FINRA Series 63 Exam Actual Questions
Uniform Securities State Law Examination (Page 21 )

• The first step in risk management is to understand objectives, constraints, and drivers from those who care about the project. This stakeholder engagement helps identify what could go wrong and what risks are most critical.
• Only after you’ve gathered input from stakeholders should you identify risks and document them in the risk register. Updating the risk register (option C) is important, but it comes after identifying and analyzing risks.
• Options B (ensure resources) and D (revise the risk management plan) are actions that may follow once risks are identified and understood; they’re not the initial step.

• A — Add a Path for Stage: A Path lets users update the Opportunity’s Stage directly from the record page, without opening the full edit form. It can also display guidance and key fields.
• B — Use a Kanban list view: Users can move Opportunities between stages by dragging records between columns, which is ideal when Stage is the only field they normally change.

• Authenticating websites with TLS/HTTPS
• Enabling certificate-based VPN authentication
• Signing or encrypting email
• Supporting device or user authentication

• VLAN tagging: Uses network-frame tags, such as 802.1Q; it does not rely on X.509 certificates.
• LDAP: May integrate with PKI in some environments, but X.509 certificates are not most commonly associated with LDAP itself.
• MFA: Certificates can be one authentication factor, but X.509 is fundamentally a PKI technology.

• The correct option is B: AWS Storage Gateway.

• Why: The scenario requires backing up on-prem data to AWS without changing existing backup workflows. AWS Storage Gateway provides a hybrid storage solution; specifically, the Tape Gateway emulates a physical tape library, allowing your existing backup software to write to virtual tapes that are stored in AWS (in S3 or S3 Glacier). This lets you back up 10 TB to the cloud while preserving current backup workflows and on-prem infrastructure.

• How it would work: Deploy a gateway appliance or VM on-site, connect your tape-based backup software to the virtual tape library, and start writing to virtual tapes. The data is then archived in AWS, freeing up local storage.

• Why the others aren’t suitable:

• Quick tip: If you weren’t using tape, File Gateway could be another option for file-based backups; Tape Gateway is the right pick for tape-based workflows.

• Correct answer: A: The ITIL service value system (SVS).

• The SVS explains how all components (governance, the service value chain, practices, guiding principles, information and technology, partners and resources, and continual improvement) work together to enable value creation from demand to outcomes.

• B: The ITIL guiding principles describe aspirational guidance for decision-making, not how all components/activities interact.
• C: The four dimensions of service management explain areas to consider (organizations/people, information/technology, partners/suppliers, value streams/processes) but don’t describe the integrated system itself.
• D: A service relationship defines the relationship between provider and consumer, not the overall system of components and activities creating value.

• An IDS monitors network traffic for signs of attacks and raises alerts. It can be deployed out-of-band (via a SPAN/mirror port or a tap) so it analyzes traffic without being inline, meaning it doesn’t measurably affect latency.
• An IPS (intrusion prevention system) is inline and can block threats, but that processing can introduce some latency and potential throughput impact.
• A firewall also inspects traffic and can add latency, though usually modest with proper hardware, but its primary purpose isn’t continuous passive analysis.
• A load balancer distributes traffic and isn’t used for intrusion analysis.

• Ablauf: Er wird in der gleichen Transaktion ausgeführt, bei der z. B. ein Datensatz erstellt oder aktualisiert wird. Der Benutzer wartet, bis der Workflow abgeschlossen ist.
• Stufen: Kann vor dem Vorgang (pre-operation) oder nach dem Vorgang (post-operation) laufen.
• Zweck: Sofortige Validierung oder Anpassung von Daten, ggf. auch das Verhindern eines Vorgangs, wenn Bedingungen nicht erfüllt sind.

• Automatisierte Flows (Power Automate, automatisierte/ Background Flows) laufen asynchron im Hintergrund, nachdem der Trigger erkannt wurde, und blockieren den Benutzer nicht.

• Answer: False. Agents and managers CAN create knowledge articles from Community questions.

• Why: In ServiceNow, a Community question can be converted into a Knowledge article using the Create Knowledge (or Convert to Knowledge) action. This allows what customers asked to become a reusable article for others.

• How it works (high level):

• Permissions: This ability depends on having the right roles/permissions (e.g., agents or knowledge managers). If you don’t see the option, check your role assignments or the knowledge-management configuration.

• Quick take: If a question in Community is valuable for others, a trained agent can turn it into a Knowledge article, making it available for self-service.

