Fortinet FCP_FAZ_AD-7.4 Exam Prep
FCP - FortiAnalyzer 7.4 Administrator (Page 16 )

1. The original app version exists.
2. You create and publish a new version, so there are now two versions.
3. When you restore the previous version, Power Apps does not delete or overwrite the newer version. Instead, it creates another version based on the restored one.

• Original version
• Newly created and published version
• New version created by the restore operation

• Customer information must not be revealed ? PII Detection
• Malicious instructions embedded in images/documents must be blocked ? Prompt Shields

• If the question allows multiple selections, choose PII Detection and Prompt Shields.
• If it requires one selection specifically for the image-based threat, choose Prompt Shields.

• Custom domains: Supported by Basic and higher tiers.
• Dedicated compute: Basic and Standard use dedicated virtual machine instances; Free and Shared use shared infrastructure.
• Load balancing between instances: Standard provides scaling across multiple instances with load balancing.
• Storage: Standard provides more storage than Basic.
• Cost: Standard is the least expensive option that satisfies all the stated requirements.

• Free/Shared: Use shared compute and have limited features; they don’t meet the dedicated-compute requirement.
• Basic: Provides dedicated compute and custom domains, but does not provide the required Standard-level multi-instance capabilities in the exam’s feature comparison.

• Accept terms of use
• Enter a temporary code or credentials
• Provide basic registration information

• Enterprise authentication — Authenticates organizational users, often with centralized identity services; it is not specifically designed for temporary guest access.
• Ad hoc network — A temporary device-to-device network, not an authentication process.
• WPA3 — A wireless security standard. It protects Wi-Fi access but does not provide the web-based temporary access workflow described here.

• STP elects the switch with the lowest Bridge ID as the root bridge.
• The Bridge ID consists mainly of bridge priority + MAC address.
• If multiple switches have the same priority, the switch with the lower MAC address is preferred.
• STP bridge priority values are configured in increments of 4096, such as 0, 4096, 8192, and so on. 32768 is the standard default value.

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

• Box 1: No — The rule requires user.department to equal Engineering. Engineer does not match, so User1 is not in AU1. Admin1 cannot reset User1’s password.
• Box 2: No — Admin1’s role is scoped to AU1 and cannot manage users outside that AU.
• Box 3: Yes — Admin2 is a Global Administrator and can reset User3’s password.

• SAS (Serial Attached SCSI):

• SSD (solid-state drive):

• Access List: controls whether a client is allowed or denied.
• Connect List: controls which wireless networks/APs a station may connect to.

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• Custom domain: miami.weyland.com requires a paid App Service tier; Free and Shared are unsuitable.
• Two instances: Standard supports scaling to multiple instances.
• SSL: Standard includes SSL support.
• 12 GB storage: Basic provides only about 10 GB, so it does not meet the requirement. Standard provides substantially more storage.
• Cost minimization: Standard is the lowest tier among the choices that satisfies all requirements.

• Sustainability
• Performance efficiency
• Reliability

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• Disabling a compromised account
• Blocking a malicious IP address
• Isolating an endpoint
• Creating or escalating an incident ticket

• Virus signatures: Primarily associated with antivirus or endpoint protection.
• Security agent deployment: Usually handled by endpoint-management or security-agent platforms.
• Vulnerability scanning: Typically performed by vulnerability-management tools.

• Accept: Acknowledging the risk and choosing not to take additional action.
• Transfer: Shifting the risk or financial consequences to another party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or access restrictions.
• Avoid: Eliminating the activity that creates the risk.

• The audience and stakeholders
• The complexity and type of requirements
• The communication method and level of detail needed
• Whether to use diagrams, models, documents, demonstrations, or slides

• B: Authority to host the presentation is not the key preparation activity.
• C: Stakeholder sign-off may occur later; presenting requirements does not always require formal approval beforehand.
• D: A scribe may be useful in a meeting, but hiring one is not a core preparation requirement for presenting.

• A — Capacity: The system must handle all current records and anticipated future records. A system that cannot cope with volume will quickly become ineffective.
• C — Accuracy: Academic records are critical, so the new system must be at least as accurate as the existing system and comparable systems. Poor accuracy could cause serious administrative and reputational problems.
• D — Integration: Linking with the university’s financial systems supports consistency and avoids duplicate data entry, especially for registration, deregistration and fee-related transactions.

• B — Parallel running: This is a useful implementation and risk-control technique, but it is not an essential feature of the system itself. It may also be expensive and time-consuming.
• E — Internet access for all information: This creates significant confidentiality and security risks. External access might be needed for selected services, but unrestricted access to all information is not essential and would be inappropriate for student records.

