CompTIA DA0-001 Exam Actual Questions
Data+ (Page 5 )

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• The Act requires:

• It does not, as a public obligation, mandate publishing a detailed report on the training data used.
• Also, the Act does not specify a fixed “six months” retention for system logs in a way that would clearly make A required; logs for traceability are implied, but the six-month period is not a defined, universal requirement.

• RPO (Recovery Point Objective) — maximum acceptable data loss, measured in time. It specifies how far back in time you can tolerate data loss. Example: RPO of 2 hours means backups must occur at least every 2 hours.

• ARO (Annualized Rate of Occurrence) — expected frequency of a threat occurring per year. It estimates how often a risk is likely to happen on average (used in risk calculations).

• MTTR (Mean Time To Recover) — average time to recover/restore service after an incident. It includes detection, repair, and restoration time, and helps gauge downtime and alignment with RTO.

• Startup scripts run at computer startup, before any user logs on, making them ideal for machine-wide configuration on each new VM.
• They execute under the Local System account, which is appropriate for initial setup tasks.
• Linking a GPO to the OU ensures every new VM in that domain automatically receives the configuration—great for scalability.

• A) SetupComplete.cmd runs only once, right after Windows Setup, not on every boot, so it isn’t ideal for provisioning multiple VMs consistently.
• B) Logon scripts run per user, not per machine, so they aren’t reliable for initial VM configuration before a user signs in.
• D) Placing scripts in a VHD doesn’t automatically execute them.

• Goal: serving a static website globally with minimal latency.
• Why C works: CloudFront is a Content Delivery Network (CDN) that caches content at many edge locations around the world. When users request the site, CloudFront serves cached copies from the nearest edge location, greatly reducing latency. It also reduces load on your EC2 origin by handling many requests at the edge.
• Why the other options aren’t as good:

• What the question asks: Identify the three types of tolerances used in accounting (in SAP FI) for automatic processing and postings.

• The given correct set (A, C, D) corresponds to:

• Why not B (Special account tolerance groups)? “Special account tolerance groups” is not a standard SAP term for tolerance groups. The common categories above are the ones SAP typically uses for automatic postings and clearings.

• Quick tip: Tolerance groups define the maximum allowed difference; if a difference exceeds the limit, manual intervention is required.

• S3 Versioning stores all versions of an object. If an object is overwritten or deleted, you can recover the previous version using its version ID.
• This protects against accidental deletion or overwriting because the original data remains accessible as an older version.
• How to enable:

• Practical notes:

• S3 Lifecycle rules: automate moving/expiring data, not specifically protection against deletion.
• S3 bucket policies: control access but don’t inherently preserve previous data.
• S3 server-side encryption: protects data at rest, not against deletion/overwrite.

• The question asks which Azure support plans allow you to open new support requests.

• Key concept:

• Therefore, the correct choice is the plan(s) other than Basic (i.e., Developer, Standard, Professional Direct, Premier). If the provided key lists only one option as correct (A), it may be incomplete or misleading—the official plans page shows that Basic does not meet the requirement, while the paid plans do. See: https://azure.microsoft.com/en-us/support/plans/

• Box 1: Azure Lighthouse — ??? ??????? ? ?????????? ????????? ? ?????????? Entra tenants. ??? ??????????? ??? ??? ????? ????? ? VM ? ?????? ?????????/????????.
• Box 2: Azure Monitor Agent ? ?????????????? Data Collection Rules (DCR) — AMA ???????? ??????? Windows (????????, Security Logs) ? DCR ??????????, ????? ??????? ???????? ? ???? ?????????? (? ?????? Log Analytics workspace).

• Context: You’ve enabled auditing in Dataverse and need to trim audit data to free storage. The question asks which deletion options you can use.

• What the options typically mean:

• About the provided answer (A, C, D): The list includes “by column,” which isn’t a typical or supported way to purge audit data. The more plausible trio is A (by record), B (date range), and C (by table older than date). If the exam expects A, C, D, that seems incorrect or mis-stated in the source.

