy and direction: May influence retention, but cannot override legal requirements.
• Storage capacity and longevity: Practical considerations, not the primary driver.
• Business ease and value analysis: May support decisions after compliance obligations are identified.

• A — Can help keep costs down and improve quality: The provider may have specialist expertise, efficient systems and economies of scale.
• B — There is a known fee if agreed in advance: A fixed or agreed fee can make costs more predictable and support budgeting.
• C — Allows management to focus on core operations and issues: Senior managers spend less time supervising routine finance processes and more time on strategic matters.

• Increased control: Control may decrease because the activity is performed externally.
• Increased independence: The organisation becomes dependent on the supplier.
• Increased understanding of the outsourcing business: The internal organisation usually has greater business knowledge; the provider may initially lack it.
• Increased confidentiality: Sharing financial information externally may create confidentiality risks.
• Internal expertise improved: Outsourcing can reduce opportunities to develop internal finance skills.

Question 3: AWS Storage Gateway File Gateway

• A: S3 bucket per user — S3 is object storage, not a traditional shared file system; mounting it requires extra tools and is less efficient.
• B: File Gateway — Provides a local file share using standard file protocols while storing files in Amazon S3. This preserves convenient local access and extends storage capacity.
• C: WorkSpaces and WorkDocs — Designed for virtual desktops and document collaboration, not large shared file storage.
• D: EC2 with EBS — EBS is attached to one EC2 instance and is not designed for direct multi-user file sharing.

• A larger question bank with verified answers
• Explanations tied to ISACA exam domains
• Current content aligned with the exam blueprint
• Useful review or progress features

1. Identify every Region containing a replica.
2. Schedule deletion of the KMS key in each Region.
3. Use the minimum KMS waiting period: 7 days.

• A — Use the root user: Root access does not eliminate the need to schedule deletion for every regional replica. The problem is the multi-Region structure, not insufficient administrative permissions.

• C — Update the key policy: The policy already grants kms:* to IAM principals. Changing permissions does not delete the key or its replicas.

• D — Disable the key and schedule deletion in 30 days: Disabling can stop cryptographic use, but 30 days is slower than the permitted 7-day waiting period. It also does not address replicas in other Regions.

• Whether a user has a console password
• Password age and last password change
• Whether MFA is enabled
• Access key status
• Access key creation date and last-use information
• Access key age, which helps audit rotation

• IAM Access Analyzer identifies unintended access to resources; it does not report credential age or rotation.
• AWS Artifact provides AWS compliance documents and agreements, not details about your IAM users.
• AWS Audit Manager helps collect evidence for audits, but it is not the direct tool for viewing IAM credential rotation details.

Why

cmd 
PowerShell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

Why the other options are less suitable

• GPO logon script: Runs only when a user logs on and may not run during initial VM provisioning.
• GPO startup script: Can work, but requires the VM to be joined to the domain and the policy to be applied. It is also normally evaluated at each startup.
• Place scripts in a VHD: Merely placing scripts on a disk does not cause them to execute.

• Geo-redundant storage (GRS) replicates data to a secondary Azure region, but the secondary copy is normally unavailable for read access.
• RA-GRS provides geo-replication and read-only access to the secondary region, satisfying all requirements.
• Zone-redundant storage (ZRS) replicates data across availability zones within the same Azure region, not separate geographic regions.
• Locally redundant storage (LRS) keeps copies within a single datacenter or region and does not provide geographic resiliency.

• A. A virtual network gateway
• D. A virtual network

• Azure virtual machines must be connected to an Azure virtual network (VNet). The VNet provides private IP addressing and network connectivity for the VMs.
• A virtual network gateway enables communication between the Azure VNet and the on-premises network, typically through a site-to-site VPN or ExpressRoute connection.

• Load balancer: Distributes traffic among Azure VMs; it does not connect Azure to an on-premises network.
• Application gateway: Provides web-application load balancing and Layer 7 routing; it is not the normal resource for on-premises connectivity.
• Gateway subnet: A gateway subnet is required inside the VNet when deploying a virtual network gateway, but the question’s intended two primary resources are the VNet and virtual network gateway.

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

• A: Reduce management overhead — This is generally an advantage of public cloud, not hybrid cloud. Hybrid environments can increase management complexity.
• B: Cross-platform virtualization — Not the defining advantage of hybrid cloud.
• D: Leverage IaaS and PaaS — Public clouds commonly provide both IaaS and PaaS, so this is not unique to hybrid cloud.

• Increase/decrease the number of epochs: Changes how long training runs, but does not reuse a pre-trained model.
• Unsupervised learning: Trains from unlabeled data and does not specifically address adapting an existing model.

• Conserve public IPv4 addresses: IPv4 addresses are limited, so many internal devices share a smaller number of public addresses through NAT.
• Reduce direct exposure: Private addresses are not directly routable from the public Internet, which helps reduce unsolicited access to internal devices.

• 16 VMs: one failure loses 25 GB and 10 cores—only 6.25% of memory.
• 8 VMs: one failure loses 12.5% of memory.
• 4 VMs: one failure loses 25%.
• 1 VM: one failure loses the entire application environment.

• Employees can use approved devices from remote locations or worldwide offices.
• Users do not need to carry or insert extra hardware.
• It helps prevent account takeovers from unknown devices.

• Geotagging: Restricts access based on location, which could interfere with remote work and travel.
• Smart cards: Require additional physical equipment and card readers.
• Time-based logins: Limit access according to time but do not strongly bind access to an authorized user device.

• Mesh: WAPs communicate wirelessly with one another, often to extend coverage without wired connections. It does not specifically describe centralized WLC management.
• Point-to-point: Connects two specific devices or locations.
• Ad hoc: Wireless devices communicate directly with one another without an access point.

• Confirm the required columns and data types
• Identify the target/label column
• Handle missing or duplicate records if present
• Transform data into a suitable format
• Split it into training and validation/test datasets

1. Prepare the training data
2. Select an algorithm or configure AutoML
3. Train the model
4. Evaluate its performance
5. Tune hyperparameters if needed
6. Deploy the model

• A laptop
• Software access
• A password reset
• A mobile phone

• They run behind the scenes — applies more to automation or workflows.
• They are optional — catalog items are fundamental to a request-based catalog.
• They provide options — variables and variable options collect the requester’s choices for an item; they are not the catalog item itself.

• D — Create sibling resource pools for the Production VMs and Test VMs.

• B — Configure a memory reservation on the Production resource pool.

• Shares only determine relative priority when resources are scarce; they do not guarantee memory.
• A parent resource pool alone does not provide a guarantee.
• A child pool for Test VMs does not reserve memory for Production.

• Restarting the device: may fix software problems, but not a directional connection issue.
• Swollen battery: is a safety concern, but would not typically cause recognition only in one orientation.
• Failing cable: possible in general, but less likely because it works on other similar devices.
• Dirty or damaged port: best matches the symptoms. Inspect and carefully clean the port, or have it serviced if damaged.

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

• Snapshot: Captures a point-in-time state for rollback. It is not an independent running VM and does not protect against failure of the underlying host or storage.
• Convert to dynamic disks: Changes disk allocation behavior; it does not provide redundancy or high availability.
• P2V: Converts a physical machine into a virtual machine. That is a migration process, not an availability solution.

• Matching hashes suggest the file has not changed.
• Different hashes indicate that the file was modified, whether authorized or unauthorized.

• Backup: Helps recover the previous version but does not identify or stop unauthorized changes.
• File labels: Classify or mark files; they do not verify integrity.
• Security audit: May discover weaknesses or improper changes, but is periodic and not a direct technical integrity control.

• Due Date
• Order Date
• Delivery Date

DAX 
Order Date = 'Due Date' 
Delivery Date = 'Due Date'

• Due Date[Date] ? Sales[Due Date]
• Order Date[Date] ? Sales[Order Date]
• Delivery Date[Date] ? Sales[Delivery Date]

• Accept: Acknowledging the risk without taking additional action.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity or condition that creates the risk.
• Transfer: Shifting the consequences—usually financial—to another party, such as an insurer.

• B: Moving the task may affect the critical path and should not be done before evaluating the planned response and impacts.
• C: Excluding a required task is not appropriate without formal analysis and stakeholder approval.
• D: Lessons learned and the risk log should be updated, but only after or alongside managing the immediate issue; updating them is not the first action.

• 2000::/3 — Global unicast, used for publicly routable IPv6 addresses.
• FC00::/7 — Unique local, used for private internal addressing.
• FE80::/10 — Link-local, used only on the local network segment and not routed between subnets.

• Separate accounts/domains create a strong administrative boundary between non-production and production.
• Separate projects provide distinct IAM boundaries, billing, quotas, service accounts, and resources.
• Developers can receive permissions in the development project without automatically gaining access to production.
• Production administrators can be restricted from development resources, supporting separation of duties and least privilege.

• A: Creates excessive project fragmentation without being required by the stated requirement.
• C: Keeps development and production under one account and does not clearly separate administrative duties.
• D: Uses one account and only two projects; it provides some project isolation but weaker organizational separation.

• Updating the CRL: Revokes compromised certificates, but does not fix the CA flaw that allowed them to be created.
• Changing passwords: May be necessary if accounts were compromised, but it does not address the certificate-generation vulnerability.
• Implementing SOAR: Improves security automation and response; it does not remediate the underlying PKI weakness.

1. Define Power Platform DLP policies

1. Add custom prompt modifications

1. Conduct adversarial testing

• The VM keeps its configuration, disks, IP settings, and associated resources.
• The operation may cause downtime.
• You cannot guarantee that it will move specifically to Host2; Azure selects the new host.
• Update management is for update configuration, not host relocation.
• Moving to another subscription does not move the VM to a different physical host.
• Usage location is unrelated to VM placement.

• OpenID Connect (OIDC) is an authentication layer built on OAuth 2.0.
• It returns an ID token, normally a JWT containing identity claims such as the user’s subject, name, email, or other permitted attributes.
• The wellness application can consume those claims without needing a separate user-information call.

• JWT Bearer Token Flow: intended for server-to-server authorization and does not primarily provide an end-user ID token.
• Web Server Flow: is an OAuth authorization-code flow. It can be used with OIDC in some implementations, but “Web Server Flow” alone does not specifically guarantee an ID token.
• User Agent Flow: describes an OAuth flow, not the identity protocol itself.

1. Define – establish the project’s objectives, scope, feasibility and requirements.
2. Design – plan how the project will be carried out, including resources, schedules and controls.
3. Deliver – execute the project and produce the required outputs.
4. Develop – close the project formally and capture learning for future projects.

• Filing documentation and records
• Closing project and accounting systems
• Settling costs
• Handing over the completed work and obtaining sign-off
• Reviewing performance and giving feedback

• Documented and evaluated
• Assessed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked with version history and rollback procedures

• Risk management process: May help assess the issues, but it does not authorize and manage design changes.
• Product design process: Applies primarily while creating a new design.
• Design review process: Normally evaluates a design before release; this design is already released.