EC-Council 312-38 Exam Prep
Certified Network Defender (Page 16 )

text 
interface GigabitEthernet0/0.10 
 encapsulation dot1Q 3

• .10 is the router’s local subinterface number.
• dot1Q 3 identifies the 802.1Q VLAN tag carried on the trunk.

text 
interface GigabitEthernet0/0.3 
 encapsulation dot1Q 3

text 
interface GigabitEthernet0/0.2 
 encapsulation dot1Q 2

• Configure row-level security (RLS) using the sales region and the HR manager’s identity.
• Publish the reports and datasets through a Power BI app.
• Grant the HR managers permission to use the app, but do not add them as workspace members.
• App users can view and interact with reports while RLS limits them to their region.
• They cannot modify the report layout because they do not have workspace editing permissions.

• Adding them to the workspace gives them workspace permissions that may allow report or dataset changes, depending on the assigned role.
• Creating copies is unnecessary and creates maintenance and security problems.
• Hosting datasets and reports in different workspaces does not, by itself, provide the required controlled access.

• Espionage: Stealing confidential information, often for a competitor or government.
• Data exfiltration: Unauthorized transfer of data outside the organization. This could occur, but the question focuses on using unapproved access methods.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Employees using technology or access methods outside the organization’s approved security controls.

• terraform apply
• terraform destroy

• A is valid:

apex 
  for (Account theAccount : AccountList) { 
      // process theAccount 
  }

• D is conceptually valid, using an index:

apex 
  for (Integer i = 0; i < AccountList.size(); i++) { 
      Account theAccount = AccountList[i]; 
  }

• B is invalid because for(AccountList) is not valid loop syntax.
• C is invalid because each item is an Account, not a List.

• Allow only approved MAC addresses
• Limit the number of learned addresses
• Shut down or restrict a port when a violation occurs

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the direct control for limiting MAC addresses on switch ports.
• NGFW: Filters routed network traffic, while this attack targets Layer 2 switch behavior.

• The ERSPAN source is the device or interface whose traffic is being copied.
• The ERSPAN destination is the device receiving the encapsulated copy and forwarding it to the traffic analyzer.
• The local monitor session number is locally significant. Therefore, the source and destination do not need matching session IDs such as 47 or 48.
• The erspan-id identifies the ERSPAN stream and must correspond between the source and destination configuration.

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• contoso.onmicrosoft.com
• contoso1.onmicrosoft.com

• onmicrosoft.com domains: Maximum of five per tenant.
• Custom domains: Domains that your organization owns and verifies in Microsoft 365.

• Response and resolution time frames
• Availability or uptime requirements
• Performance targets
• Support obligations
• Penalties for failing to meet requirements

• SOW (Statement of Work): Defines the project’s scope, tasks, and deliverables.
• MOA (Memorandum of Agreement): Describes cooperation and responsibilities between parties.
• MOU (Memorandum of Understanding): Records a general mutual understanding, usually without detailed enforceable service targets.

• Each Azure VM must have at least one network interface (NIC).
• A single NIC can have:

• Therefore, each of the five VMs needs only one NIC:

• C — Before update
• D — Before insert

apex 
trigger AccountTrigger on Account (before insert, before update) { 
    for (Account acct : Trigger.new) { 
        acct.Description = 'Updated automatically'; 
    } 
}

• In after insert and after update, Trigger.new records are read-only.
• Use after triggers when you need the record’s final database Id or want to create/update related records.
• Attempting to change a field directly in an after trigger causes a read-only error.

• B: Developer Edition has limited user, storage, and data-volume capacity, making realistic community testing difficult.
• C: A Developer Edition org cannot contain sandboxes, so it cannot provide separate environments for development, integration, and UAT.
• E: A standalone Developer Edition org is not part of the production org’s deployment path, so change sets cannot be used to deploy from it directly to that production org. The team would need Metadata API, Salesforce CLI, or another deployment method.

• Marketing users: Dynamic Forms can show all fields.
• Support users: Field visibility rules can display only the Support preference fields on the record page.
• Reporting: Both profiles can still report on all fields because Dynamic Forms controls page visibility, not the underlying field access.