• Practical takeaway: To reduce audit storage, use per-record deletions, per-table purge by date, and/or date-range deletions as supported by the environment’s audit management UI or admin docs.

• Enable the owner dimension

• Assign a standard costing inventory model

• Batch dimension tracks batches or lots, such as expiration or production batches. It does not identify inventory ownership.
• Moving average is a costing method, but it is not the required choice for this consignment configuration.

• Multi-factor authentication
• A secure password change for users whose credentials may be compromised

• Sales Processes define the set of Opportunity stages for a given workflow.
• Record Types let you have different data models (different fields and picklist values) on the same object.
• Page Layouts control which fields are shown/required for each record type.

• Create three Sales Processes so each team can use its own stages.
• Create three Record Types so each team has its own fields and picklist values.
• Create three Page Layouts so each record type shows the appropriate fields.

• An IDS monitors network traffic for signs of attacks and raises alerts. It can be deployed out-of-band (via a SPAN/mirror port or a tap) so it analyzes traffic without being inline, meaning it doesn’t measurably affect latency.
• An IPS (intrusion prevention system) is inline and can block threats, but that processing can introduce some latency and potential throughput impact.
• A firewall also inspects traffic and can add latency, though usually modest with proper hardware, but its primary purpose isn’t continuous passive analysis.
• A load balancer distributes traffic and isn’t used for intrusion analysis.

• Goal: Identify the host that originated the infection, then label each remaining host as infected or clean based on log evidence.

• Logs to review (across hosts and firewall):

• How to identify the origin:

• How to classify other hosts:

• Quick tip: use the Reset All option if you want to re-run the scenario and practice again.

• Answer: No (the solution proposing an Application Security Group does not meet the goal)

• Why: An Application Security Group is used to simplify NSG rules for VMs, not to enable or configure service endpoints. The requirement is to allow the VM and its containers to reach Azure Storage and Azure SQL via the service endpoint, which is achieved by properly configuring the service endpoints and related networking (NSG and DNS), not by creating an ASG.

• What to do instead to meet the goal:

• Quick takeaway: Don’t rely on an ASG for this scenario. Focus on enabling service endpoints and appropriate NSG/DNS configuration to allow the VM and its containers to reach Storage and SQL.

• TCP is connection-oriented. It establishes a connection before data transfer using a three-way handshake (SYN, SYN-ACK, ACK), enabling reliable delivery, ordering, and flow control.

• UDP is connectionless. It sends datagrams without a prior connection and provides no guarantee of delivery, order, or protection against duplicates; any reliability is up to the application.

• B incorrectly states UDP uses acknowledgment packets; UDP has no built-in ACKs.
• C wrongly claims UDP provides reliable transfer and that TCP is connectionless.
• D misstates framing bits; neither protocol uses the listed TCP/UDP handshake bits in frames.

• The correct option is A: Data architecture.

• Why: In the AWS CAF, the Platform perspective covers the technical foundation and architecture that enable cloud workloads to run reliably and efficiently. This includes how data is modeled, stored, and accessed across the enterprise—the core of data architecture.

• Quick mapping for the other options:

• The correct answer is “Think and work holistically” (Option B).

• Focus on value: ensures outcomes matter to stakeholders, but isn’t specifically about end-to-end delivery.
• Optimize and automate: about efficiency and performance, not the holistic view.
• Collaborate and promote visibility: about teamwork and sharing information, not the end-to-end scope.

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• The AWS Support Concierge is a specialized team within Enterprise Support whose primary role is handling billing and account questions and helping with account setup and getting started.
• They are not the source for architecture guidance or development assistance; those services are provided by Technical Account Managers (TAMs) or Solutions Architects as part of Enterprise Support.
• For technical support cases, customers typically interact with AWS Support engineers or the TAMs, not the Concierge. The Concierge may route or coordinate related requests, but they don’t provide the technical resolution.