• CSIRT: A Computer Security Incident Response Team that handles and coordinates incident response.
• CVSS: A scoring system used to rate the severity of vulnerabilities.
• SOAR: Security Orchestration, Automation, and Response technology used to automate security workflows.

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.

• Least privilege: Limits users to only the access necessary for their job.
• Background checks: Help identify potentially risky individuals before employment.
• Separation of duties: Ensures that one person cannot complete a sensitive process alone, reducing fraud and abuse.

• Error correction (ECC): Improves data reliability but does not maximize bandwidth.
• RAM voltage: Increasing voltage may affect stability or speed, but it is not the primary method for increasing module bandwidth.
• Physical module size: Refers to the capacity or form factor of the RAM, not its data-transfer bandwidth.

• Deterrent control: The signs warning people they may be filmed discourage unauthorized or malicious behavior. They may prevent incidents by influencing behavior, but their primary purpose is to deter.
• Detective control: The CCTV system monitors and records activity so security personnel can identify suspicious or unauthorized actions.

• Preventive: Blocks or prevents an incident, such as a lock or access-control system.
• Corrective: Fixes or restores systems after an incident.
• Directive: Tells people what they must do, typically through policies or procedures.
• Compensating: Provides an alternative control when the preferred control cannot be used.

• Owner, Contributor, and Network Contributor provide sufficient management permissions.
• Reader can view Traffic Analytics data but cannot enable or configure it.

• A is correct: It establishes the revised dates and identifies the effect on the critical path.
• B is premature: Stakeholders should be informed after the impact has been assessed and the updated schedule is understood.
• C is not automatically appropriate: Fast-tracking may introduce additional risk and should be considered only after analyzing schedule options.
• D is premature: Adding resources may not resolve a dependency and could increase costs without addressing the actual constraint.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• Group1 — security-enabled: Eligible.
• Group2 — mail-enabled and security-enabled: Eligible because it is still a security group.
• Group3 — Microsoft 365 group: Not eligible for group-based licensing.
• Group4 — Microsoft 365 group, not security-enabled: Not eligible.

• Amazon SageMaker — charges apply for compute, storage, and other resources used.
• AWS Config — generally charges for configuration recording and rule evaluations.
• Amazon CloudWatch — has a limited free tier, but many metrics, logs, alarms, and API usage can incur charges.

• BCP (Business Continuity Plan): è più ampio e mira a mantenere le funzioni essenziali dell’organizzazione durante un’interruzione. Il DRP è una componente più specifica del BCP.
• Communication plan: stabilisce come comunicare con dipendenti, cittadini e altre parti interessate, ma non ripristina i sistemi.
• IRP (Incident Response Plan): gestisce la risposta iniziale a un incidente di sicurezza, come un attacco informatico, non principalmente il recupero da un disastro fisico.

1. It examines the source MAC address and learns it on the incoming port.
2. It examines the destination MAC address.
3. If the destination MAC is already in the MAC/CAM table, it forwards the frame only through the associated port.
4. If the destination MAC is unknown, it performs unknown-unicast flooding:

DAX 
Blue Sales = 
CALCULATE( 
    [Total Sales], 
    KEEPFILTERS('Product'[Color] = "Blue") 
)

• CALCULATE evaluates [Total Sales] after applying an additional filter.
• 'Product'[Color] = "Blue" restricts the calculation to blue products.
• KEEPFILTERS ensures the existing filter context is preserved. For example, filters for year, region, or customer remain active. If Color is already filtered, the blue condition is applied as an intersection rather than replacing the existing filter.
• Avoid ALL, because it removes filters and would not maintain the existing context.

• 25 – Traditional SMTP server-to-server mail transfer; often blocked for client submission and not inherently secure.
• 110 – POP3 for receiving email; unencrypted by default.
• 143 – IMAP for accessing email; unencrypted by default.
• 587 – Authenticated email submission and commonly secured with TLS.

• The ERSPAN source is the device or interface whose traffic is being copied.
• The ERSPAN destination is the device receiving the encapsulated copy and forwarding it to the traffic analyzer.
• The local monitor session number is locally significant. Therefore, the source and destination do not need matching session IDs such as 47 or 48.
• The erspan-id identifies the ERSPAN stream and must correspond between the source and destination configuration.

• Transport and handling
• Storage and warehousing
• Refrigeration
• Shelf-stacking or replenishment
• Other costs directly attributable to product P

• B — Data source settings in Power BI Desktop:

• D — Formula bar in Power Query Editor:

m 
  Excel.Workbook(File.Contents("new path"))

• E — Advanced Editor in Power Query Editor:

• A: Dataset settings in the Power BI service mainly handle credentials and gateway settings, not changing the local file path embedded in the PBIX.
• C: Current File data-load settings control refresh/load behavior, not the source location.

