EC-Council 312-76 Exam Prep
EC-Council Disaster Recovery Professional (EDRP) (Page 31 )

• Options:

• Answer: The correct choice is A (800-61r3).

• NIST SP 800-61 Rev. 3 is the dedicated guide for incident handling/response and reflects the latest guidance on the incident response lifecycle (preparation, detection/analysis, containment, eradication, recovery, post-incident activity).
• 800-61r2 is an older revision of the same incident response guide.
• 800-53 covers security and privacy controls, not a specific incident response standard.
• 800-171 focuses on protecting CUI in non-federal systems and networks, not incident response guidance.

• Coordinate and manage the assessment team
• Assign assessment activities
• Direct interviews, examinations, and tests
• Ensure the assessment follows the CAP

• Answer key: Lead Assessor — likely wrong
• CAP-based answer: C3PAO

• Amazon DynamoDB — Managed NoSQL database, not PostgreSQL.
• Amazon Athena — Serverless service for querying data in S3; intended for analytics, not OLTP.
• Amazon EMR — Managed cluster platform for big-data frameworks such as Hadoop and Spark.

• An Anypoint VPC provides private network connectivity for CloudHub applications.
• An IPsec VPN tunnel or AWS Direct Connect connects that VPC to the customer’s on-premises network without exposing the database to the public internet.
• The VPC and on-premises firewalls must allow the required traffic, routes, and ports.

• Static IP addresses only identify the application’s outbound traffic; they do not create a private network path to the database.
• A Dedicated Load Balancer does not replace the required network connection to the on-premises environment. It is also unnecessary merely to reach individual databases.
• Moving sensitive databases to a DMZ is not the intended architecture and could reduce their protection.

• Cutover: The old system is replaced immediately. It may be fast, but any failure can cause significant disruption.
• Phased: The system is introduced in stages, which reduces implementation risk but may prolong the transition.
• Pilot: The system is first deployed to a limited group or location. This is useful for testing but does not necessarily minimize downtime for the entire organization.

• You normally do not create a new sensitive information type for credit card numbers. Microsoft Purview already provides a built-in Credit Card Number sensitive information type.
• The required sequence should generally be:

• Server — provides services or resources
• Endpoint — a user device connected to the network
• Ethernet — a networking technology, not a filtering device
• Firewall — filters and controls traffic

• Regional leads — Customer Community Plus

• Capacity planners — External Identity

• Customer Community does not provide the enhanced reporting/dashboard access required by regional leads.
• An Identity license is generally for internal Salesforce identity use and does not fit the external capacity-planning users as well as External Identity.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity and usually does not provide dedicated file-upload malware scanning. It is generally detective rather than preventive.
• C. Load balancer: Distributes traffic among servers and improves availability; it does not inspect documents for malware.
• D. WAF: Helps block web-application attacks such as SQL injection, command injection, and XSS. Although a WAF may inspect upload requests, malware detection in PDF files is more directly addressed by antivirus or content-scanning functionality.

• Field name and label
• Data type
• Reference table
• Default value
• Whether the field is mandatory or read-only
• Field attributes and configuration

• A: Labels and translations are handled through documentation and translation-related records.
• C: Table relationships may be represented through reference fields, but this is not the primary description of the Dictionary.
• D: Spell-checking language data is unrelated to the System Dictionary.

• Assignment
• Decision
• Get Records
• Loop

• Screen flow: Would include a Screen element.
• Inactive version: Inactive status does not restrict the available elements.
• Activated version: Activation status also does not determine the toolbox contents.

• C — Schema.describeSObjects(new String[]{myObject})[0].fields.getMap()

• D — Schema.getGlobalDescribe().get(myObject).getDescribe().fields.getMap()

• A: sObjectType is not used this way, and fieldSet() is not the appropriate method for retrieving all fields.
• B: mySObject.myObject is not valid dynamic Apex syntax.

