Financial CFEX Exam Prep
Certified Fraud Examiner (CFEX) (Page 14 )

• The message came from the claimed sender (authentication)
• The message was not altered in transit (integrity)
• The sender cannot easily deny having signed and sent it (non-repudiation)

• Compliance standards: May be a reason in some organizations, but it is not the primary security benefit.
• Increase delivery rates: Digital signatures do not generally improve email delivery.
• Block phishing attacks: Signatures can help recipients verify legitimate messages, but they do not block phishing by themselves.

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• Tokenization: Replaces the value with a nonsensitive token, often reversible through a secure token vault.
• Hashing: Converts data into a one-way fixed-length value, generally used for integrity checks or password storage.
• Obfuscation: A broad term for making data difficult to understand; it is less precise than masking in this context.

• The vulnerability scan identifies a vulnerability.
• The administrator verifies that the vulnerability is not present.
• Therefore, the scan produced a false positive.

• True positive: A vulnerability is reported and genuinely exists.
• False negative: A vulnerability exists, but the scan fails to detect it.
• True negative: No vulnerability exists, and the scan correctly reports no issue.

• 255.255.255.128 = /25: 128 total, 126 usable
• 255.255.255.192 = /26: 64 total, 62 usable
• 255.255.255.224 = /27: 32 total, 30 usable
• 255.255.255.240 = /28: 16 total, 14 usable

• One for the network address
• One for the broadcast address

• 8 total addresses
• 6 usable addresses
• Mask: 255.255.255.248

• Recovery Services vault — stores Site Recovery configuration and recovery metadata.
• Hyper-V site — represents the on-premises Hyper-V environment.
• Azure virtual network — the target network where the replicated VM will run after failover. Since Azure VMs already use the same virtual network, that VNet can be selected as the target.
• Storage account or managed-disk target, depending on the ASR configuration and portal version.
• Provider/agent on the Hyper-V server — enables replication from Hyper-V to Azure.

• Create the field in the CRM on the relevant person records—typically Lead and Contact in Salesforce.
• Give the Marketo Sync User read/write access to the field.

DAX 
Blue Sales = 
CALCULATE( 
    [Total Sales], 
    KEEPFILTERS('Product'[Color] = "Blue") 
)

• CALCULATE evaluates [Total Sales] after applying an additional filter.
• 'Product'[Color] = "Blue" restricts the calculation to blue products.
• KEEPFILTERS ensures the existing filter context is preserved. For example, filters for year, region, or customer remain active. If Color is already filtered, the blue condition is applied as an intersection rather than replacing the existing filter.
• Avoid ALL, because it removes filters and would not maintain the existing context.

1. insert con; ? 1
2. Database.setSavepoint(); ? 2
3. update con; ? 3
4. Database.rollback(sp_admin); ? 4

1. Install a Cassandra-compatible ODBC driver.
2. Configure a data source name (DSN), if required.
3. In Power BI Desktop, select Get Data > ODBC.
4. Choose the configured DSN and connect.

• Microsoft SQL Server database: Connects to SQL Server, not Cassandra.
• OLE DB: Requires a compatible OLE DB provider; this is not the standard choice for Cassandra in Power BI.
• OData: Requires Cassandra data to be exposed through an OData service, which is not the normal direct connection method.

• Third-party attestation: Provides independent confirmation, often for formal compliance reporting, but is not usually performed frequently.
• Penetration testing: Attempts to exploit vulnerabilities; it focuses on technical security, not overall compliance procedures.
• Vulnerability scans: Identify known technical weaknesses in systems, but do not evaluate whether policies and processes meet compliance requirements.

• BCP (Business Continuity Plan): è più ampio e mira a mantenere le funzioni essenziali dell’organizzazione durante un’interruzione. Il DRP è una componente più specifica del BCP.
• Communication plan: stabilisce come comunicare con dipendenti, cittadini e altre parti interessate, ma non ripristina i sistemi.
• IRP (Incident Response Plan): gestisce la risposta iniziale a un incidente di sicurezza, come un attacco informatico, non principalmente il recupero da un disastro fisico.

• HTTPS: Secure web traffic, not general command-line server administration.
• SNMPv3: Secure network monitoring and management, not interactive server login.
• RDP: Provides graphical remote desktop access. It can be secure, but it is not the direct replacement for Telnet in this scenario.
• SMTP: Used to send email.

• Note the question number before leaving—for example, Question 38.
• Use the exam’s question navigator or Back/Previous button to return to that number.
• If you close or refresh the page, your position may not be saved, depending on the site. Reopen the page and select the question number again.
• Avoid using the browser’s Back button if it causes the exam page to reload; use the exam’s built-in navigation instead.