• A class/teacher fact should contain one row per Class ID. It can support the count of classes and contain attributes such as Teacher First Name and Period Number.
• An attendance fact should contain one row per attendance event, such as Class ID + student + date. It supports attendance counts by day and monthly averages.

• Teacher First Name ? Teacher fact
• Period Number ? Attendance fact

• Third-party attestation: Provides independent confirmation, often for formal compliance reporting, but is not usually performed frequently.
• Penetration testing: Attempts to exploit vulnerabilities; it focuses on technical security, not overall compliance procedures.
• Vulnerability scans: Identify known technical weaknesses in systems, but do not evaluate whether policies and processes meet compliance requirements.

• Early units show relatively large time savings.
• Later units still take less time, but the reduction becomes progressively smaller.
• The curve therefore becomes flatter as production approaches 256 units.

• B: The reduction is not constant; learning normally diminishes over time.
• C: Time does not reduce at an increasing rate.
• D: A steady state may eventually be reached, but the question concerns the first 255 units while learning is still occurring.

• Red team: Offensive security; attempts exploitation and simulates attackers.
• Blue team: Defensive security; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team activities to improve defenses, but is not the best direct answer here.
• White team: Usually oversees or coordinates an exercise, including rules of engagement and scope.

• Due diligence: Researching and evaluating a third party before entering or continuing a business relationship.
• Internal audit: Evaluates controls within the organization itself.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.
• Attestation: A formal statement or report—such as a SOC 2 report—provided by an independent party about an organization’s controls.

• Key-based authentication: Provides an endpoint secured with API keys.
• Real-time REST access: Supports online inference through an HTTP/REST endpoint.
• No VM vCPU quota consumption: Microsoft hosts and manages the underlying infrastructure, so your subscription’s VM quota isn’t used.

• Batch: Intended for asynchronous, large-volume processing rather than real-time requests.
• Self-hosted container: You manage the infrastructure and typically need compute resources and quota.
• Standard: This is not the clearest deployment type for the stated requirements; the specific Foundry option is serverless API.

• Microsoft Purview portal: Create and manage sensitivity labels and configure support for sensitivity labels used with Office files in SharePoint and OneDrive.
• SharePoint admin center: Primarily manages SharePoint settings. Older guidance and PowerShell procedures used SharePoint tenant configuration, which can make this question confusing.
• IRM: Concerns Information Rights Management and is a separate protection mechanism; it should not be used to identify the portal for configuring Microsoft Purview sensitivity labels.

• Reconnaissance: Gathering information about the target.
• Weaponization: Creating or combining a malicious payload with a delivery method.
• Delivery: Sending the payload, such as through phishing.
• Exploitation: Triggering a vulnerability or weakness to gain execution or access.

• terraform apply
• terraform destroy

• Power BI dataset — Reuses the existing tables, relationships, and measures. You mainly create new visualizations.
• SharePoint folder — Connects to the source files, but you would need to rebuild the model and measures.
• Power BI dataflows — Primarily provide reusable data preparation; they do not automatically provide the existing report’s measures and model.
• Excel workbook — Requires reconnecting to and modeling the source data again.

• Wireshark captures packets and allows you to examine their contents, potentially revealing usernames and passwords sent without encryption.
• Netcat creates network connections and can send or receive data, but it is not primarily a packet-analysis tool.
• Nessus scans for known vulnerabilities and configuration issues; it generally would not prove that credentials are visible in transit.
• Nmap performs network discovery and port/service scanning, not detailed packet-content inspection.

• A script of cloud CLI commands: IaC because the commands can be saved, reviewed, versioned, and rerun consistently.
• Manually run curl commands: Not necessarily IaC; they are manual actions unless organized into an automated script.
• A sequence of REST requests passed to an API: Could represent automation, but the wording does not explicitly say they are stored and executed as reusable code.
• Commands entered into a cloud console: Manual operation, not IaC.

• New investment: $536,500
• Resulting NPV: $0

Correct reasoning

• Create storage5 as a General-purpose v2 (StorageV2) account.
• Configure Blob object replication from storage5 to an existing compatible storage account.
• The destination must support object replication—typically another StorageV2 or premium block blob account.
• Blob versioning must be enabled on both accounts.
• Blob change feed must be enabled on the source account.
• The accounts must meet Azure’s object-replication requirements, including being in supported regions and having compatible configuration.