• Due Date
• Order Date
• Delivery Date

DAX 
Order Date = 'Due Date' 
Delivery Date = 'Due Date'

• Due Date[Date] ? Sales[Due Date]
• Order Date[Date] ? Sales[Order Date]
• Delivery Date[Date] ? Sales[Delivery Date]

• IaaS provides virtualized infrastructure, including VMs, disks, and networking. You manage the guest operating system and software installed on the VM.
• PaaS provides a managed platform for deploying applications without managing the underlying VMs or operating systems. Examples include Azure App Service and Azure Functions.

• The VM keeps its configuration, disks, IP settings, and associated resources.
• The operation may cause downtime.
• You cannot guarantee that it will move specifically to Host2; Azure selects the new host.
• Update management is for update configuration, not host relocation.
• Moving to another subscription does not move the VM to a different physical host.
• Usage location is unrelated to VM placement.

• The requirement explicitly says the organization wants to use SAML to secure Salesforce API access.
• The SAML Bearer Assertion Flow exchanges a SAML assertion for a Salesforce OAuth access token.
• It is intended for server-to-server or other noninteractive integrations where the application has already been authenticated by an identity provider.
• The connected app can be configured so administrators authorize or preauthorize applications that consume the APIs.

• B — JWT Bearer Flow: Uses a signed JWT, not a SAML assertion. It would be appropriate if the requirement specified JWT-based authentication.
• C — SAML Assertion Flow: This is not the standard Salesforce OAuth flow name; the relevant name is OAuth 2.0 SAML Bearer Assertion Flow.
• D — User-Agent Flow: Designed for interactive browser-based authorization, not a SAML-based server-to-server integration.

Correct choices

• DB1: Azure Data Box Heavy
• Virtual machines: Azure Migrate

Why

• Replication with minimal downtime
• A test migration
• Final cutover after validation

• Self-signed certificate: Causes a certificate warning, not incorrect IP resolution.
• Nameserver record: A DNS record problem would typically affect multiple users, not just one.
• IP helper: Relays DHCP or other broadcast traffic between networks; it does not control website name resolution.

• Import mode loads the data into the Power BI model. Visuals query the in-memory model, which generally provides faster calculation and rendering than DirectQuery.
• Import mode also minimizes online processing because report interactions do not send queries back to the dataflow or SQL Server.
• A daily refresh can load data through the previous day, satisfying the freshness requirement without unnecessary hourly processing.

• DirectQuery keeps querying the data source or dataflow during report use, increasing online processing and potentially slowing visuals.
• Adding a gateway enables connectivity for on-premises sources, but it does not remove the performance disadvantages of DirectQuery.
• An hourly Power Automate refresh is unnecessary when the requirement is only data through the previous day and creates additional processing overhead.

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

• Create and manage catalogs of approved IT services
• Govern and publish infrastructure-as-code (IaC) templates, commonly AWS CloudFormation templates
• Control which users can deploy specific products and configurations
• Apply versioning, permissions, and deployment constraints

• AWS Resource Explorer: Searches and discovers AWS resources; it does not govern IaC templates.
• AWS Organizations: Manages multiple AWS accounts, policies, and consolidated billing.
• AWS Systems Manager: Helps operate and manage deployed resources, such as patching and automation, but is not primarily a catalog for governed IaC products.

1. Ensure BOMs can include subcomponents ? Configure an entity relationship

1. Report changes made by engineers ? Enable auditing

• Configure entity relationship
• Configure auditing

• Authentication: Verifies a user’s identity, such as username and password.
• Authorization: Determines what the authenticated user is allowed to access.
• Accounting: Records connection and usage details, such as login time or session duration.

• CIA: Confidentiality, integrity, and availability are broad security objectives, not a specific RADIUS function.
• ACL: An access control list contains permit/deny rules on systems or network devices. RADIUS can support access decisions but is not itself an ACL.
• PEM: Privacy-Enhanced Mail is also associated with certificate and key encoding formats; it is unrelated to RADIUS’s primary purpose.