• A — Two record types and page layouts: Page layouts can control field placement and editability, but they are less flexible for conditional field visibility and would not be the best fit here.
• C — Muting permission set: Permission-set muting is used with permission-set groups; it does not conditionally hide fields on a page.
• D — Field-Level Security: FLS would remove field visibility at the security level. If fields are hidden by FLS, users generally cannot report on or access those fields, conflicting with the requirement that both users report on all data.

apex 
Set<Id> accountIds = new Set<Id>{ accountId1, accountId2 }; 


List<Account> accounts = [ 
    SELECT Id, Name 
    FROM Account 
    WHERE Id IN :accountIds 
];

• A: LIMIT accepts a number, not a collection of IDs.
• B: Set.containsAll() checks set contents in Apex; it does not filter SOQL results.
• C: Database.query() accepts a dynamic SOQL string, not a Set<Id> directly.

• Wireshark captures packets and allows you to examine their contents, potentially revealing usernames and passwords sent without encryption.
• Netcat creates network connections and can send or receive data, but it is not primarily a packet-analysis tool.
• Nessus scans for known vulnerabilities and configuration issues; it generally would not prove that credentials are visible in transit.
• Nmap performs network discovery and port/service scanning, not detailed packet-content inspection.

• SAML (Security Assertion Markup Language): Commonly used for enterprise SSO between an identity provider and cloud applications. It sends signed authentication assertions to the service provider.
• RADIUS: Primarily used for centralized authentication to network devices, VPNs, and wireless networks.
• EAP: An authentication framework commonly used with network access technologies; it is not typically the SSO protocol for SaaS applications.
• OpenID: Related to identity authentication, but traditional enterprise SSO questions involving cloud applications generally expect SAML. OpenID Connect is a newer authentication layer built on OAuth 2.0.

• A. Remove rows where Sales[Status] is Canceled

• E. Remove Sales[Canceled Date]

• B: Removing Sales_Date would remove information users need—the date portion.
• C: Changing Delivery_Time to Integer could alter its meaning or precision and is not necessarily safe.
• D: Splitting the date/time column creates additional columns rather than simply removing unnecessary data.

1. insert con; ? 1
2. Database.setSavepoint(); ? 2
3. update con; ? 3
4. Database.rollback(sp_admin); ? 4

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings

• Microsoft Purview portal: Create and manage sensitivity labels and configure support for sensitivity labels used with Office files in SharePoint and OneDrive.
• SharePoint admin center: Primarily manages SharePoint settings. Older guidance and PowerShell procedures used SharePoint tenant configuration, which can make this question confusing.
• IRM: Concerns Information Rights Management and is a separate protection mechanism; it should not be used to identify the portal for configuring Microsoft Purview sensitivity labels.

• CSIRT: A team that responds to and manages security incidents.
• CVSS: A scoring system for rating the severity of vulnerabilities.
• SOAR: A technology platform for automating and coordinating security operations and incident response.

• Sales process: Controls which Opportunity Stage values are available.
• Record type: Associates the appropriate sales process with a business scenario and controls available picklist values.
• Page layout: Controls which fields are displayed and whether they are required or read-only.

• Energy Market Team 1 ? Record Type 1, Sales Process 1, Page Layout 1
• Energy Market Team 2 ? Record Type 2, Sales Process 2, Page Layout 2
• Services/Installation Team ? Record Type 3, Sales Process 3, Page Layout 3

• Sets a high initial price for a new product.
• Targets customers willing to pay more, often called early adopters.
• Gradually reduces the price to attract more price-sensitive customers as the product becomes less novel and competition increases.

• Penetration pricing: starts with a low price to gain market share quickly.
• Premium pricing: maintains a high price to communicate superior quality or status; it does not necessarily involve later price reductions.
• Loss leader pricing: sells one product at a very low price, sometimes below cost, to attract customers who may buy other products.

• Identified risks
• Risk owners or responsible parties
• Likelihood and impact
• Risk response plans
• Current status
• Risk thresholds or trigger conditions

• Risk tolerance: The amount and type of risk an organization is willing to accept; it is not primarily a tracking document.
• Risk transfer: Moving the financial or operational impact of a risk to another party, such as through insurance or outsourcing.
• Risk analysis: The process of evaluating a risk’s likelihood and impact.

• Controlar o fluxo de dados entre S3 e SageMaker;
• Aplicar regras de segurança por meio da VPC;
• Reduzir a exposição dos dados;
• Permitir acesso privado ao bucket do S3.

• Amazon Inspector: avalia vulnerabilidades, mas não gerencia o fluxo de dados.
• Amazon Macie: ajuda a descobrir e proteger dados sensíveis no S3, mas não cria a conexão com o SageMaker.
• S3 Glacier Deep Archive: é uma classe de armazenamento para arquivamento, não uma solução de conectividade.