• Use a field on Account to show the aggregated yearly shipments (a Roll-Up Summary).
• A Master-Detail relationship between Shipment and Account is required for Roll-Up Summary to work (and to ensure access is governed by the parent Account).
• OWD and the relationship type determine what users can see. If you want to restrict shipment-level access while still showing a summary on Account, Private OWD on Shipment plus Master-Detail helps, because access to shipments is controlled by the Account record.

• A (Public OWD on Shipment with Process Builder and a Lookup to Account): Not ideal. Public access would expose shipments broadly, and a lookup cannot support a built-in roll-up summary.
• B (Private OWD on Shipment, Roll-Up Summary, Master-Detail to Account): Best answer. Private shipments, but because of Master-Detail, access and the roll-up are tied to the Account. The Account can show the yearly total via a Roll-Up Summary field.
• C (Controlled by Parent on Shipment, Trigger, Master-Detail): Master-Detail is correct, but using a trigger is unnecessary for a straightforward roll-up; roll-ups are the standard, maintainable solution.
• D (Private OWD on Shipment, Trigger, Lookup to Account): More complex and not as efficient; no automatic roll-up, and lookup breaks the ease of summarizing by Account.

• Answer: C – netstat -an

• netstat -an lists all active connections and listening ports with numeric addresses, without resolving names. This lets you spot DoS patterns such as a flood of connections to a specific port or many connections from a single or few IPs.
• The other options don’t help as directly:

• Windows: netstat -an and look for numerous ESTABLISHED connections to a service or many SYNs to a port.
• Filter by port, e.g., netstat -an | findstr :80, or on Linux: ss -tunap | grep ':80'.

• Netstat provides a snapshot. DoS detection often benefits from continuous monitoring, flow data, and IDS/IPS logs.

kusto 
Event | where EventType == "error"

• == is the KQL equality operator.
• -eq is a PowerShell operator, not KQL.
• is is not the correct equality operator in this context.

text 
Event | where EventType –eq "error"

• Event | search "error" — valid, broad search.
• search in (Event) "error" — valid, broad search.
• Event | where EventType == "error" — valid, targeted filter.

• A — SCIM synchronizes changes to user attributes from the identity provider to GitHub.
• B — SCIM deactivates GitHub accounts when users are removed or deactivated in the identity provider.
• D — SCIM automates user provisioning when new users are added to the identity provider.

• C: SCIM does not delete organization repositories.
• E: SCIM does not generate REST API authentication tokens.
• F: SCIM handles identity lifecycle management, not repository permission configuration based on roles.

• S3 Lifecycle rules automate actions such as transitioning objects to different storage classes or deleting old objects.
• S3 bucket policies control access permissions; they do not preserve earlier object versions.
• S3 server-side encryption protects data confidentiality by encrypting objects at rest, but it does not prevent deletion or overwriting.

• Accidental deletion or overwriting ? S3 Versioning
• Unauthorized access ? bucket policies and IAM
• Data encryption ? server-side encryption

powershell 
Get-AzureVM -ServiceName <service-name> -Name <vm-name> | 
  Set-AzureStaticVNetIP -IPAddress <private-ip> | 
  Update-AzureVM

• New-AzureRMVMConfig configures VM settings but does not itself assign the static IP.
• Set-AzureSubnet is not the appropriate cmdlet for assigning a VM’s private IP.
• The Azure portal option mentioned in the question was not the intended method for this older deployment model.
• Changing settings in Windows Network and Sharing Center is incorrect because Azure assigns the IP through the VM’s virtual network interface; manually configuring it inside the guest can cause conflicts.

• Actual filename: Document.xml.txt
• Explorer displays: Document.xml
• File type: Text Document (.txt)

text 
Document.txt ? Document.xml

• 25 — Traditional SMTP server-to-server mail transfer; not normally used for secure client submission.
• 110 — POP3, used to retrieve email and typically unencrypted.
• 143 — IMAP, used to access email and typically unencrypted.

• Create a record-triggered Flow on Opportunity.
• Run it when the record is created or updated.
• Add entry criteria such as Probability > 50%.
• Use Create Records to create the related Sales Demo Request, populating its Opportunity lookup.

• Apex Trigger: Possible, but unnecessary custom code for a straightforward automation requirement.
• Workflow Rule: Cannot create a related custom record.
• Process Builder: Could create a record, but Flow is Salesforce’s preferred and more capable declarative automation tool.

• Improve QA testing efficiency: A prototype may help discover defects early, but that is not its greatest benefit.
• Decrease time allocated for user testing and review: Prototyping usually requires additional user involvement and review, not less.
• Minimize scope changes: Prototypes can actually reveal new requirements or cause scope changes. However, discovering those changes early is beneficial.

• Admin access to the deployment pipeline (B) – lets the developers use the pipeline and deploy content.
• Contributor access to the Development and Test workspaces (E) – required to deploy items into those workspaces.
• Viewer access to the Production workspace (D) – lets them view Production content without allowing deployment or modification.

• Contributor access to Production (F), because that could allow changes or deployment there.
• Viewer access to Development/Test (C), because Viewer is insufficient for deployment.
• Build permission to Production semantic models (A), because building reports on a semantic model is not required merely to view Production items.

• runParallel is defined as async, so it returns a Promise.
• To use the result, you attach a then handler (or use await inside another async function).

• A: “Async runParallel() .then(data);” is invalid. “async” is a keyword for function declarations, not something you put in front of a call, and you’d need a function as the then-argument.
• B: “runParallel().done(function(data){return data;});” .done is not standard in native Promises (it exists in some libraries). Without a compatible library, this won’t work.
• C: “runParallel().then(data);” is invalid because then expects a function as its argument; data is not a function.
• D: “runParallel().then(function(data){ return data; });” is valid (or equivalently, runParallel().then(data => data);).

• The robust, standard option is D.
• B could work only with a library that provides .done; otherwise it’s not reliable.

• What it’s asking: In an ARM template, for an Availability Set, what value should you set for the property platformFaultDomainCount to maximize availability during fabric failures or maintenance?

• Key concept: Fault domains are groups of hardware that can fail independently. By spreading VMs across more fault domains, you reduce the risk that a single hardware fault takes out many VMs.

• Important detail: For managed Availability Sets, the number of fault domains you can use varies by region — typically 2 or 3.

• What to choose: Set platformFaultDomainCount to the maximum supported in your region. In most regions this is 3, which gives you the best resilience. If your region only supports 2, you’d use 2.

• Answer: 3 (Max Value). In ARM template syntax, this would appear as "platformFaultDomainCount": 3 (within the Availability Set resource).

• Answer: No.

• Why:

• If you need such an assessment while controlling costs, you’d generally pursue a paid MCS engagement or another option outside of the basic Premier entitlement.

• Failed login attempts
• The account being targeted
• The source user or system
• Time and frequency of attempts

• Two-factor authentication: Helps prevent unauthorized access, but does not primarily detect the employee’s attempts.
• Firewall: Controls network traffic; it generally does not monitor individual login attempts.
• Intrusion prevention system (IPS): Can detect certain network attacks, but this scenario is best addressed through authentication and audit logging.

• The 99.99% availability SLA for VMs is achieved when you run VMs across two or more Availability Zones.
• Two VMs in a single Availability Zone do not meet the 99.99% target (their SLA is lower, e.g., around 99.95% or less depending on configuration).

• Deploy at least two VMs across two different Availability Zones (one VM in each zone, or both in two zones with a load balancer).
• This provides the required zone redundancy and the 99.99% SLA.

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

• A? ??? Aurora Replicas? ?? ??? ???? ?? ???, ?? ???? Network Load Balancer(NLB)? ??????. NLB? ?? 4 ?? ???? HTTP ??? ?? ???(Sticky sessions)? ????? ???? ????.
• ??? ?? ??????? ?? ?? ???? ??? ???? ?? ????? ????? ?? ?? ???(?? ?/??? ??)? ?????. ? ??? ALB?? ?? ????, NLB?? ???? ?????.
• ??? ??? ??? ??? ???? ?? ???? ???? HTTP ???? ??? ALB? ???? ???. A? ? ??? ??????.

• The connecting host keeps the private key securely.
• The destination host stores the corresponding public key in its authorized keys.
• Authentication can occur without a person entering credentials each time.
• SSH also provides encrypted communication and host authentication.

• Biometric: Requires a human user and is difficult to automate.
• Smart card: Often requires user interaction or card access.
• Hard-coded password: Unsafe because passwords stored in scripts or applications can be exposed, reused, or difficult to manage securely.

• In Microsoft Teams Phone System, a single Auto Attendant can handle multiple time-based greetings by using separate schedules for office hours, after hours, weekends, and holidays.
• You can configure one Auto Attendant with four distinct greetings mapped to:

• Open the Teams admin center > Voice > Auto attendants, edit or create an Auto Attendant.
• Under Time-based routing, define four rules:

• Create a Holiday schedule with the relevant dates (e.g., Easter, Christmas) and assign the Holiday greeting.
• Save the configuration.

• If your environment cannot separate weekend from after-hours within a single Auto Attendant, you might technically need more than one Auto Attendant.

• Create Power Query parameters for the Azure SQL server/database—or at least the database name.
• Use the parameter in the PBIX connection.
• Publish the same PBIX separately to the relevant development, test, and production workspaces.
• Set each dataset’s parameter value in the Power BI service so it points to the corresponding Azure SQL database.

• Development dataset ? DevelopmentDB
• Test dataset ? TestDB
• Production dataset ? ProductionDB

• The same PBIX is used for every lifecycle stage.
• Each stage consumes data from its matching database.
• Deployment pipelines are not required.
• Azure SQL is a cloud source, so gateway administration is generally avoided.
• Only the parameter value differs between published datasets, reducing maintenance.

• Assign a Teams license to a user — Licenses are assigned through the Microsoft 365 admin center, Microsoft Entra ID, or PowerShell.
• Deploy the Teams client — The Teams admin center manages Teams policies and apps, but it is not the primary tool for deploying the desktop client.
• Prevent users from creating teams — Team creation depends on controlling the creation of Microsoft 365 groups, generally configured through Microsoft Entra ID and PowerShell rather than directly in the Teams admin center.

• Alice is co-resident on the same physical host and exploits shared hardware (the processor cache) to infer secrets. This is the classic definition of a side-channel attack—information leakage through implementation details (like timing or cache behavior) rather than by breaking a protocol or injecting code.

• Observing cache timing or access patterns to deduce cryptographic keys or plaintext data from the victim VM.

• Man-in-the-cloud attack: targets cloud trust/auth, not local hardware sharing.
• SQL injection: exploits input to run SQL commands, not a VM/caching vector.
• Service hijacking: takes control of a service, not about covert data leakage via shared hardware.

• Notice phrases like “shared hardware resources,” “co-resident,” or “cache”—these indicate a side-channel vector.

• The missing piece is to configure an event source mapping between the DynamoDB stream and the Lambda function. Enabling DynamoDB Streams alone doesn’t trigger the function—you must wire the stream to Lambda so events invoke the function.
• Note that changing StreamViewType (A) only affects what data is delivered (e.g., NEW_IMAGE) and does not trigger invocations. Options C and D are not required for invocation: you don’t need SNS, and increasing the timeout won’t enable the trigger.

• Correct options: C and D.

• The AWS Cloud Adoption Framework (CAF) security perspective focuses on capabilities to protect information and manage security risk.
• Observability (A) is primarily an operations/monitoring capability, not a core security capability under CAF.
• Incident and problem management (B) is IT service management/operations, not specifically a CAF security capability.
• Incident response (C) is a security-focused capability: detecting, containing, and recovering from security incidents.
• Infrastructure protection (D) involves applying security controls to protect the underlying infrastructure, which fits the security perspective.

• wyjasnic istniejace pytania z tej strony,
• wskazac, dlaczego dana odpowiedz jest poprawna lub bledna (z uwzglednieniem celów egzaminu),
• omówic koncepcje zwiazane z Google Cloud AI.

• The correct answer is D: All of the above.

• Snowflake Web Interface (UI): You can create and manage Virtual Warehouses from the UI (resize, suspend/resume settings, etc.).
• SQL commands: You can create and alter warehouses with DDL like CREATE WAREHOUSE and ALTER WAREHOUSE.
• Data integration tools: ETL/ELT tools can create/manage warehouses by connecting to Snowflake and issuing the appropriate commands or using their config to specify a warehouse.

• Wiping securely overwrites the drive so the original data cannot reasonably be recovered. It is generally less expensive than physically destroying the device.
• Recycling could expose the data if the drive is not securely erased first.
• Shredding physically destroys the drive and is effective, but usually more costly and prevents reuse.
• Deletion only removes file references; it is not a secure sanitization method.

• Interactive development and exploration
• Small datasets
• Lightweight transformations or testing
• Avoiding the overhead and cost of multiple workers

• Automated reports: Jobs may benefit from job clusters or SQL warehouses.
• Working with SQL in Databricks SQL: Databricks SQL warehouses are the relevant compute option.
• Automatically scaling for larger data: A multi-node cluster with autoscaling is more suitable.
• Large amounts of data: Distributed worker nodes are generally needed.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• Answer: C (192.168.0.1-192.168.0.99, 192.168.0.101-192.168.0.254)

• Why: The interface is 192.168.0.100/24, so DHCP pools must be within the 192.168.0.0/24 subnet and cannot include the router’s IP (192.168.0.100), the network address (192.168.0.0), or the broadcast (192.168.0.255). Option C provides two ranges that exclude those addresses.

• Why the other options are invalid:

• Answer: D

• The strongest security comes from enforcing access at the storage layer. An IAM policy scoped to the Cognito identity prefix restricts each user to their own S3 prefix (folder), so users can only access their own files regardless of client or server code.
• This per-user isolation reduces risk of cross-user data access and is more robust than UI validation or Lambda/API validation alone.
• Implementation note: attach a policy to the Cognito identity role that allows actions on arn:aws:s3:::your-bucket/${cognito-identity.amazonaws.com:sub}/* (per-user prefix). Ensure TLS in transit and enable at-rest encryption (SSE-S3 or SSE-KMS). Use multipart upload for large files up to 300 MB.

• Geo-redundant storage (GRS) replicates data to a secondary Azure region, but the secondary copy is normally unavailable for read access.
• RA-GRS provides geo-replication and read-only access to the secondary region, satisfying all requirements.
• Zone-redundant storage (ZRS) replicates data across availability zones within the same Azure region, not separate geographic regions.
• Locally redundant storage (LRS) keeps copies within a single datacenter or region and does not provide geographic resiliency.

• Domeny tworza restrykcjony razem z typem. Wykorzystujesz je w kolumnach, aby miec spójna walidacje danych w wielu miejscach.
• To nie jest pelny niestandardowy typ z wlasnym input/output funkcjonowaniem. Aby stworzyc typ z wlasnym I/O i operacjami, uzylbys CREATE TYPE (lub rozszerzen w C). Domeny to uproszczona forma ograniczen na istniejacy typ.

• CREATE DOMAIN positive_int AS integer NOT NULL CHECK (VALUE > 0);
• CREATE TABLE orders (id serial, qty positive_int);

• latwo wymuszaja wspólne reguly dla wielu kolumn/naglówków,
• zmiana regul w jednym miejscu (domena) automatycznie wplywa na wszystkie kolumny ja uzywajace.

• The mapping and resolution of endpoint identities (EIDs) to their location (RLOCs) in an SD-Access fabric is handled by the control plane using the LISP protocol.
• Why not the others:

• Approval publish: Request approval from a manager of the knowledge base before moving the article into the publish state.
• Instant Publish: Immediately publishes a draft article without requiring an approval.
• Instant Retire: Immediately retires a published article without requiring an approval.
• Retire Knowledge: Moves a knowledge article to the retired state.

• These are the base knowledge workflows that control how articles move between states (Draft, Published, Retired) and whether approvals are required.
• The other options describe different lifecycle actions, but these four cover the standard publish/retire workflows in ServiceNow.

• Basic: Self-help only; no technical support or design assessment.
• Developer/Standard: Technical support, but generally not the full proactive architecture guidance required here.
• Professional Direct: Includes proactive guidance and architecture recommendations.
• Premier: Also supports this, but is not the minimum-cost option.

• If the account name includes the parsed search string, show the element; otherwise hide it.
• In CSS, to show an element you can set display to a visible value (commonly 'block' for block-level elements), and to hide you set display to 'none'.

• The ternary should map true to a visible display value and false to 'none'.
• Therefore the placeholder should be replaced with 'block' : 'none' (so the code becomes: accountName.includes(parsedSearchString) ? 'block' : 'none').

• There are several typos in the snippet (e.g., quesrySelectorAll, toLOwerCase, Style.display). In a working version you’d also fix those to document.querySelectorAll, account.innerHTML.toLowerCase(), and account.style.display.

• IaaS: You deploy and manage virtual machines, operating systems, disks, and networking. Azure manages the physical datacenter and host infrastructure.
• PaaS: Azure manages the operating system and runtime so you can focus on deploying applications, such as with Azure App Service or Azure Functions.
• SaaS: You consume a complete, provider-managed application.

• A: True. You can change the size of a Virtual Warehouse after creation (via UI or ALTER WAREHOUSE).

• B: True. A warehouse can be resized while it’s running; the resize will take effect without needing to stop queries.

• C: True. A warehouse can be configured to suspend after a period of inactivity (AUTO_SUSPEND).

• D: True. A warehouse can be configured to auto-resume when new queries are submitted (AUTO_RESUME).

• Global Unicast: These are the IPv6 addresses that are globally routable on the Internet. They’re allocated by Regional Internet Registries (RIRs) and can be reached from anywhere with proper routing (similar to IPv4 public addresses). Example ranges include 2000::/3.

• Link-local: fe80::/10. Used only on the local link; not routable beyond the directly connected network.

• Unique Local Addresses (ULA): fc00::/7. Private addresses for internal use within an organization; not publicly routable on the Internet (like IPv4 private addresses).

• Multicast: ff00::/8. One-to-many addresses used for group communication, not unicast routing.