• Generates a syslog message
• Shuts down the PoE port
• Places the port into error-disabled (err-disabled) state
• Frees the power allocation

• A device starting to draw power does not necessarily generate a syslog message.
• Monitoring does not pause data traffic while checking power.
• Drawing less than the configured minimum does not automatically mean the device has failed and should be disconnected.

• A Layer 2 switch checks the destination MAC address in its MAC address table (CAM table).
• If the destination MAC is unknown, the switch cannot select a specific outgoing port.
• It therefore performs unknown-unicast flooding, sending the frame out every other port in that VLAN.
• The frame is not sent back through the port where it arrived.

• B — Increase provisioned concurrency for Lambda

• D — Refactor the Lambda functions

• E — Use Amazon RDS Proxy

• Multi-factor authentication
• A secure password change for users whose credentials may be compromised

• The Subscribe to Reports user permission.
• At least Viewer access to the report’s folder.
• Access to the report itself.

• Subscribe to Reports: Run Reports is not the relevant Salesforce permission.
• Chatter Subscribe to Reports is not a Salesforce permission.
• Set Running User relates to configuring the user whose permissions determine report results—not subscribing to a report.

• Assign users or their team an appropriate security role.
• Ensure the role has the required table privileges, such as read, create, write, and append.
• Share the app with that security role in the app designer.

• Dynamics administration center: Used for environment and service administration, not routine app access configuration.
• Manage Roles: Not the specific Dataverse area used to define app and data permissions.
• Security Roles: Define what users can access and which operations they can perform.

• Separate accounts/domains create a strong administrative boundary between non-production and production.
• Separate projects provide distinct IAM boundaries, billing, quotas, service accounts, and resources.
• Developers can receive permissions in the development project without automatically gaining access to production.
• Production administrators can be restricted from development resources, supporting separation of duties and least privilege.

• A: Creates excessive project fragmentation without being required by the stated requirement.
• C: Keeps development and production under one account and does not clearly separate administrative duties.
• D: Uses one account and only two projects; it provides some project isolation but weaker organizational separation.

• Remote and global access: Employees can authenticate from anywhere, not just a specific location.
• Seamless login: The device can authenticate in the background, reducing repeated password or MFA prompts.
• Minimal equipment: It uses devices employees already have, rather than requiring separate hardware.

• Geotagging: Identifies location but is not a complete authentication method and can be spoofed.
• Smart cards: Can provide strong authentication, but require cards and often readers, adding equipment and user steps.
• Time-based logins: Restrict access by time but do not verify the user or device adequately.

• The user starts in the corporate portal.
• The portal launches the Salesforce resource.
• The IdP sends the SAML response to Salesforce.

• Connected App + OAuth is for OAuth authorization and API/app access, not this SAML-based seamless login scenario.
• SP-initiated SSO would begin when the user first requests the Salesforce resource and Salesforce redirects them to the IdP. That is not the described starting point.

• Import — Loads data into Power BI. It requires a refresh, so it may not reflect changes within two minutes unless refresh is configured appropriately.
• Live connection — Connects to an existing Power BI semantic model or Analysis Services model; it is not the normal choice for connecting directly to an Azure SQL database.

• A larger question bank with verified answers
• Explanations tied to ISACA exam domains
• Current content aligned with the exam blueprint
• Useful review or progress features

• The inference container image or built-in algorithm
• The location of model artifacts in Amazon S3
• IAM permissions through the execution role
• Optional environment variables and networking settings

1. Create AWS::SageMaker::Model
2. Create an AWS::SageMaker::EndpointConfig that references the model
3. Create AWS::SageMaker::Endpoint that references the endpoint configuration

• AWS::SageMaker::Endpoint hosts a model but does not define the model itself.
• AWS::SageMaker::NotebookInstance provides a development environment.
• AWS::SageMaker::Pipeline orchestrates ML workflow steps.

1. Define Power Platform DLP policies

1. Add custom prompt modifications

1. Conduct adversarial testing

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of unauthorized activity. Security teams can also observe attacker behavior.