• The message came from the claimed sender (authentication)
• The message was not altered in transit (integrity)
• The sender cannot easily deny having signed and sent it (non-repudiation)

• Compliance standards: May be a reason in some organizations, but it is not the primary security benefit.
• Increase delivery rates: Digital signatures do not generally improve email delivery.
• Block phishing attacks: Signatures can help recipients verify legitimate messages, but they do not block phishing by themselves.

• Suspended an operator who refused to use unsafe equipment.
• Paid another operator a bonus for using it.
• Prioritised short-term productivity over employee safety.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — The factory’s safety record is likely to be poor.

• IRR assumes that interim cash flows can be reinvested at the project’s own IRR. This may be unrealistic, especially when the IRR is very high.
• MIRR assumes reinvestment at a specified rate, usually the company’s cost of capital or another realistic reinvestment rate.

• B: MIRR does not specifically favour projects with long payback periods.
• C: MIRR and IRR can rank competing projects differently.
• D: MIRR is not always higher than IRR; it may be higher or lower depending on the cash flows and reinvestment rate.

• Third-party attestation: Provides independent validation, but is typically periodic and performed by an external party.
• Penetration testing: Simulates attacks to identify exploitable vulnerabilities; it does not primarily track compliance.
• Vulnerability scans: Identify technical weaknesses, but do not provide a detailed review of procedures or compliance activities.

• B — Data source settings in Power BI Desktop:

• D — Formula bar in Power Query Editor:

m 
  Excel.Workbook(File.Contents("new path"))

• E — Advanced Editor in Power Query Editor:

• A: Dataset settings in the Power BI service mainly handle credentials and gateway settings, not changing the local file path embedded in the PBIX.
• C: Current File data-load settings control refresh/load behavior, not the source location.

1. Wireless AP

1. Router

1. Firewall

1. Device placement

• Storage usage of files stored in Microsoft Teams: SharePoint site usage report

• Number of active users per team: Microsoft Teams usage report

1. SharePoint site usage report
2. Microsoft Teams usage report

• Actions that call external APIs
• Subflows
• Connection and credential aliases
• Supporting integration logic

• Action — A reusable operation within a flow, such as “Create a record” or “Send email.”
• Connection — Defines how ServiceNow authenticates and communicates with an external system.
• Integration step — A general flow step, not the name for the packaged integration.

• The S3 bucket as an origin for static content
• The Application Load Balancer (ALB) as an origin for dynamic content
• An Amazon Route 53 alias record pointing the application domain to CloudFront

Why this works

• Static data: CloudFront caches objects from S3 at edge locations, reducing latency for users worldwide.
• Dynamic data: CloudFront forwards requests that require application processing to the ALB. It can also maintain persistent connections and use the AWS global edge network to improve delivery performance.
• One domain: CloudFront behaviors can route different path patterns to different origins—for example, /static/* to S3 and other paths to the ALB.

Why the other options are incorrect

• Global Accelerator is designed primarily for accelerating traffic to applications with endpoints such as ALBs, not for caching S3 content.
• Using separate domains or splitting static and dynamic traffic adds unnecessary complexity.
• CloudFront already provides the required global edge distribution and caching, so combining it with Global Accelerator is unnecessary here.

• Reporting relationships
• Organizational structures
• Leadership styles
• Team maturity
• Individual and group behavior
• Communication and motivation

• Acquire Project Team: Focuses on obtaining the people needed for the project.
• Develop Project Team: Focuses on improving team skills, relationships, and performance.
• Manage Project Team: Focuses on tracking performance, resolving issues, and managing changes within the team.

• Atomicity: a write fully succeeds or does not appear.
• Consistency: table state remains valid.
• Isolation: concurrent operations do not corrupt one another.
• Durability: committed changes persist.

• Flexible schemas: common data lakes often support flexible or schema-on-read data.
• Open-source formats: common data lakes commonly use open formats such as Parquet.
• Scalable storage: cloud data lakes already provide scalable storage.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• sn_si_admin is an SIR administrator role.
• The prefix helps prevent naming conflicts between applications.
• It does not refer to a “Secure Identity token” or an instance security check.

• Asynchronous inference is designed for applications that submit individual inference requests, place them in a queue, and retrieve results later. It is useful when requests may take a long time or when traffic is intermittent.
• Batch transform is designed specifically to run inference over an entire large dataset stored in Amazon S3 and produce an output dataset.

