Docker DCA Exam Prep
Docker Certified Associate (Page 15 )

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2

• Existing measures
• Relationships
• Calculated columns
• Tables and fields
• Existing transformations in the model

• SharePoint folder: Reconnects to the source files. You would likely need to recreate the model and measures.
• Power BI dataflows: Primarily provide reusable data preparation and storage, but they do not automatically provide the existing semantic model and measures.
• Excel workbook: Connects directly to the source file and would also require rebuilding the model and measures.

Correct reasoning

• Create storage5 as a General-purpose v2 (StorageV2) account.
• Configure Blob object replication from storage5 to an existing compatible storage account.
• The destination must support object replication—typically another StorageV2 or premium block blob account.
• Blob versioning must be enabled on both accounts.
• Blob change feed must be enabled on the source account.
• The accounts must meet Azure’s object-replication requirements, including being in supported regions and having compatible configuration.

• Injection
• Broken access control
• Authentication failures
• Security misconfiguration
• Cross-site scripting

• STIX: A standardized language and format for exchanging threat intelligence.
• OVAL: Used to describe and assess system vulnerabilities and configuration issues.
• Threat intelligence feed: Provides current indicators and intelligence about threats, but not necessarily a structured overview of common application exploitation methods.
• CVE: A catalog of individually identified, publicly disclosed vulnerabilities.

• C — Before update
• D — Before insert

apex 
trigger AccountTrigger on Account (before insert, before update) { 
    for (Account acct : Trigger.new) { 
        acct.Description = 'Updated automatically'; 
    } 
}

• In after insert and after update, Trigger.new records are read-only.
• Use after triggers when you need the record’s final database Id or want to create/update related records.
• Attempting to change a field directly in an after trigger causes a read-only error.

apex 
for (Account updatedAccount : Trigger.new) { 
    AccountTriggerHelper.notinyxternalSystem(updatedAccount.Id); 
}

• Too many callouts: The callout occurs asynchronously in the future method, and each future transaction can perform its permitted callouts.
• Too many SOQL queries: The SOQL query is inside the future execution, not repeatedly in the trigger transaction.
• Callout from triggers not supported: Direct callouts from triggers are prohibited, but the trigger delegates the callout to asynchronous Apex, which is the correct pattern.

• Endpoint Manager: manages hosts and sensor-related settings.
• Falcon Investigator: supports investigation and analysis, but does not necessarily grant RTR access.
• Remediation Manager: handles remediation-related actions rather than interactive host access.

• Azure Machine Learning Studio is designed to build, test, train, and deploy machine-learning models, including predictive analytics.
• Azure Cosmos DB is a globally distributed NoSQL database. It can store data used by an AI solution, but it is not the primary service for developing and deploying predictive models.
• Therefore, the appropriate recommendation is Azure Machine Learning Studio, as shown in Question 15.

• Share files with the wrong people
• Use public links unnecessarily
• Fail to classify sensitive data
• Upload data to unauthorized services
• Misunderstand company sharing policies

• A — Step-up authentication: Helps protect administrator accounts, but does not directly address improper file sharing by users.
• C — Password complexity: Helps reduce password attacks, not accidental data disclosure.
• D — Mobile device management: Secures managed mobile devices, but does not directly control file-sharing behavior across the organization.

Box 1: No

• configure_azure_monitor() configures Azure Monitor and the OpenTelemetry pipeline.
• LangChain requires its own instrumentation or callback tracer, such as AzureAIOpenTelemetryTracer.
• You must pass the tracer to the LangChain execution configuration so chains, tools, prompts, and model calls become spans in Application Insights.

Box 2: Yes

text 
OTEL_SERVICE_NAME=customer-agent 
OTEL_SERVICE_NAME=invoice-agent

• A is valid:

apex 
  for (Account theAccount : AccountList) { 
      // process theAccount 
  }

• D is conceptually valid, using an index:

apex 
  for (Integer i = 0; i < AccountList.size(); i++) { 
      Account theAccount = AccountList[i]; 
  }

• B is invalid because for(AccountList) is not valid loop syntax.
• C is invalid because each item is an Account, not a List.

• Microservices: An application design approach that divides software into small services; it does not specifically reduce the number of operating systems.
• Containerization: Uses isolated containers that share the host OS kernel—best match.
• Virtualization: Creates separate virtual machines, and each typically requires its own guest OS, so it does not minimize OS instances as effectively.
• Infrastructure as code: Automates deployment and management of infrastructure; it does not describe the architecture being used.

• Due diligence: Investigating and evaluating a third party before entering a business relationship.
• Attestation: An independent auditor’s examination and formal report—such as the SOC 2 report itself. The analyst is reviewing the attestation, not performing it.
• Internal audit: Examines the organization’s own processes and controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

• B: Developer Edition has limited user, storage, and data-volume capacity, making realistic community testing difficult.
• C: A Developer Edition org cannot contain sandboxes, so it cannot provide separate environments for development, integration, and UAT.
• E: A standalone Developer Edition org is not part of the production org’s deployment path, so change sets cannot be used to deploy from it directly to that production org. The team would need Metadata API, Salesforce CLI, or another deployment method.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

• Architects design overall Splunk infrastructure and data strategy.
• Administrators manage configuration, access, and system operations.
• Knowledge Managers create and maintain knowledge objects such as data models, field extractions, and event types. They may support pivots, but they are not the primary users of them.

• Power BI dataset — Reuses the existing tables, relationships, and measures. You mainly create new visualizations.
• SharePoint folder — Connects to the source files, but you would need to rebuild the model and measures.
• Power BI dataflows — Primarily provide reusable data preparation; they do not automatically provide the existing report’s measures and model.
• Excel workbook — Requires reconnecting to and modeling the source data again.

• Partners first log in to the corporate portal, which uses the shared SAML Identity Provider.
• When they select a Salesforce link, the IdP can send a SAML assertion directly to Salesforce.
• Salesforce validates the assertion and grants access to the Partner Community without requiring another login. This is IdP-initiated SSO because authentication begins outside Salesforce.

• SP-initiated SSO starts when Salesforce sends an authentication request to the IdP. That would be appropriate if users began by visiting Salesforce.
• The Web Server and User Agent OAuth flows are for OAuth authorization, not browser-based SAML federation between an IdP and Salesforce.

• How quickly the vendor must respond to incidents or requests
• Availability or uptime requirements
• Resolution time targets
• Performance expectations and penalties for failing to meet them

• SOW (Statement of Work): Describes the work, deliverables, scope, and schedule.
• MOA (Memorandum of Agreement): Documents an agreement in which parties commit to specific responsibilities.
• MOU (Memorandum of Understanding): Records a general intention to cooperate; it may not be legally binding.

1. Open Notepad as Administrator.
2. Open:

1. Remove or correct the line mapping the website to the wrong IP address.
2. Save the file.
3. Optionally run:

cmd 
   ipconfig /flushdns

• The type of change: standard, normal, or emergency
• The risk, impact, and complexity
• The change model being used

• A standard change may be pre-authorized through its change model.
• A normal change may require assessment and approval by an appropriate change authority.
• An emergency change may be authorized by an emergency change authority, often using an expedited process.

• Change authorities are not only needed for emergency changes.
• They are not assigned only when a change is deployed.
• They are not only required for normal changes.

• desktopwidth:i:1280
• desktopheight:i:1024

• Connection information: Controls connection-related settings, not the desktop resolution.
• Scaling plan: Controls when session hosts start, stop, or scale based on demand.
• Session behaviour: Controls behavior such as disconnect or logoff handling.
• Display settings: Specifically controls RDP display properties, making it the appropriate choice.

• Root path cost
• Port priority
• Port ID

text 
interface GigabitEthernet0/1 
 spanning-tree vlan 10 port-priority 64

• Interface number: Helps form the port ID but is not normally configured as the preference value.
• VLAN priority: Not used to select a preferred forwarding interface.
• Hello time: Controls how often BPDUs are sent; it does not select a preferred port.

• Base table — the table containing common inherited fields
• Parent table — the table directly extended by the child
• Other tables in the hierarchy

• Insert is used when you are creating a new record. It saves the record to the table and then leaves the form.
• Update is used when editing an existing record. It saves the modifications and then leaves the form.