• DNS sinkhole: Redirects requests for known malicious domains to a controlled internal server or blocks them. If an infected workstation attempts to contact command-and-control infrastructure, the sinkhole records the request and helps identify the compromised device.

• Tokenization: Protects sensitive data by replacing it with tokens.
• CI/CD: Automates software development and deployment.
• Threat modeling: Identifies potential risks before or during system design.
• Data obfuscation: Makes data harder to understand, but does not detect intruders.

• Restarting the device: May fix software glitches, but would not usually make cable orientation matter.
• Swollen battery: A safety concern, but it would not typically cause recognition only in one cable orientation.
• Failing cable: Possible, but less likely because the problem occurs with this particular device and not other devices of the same type.

• Amazon GuardDuty: Detects suspicious activity and threats using security-related data sources; it is not primarily a software vulnerability scanner.
• Amazon Detective: Helps investigate and analyze the root cause of security findings after an event.
• Amazon Cognito: Provides user authentication and authorization for applications.

• A. Implement retries with exponential backoff

• C. Reduce the frequency and/or size of requests

• B. Use PutRecord instead of PutRecords — PutRecord sends one record per call and does not remove the underlying throughput limitation. It may increase request overhead.
• D. Use Amazon SNS instead — SNS is not a direct fix for Kinesis shard throttling and changes the required streaming architecture.
• E. Reduce KCL consumers — KCL consumers read from Kinesis; they do not solve producer-side PutRecords throttling.

• AWS Budgets lets you create a cost or usage budget and configure alerts when actual or forecasted spending reaches a threshold. Notifications can be sent through email or Amazon SNS.
• Amazon CloudWatch can monitor AWS billing metrics and trigger an alarm when estimated charges exceed a specified amount.

• Amazon SQS is a message queue, not a cost-monitoring service.
• Cost Explorer analyzes spending but does not directly provide threshold notifications.
• AWS Cost and Usage Report delivers detailed billing data for analysis; it does not itself send threshold alerts.

• C — “when the query finishes”

• D — “when the query began”

• BIOS language support: Useful for usability, but not whether the PC can operate electrically.
• Supply chain security: Concerns procurement and hardware trust, not deployment across countries.
• Power efficiency: Important for energy usage, but it does not ensure compatibility with local power systems.

• R-squared: Typically used for regression, not classification.
• RMSE: Measures prediction error for continuous numerical values, so it is not the best fit here.
• Learning rate: A training hyperparameter that controls how quickly the model updates its weights; it is not an evaluation metric.

• Subject: The entity that initiates an action—here, Derrick/user account.
• Object: The resource being accessed— the file.
• Action: Reading the file.

• Correct answer: D – Do not enable default administrative accounts to ensure accountability.

• A – Do not use encryption methods … backups and sensitive information: Encryption helps protect data; not using it increases risk, not reduces insider threats.
• B – Do not allow administrators to use unique accounts during installation: We actually want unique admin accounts, not the opposite.
• C – Do not control the access to administrators and privileged users: Failing to control access directly enables misuse.

Why

cmd 
PowerShell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

Why the other options are less suitable

• GPO logon script: Runs only when a user logs on and may not run during initial VM provisioning.
• GPO startup script: Can work, but requires the VM to be joined to the domain and the policy to be applied. It is also normally evaluated at each startup.
• Place scripts in a VHD: Merely placing scripts on a disk does not cause them to execute.

• Creating and managing users and roles
• Granting and revoking roles and privileges
• Managing access-control responsibilities

• SYSADMIN: Manages warehouses, databases, schemas, and other objects—not primarily users and roles.
• PUBLIC: Automatically granted to every user; it is not an administrative role.
• ACCOUNTADMIN: Has the highest level of access, but should be reserved for account-level administration and emergencies rather than routine security tasks.

• Developed and maintained independently
• Deployed without changing the entire application
• Scaled separately based on demand
• More resilient when another service has problems

• A: Functional testing is useful, but it is not the main practice described.
• B: Automation helps deployment, but the scenario focuses on architectural decomposition.
• C: Multiple locations improve availability, not application modularity.