QUESTION: 25

Based on the exhibit, what describes the state in which RPA-3 must be in prior to selecting "Next" to advance the wizard?

Powered on and configured with the displayed LAN address
Powered on and configured with the displayed WAN address
Connected to the SAN with storage provisioned
Attached to the displayed RecoverPoint cluster

Answer(s): A

Explanation:

Power On: Ensure that RPA-3 is powered on.
Configure LAN Address: Assign and configure the LAN IP address as displayed in the wizard for RPA-3. Verification: Verify that the RPA-3 is reachable at the configured LAN address. Advance the Wizard: Once the above steps are confirmed, select "Next" to proceed with the wizard. It is essential that the RPA is powered on and correctly configured with the LAN address shown in the deployment wizard to ensure proper communication and integration into the RecoverPoint cluster.

Reveal Solution Next Question

QUESTION: 26

How does Unisphere identify a RecoverPoint initiator with VNX through RPA registration?

RPA_0_0
RPA < wwn >
RP_HBA_0_0
RP _< name >_0_0

Answer(s): B

Explanation:

Initiator Identification: Unisphere identifies a RecoverPoint initiator with VNX through RPA registration by using the World Wide Name (WWN) of the RecoverPoint Appliance (RPA). Registration Process: During the registration process, the RPA's WWN is used to uniquely identify and authenticate the RPA within the storage network.
Unisphere Integration: Once registered, the RPA can be managed and monitored through Unisphere, which is the management interface for VNX and other EMC storage systems. For detailed procedures on RPA registration and integration with Unisphere, refer to the Dell RecoverPoint deployment documentation or the Unisphere for RecoverPoint user guide.

Reveal Solution Next Question

QUESTION: 27

When the admin user password has been lost, how can the password be reset?

Log into the CLI using boxmgmt and then run the set_user name=admin password= command
Reboot the appliance from DVD and then select "password recovery" from the GRUB menu
Log into the CLI with the security role and then run the set_user name=admin password= command
Log into the boxmgmt menu, select Diagnostics => Advanced Diagnostics => Run Internal Commands => and then run the passwd admin command

Answer(s): A

Explanation:

Access the CLI: Use the boxmgmt account to log into the Command Line Interface (CLI) of the RecoverPoint Appliance.

Run the Command: Execute the set_user name=admin password= command to initiate the password reset process.
Set New Password: Follow the prompts to set a new password for the admin user. This process is used when the admin password has been lost and needs to be reset. It is important to follow the correct syntax and procedure to ensure the security and integrity of the system.

Reveal Solution Next Question

QUESTION: 28

A company decided to change their VNX environment from MirrorView to RecoverPoint with VNX(SE) as a disaster recovery solution. They initially planned to purchase four RPAs at each site to replication between Sites A and B. However, to ensure the company uses their large server inventory, management plans to change from physical RPAs to vRPAs.

What effect do their plans have on the license procurement?

An advanced RecoverPoint license is needed
An additional RecoverPoint with VNX(SE) license is needed
Licensing remains same; no action required
A RecoverPoint/EX license is needed

Answer(s): C

Explanation:

When changing from physical RPAs to vRPAs in a RecoverPoint with VNX(SE) environment, the licensing remains the same and no additional action is required. The existing licenses can be applied to the virtual RPAs without the need for new licenses.

Reference:

Dell RecoverPoint for Virtual Machines 6.0.1 vSphere HTML5 Plugin Administrator's Guide, Chapter on licensing and virtual RPA deployment.

Reveal Solution Next Question

Free D-RP-DY-A-24 Exam Braindumps (page: 7)

QUESTION: 25

Explanation:

QUESTION: 26

Explanation:

QUESTION: 27

Explanation:

QUESTION: 28

Explanation:

Reference: