Dell D-NWG-FN-23 Exam Prep
Dell Networking Foundations 2023 (Page 5 )

• Users retain their existing usernames and passwords.
• Existing accounts can be used to access Azure-based resources.
• Administrators avoid manually recreating thousands of accounts.
• The transition is less disruptive before the on-premises data center is retired.

python 
def add_integers(a, b): 
    return a + b

• Uses def to define a function.
• Accepts two parameters, a and b.
• Uses return to send their sum back to the caller.
• Uses indentation to define the function body.

python 
result = add_integers(3, 4) 
result is 7

• AWS Audit Manager continuously collects evidence from AWS services and helps assess whether workloads comply with regulatory frameworks and internal policies. It can produce audit-ready reports.
• AWS Config records resource configurations and evaluates them against compliance rules. For example, it can check whether encryption, logging, or access settings meet company requirements.

• Amazon Inspector identifies software vulnerabilities and unintended network exposure, not general policy or regulatory compliance.
• Amazon CloudWatch monitors metrics, logs, and operational events, but is not primarily a compliance assessment service.
• AWS CloudTrail records API activity for auditing and investigation. It supports compliance, but does not itself provide the structured compliance assessment capabilities of Audit Manager and Config.

• A separate scope using a /32 subnet: A /32 identifies one host, but it is not a practical DHCP scope for this purpose.
• A static IP within the DHCP range: This can cause an IP address conflict if DHCP assigns that address to another device.
• SLAAC: Used for automatic IPv6 address configuration, not for assigning a predictable IPv4 address through DHCP.

• I can’t view the images, so I can’t tell which table is labeled as A in your screenshot. But here’s how to decide:

• How to identify the fact table:

• How to identify the surrogate key in the Patient table:

• Relationship:

• Used for communication on the local link or LAN segment
• Automatically generated on IPv6-enabled interfaces
• Not routed by routers to other networks
• Commonly used by devices to communicate with their local IPv6 router
• Begins with FE80 through FEBF

• FC00::/7 — unique local unicast
• FE80::/10 — link-local unicast
• FF00::/8 — multicast
• 2000::/3 — global unicast

• Disabling GPS: Affects location services, not email connectivity.
• Configuring 4G usage only: Does not enable international data access and could prevent connectivity if 4G is unavailable.
• Connecting using a hotspot: Could provide data, but it is not the most direct solution and depends on another network or device.

• The VPN gateway is in VirtualNetworkA.
• Gateway transit is configured on the peering associated with the VNet that contains the gateway—here, VirtualNetworkA.
• A peered VNet may use the remote gateway through the appropriate peering option, but this does not automatically update an existing P2S client’s routes.
• The Windows 10 workstation’s P2S VPN client package was created before VirtualNetworkB was peered, so it may not have a route for VirtualNetworkB.

powershell 
Get-AzureVM -ServiceName <service-name> -Name <vm-name> | 
  Set-AzureStaticVNetIP -IPAddress <private-ip> | 
  Update-AzureVM

• New-AzureRMVMConfig configures VM settings but does not itself assign the static IP.
• Set-AzureSubnet is not the appropriate cmdlet for assigning a VM’s private IP.
• The Azure portal option mentioned in the question was not the intended method for this older deployment model.
• Changing settings in Windows Network and Sharing Center is incorrect because Azure assigns the IP through the VM’s virtual network interface; manually configuring it inside the guest can cause conflicts.

• 2000::/3 — Global unicast, used for publicly routable IPv6 addresses.
• FC00::/7 — Unique local, used for private internal addressing.
• FE80::/10 — Link-local, used only on the local network segment and not routed between subnets.

• A — conformant: Incorrect because one explicit requirement is violated.
• B — consistent: “Consistent” is not sufficient where the implementation contradicts a mandatory specification. The RPC mechanism is covered by the architecture, and the implementation differs from it.
• C — consistent: Incorrect reasoning: the RPC mechanism does have a defined architectural requirement, so conformance must be assessed.
• D — non-conformant: Correct because the implementation fails to follow the specified RPC/threading requirement.

• Microsoft 365 groups can contain users, but generally can’t contain other groups as members.
• Security groups can contain users and, where supported, other security groups.
• Distribution groups have different nesting restrictions and aren’t equivalent to security groups.
• Dynamic groups can’t be manually populated with members; their membership is calculated from rules.
• A group’s membership type (Assigned or Dynamic) and group type determine whether it can be added to another group.

• Correct answer: A) Hashing

• Why: Hashing produces a fixed-size digest of the software. If the final build is altered in any way, the hash will change, enabling you to detect tampering by comparing the stored digest with a freshly computed one.

• Why not the others:

• C — “when the query finishes”

• D — “when the query began”

• Assignment
• Decision
• Get Records
• Loop

• Screen flow: Would include a Screen element.
• Inactive version: Inactive status does not restrict the available elements.
• Activated version: Activation status also does not determine the toolbox contents.

• AWS IoT Greengrass supports local ML inference using models trained in Amazon SageMaker.
• The model and inference code run on the factory’s local server, so processing continues even when internet connectivity is unavailable.
• A Greengrass component can:

• This provides low latency and avoids sending images to AWS for every inference.

• A: Uses AWS-hosted services and therefore depends on internet connectivity. It would fail during an outage.
• C: Snowball Edge is unnecessary for this use case and adds deployment complexity. A local Greengrass server is the intended edge-inference solution.
• D: Amazon Monitron is designed for monitoring industrial equipment health, not analyzing camera images with a custom SageMaker model.

• A larger question bank with verified answers
• Explanations tied to ISACA exam domains
• Current content aligned with the exam blueprint
• Useful review or progress features

• Answer: C – netstat -an

• netstat -an lists all active connections and listening ports with numeric addresses, without resolving names. This lets you spot DoS patterns such as a flood of connections to a specific port or many connections from a single or few IPs.
• The other options don’t help as directly:

• Windows: netstat -an and look for numerous ESTABLISHED connections to a service or many SYNs to a port.
• Filter by port, e.g., netstat -an | findstr :80, or on Linux: ss -tunap | grep ':80'.

• Netstat provides a snapshot. DoS detection often benefits from continuous monitoring, flow data, and IDS/IPS logs.

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

• Disable default accounts: Default or unused accounts may have predictable names or credentials and can be abused by attackers. They should be disabled, removed, or secured with strong credentials where necessary.
• Remove unnecessary services: Every running service can contain vulnerabilities or provide an entry point. Removing services the server does not need reduces exposure.

• Add the server to the asset inventory: Important for asset management, but it does not directly harden the system.
• Document default passwords: Default passwords should be changed or disabled—not recorded for continued use.
• Send logs to the SIEM: Supports monitoring and detection, rather than directly reducing the attack surface.
• Join the corporate domain: A deployment/configuration decision, not inherently a hardening measure.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

kusto 
Event 
| summarize make_set(EventID) by Computer

• summarize groups records.
• by Computer creates one result row per virtual machine.
• make_set(EventID) returns an array containing unique event IDs for that computer.

kusto 
| summarize make_list(EventID) by Computer

1. Identify every Region containing a replica.
2. Schedule deletion of the KMS key in each Region.
3. Use the minimum KMS waiting period: 7 days.

• A — Use the root user: Root access does not eliminate the need to schedule deletion for every regional replica. The problem is the multi-Region structure, not insufficient administrative permissions.

• C — Update the key policy: The policy already grants kms:* to IAM principals. Changing permissions does not delete the key or its replicas.

• D — Disable the key and schedule deletion in 30 days: Disabling can stop cryptographic use, but 30 days is slower than the permitted 7-day waiting period. It also does not address replicas in other Regions.