• Code signing: Verifies the software’s authenticity and integrity; it does not hide the source code or prevent reverse engineering.
• Tokenization: Replaces sensitive data with tokens, mainly for protecting data such as payment information—not software logic.
• Blockchain: Provides a tamper-resistant record of transactions or data; it does not protect compiled code from analysis.

• Base table — the table containing common inherited fields
• Parent table — the table directly extended by the child
• Other tables in the hierarchy

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Moving the risk’s financial impact to a third party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity that creates the risk.

• Transport and handling
• Storage and warehousing
• Refrigeration
• Shelf-stacking or replenishment
• Other costs directly attributable to product P

• Streams — track change data for tables or views.
• External tables — reference data stored in an external cloud storage location.

• Role — account-level security object.
• Warehouse — account-level compute resource.
• User — account-level security object.
• Share — account-level object used to share data.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• Regression predicts continuous numeric outcomes, such as house price, temperature, or sales amount.
• Linear regression assumes the target can be estimated from a linear relationship between the input features and the target.
• In Azure Machine Learning, you use a labeled dataset containing:

• Classification predicts a category or class, such as “spam” or “not spam.”
• Clustering groups similar records without a known label; it is an unsupervised learning technique.

• Orders contains order-level information, such as the order date.
• Order Line Items contains the products, quantities, and line amounts associated with each order.
• Merging them on the order key, such as OrderID, places the order date alongside each line item. This allows you to calculate total order value and analyze it over time.
• Product attributes can remain in the Products table and be related to the resulting line-item table through ProductID.

• Merging line items with products addresses product attributes but does not first provide the order-level date and value needed for time analysis.
• DAX calculated columns or lists add unnecessary model complexity.
• Calculating order counts is not the first requirement and does not combine the required order and line-item data.

• Existing expected ROI: 15%
• New project ROI: 14%
• Cost of capital: 12%

• Project return = 14%
• Cost of capital = 12%
• It earns 2% more than the cost of capital, so it should increase shareholder value.

1. Write a structured log entry to CloudWatch Logs containing:

1. Create a CloudWatch Logs metric filter that:

text 
ApiRequests 
Operation=GetOrders 
ResponseCode=500 
Version=2.4.0

• B is incorrect: CloudWatch Logs Insights queries analyze logs but do not directly publish metrics in this manner.
• C is incorrect: ALB access logs do not contain arbitrary Lambda response metadata as custom fields.
• D is incorrect: X-Ray traces and insights are not the appropriate mechanism for creating these custom, dimensioned application metrics.

• Training data for potential bias before model training
• Trained models for bias in predictions
• Model features to help explain how they influence predictions

• A: RAG workflows are typically built using services such as Amazon Bedrock, knowledge bases, and data sources.
• B: Monitoring model quality in production is primarily associated with SageMaker Model Monitor.
• C: Documenting model details is handled by capabilities such as SageMaker Model Cards.

CIMA P3 topics

• IT governance and systems strategy
• Systems development and implementation
• Change and project governance
• Strategic and business risk

• A — Plan for new systems: The committee should help identify and prioritise systems requirements and ensure planned systems support organisational needs.
• D — Consider competitive issues: New information systems may affect Y’s competitive position, service quality and efficiency. These strategic implications should be considered.
• E — Ensure the system meets company goals: This is a key governance responsibility. The committee should ensure the project remains aligned with Y’s objectives and delivers business value.

• B — Develop new systems: Detailed system development should be performed by IT specialists and project teams, not the steering committee.
• C — Manage the project: The project manager should handle day-to-day project management. The steering committee should provide oversight, challenge and key decisions, rather than manage daily activities.

• If the hashes match, the software has likely not changed.
• If they differ, the software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily verify that software was unchanged.
• Baselines: Establish expected configurations or states, but hashing is the specific method for checking file integrity.
• Tokenization: Replaces sensitive data with non-sensitive tokens and is unrelated to software integrity.

• Azure Cosmos DB is a globally distributed NoSQL database service. It stores and retrieves application data, but it does not provide the complete environment for building, testing, and deploying predictive analytics models.
• Azure Machine Learning is the appropriate service for this requirement. It supports creating experiments, training and testing models, and deploying them for predictions.
• Azure Machine Learning Studio provides the browser-based interface for these tasks.

• STP elects the switch with the lowest Bridge ID as the root bridge.
• The Bridge ID consists mainly of bridge priority + MAC address.
• If multiple switches have the same priority, the switch with the lower MAC address is preferred.
• STP bridge priority values are configured in increments of 4096, such as 0, 4096, 8192, and so on. 32768 is the standard default value.

