QUESTION: 9

Refer to Exhibit:

An OpenManage Enterprise environment contains both Dell EMC 13G and 14G PowerEdge servers and an online catalog that is configured as shown.

A Device Manager is tasked with creating a firmware baseline using Catalog1 for all the server infrastructure. During the task, they find that they are only able to select the 14G PowerEdge servers in the environment.

What is causing the problem?

Only Administrators are permitted to create firmware baselines
The catalog does not contain any firmware applicable to 13G servers
Only the 14G servers are in the scope of their account
Each firmware baseline can only contain servers from the same generation

Answer(s): B

Explanation:

Understanding the Catalog Configuration: The online catalog, as shown in the exhibit, is configured to source the latest component versions from Dell.com. This catalog is named `Catalog1'. Identifying the Issue: The Device Manager is unable to select 13G PowerEdge servers when creating a firmware baseline using Catalog1. This indicates that the catalog lacks firmware for 13G servers. Catalog Contents: Since Catalog1 is set to pull the latest component versions, it is likely that it only includes firmware for the most recent, supported server generations, which in this case appears to be the 14G PowerEdge servers.
Firmware Baseline Creation: Firmware baselines are created to standardize the firmware versions across the server infrastructure. If certain server generations are not included in the catalog, they cannot be selected for the baseline.
Reference to Dell OpenManage Documentation: Dell OpenManage documentation would typically explain how catalogs are associated with server generations and their firmware. It would state that if a catalog does not contain firmware for a particular generation, servers from that generation cannot be included in the baseline.
The exhibit provided context for the issue at hand, showing that Catalog1 is likely tailored for 14G servers, hence the absence of 13G server firmware. This aligns with standard practices for managing server firmware where catalogs are generation-specific to ensure compatibility and supportability.

Reveal Solution Next Question

QUESTION: 10

In OpenManage Enterprise which type of custom group should be used for a list of devices that update based on specific properties of discovered systems?

Static
Discovery
Dynamic
Query

Answer(s): C

Explanation:

In OpenManage Enterprise, custom groups can be created to organize devices based on various criteria. For a list of devices that update automatically based on specific properties of discovered systems, the appropriate type of custom group to use is a Dynamic group.
Here's a detailed explanation:
Static Groups: These groups are manually created and managed. Devices must be manually added or removed, and the group does not update based on changes to device properties.

Dynamic Groups: These groups are automatically updated based on predefined criteria or properties.
When a device meets the criteria, it is automatically included in the group, and if it no longer meets the criteria, it is removed.
Discovery Groups: These are typically used for organizing devices based on the method of discovery or during the initial discovery phase.
Query Groups: While these groups can be based on specific queries, they are not automatically updated like Dynamic groups.
Therefore, for a list of devices that need to update based on specific properties, a Dynamic group is the recommended choice as it ensures the group membership remains current with the changing properties of the devices1.
This information is based on the functionalities provided by Dell EMC OpenManage Enterprise, as outlined in the official documentation. It is always recommended to refer to the latest OpenManage

Enterprise documentation for the most current features and procedures.

Reveal Solution Next Question

QUESTION: 11

An Implementation Engineer has deployed 20 PowerEdge R740 servers using a deployment template called PER740_V1. An OpenManage Enterprise administrator validates the work using the Baseline Compliance feature.
When the administrator goes to the Compliance tab and selects Create Baseline, PER740_V1 is not in the list of available templates.

What is the most likely cause for this issue?

PER740_V1 is already assigned to a compliance job.
The deployment template attributes are set to read-only.
The systems are already compliant to that template.
PER740_V1 compliance template has not been imported.

Answer(s): D

Explanation:

The most likely cause for the PER740_V1 template not appearing in the list of available templates when creating a baseline in OpenManage Enterprise is that the PER740_V1 compliance template has not been imported into the system.
Here's a detailed explanation:
Template Availability: For a deployment template to be used for baseline compliance, it must first be imported into OpenManage Enterprise.
Compliance Feature: The Baseline Compliance feature compares the current firmware and settings of servers against a known good baseline (the template) to determine compliance. Import Process: If the template is not listed, it suggests that the import process was not completed or the template was not designated as a compliance template within the system. Checking Import Status: Administrators can verify whether a template has been imported by checking the template management section within OpenManage Enterprise. It's important to note that while other options might seem plausible, they typically would not prevent a template from being listed. For example:
Option A: Even if a template is assigned to a compliance job, it should still appear in the list of available templates.

Option B: Read-only attributes would not affect the listing of the template. Option C: Systems being already compliant does not remove the template from the list; it would simply show that the systems are compliant with that template. Therefore, the correct answer is D. PER740_V1 compliance template has not been imported, which aligns with the standard procedures for managing deployment templates and baseline compliance within Dell OpenManage Enterprise1. It is recommended to check the import status and ensure that the template is correctly set up as a compliance template in the system.

Reveal Solution Next Question

QUESTION: 12

What is the minimum warranty level required for the SupportAssist adapter to monitor the hardware status of a managed server?

ProSupport Plus
ProSupport
Basic Hardware
Basic Plus

Answer(s): A

Explanation:

The minimum warranty level required for the SupportAssist adapter to effectively monitor the hardware status of a managed server is ProSupport Plus. This level of service provides the most comprehensive support features, including proactive and predictive support capabilities that are essential for hardware monitoring.
Here's the rationale for this answer:
ProSupport Plus: This is the highest level of service offered by Dell, providing 24x7 priority access to ProSupport engineers, repairs for accidental damages, and proactive monitoring with SupportAssist technology1.
SupportAssist Technology: SupportAssist is a proactive monitoring tool that automatically detects hardware and software issues. It requires an active ProSupport or ProSupport Plus warranty to utilize all its features2.
Hardware Monitoring: With ProSupport Plus, SupportAssist can perform detailed hardware monitoring, send alerts, and even initiate automatic case creation for issues3.
While SupportAssist can still function with other warranty levels, ProSupport Plus ensures the full utilization of its capabilities, especially for critical hardware status monitoring and automated support case generation. It's important to have the appropriate level of warranty to ensure that servers are monitored effectively and support is provided promptly when issues are detected.

Reveal Solution Next Question

Free D-OME-OE-A-24 Exam Braindumps (page: 3)

QUESTION: 9

Explanation:

QUESTION: 10

Explanation:

QUESTION: 11

Explanation:

QUESTION: 12

Explanation: