EC-Council 312-49V9 Exam Prep
ECCouncil Computer Hacking Forensic Investigator (V9) (Page 15 )

• Constrained VMs: VMs whose workloads are experiencing resource pressure, such as insufficient CPU or memory. They may need additional resources or optimization.
• Overprovisioned VMs: VMs allocated more CPU, memory, or storage than their workloads require. Their resources may be reclaimed or reduced.

• Underprovisioned VMs: This is not the predefined view identified for this report question.
• Zombie VMs: These are typically inactive or unused VMs and are useful for cleanup, but they are not the two views specifically intended here to identify inefficient resource allocation.

• A: CEO-sponsored formal policy — demonstrates executive support, but sponsorship at one point in time may not sustain commitment.
• B: Security awareness training — primarily improves employee behavior, not senior management commitment.
• C: Periodic alignment reviews — ongoing reviews show that security remains relevant, supports business priorities, and uses resources appropriately.
• D: Senior management signoff on the strategy — useful for governance and accountability, but signoff is generally a one-time event.

• Authentication: Verifies who the user is.
• Authorization: Determines what the authenticated user is allowed to access.
• Accounting: Records login activity and resource usage.

• CIA: Confidentiality, integrity, and availability—the core security objectives.
• ACL: Access Control List; rules that permit or deny traffic or access.
• PEM: A format and standard commonly associated with encoded certificates and keys.

• Dark web: A place where leaked credentials may be sold or shared, not usually the original source.
• Threat feeds: Collections of intelligence about threats, not a typical leakage source.
• State actors: A type of attacker, not an accidental corporate disclosure source.
• Vulnerability databases: Track known vulnerabilities, rather than leaked credentials.

• Attack simulator — Used to run phishing and other attack simulations for user awareness training.
• Hunting — Used to proactively query security data and investigate potential threats.
• Incidents — Used to investigate and manage related alerts and active security events.

• 24 cores: Available in the Business Critical provisioned-compute configurations.
• Approximately 124 GB memory: Matches the memory capacity of the relevant Business Critical hardware configuration.
• More than 50,000 IOPS: Business Critical uses local SSD storage and provides the high I/O performance required here.
• 500 GB storage: Well within the tier’s supported capacity.

• Premium: The DTU-based Premium tier does not provide the required combination of compute, memory, and I/O characteristics.
• Hyperscale: Hyperscale is primarily intended for very large databases and independent storage scaling. It is not the best match for these specific high-memory and high-IOPS requirements.

• C — Some risks cannot be eliminated.

• D — Accepting residual risk does not imply recklessness.

• E — Most companies in this industry will say something similar.

• B — The most significant risks are held by SQ.

• C — SQ should recognise the cars as inventory.

• F — SQ recognises revenue when LM sells a car to a third party.

• A: LM does not hold the most significant risks.
• D: LM does not recognise the cars as inventory.
• E: SQ should not recognise revenue when cars are merely delivered to LM.

• B — Notify affected business units: Notification should follow an initial determination of scope and impact; otherwise, the organization may communicate incomplete or inaccurate requirements.
• C — Assess noncompliance risk: Risk assessment requires understanding the regulation’s requirements first.
• D — Inform senior management: Management should be informed, but with a clear summary of the regulation’s impact, risks, and recommended actions.

• API tool matcher: runs a deterministic normalization command after the API tool returns.
• Write/Edit matcher: checks whether the target path begins with src/api/ and runs the linter.

json 
{ 
  "hooks": { 
    "PostToolUse": [ 
      { 
        "matcher": "api_tool", 
        "hooks": [ 
          { "type": "command", "command": "normalize-to-snake-case" } 
        ] 
      }, 
      { 
        "matcher": "Write|Edit", 
        "hooks": [ 
          { "type": "command", "command": "lint-if-under-src-api" } 
        ] 
      } 
    ] 
  } 
}

• IKE (Internet Key Exchange) negotiates the IPsec security association, including:

• ESP (Encapsulating Security Payload) protects the data after negotiation by providing encryption and optionally authentication.
• AH provides authentication and integrity but does not encrypt traffic.
• TLS is used for protocols such as HTTPS, not for negotiating IPsec parameters.

• Sales process: Controls which Opportunity Stage values are available.
• Record type: Associates the appropriate sales process with a business scenario and controls available picklist values.
• Page layout: Controls which fields are displayed and whether they are required or read-only.

• Energy Market Team 1 ? Record Type 1, Sales Process 1, Page Layout 1
• Energy Market Team 2 ? Record Type 2, Sales Process 2, Page Layout 2
• Services/Installation Team ? Record Type 3, Sales Process 3, Page Layout 3

• O File Gateway fornece uma interface de compartilhamento de arquivos usando protocolos como SMB ou NFS.
• Os usuários continuam acessando os arquivos localmente, aproveitando a baixa latência e o cache local.
• Os dados são armazenados de forma durável no Amazon S3, enquanto os arquivos acessados com frequência permanecem em cache no ambiente local.
• Isso amplia a capacidade de armazenamento sem exigir a substituição completa da infraestrutura existente.

• A: Montar buckets S3 diretamente não oferece uma experiência de compartilhamento de arquivos local tão adequada.
• C: Amazon WorkSpaces fornece desktops virtuais, não é uma solução principal de armazenamento compartilhado.
• D: Um volume EBS pertence a uma instância EC2 e não deve ser compartilhado diretamente entre vários usuários como um sistema de arquivos comum.

• Vulnerability scanner: Identifies technical weaknesses in systems, applications, or devices.
• Penetration test: Simulates attacks to determine whether vulnerabilities can be exploited.
• SCAP (Security Content Automation Protocol): Uses standardized formats and protocols for automated vulnerability, configuration, and compliance checks.
• Illumination tool: Maps and analyzes broader supply-chain exposure and third-party risk.

• Disable high concurrency: This changes session-sharing behavior but does not provide dedicated compute or true workload separation.
• Modify the number of executors: Adjusts resources within a Spark job; it does not isolate bronze and silver processes.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

• Data source: Folder
• Transformation: Remove the Content column (or keep only the file-metadata columns)

Why

• File name
• Extension
• Date modified
• Folder path
• Content — the binary contents of the file

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

• B: Prompt caching reduces cost and latency for repeated content, but cached content still occupies the context window. It does not solve context accumulation.
• C: Switching to a smaller model changes model capacity but does not address the growing context or remove irrelevant data.
• D: Keeping everything indefinitely increases token usage, risks context-window limits, and can distract the model with outdated information.

• A — Use getRecordTypeInfosByDeveloperName()

apex 
  Id rtId = Schema.SObjectType.Account 
      .getRecordTypeInfosByDeveloperName() 
      .get('Business_Account') 
      .getRecordTypeId();

• C — Query the RecordType object

apex 
  RecordType rt = [ 
      SELECT Id 
      FROM RecordType 
      WHERE SObjectType = 'Account' 
      AND Name = 'Business Account' 
      LIMIT 1 
  ];

• B: An outbound SOAP call is unnecessary and inefficient.
• D: Hardcoding an ID is not dynamic, and IDs can differ between orgs.

• Enforce organizational rules, such as allowed regions or required tags
• Audit resources for compliance
• Deny noncompliant deployments
• Aggregate compliance results across subscriptions

• Malware or malicious software
• Command-and-control tools
• Internet surveillance and intrusion software

• ITAR: A U.S. regulation controlling defense-related articles and services; it is not the international arrangement described.
• Palermo Convention: Focuses on transnational organized crime and related protocols, not export controls for cyber weapons.
• GDPR: European data-protection and privacy legislation.

• Document feeder: A scratch, dirt, or debris on the feeder glass or rollers can create a line on every scanned image.
• Pickup rollers: Move paper through the printer; they would not normally create a scanner-only line.
• Corona wire: Affects toner charging and would cause defects on printed output.
• Drum assembly: Also affects printed pages, so faxes and computer print jobs would show the line too.

• Third-party attestation: Provides independent confirmation, often for formal compliance reporting, but is not usually performed frequently.
• Penetration testing: Attempts to exploit vulnerabilities; it focuses on technical security, not overall compliance procedures.
• Vulnerability scans: Identify known technical weaknesses in systems, but do not evaluate whether policies and processes meet compliance requirements.

• The message came from the claimed sender (authentication)
• The message was not altered (integrity)
• The sender cannot easily deny sending it (non-repudiation)

• Attackers can send unsigned phishing emails.
• Attackers may compromise a legitimate account and send signed malicious emails.
• Users may still be tricked by a validly signed message.

• Crash cart: Provides local physical access, not remote access.
• Jump box: A secured intermediary used to reach devices over the normal network; it may be inaccessible if the appliance has not booted.
• Secure Shell (SSH): Requires the device’s operating system and network services to be running properly.

• IRR assumes that interim cash flows can be reinvested at the project’s own IRR. This may be unrealistic, especially when the IRR is very high.
• MIRR assumes reinvestment at a specified rate, usually the company’s cost of capital or another realistic reinvestment rate.

• B: MIRR does not specifically favour projects with long payback periods.
• C: MIRR and IRR can rank competing projects differently.
• D: MIRR is not always higher than IRR; it may be higher or lower depending on the cash flows and reinvestment rate.

• Employees can work from any location, including remote sites and offices worldwide.
• Login can be relatively seamless after the device is registered.
• It does not require distributing additional physical authentication equipment.

• Geotagging: Identifies location, but location alone is not a strong authentication method and may prevent legitimate remote access.
• Smart cards: Provide strong authentication but require card readers and physical cards, increasing equipment and management requirements.
• Time-based logins: Typically involve one-time codes that users must enter, making the experience less seamless and potentially requiring a token or authenticator app.

• Minimum and maximum values
• Number of distinct values
• NULL information
• Other metadata used for pruning

• Amazon EC2 instances — ???????? ?? ?? ??????? CPU, memory ??? instance size ???????? ???????
• AWS Lambda functions — memory configuration ?????????? ???????
• Amazon EBS volumes — volume type ?? size optimize ???? ???????
• ??????? ECS workloads — resource configuration ? cost optimization-?? ???????

• Memory ? compute usage ?????????? ???? custom code ????? ???? development ? maintenance ??????
• Cost allocation tags ???? ????? ??? ?????? ???? ??????? ???; inefficient resource ??????? ?? recommendation ???? ???
• CloudTrail resource ???? ?? API activity ??????, resource utilization ????

• Accept terms of use
• Enter a temporary code or credentials
• Provide basic registration information

• Enterprise authentication — Authenticates organizational users, often with centralized identity services; it is not specifically designed for temporary guest access.
• Ad hoc network — A temporary device-to-device network, not an authentication process.
• WPA3 — A wireless security standard. It protects Wi-Fi access but does not provide the web-based temporary access workflow described here.

1. System prompts can authorize users — No

1. System prompts can reduce TPM consumption — Yes, with qualification

1. System prompts guide generative AI behavior — Yes

• B — Data source settings in Power BI Desktop:

• D — Formula bar in Power Query Editor:

m 
  Excel.Workbook(File.Contents("new path"))

• E — Advanced Editor in Power Query Editor:

• A: Dataset settings in the Power BI service mainly handle credentials and gateway settings, not changing the local file path embedded in the PBIX.
• C: Current File data-load settings control refresh/load behavior, not the source location.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

• The users currently have Office 365 Enterprise E3 licenses assigned directly.
• Assigning Microsoft 365 Enterprise E5 through a group does not automatically remove their directly assigned E3 licenses.
• From the Licenses blade, you can select the E3 product and remove it from all assigned users in one operation. This requires less effort than editing 2,500 users individually.

• Identity Governance manages access reviews, entitlement management, and related governance—not bulk license removal.
• Set-AzureAdUser does not remove product licenses.
• Set-WindowsProductKey applies Windows product keys and is unrelated to Microsoft 365 licensing.

• /27 (255.255.255.224)

• /26 (255.255.255.192)

• /25: Creates only 2 subnets, not 3
• /28: Provides only 14 usable hosts per subnet

• The product is already in production.
• The organization is examining the product’s functions and cost drivers.
• The objective is to reduce cost without reducing perceived value or required quality.

• Kaizen costing focuses on continuous, usually incremental, cost reductions during the manufacturing stage. It is not specifically the systematic examination of a product’s functions.
• Standard costing compares actual costs with predetermined standards; it is a control technique, not a product redesign method.
• Process innovation concerns developing significantly improved production processes, rather than analysing the product’s functions and value.

• Each directory is a separate identity boundary.
• Managing multiple directories increases administrative overhead.
• Users and administrators may need separate identities or additional configuration across tenants.
• Resources in a subscription are associated with one Microsoft Entra tenant.

• Management groups for governance across subscriptions
• Separate subscriptions for divisions when appropriate
• Resource groups to organize resources
• Azure role-based access control (RBAC) to give each division’s administrator access only to their own resources

• User1 (user1@contoso.com) — This is an external guest in the Fabrikam tenant. Assuming the guest uses email one-time passcode authentication, Azure AD emails a passcode to user1@contoso.com.
• User2 (user2@outlook.com) — An Outlook.com address can authenticate with a Microsoft account, so Azure AD uses that account’s authentication rather than sending an email OTP. The fact that User2 has never accessed Fabrikam resources does not by itself trigger OTP.
• User3 (user3@fabrikam.com) — This is an internal Fabrikam user, so the user signs in with the organization’s normal credentials and does not receive a guest OTP.

Manager role

DAX 
Country[Manager] = USERPRINCIPALNAME()

• Sales
• Human Resources

CFO role

• See sales for all countries
• See no Human Resources data

• Do not restrict the Country table or Sales table.
• Apply a filter to Human Resources that always returns false, such as:

DAX 
FALSE()

• Existing measures
• Relationships
• Calculated columns
• Tables and fields
• Existing transformations in the model

• SharePoint folder: Reconnects to the source files. You would likely need to recreate the model and measures.
• Power BI dataflows: Primarily provide reusable data preparation and storage, but they do not automatically provide the existing semantic model and measures.
• Excel workbook: Connects directly to the source file and would also require rebuilding the model and measures.

• Sales revenue is affected because internal sales are recorded at the transfer price.
• Operating profit is affected because revenue changes while costs may remain unchanged.
• Return on investment (ROI) is affected because ROI depends on operating profit and the division’s investment.
• Cost of components purchased is not affected by the transfer price. These are costs incurred when buying components from external suppliers, not the internal price charged for the division’s output.

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings

1. It examines the source MAC address and learns it on the incoming port.
2. It examines the destination MAC address.
3. If the destination MAC is already in the MAC/CAM table, it forwards the frame only through the associated port.
4. If the destination MAC is unknown, it performs unknown-unicast flooding:

• Review administrative-role membership ? PIM access reviews
• Require justification for continued membership ? PIM can require justification when activating or maintaining privileged access
• Alerts about administrator assignment changes ? PIM alerts and notifications
• History of administrator activation ? PIM audit history
• See changes made to Azure resources ? PIM activation/audit information can be correlated with Azure Activity Logs

• Architects design overall Splunk infrastructure and data strategy.
• Administrators manage configuration, access, and system operations.
• Knowledge Managers create and maintain knowledge objects such as data models, field extractions, and event types. They may support pivots, but they are not the primary users of them.

• Customize Opportunity Contact Role
• Add the Opportunity Contact Role related list to the Opportunity page layout

• A PostToolUse hook for file writes under src/api/ that runs the linter.
• A separate PostToolUse hook for API/data processing that normalizes payloads to snake_case.

• Allow only approved MAC addresses
• Limit the number of learned addresses
• Shut down or restrict a port when a violation occurs

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the direct control for limiting MAC addresses on switch ports.
• NGFW: Filters routed network traffic, while this attack targets Layer 2 switch behavior.

• STP elects the switch with the lowest Bridge ID as the root bridge.
• The Bridge ID consists mainly of bridge priority + MAC address.
• If multiple switches have the same priority, the switch with the lower MAC address is preferred.
• STP bridge priority values are configured in increments of 4096, such as 0, 4096, 8192, and so on. 32768 is the standard default value.