• B — Sales staff will tender for riskier contracts:

• C — Sales staff will encroach on other territories:

• D — Sales staff will look for new jobs:

• A: CEO-sponsored formal policy — demonstrates executive support, but sponsorship at one point in time may not sustain commitment.
• B: Security awareness training — primarily improves employee behavior, not senior management commitment.
• C: Periodic alignment reviews — ongoing reviews show that security remains relevant, supports business priorities, and uses resources appropriately.
• D: Senior management signoff on the strategy — useful for governance and accountability, but signoff is generally a one-time event.

• Disabling a compromised account
• Blocking a malicious IP address
• Isolating an endpoint
• Creating or escalating an incident ticket

• Virus signatures: Primarily associated with antivirus or endpoint protection.
• Security agent deployment: Usually handled by endpoint-management or security-agent platforms.
• Vulnerability scanning: Typically performed by vulnerability-management tools.

• Third-party enterprise application with embedded AI: The provider manages most security controls. The customer mainly manages users, data, and configuration.
• Application using an existing third-party FM: The customer controls the application and its inputs/outputs, but the provider controls the underlying model and infrastructure.
• Fine-tuning a third-party FM: The customer has additional responsibility for training data, data protection, and model behavior, but still depends on the provider’s base model and platform.
• Building and training a model from scratch: The customer controls the model, training data, application, deployment, and many security safeguards. This creates the greatest security ownership.

• 25 — Traditional SMTP server-to-server mail delivery; often restricted and not the usual client submission port.
• 110 — POP3, used for retrieving email; normally unencrypted.
• 143 — IMAP, used for retrieving and synchronizing email; normally unencrypted.

• Feedback form: Captures opinions, not necessarily actual behavior; users may not respond.
• Questionnaire: Relies on memory and subjective judgments about usefulness.
• Interviews: Can provide valuable qualitative insights, but a sample of users may not represent overall usage accurately.

• Internal hostnames and subdomains
• Network structure and naming conventions
• Servers and services
• Relationships between systems

• Determining ISP-assigned address space: Usually involves external registration and DNS information, not internal host discovery.
• Bypassing DNS sinkholing: Would require evidence that malicious DNS requests avoided redirection.
• Initial access: DNS queries alone do not show that the attacker gained access.
• Exfiltrating data: DNS tunneling can do this, but the snippet would typically show encoded or unusually long DNS queries.

• Future costs — Only costs occurring in the future can be affected by the investment decision. Past costs are sunk and irrelevant.
• Incremental costs — These are additional costs caused by choosing the investment. They are relevant because they differ between alternatives.
• Cash flows — Capital investment decisions are based on future cash inflows and outflows, usually discounted to present value.

• Committed costs have already been agreed or incurred and generally cannot be changed by the decision.
• Unavoidable costs will arise regardless of which option is selected, so they do not affect the choice.

• A — VARIANT "null" values are not the same as SQL NULL values: True

• B — Frequent, single-row DMLs: False

• C — Validate data before loading into the target table: True

• D — Use staging tables to manage MERGE statements: True

• Marketing users: Dynamic Forms can show all fields.
• Support users: Field visibility rules can display only the Support preference fields on the record page.
• Reporting: Both profiles can still report on all fields because Dynamic Forms controls page visibility, not the underlying field access.

• A — Two record types and page layouts: Page layouts can control field placement and editability, but they are less flexible for conditional field visibility and would not be the best fit here.
• C — Muting permission set: Permission-set muting is used with permission-set groups; it does not conditionally hide fields on a page.
• D — Field-Level Security: FLS would remove field visibility at the security level. If fields are hidden by FLS, users generally cannot report on or access those fields, conflicting with the requirement that both users report on all data.

• Controlar o fluxo de dados entre S3 e SageMaker;
• Aplicar regras de segurança por meio da VPC;
• Reduzir a exposição dos dados;
• Permitir acesso privado ao bucket do S3.

• Amazon Inspector: avalia vulnerabilidades, mas não gerencia o fluxo de dados.
• Amazon Macie: ajuda a descobrir e proteger dados sensíveis no S3, mas não cria a conexão com o SageMaker.
• S3 Glacier Deep Archive: é uma classe de armazenamento para arquivamento, não uma solução de conectividade.

