QUESTION: 117

When a virtual server has an HTTP profile with compression enabled, which traffic is compressed by the BIG-IP?

selected traffic from the BIG-IP to the client
all sever-sid traffic for that cirtual srver
selected traffic from the pool member to the BIG-IP
all client-side traffic for that virtual server

Answer(s): A

An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined, and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. Assume port exhaustion has not been reached.

VirtualServer1
Destination: 10.10.2.102:80 netmask 255.255.255.255
Pool: Pool with 3 members in the 172.16/16 network SNAT Automap configured
Vi rtualServer2
Destination: 10.10.2.102:* netmask 255.255.255.255
Pool: Pool with 3 members in the 192.168/16 network
Vi rtualServer3
Destination: 10.10.2.0:80 netmask 255.255.255.0
Type: IP Forwarding
SNAT1 Source IP: 10.10.0.0 netmask 255.255.0.0 SNAT Address: SNAT Pool with 2 members - 172.16.20.50 and 192.168.10.50
SNAT2 Source IP: All Addresses SNATAddress: 10.10.2.102 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1

A connection attempt is made with a source IP and port of 10.10.100.50:2222 and a destination IP and port of 10.10.2.10:80.
When the request is processed, what will be the source and destination IP addresses?

The request will be droped.
Source IP: 10.10.2.1; Destination IP: 10.10.2.10
Source IP: 10.10.2.102; Destination IP 10.10.2.10
Source IP: Either 172.16.20.50 or 192.168.10.50; Destination IP: 10.10.2.10
Source IP: 10.10.2.1; Destination IP: pool in the 172.16/16 network C

Answer(s): D

Reveal Solution Next Question

QUESTION: 119

Which three parameters could be used to determine whether a connection request will have the source address translated as the request is processed? (Choose three.)

the client’s router’s IP address
the client’s browser’s preferred language
the client’s IP netmask
the client’s TCP port
the client’s IP address
the client IP fragment offset

Answer(s): B,D,E

Reveal Solution Next Question

QUESTION: 120

A BIG-IP has the following objects configured: A SNAT pool with 2 members: 150.10.33.33 and 10.10.1.33 A load-balancing pool with 5 members: 10.10.1.1-10.10.1.5:80 The BIG-IP has two self-IP addresses: 150.10.10.10 and 10.10.1.10 A virtual server at 150.10.30.30:80 that is associated with both the SNAT pool and the load-balancing pool. If a client at IP address 200.10.10.10 initiates a connection to the virtual server, what will the source IP address be in the packets sent to the chosen pool member?

150.10.33.33
10.10.1.33
10.10.1.10
150.10.30.30
200.10.10.10
It could be any of the addresses of the members of the load-balancing pool.

Answer(s): B

Reveal Solution Next Question

Free 201 Exam Braindumps (page: 30)

QUESTION: 117

QUESTION: 118

QUESTION: 119

QUESTION: 120