• Large dataset/offline processing ? Batch transform
• Large or slow individual requests processed later ? Asynchronous inference

• Due diligence: Researching and evaluating a third party before entering or continuing a business relationship.
• Internal audit: Evaluates controls within the organization itself.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.
• Attestation: A formal statement or report—such as a SOC 2 report—provided by an independent party about an organization’s controls.

• BCP (Business Continuity Plan): è più ampio e mira a mantenere le funzioni essenziali dell’organizzazione durante un’interruzione. Il DRP è una componente più specifica del BCP.
• Communication plan: stabilisce come comunicare con dipendenti, cittadini e altre parti interessate, ma non ripristina i sistemi.
• IRP (Incident Response Plan): gestisce la risposta iniziale a un incidente di sicurezza, come un attacco informatico, non principalmente il recupero da un disastro fisico.

• Verifies the sender’s identity using their private key.
• Confirms the transaction was not altered after signing.
• Provides evidence that the signer approved or originated the transaction.

• Digital certificates: Bind an identity to a public key, but do not themselves prove that a specific transaction was signed.
• Encrypted passwords: Protect confidentiality or authentication, but generally do not provide transaction-level nonrepudiation.
• One-time passwords: Authenticate a user for a session or transaction, but usually do not provide durable proof of who authorized the electronic record.

• Compute: Not used; no virtual warehouse is required.
• Data Storage: Not scanned again.
• Metadata: May help Snowflake manage and validate cached results, but it is not the Snowflake architectural layer identified as serving the request.
• Cloud Services: Handles query coordination, metadata services, authentication, and result-cache access.

1. Install a Cassandra-compatible ODBC driver.
2. Configure a data source name (DSN), if required.
3. In Power BI Desktop, select Get Data > ODBC.
4. Choose the configured DSN and connect.

• Microsoft SQL Server database: Connects to SQL Server, not Cassandra.
• OLE DB: Requires a compatible OLE DB provider; this is not the standard choice for Cassandra in Power BI.
• OData: Requires Cassandra data to be exposed through an OData service, which is not the normal direct connection method.

• PC A: 192.168.1.10/24
• PC B: 192.168.2.10/24

• Both PCs have a correct default gateway
• A router or Layer 3 switch connects the subnets
• Routing and firewall rules allow the traffic

• File hashes
• Strings and metadata
• Binary or code structure
• Known malicious patterns
• Embedded indicators or signatures

• Sandbox: Executes the file in an isolated environment; useful for observing behavior, but usually slower.
• Network traffic analysis: Examines communications generated by a system or application, not the file itself.
• Package monitoring: Tracks software packages or installations and is not the primary method for examining malware signatures.

• T?o m?t Systems Manager Automation runbook d? ch?y l?nh kh?i d?ng l?i ?ng d?ng trên các EC2 instance.
• T?o m?t Amazon EventBridge rule ph?n ?ng khi CloudWatch alarm chuy?n sang tr?ng thái ALARM.
• Ð?t Automation runbook làm target c?a EventBridge rule.

1. Log c?a ?ng d?ng du?c ghi vào CloudWatch Logs.
2. CloudWatch alarm phát hi?n nhi?u l?i liên quan d?n vi?c restart.
3. Alarm chuy?n sang tr?ng thái ALARM.
4. EventBridge nh?n s? ki?n thay d?i tr?ng thái này.
5. EventBridge g?i Systems Manager Automation runbook.
6. Runbook restart ?ng d?ng trên các EC2 instance, không restart c? instance.

• A: SNS không tr?c ti?p g?i Systems Manager Automation runbook nhu m?t target native.
• B: Lambda có th? th?c hi?n vi?c restart, nhung ph?i t? x? lý vi?c xác d?nh instance và ch?y l?nh t? xa.
• C: Lambda ch? làm trung gian d? g?i runbook, không c?n thi?t vì EventBridge có th? g?i runbook tr?c ti?p.

• The selling division receives a credit based on a favourable transfer price, often market price or full cost plus a profit margin.
• The receiving division is charged a lower amount, such as marginal cost or another agreed price.
• The difference is accounted for centrally by head office or a corporate adjustment.

• Economy: Obtaining inputs at the lowest appropriate cost.
• Efficiency: Making the best use of resources, such as staff, money, and equipment.
• Effectiveness: Achieving the intended objectives or outcomes.