• Amazon DynamoDB — Managed NoSQL database, not PostgreSQL.
• Amazon Athena — Serverless service for querying data in S3; intended for analytics, not OLTP.
• Amazon EMR — Managed cluster platform for big-data frameworks such as Hadoop and Spark.

• A is correct: Days beyond the included period incur an extra daily charge.
• D is incorrect: Daily use after 10 days is not free.
• B and C: Data-transfer pricing can depend on the direction and service terms. The exam’s intended distinction is that the included device usage period is the clearly stated no-cost benefit.

• The policy is confidential, and the requester is no longer authorized merely because they used to work for the organization.
• The security professional should not disclose it by email or display it on a device without authorization.
• Using official channels allows the organization’s owner or information custodian to verify:

• R-squared: Typically used for regression, not classification.
• RMSE: Measures prediction error for continuous numerical values, so it is not the best fit here.
• Learning rate: A training hyperparameter that controls how quickly the model updates its weights; it is not an evaluation metric.

• Self-signed certificate: Causes a certificate warning, not incorrect IP resolution.
• Nameserver record: A DNS record problem would typically affect multiple users, not just one.
• IP helper: Relays DHCP or other broadcast traffic between networks; it does not control website name resolution.

• Guiding principles
• Governance
• Service value chain
• Practices
• Continual improvement

• Guiding principles: Recommendations that guide decisions and actions; they do not describe the entire system.
• Four dimensions: Perspectives used to ensure a balanced approach to service management.
• Service relationship: Describes cooperation between a service provider and service consumer, rather than the whole value-creation system.

• Numerical flexibility: Adjusting the number of employees, such as using temporary, part-time or contract staff.
• Temporal flexibility: Varying when employees work, such as through flexitime, overtime or different working hours.
• Shift system flexibility: Changing work patterns or shift arrangements; it is not specifically about moving between tasks.

• B. Users accessing Salesforce from public Wi-Fi

• C. Users choosing the same password as their Facebook password

• A: 2FA does not protect an already-authenticated, unlocked session if someone accesses an unattended laptop.
• D: Weak password-reset questions are an account-recovery weakness. 2FA primarily strengthens login authentication, not necessarily the security-question reset process.

• Entradas grandes, de até aproximadamente 1 GB.
• Processamentos demorados, que podem levar até cerca de 1 hora.
• O cliente envia a solicitação e consulta o resultado depois, sem precisar manter uma conexão aberta durante todo o processamento.

• Real-time inference: indicada para respostas imediatas, com entradas menores e processamento rápido.
• Serverless inference: adequada para cargas variáveis e solicitações menores; não é ideal para processamento longo e arquivos grandes.
• Batch transform: processa grandes volumes em lote, mas não atende à necessidade de respostas próximas do tempo real.

Why

cmd 
PowerShell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

Why the other options are less suitable

• GPO logon script: Runs only when a user logs on and may not run during initial VM provisioning.
• GPO startup script: Can work, but requires the VM to be joined to the domain and the policy to be applied. It is also normally evaluated at each startup.
• Place scripts in a VHD: Merely placing scripts on a disk does not cause them to execute.

• Server — provides services or resources
• Endpoint — a user device connected to the network
• Ethernet — a networking technology, not a filtering device
• Firewall — filters and controls traffic

• A — VARIANT "null" values are not the same as SQL NULL: Correct.

• B — Frequent, single-row DMLs: Incorrect.

• C — Validate data before loading into the target table: Correct.

• D — Use staging tables to manage MERGE statements: Correct.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity and usually alerts rather than directly scanning and blocking uploaded files.
• C. Load balancer: Distributes traffic among servers but does not inspect files for malware.
• D. WAF: Protects web applications from attacks such as SQL injection, cross-site scripting, and some malicious requests. It is not primarily a PDF-malware scanning solution.

• The target API uses HTTPS, so Mule must validate the server’s TLS certificate.
• The TLS configuration is set to None, meaning no custom truststore is configured.
• Mule therefore uses the JRE’s default truststore to determine whether the target certificate is trusted.
• If the issuing CA certificate is in that truststore, the TLS handshake can succeed.
• If it is absent—or the certificate is otherwise invalid—the request fails with a TLS/handshake error.

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

• Cutover: The old system is replaced immediately. It may be fast, but any failure can cause significant disruption.
• Phased: The system is introduced in stages, which reduces implementation risk but may prolong the transition.
• Pilot: The system is first deployed to a limited group or location. This is useful for testing but does not necessarily minimize downtime for the entire organization.

• The files are stored in a document library, which is exposed through the SharePoint Folder connector.
• The connector returns file metadata, including Folder Path, Name, and Content.
• In Power Query, filter Folder Path so only files in the manufacturing reports folder are retained.
• You can then combine the remaining Excel files because they all have the same structure.

• SharePoint List is for SharePoint lists, not document-library files.
• Combine & Load combines files immediately, before you filter to the required folder, and may include unwanted files.
• Transform gives you the opportunity to filter the file list first, which is more efficient and targeted.

• administrators — Full access to switch configuration and REST API functions; excessive for this requirement.
• sysadmin — Intended for highly privileged system administration, not basic monitoring.
• helpdesk — More limited and focused on troubleshooting/support functions; it does not match the stated default role and level-1 requirement as directly.

• Product Owner: May attend, but is not required unless also working as a Developer.
• Scrum Master: May attend to help facilitate or coach, but is not required.
• Developers: Must participate because the event is specifically for them.

• 16 VMs: one failure loses 25 GB and 10 cores—only 6.25% of memory.
• 8 VMs: one failure loses 12.5% of memory.
• 4 VMs: one failure loses 25%.
• 1 VM: one failure loses the entire application environment.

• The user starts in the corporate portal.
• The portal launches the Salesforce resource.
• The IdP sends the SAML response to Salesforce.

• Connected App + OAuth is for OAuth authorization and API/app access, not this SAML-based seamless login scenario.
• SP-initiated SSO would begin when the user first requests the Salesforce resource and Salesforce redirects them to the IdP. That is not the described starting point.

• Accept: Acknowledging the risk without taking additional action.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity or condition that creates the risk.
• Transfer: Shifting the consequences—usually financial—to another party, such as an insurer.

sql 
CREATE TABLE my_table 
USING CSV 
OPTIONS (path '/path/to/csv');

sql 
CREATE TABLE my_table 
USING CSV 
LOCATION '/path/to/csv';

• USING CSV specifies the file format.
• path or LOCATION specifies where the files are stored.
• USING DELTA would be used only when the source data is in Delta format.
• FROM is used in a SELECT statement, not normally as the format declaration in CREATE TABLE.

• Multi-factor authentication
• A secure password change for users whose credentials may be compromised

• Customers access the portal without needing a full Dynamics 365 license.
• They submit case information through portal forms.
• The submitted data is stored in Dataverse tables, such as the Case table.
• Security is controlled using web roles and table permissions, so customers can access only appropriate records.

• Dynamics 365 Connector — connects apps to Dynamics 365 data but is not the portal’s underlying data platform.
• Microsoft SharePoint — useful for documents and collaboration, not the standard case-management data source for portals.
• Microsoft Azure Storage — stores files or other data, but is not the native portal business-data platform.

• A — Reports: Reports are informational and don’t enforce access during an SSO transaction.
• B — Apex trigger and Permission Sets: A trigger could update permissions when a Case changes, but this creates synchronization and timing issues. It also changes Salesforce permissions rather than making a direct, real-time decision for the external system.
• C — Custom SAML JIT Provisioning: JIT provisioning is primarily for creating or updating users at login. It isn’t the appropriate mechanism for dynamically querying business records and deciding whether access should be granted.
• D — Connected App Handler: Designed for custom, programmatic control during connected-app authentication and authorization. Apex can check the user’s current open classified cases and permit or reject the SSO request.