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings

• Install unauthorized or unapproved applications
• Access system areas normally restricted
• Add features unavailable in the default software
• Modify the device’s operating system

• SQL injection (SQLi): Attacks databases by inserting malicious SQL commands.
• Cross-site scripting (XSS): Injects malicious scripts into web pages viewed by users.
• Sideloading: Installs an application from outside the official app store, but it does not necessarily remove the phone’s operating-system restrictions.

• NAT traversal: Helps WAN Edge, vSmart, and vManage devices discover how to reach one another through NAT.
• Initial orchestration: Authenticates and introduces devices when they first join the SD-WAN fabric.
• Connection brokering: Provides information that allows devices to form their required control connections, after which the vBond is generally not in the data path.

• WAN Edge: Forwards user traffic and forms secure tunnels.
• vSmart: Controls the overlay control plane and distributes routes and policies.
• vManage: Provides centralized management, configuration, and monitoring.

• PC A: 192.168.1.10/24
• PC B: 192.168.2.10/24

• Both PCs have a correct default gateway
• A router or Layer 3 switch connects the subnets
• Routing and firewall rules allow the traffic

• VLAN 10 for data
• VLAN 20 for voice

• A: Describes physical trunking or logical switch ports, not an SVI.
• B: An SVI can provide management access, but that is only one use—not the best description here.
• D: SVI use is not related to running out of physical ports.

• DB1 (500 TB): Azure Data Box Heavy

• Virtual machines: Azure Migrate

• The Intune device limit restriction does not apply in the normal way; DEM enrollment supports up to 1,000 devices.
• However, the Microsoft Entra maximum number of devices per user setting can still impose a limit when the enrollment creates an Entra device object.
• Therefore, a DEM account is not automatically unlimited. The effective limit depends on the Entra device setting and the enrollment/join type.

• A. IDS attack signatures: Detects suspicious network activity, but is not primarily designed to scan uploaded files for malware.
• C. Load balancer: Distributes traffic among servers and improves availability; it does not inspect files for threats.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection, but its primary role is not malware scanning of uploaded documents.

• New investment: $536,500
• Resulting NPV: $0

• You can configure different pre-shared keys for different device groups.
• All cameras could use one key.
• All scanners could use another key.
• Each key can be associated with an appropriate role or access policy.

• Asynchronous inference is designed for applications that submit individual inference requests, place them in a queue, and retrieve results later. It is useful when requests may take a long time or when traffic is intermittent.
• Batch transform is designed specifically to run inference over an entire large dataset stored in Amazon S3 and produce an output dataset.

• Large dataset/offline processing ? Batch transform
• Large or slow individual requests processed later ? Asynchronous inference

• Input validation: Prevents malicious or malformed input within an application; it does not authenticate a software package.
• Secure cookies: Protect web-session cookies; they do not protect downloadable software.
• Fuzzing: Tests software by supplying unexpected input to find vulnerabilities; it does not verify software integrity.

• Suspended an operator who refused to use unsafe equipment.
• Paid another operator a bonus for using it.
• Prioritised short-term productivity over employee safety.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — The factory’s safety record is likely to be poor.

• Layer 1: Check cables, power, and link lights.
• Layer 2: Check switching, VLANs, and MAC learning.
• Layer 3: Check IP addressing, routing, and gateways.
• Higher layers: Check services, applications, and user settings.

• Create a plan of action: Decide how to implement the fix.
• Implement the solution: Apply the selected fix.
• Verify functionality: Confirm the problem is resolved and systems work normally.

• transform() — modifies every element in an array
• filter() — keeps elements matching a condition
• exists() — checks whether any element matches
• aggregate() — reduces array elements to one result

sql 
SELECT transform(scores, x -> x * 2) 
FROM student_scores;

• A is incorrect because higher-order functions are mainly useful for nested or complex data.
• B is incorrect because they do not convert logic into Python.
• D is incorrect because their purpose is not to fix slow built-in functions, but to process arrays or maps with custom logic.

• On VirtualNetworkA: enable Allow gateway transit.
• On VirtualNetworkB: enable Use remote gateways.

• Tokens: Individual units of text processed by a model, such as words, subwords, or characters.
• Models: Systems that learn patterns and generate predictions or outputs.
• Binaries: Data represented using the binary number system, not semantic representations.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• A — Improved management of storage space: Correct.

• B — Improved supplier relationships: Correct.

• C — Improved pricing decisions: Correct.

• D — Non-product-specific costs must be apportioned: Incorrect.

• E — Profitability of each customer group: Incorrect.

• A: It allows for branching and merging...

• C: It allows multiple engineers to work against the same code and configuration files and manage differences and conflicts.

• B: Build automation and infrastructure provisioning are handled by CI/CD and automation tools, not by version control alone.
• D: User Stories and backlogs are managed by project-management tools.
• E: Version control stores and tracks code, but it does not itself ensure that developers write effective unit tests.