A company is purchasing a 40Gbps broadband connection service from an ISP.Which of the following should most likely be configured on the 10G switch to take advantage of the new service?
Answer(s): D
To take full advantage of a 40Gbps broadband connection, the 10G switch will need to combine multiple 10Gbps links into a single logical connection, which can be achieved by link aggregation. Link aggregation allows multiple physical links to act as a single logical link, increasing bandwidth and providing redundancy.With a 40Gbps connection, the 10G switch would aggregate multiple 10Gbps links (e.g., 4x10Gbps) to meet the required speed.
Which of the following are the main differences between ESP and AH? (Choose two.)
Answer(s): C,D
ESP provides confidentiality through the use of encryption: ESP (Encapsulating Security Payload) provides confidentiality by encrypting the payload (the data being transmitted). It ensures that the data cannot be read by unauthorized parties.AH provides authentication for IP headers and their payloads: AH (Authentication Header) provides data integrity and authentication for the IP headers and the payload. It ensures that the data hasn't been tampered with, but it does not provide confidentiality (encryption).
An organization wants to ensure that incoming emails were sent from a trusted source.Which of the following DNS records is used to verify the source?
Answer(s): A
To verify that incoming emails were sent from a trusted source, organizations typically use TXT records in DNS. Specifically, SPF (Sender Policy Framework) records are stored as TXT records and are used to specify which mail servers are allowed to send emails on behalf of the domain. This helps verify that the source of the email is authorized and trusted.
Which of the following is the most closely associated with segmenting compute resources within a single cloud account?
Answer(s): C
A VPC (Virtual Private Cloud) is the most closely associated with segmenting compute resources within a single cloud account. A VPC allows you to create isolated network environments within a cloud provider's infrastructure, enabling you to segment resources, control traffic, and apply network security rules. You can define subnets, set up routing, and configure security groups to segment compute resources within that isolated environment.
Which of the following is the most likely function to be decremented when a tool is used to measure the distance between two locations on the internet?
Answer(s): B
TTL (Time to Live) is the most likely function to be decremented when a tool is used to measure the distance between two locations on the internet. TTL is a field in the IP header that is used to limit the lifetime of a packet to prevent it from circulating indefinitely in case of routing loops. Each time the packet is forwarded by a router, the TTL value is decremented by one.When tools like traceroute are used to measure the path and distance between two locations, they rely on the TTL value to determine how many hops (routers) the packet takes to reach its destination.
A user's home mesh wireless network is experiencing latency issues. A technician has:Performed a speed test.Rebooted the devices.Performed a site survey.Performed a wireless packet capture.The technician reviews the following information:The technician notices in the packet capture that frames were retransmitted.Which of the following is the most likely cause of the user's network issue?
From the information provided, we can see that the same SSID (Home) is being used by multiple devices with very close MAC addresses and the same channel (channel 11). This suggests that multiple wireless access points or nodes are operating on the same channel, and the signal coverage may overlap significantly.Reasons for the issue:Overlapping Channels: When multiple access points or mesh network nodes are using the same channel and are physically close to each other, they can interfere with one another, leading to packet collisions and retransmissions. The RSSI values indicate that the devices are fairly close to each other but still experiencing interference due to channel overlap.Retransmissions: The issue of frames being retransmitted, as noted in the packet capture, is a strong indicator of interference, which is often caused by overlapping networks or devices sharing the same frequency (channel 11).
A network engineer implements a 192.168.100.0/25 subnet for a building without obtaining sizing requirements. It is later determined that the building will house 700 people.Which of the following subnet masks will most efficiently support that number of people?
To determine the most efficient subnet mask for supporting 700 people, we need to ensure that the subnet has enough host addresses.Subnet Requirements:Each person requires one unique IP address.A subnet needs to have at least 700 usable IP addresses.The subnet mask determines the number of usable host addresses in the network.Let's examine each option:1. 255.255.252.0 (Subnet mask: /22)A /22 subnet provides 1024 IP addresses (2^10).1024 IP addresses minus 2 for network and broadcast addresses gives 1022 usable IP addresses,which is sufficient to support 700 people.2. 255.255.254.0 (Subnet mask: /23)A /23 subnet provides 512 IP addresses (2^9).512 IP addresses minus 2 for network and broadcast addresses gives 510 usable IP addresses, which is not sufficient for 700 people.3. 255.255.255.0 (Subnet mask: /24)A /24 subnet provides 256 IP addresses (2^8).256 IP addresses minus 2 for network and broadcast addresses gives 254 usable IP addresses, which is far too few for 700 people.4. 255.255.255.128 (Subnet mask: /25)A /25 subnet provides 128 IP addresses (2^7).128 IP addresses minus 2 for network and broadcast addresses gives 126 usable IP addresses, which is not nearly enough for 700 people.Therefore, the /22 subnet (255.255.252.0) is the most efficient choice, providing enough usable IP addresses to accommodate 700 people.
A company is building a new campus that will have wired and wireless devices. The network will be designed to support casual internet usage for guests and break rooms for employees.Which of the following authentication methods is best suited for guests given the requirements of this scenario?
For the given scenario, where a company is building a new campus with a network designed to support casual internet usage for guests and break rooms for employees, PSK (Pre-Shared Key) is the most suitable authentication method for guests.PSK (Pre-Shared Key) is commonly used for wireless networks where the network administrator shares a single, simple password or key with users. It's ideal for guest networks in a scenario where there is no need for individual user authentication but rather a simple way for guests to access the network.WPA (Wi-Fi Protected Access) is a wireless security protocol that PSK can work under, such as WPA2-PSK.It provides security through encryption but is easier to set up for guest access by providing a shared password.WPA itself is a protocol for securing wireless networks, but it does not specifically refer to the method for authenticating users, which in this case would be PSK.
Post your Comments and Discuss CompTIA N10-009 exam prep with other Community members:
Our website is free, but we have to fight against AI bots and content theft. We're sorry for the inconvenience caused by these security measures. You can access the rest of the N10-009 content, but please register or login to continue.