• What Concierge does: billing and account inquiries, onboarding help, coordination with AWS support.
• What Concierge does not do: provide architecture/design guidance or in-depth technical support case resolutions.

• Answer: A. Use Amazon SageMaker Serverless Inference to deploy the model.

• Why: SageMaker Serverless Inference hosts the model and serves real-time predictions without you provisioning or managing servers. It scales automatically and handles deployment details.

• Why the others aren’t suitable:

• Quick example flow: web app ? SageMaker Serverless Inference endpoint ? model ? response.

• cloud applications only
• all Web traffic including cloud applications

• Cloud applications only: Only traffic to cloud apps is steered to Netskope for inspection/enforcement; other traffic bypasses.
• All Web traffic including cloud applications: All web-bound traffic, including cloud app traffic, is steered to Netskope.

• Browser isolation, Web traffic only, or a vague “traffic only” option are not the standard two steering modes.
• These two configurations let you decide what traffic Netskope analyzes in real time and what is bypassed.

• The “Answer(s)” field lists B and C (likely incorrect). The explanatory text correctly describes cloud applications only and all Web traffic including cloud applications as the two configurations.

• Reusing features across different models and teams
• Consistent feature definitions
• Managing feature versions and metadata
• Using features for both training and inference

• SageMaker Data Wrangler: Prepares and transforms data; it is not primarily a shared feature repository.
• SageMaker Clarify: Helps detect bias and explain model predictions.
• SageMaker Model Cards: Documents models, including intended use, risks, and evaluation results.

• IPv6 address types:

• The block FF00::/12 is a subset of the multicast space, so it represents multicast addresses.
• Therefore, this block forwards packets to a multicast address (to multiple receivers) rather than to a single unicast address.
• The other prefixes are unicast and would deliver to a single interface.

• Correct answer: D — use the same hashing algorithm as the sender's to create a numerical representation of the file.

• Integrity is verified by recomputing the hash on the received data and comparing it to the sender’s hash. This must use the same hash function; if you use a different algorithm, the digests won’t match even if the data is intact.
• The hash output is a fixed-length digest (a numerical representation). Whether you call it a “binary image” or a “numerical representation,” the key is that you generate the same type of digest with the same algorithm and compare them.

• A: same algorithm but the result is described as a binary image instead of a digest; you still compare the digest, but the phrasing is less precise.
• B/C: using a different algorithm would produce a different digest, causing false mismatch or failure to verify integrity.

• What the goal is: You want to add guest (external) users to your Azure AD tenant contoso.com, one entry per external user in a CSV.

• The proposed solution uses New-AzureADUser for each external user. Why this isn’t correct: New-AzureADUser creates a regular (internal) user in your directory. It does not create a guest/B2B user invite. So you’d end up with 500 ordinary accounts, not guest accounts with external access.

• The correct approach: Use New-AzureADMSInvitation for each external user. This invites the external user to your directory and creates a guest user (a B2B collaboration user) in your tenant. The invited user then accepts the invitation and gains access as a guest.

• Azure AD vs directory/tenant: Azure AD is the cloud identity service. A directory (also called a tenant) is your specific instance of that service (contoso.com in your scenario). The terms are often used interchangeably in exams.
• Guest user vs internal user: A guest user is external to your organization; an internal user is created directly in your directory as a normal employee/user account.
• B2B invitation: The process of inviting external users so they can collaborate in your resources; New-AzureADMSInvitation is designed for this.

• Le rôle n’a pas de clés propres. Des identifiants temporaires (via STS) sont émis lorsque quelqu’un ou quelque chose « assume » le rôle.
• La trust policy déclare qui peut assumer le rôle (par ex. une instance EC2, un utilisateur IAM, ou un service comme Lambda).
• Une fois attaché à une ressource (par exemple comme un instance profile sur une EC2), l’application peut appeler les services AWS avec les permissions du rôle.

• Respect du principe du moindre privilège: on accorde uniquement ce qui est nécessaire.
• Pas de stockages de clés sur les instances; les credentials se renouvellent automatiquement.

• Rôles pour EC2, rôles pour Lambda, accès cross-compte, etc.

• Correct answer: SpeechConfig (D)

• SpeechConfig holds authentication and endpoint details (e.g., subscription key and region).
• It’s the object you pass to real-time processing classes like SpeechRecognizer (speech-to-text) or SpeechSynthesizer (text-to-speech) to connect to the service.

• AudioConfig is for audio input (microphone/file) configuration.
• AudioOutputConfig is for audio output configuration.
• SpeechSynthesizer is a processing class, not a configuration holder.

import azure.cognitiveservices.speech as speechsdk 
speech_config = speechsdk.SpeechConfig(subscription="YOUR_KEY", region="YOUR_REGION") 
use speech_config with recognizer or synthesizer

• The target API uses HTTPS, so Mule must validate the server’s TLS certificate.
• The TLS configuration is set to None, meaning no custom truststore is configured.
• Mule therefore uses the JRE’s default truststore to determine whether the target certificate is trusted.
• If the issuing CA certificate is in that truststore, the TLS handshake can succeed.
• If it is absent—or the certificate is otherwise invalid—the request fails with a TLS/handshake error.

• CDP (a Layer 2 discovery protocol) advertisements still flow on the segment, and basic neighbor information can be exchanged.
• The IP Address TLV in CDP is only present when the sending interface has an IP address. If the adjacent device’s interface is unaddressed, CDP will not advertise an IP address for that neighbor.
• As a result, CDP operates normally, but you cannot obtain that neighbor’s IP address via CDP. Other data (Device ID, Port ID, Capabilities) may still be available.

• Correct answer: B (No, it does not).

• A purchase agreement in Dynamics 365 SCM is a vendor-side price arrangement. It sets prices/discounts for what your company buys from suppliers, not for what you sell to customers.
• The objective in Question 2 is to give clients a quantity-based discount on items they purchase from you. To accomplish this, you should configure a sales price / trade agreement (on the customer/sales side), not a purchase agreement.
• In a sales price trade agreement, you can define quantity breaks such as:

• Create a Sales price trade agreement for the item and relevant customer (or customer group).
• Add quantity breaks: 51–100 with 10% discount, 101+ with 15% discount.
• Ensure the agreement is active for the desired date range.

• Quick context: In a three-tier network (Access, Distribution, Core), roles are:

• Why A is correct: The Distribution layer runs Layer 2 and Layer 3 technologies. It often handles VLAN access (L2) and can perform inter-VLAN routing or connect to the core (L3). So it makes sense for the distribution layer to support both L2 and L3.

• Why B is correct: The Core layer is designed to maintain continuous connectivity when devices fail. It is built for high availability and redundancy, providing multiple paths so the network remains reachable even if some components fail.

• Why the others are not correct:

• The requirement: the support plan must allow opening new support requests (technical support incidents).
• Azure’s Basic plan does not include technical support incidents—only billing/subscription support and access to community support.
• Therefore, you must choose a paid plan to open new technical support requests: Developer, Standard, Professional Direct, or Premier.

• VPC: A logically isolated virtual network in a cloud environment; it describes networking, not shared application access.
• NFV: Replaces dedicated network appliances with virtualized network functions.
• SaaS: A cloud service model in which users consume an application without managing its infrastructure. It could describe how the application is delivered, but the question emphasizes serving multiple user groups, which points to multitenancy.

• Step 1: From Power BI Desktop, select Get Data, choose Folder, enter the folder path, and click OK, then choose Transform data to open Power Query Editor.

• Step 2: In Power Query Editor, expand the Attributes column.

• Step 3: From the Power Query Editor, select the Content column and use Home > Combine Files (aka “Combine binaries”) to consolidate the files.

• Why: If an application on EC2 needs to call other AWS services, using an IAM role (attached to the EC2 instance as an instance profile) provides temporary, automatically rotated credentials. This avoids embedding access keys in the application.
• How it works: Create a role with the minimum required permissions, attach it to the EC2 instance, and let the AWS SDK used by the application retrieve credentials from the instance metadata service. The credentials rotate automatically and are scoped to the policy you define.
• Why not other options:

• A) configure matching hold and delay timers

• B) configure matching key-strings

• C) configure matching priority values

• D) configure unique virtual IP addresses

• Why this is correct: In Azure Virtual Desktop, user access to a host pool is controlled through App Groups. The default app group for a host pool publishes the full desktop, so adding members to that app group grants them sign-in and access to the desktop (and any RemoteApps in that group). This is the standard way to give users access to AVD resources.

• Why the other options are not correct:

• Practical steps (high level):

• What the HOTSPOT is testing

• The actual action you need on HyperV1

• Typical commands you’d use (depending on OS version)

• Why this matters for Q6

• Quick validation steps

• Two instances: Free/Shared do not provide the production-level multi-instance hosting you need. Basic/Standard support more than one instance, with Standard specifically meeting the scale requirement.
• SSL support: SSL (custom domain TLS) isn’t available on the Free tier and isn’t a driver for cost on paid tiers—but you’ll need a paid tier to map a custom domain (miami.weyland.com) and use SSL.
• Storage: Your site needs 12 GB. Free/Shared have very limited storage; Basic tier storage is typically smaller than what you need, while Standard provides substantially more storage capacity.
• Cost: Among the tiers that meet all requirements (two instances, SSL, sufficient storage), Standard is the lowest-cost option that satisfies them.

• wyjasnic istniejace pytania z tej strony,
• wskazac, dlaczego dana odpowiedz jest poprawna lub bledna (z uwzglednieniem celów egzaminu),
• omówic koncepcje zwiazane z Google Cloud AI.

• Review iteration length: Changing duration does not resolve unclear requirements.
• Limit work in progress: Useful when excessive multitasking is the problem, but it does not directly clarify requirements.
• Review individual performance: The issue is a process and backlog-quality problem, not necessarily an individual performance problem.

• Improve QA testing efficiency: A prototype may help discover defects early, but that is not its greatest benefit.
• Decrease time allocated for user testing and review: Prototyping usually requires additional user involvement and review, not less.
• Minimize scope changes: Prototypes can actually reveal new requirements or cause scope changes. However, discovering those changes early is beneficial.

• Catalog Items are the basic units users can request from the Service Catalog.
• Order Guides are bundles that group related catalog items so a user can place multiple items in one order.
• Record Producers are catalog items that, when submitted, create a new record in a specified table (for example, creating a new Incident or a custom record).

• What it asks: Create a lifecycle rule so that blobs in container1 are moved to the lowest-cost tier after 90 days.

• Correct selections:

• tierToArchive moves blobs to the Archive tier, which is the lowest cost storage tier.
• daysAfterModificationGreaterThan: 90 ensures the move happens 90 days after the blob was last modified (i.e., after 90 days of inactivity).

• How to scope the rule to container1:

• tierToArchive = move to Archive (lowest cost)
• daysAfterModificationGreaterThan = 90
• prefixMatch = scopes the rule to blobs within a specific container/path.

• Shadow IT describes employees using unsanctioned tools or methods to access systems, often without IT oversight (e.g., bypassing the VPN).
• Not A (Espionage): this implies external covert actors; here the activity is internal.
• Not B (Data exfiltration): there’s no explicit data transfer shown, just bypassing the VPN.
• Not C (Nation-state attack): this involves external political/strategic actors; not the internal behavior described.

• Implement policy and training to enforce approved tools.
• Use IAM, VPN enforcement, and network access controls to ensure only sanctioned access.
• Monitor for unsanctioned tools and provide secure, approved alternatives.