• WPA3: Secures wireless traffic but does not normally verify whether someone has paid.
• PSK: A shared Wi-Fi password gives access to anyone who knows it; it cannot easily validate individual receipts.
• IEEE 802.1X: Provides user/device authentication, commonly through an authentication server, but is excessive and not designed specifically for a simple receipt-based guest-access workflow.

• UPS battery-backed outlets: Connect only essential devices needed during an outage:

• Surge-protector-only outlets: Connect nonessential devices, especially the printer. Printing does not need to continue while you are saving work and shutting down.
• UPS power source: Plug the UPS directly into a wall outlet.
• Surge protector power source: Plug it directly into a wall outlet as well. Do not normally plug a surge protector into the UPS, because that creates a daisy chain and can overload the UPS.

• Company documents
• Databases
• Knowledge bases
• Current web or business data

• A: Describes diversity and inclusive design, not grounding.
• B: Describes explainability or model interpretability.
• D: Describes documenting a model’s capabilities and limitations.

• The job keeps 31 days of regular restore points. A backup from the week of January 1 is older than 31 days by March 20, so it is no longer expected to remain on the performance tier.
• It is also a weekly GFS full backup, retained for 14 weeks. Therefore, it is still protected and has not been deleted.
• In a Scale-out Backup Repository, older backups can be moved from the performance tier to the capacity tier—typically object storage—according to the configured offload policy.
• The archive tier is not selected because the question’s configuration does not indicate that the backup has been archived there.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity there is a strong indicator of compromise.
• DNS sinkholes: Redirect malicious or suspicious DNS requests to a controlled destination. This can identify infected systems attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it is not an attacker-detection method.
• CI/CD: Automates software development, testing, and deployment.
• Threat modeling: Identifies potential threats and weaknesses before or during system design; it does not directly detect an active infiltrator.
• Data obfuscation: Makes information harder to understand, but does not identify attackers.

• Virtual introductions: Team members share their role, experience, location, and working preferences.
• Online icebreakers: Short, informal activities such as “two truths and a lie.”
• Virtual coffee chats: Pair team members for informal, non-project conversations.
• Collaborative problem-solving: The team works together on an online puzzle or scenario.
• Retrospectives: The team discusses what went well, what did not, and how to improve.
• Working-agreement sessions: The team agrees on response times, meeting etiquette, communication channels, and handoffs.
• Recognition sessions: Members acknowledge one another’s contributions.
• Remote workshops: Teams jointly create plans, diagrams, or schedules using collaboration tools.

• CSIRT: A team that responds to and manages security incidents.
• CVSS: A scoring system for rating the severity of vulnerabilities.
• SOAR: A technology platform for automating and coordinating security operations and incident response.

• The product is already in production.
• The organization is examining the product’s functions and cost drivers.
• The objective is to reduce cost without reducing perceived value or required quality.

• Kaizen costing focuses on continuous, usually incremental, cost reductions during the manufacturing stage. It is not specifically the systematic examination of a product’s functions.
• Standard costing compares actual costs with predetermined standards; it is a control technique, not a product redesign method.
• Process innovation concerns developing significantly improved production processes, rather than analysing the product’s functions and value.

• A. PsFile — Correct: Displays files opened remotely on a system. This reveals shared resources and user activity.
• B. UserInfo — Correct: Gathers information about user accounts, supporting account and privilege enumeration.
• C. PsPasswd — Answer key lists it: This is questionable. PsPasswd is primarily used to change passwords remotely, not enumerate information. The key may classify it broadly as a Windows account-management tool, but it is not a strong enumeration example.
• D. WinSSLMiM — Incorrect: Used for SSL man-in-the-middle activity, not enumeration.

• Enforce organizational rules, such as allowed regions or required tags
• Audit resources for compliance
• Deny noncompliant deployments
• Aggregate compliance results across subscriptions

• IaaS: você gerencia a VM e o sistema operacional.
• PaaS: o Azure gerencia a infraestrutura; você se concentra no aplicativo.