Fortinet FCP_FMG_AD-7.6 Exam Actual Questions
FCP - FortiManager 7.6 Administrator (Page 5 )

• Answer: C — Spot Instances

• Why: The workload is a test environment that can be interrupted and does not need to run continuously. Spot Instances let you bid on unused EC2 capacity at a deep discount, making them the most cost-effective option for interruptible workloads.

• Why not the others:

• Quick tips:

• A. Flash the BIOS: Not the first move. A BIOS update can be risky when POST is failing. It’s better to first rule out simpler causes (like RAM seating). BIOS flashing is usually done if the CPU isn’t supported by the current BIOS, which you’d check after RAM seating.

• B. Check the CMOS battery: Possible but unlikely the immediate cause. CMOS battery issues would more likely cause BIOS settings to reset or clock problems. RAM seating is a more common, direct fix after a motherboard swap.

• D. Reinstall the old motherboard: Not a troubleshooting step for the new system. The goal is to get the new motherboard to POST, not revert to old hardware.

• C. Reseat the RAM: Correct because memory seating problems are the most common cause of POST failures after a motherboard swap. Re-seating ensures proper contact in the new board’s slots.

• Ablauf: Er wird in der gleichen Transaktion ausgeführt, bei der z. B. ein Datensatz erstellt oder aktualisiert wird. Der Benutzer wartet, bis der Workflow abgeschlossen ist.
• Stufen: Kann vor dem Vorgang (pre-operation) oder nach dem Vorgang (post-operation) laufen.
• Zweck: Sofortige Validierung oder Anpassung von Daten, ggf. auch das Verhindern eines Vorgangs, wenn Bedingungen nicht erfüllt sind.

• Automatisierte Flows (Power Automate, automatisierte/ Background Flows) laufen asynchron im Hintergrund, nachdem der Trigger erkannt wurde, und blockieren den Benutzer nicht.

• The correct answer is Mass Transfer Tool.

• The Mass Transfer Records tool is Salesforce’s built-in way to reassign ownership of existing records in bulk. In this scenario, you need to transfer ownership of the departed rep’s accounts and opportunities to a new rep while keeping the team structure intact.

• Go to Setup > Data Management > Mass Transfer Records.
• Choose the object: Accounts (and then Opportunities, if needed).
• Set “Transfer From” (the leaving rep) and “Transfer To” (the new rep).
• Decide whether to transfer related records as well (e.g., opportunities tied to accounts) and proceed.
• Review and confirm.

• Data Loader / Data Import Wizard are for bulk import/export, not bulk reassigning ownership.
• Dataloader.io is a third-party tool; the built-in Mass Transfer tool is the standard Salesforce method for this task.

• Event | search "error"
• Event | where EventType == "error"
• search in (Event) "error"

• Correct answer: A. System characterization

• Why the other options are not correct:

• Answer: No

• Why: Using several Azure AD directories (tenants) would create separate identity stores for each division, which significantly increases administrative overhead. You’d need cross-tenant access management, separate governance, and duplicated admin efforts, which goes against the goal of minimizing administrative work.

• How to meet the goal instead:

• A. Custom and standard objects have standard fields. True. Both object types include standard fields (for example, CreatedDate, LastModifiedDate, Owner). Custom objects also have the Name field, which is a standard field on all objects.
• B. Standard objects are included with Salesforce. True. Standard objects (like Account, Contact, etc.) come with Salesforce out of the box.
• C. A new standard object can be created. False. You can create custom objects, but you cannot create new standard objects.
• D. Only standard objects support master-detail relationships. False. Master-detail relationships can be used with both standard and custom objects.

• A — SCIM synchronizes changes to user attributes from the identity provider to GitHub.
• B — SCIM deactivates GitHub accounts when users are removed or deactivated in the identity provider.
• D — SCIM automates user provisioning when new users are added to the identity provider.

• C: SCIM does not delete organization repositories.
• E: SCIM does not generate REST API authentication tokens.
• F: SCIM handles identity lifecycle management, not repository permission configuration based on roles.

• Correct answer: A — The degradation of a service.

• Why: A service request is a formal request from a user for something that is pre-approved and routine (e.g., provisioning a laptop, replacing a toner cartridge). Those are typical service request actions. The degradation of a service, however, is an incident: it describes a problem affecting service quality or availability and is handled by Incident Management (and possibly Problem Management), not as a standard service request.

• Quick note on the other options:

• Windows 10 VMs
• Windows Server 2012 or later VMs
• Running VMs—they do not need to be shut down
• Debian 8.2+ VMs, assuming the specific version is supported
• Stopped or deallocated VMs

• In ServiceNow, each customer typically gets their own instance (prod, dev, test). This means the architecture is multi-instance, not a single instance.
• A single-instance, multi-tenant setup would be one shared instance serving many tenants. ServiceNow uses separate instances per customer (data and configuration isolated per tenant), so it is not a single-instance, multi-tenant architecture.
• In practice: you access a customer’s instance like customerA.service-now.com; other customers have their own distinct instances. The platform code is shared, but the data/configuration are isolated per instance.

• The standard Enterprise Architecture domains are: Business, Data, Application, Technology (BDAT).

• A: Business, strategy, application and technology — includes business and application/tech but uses “strategy” instead of data.
• B: Zachman, TOGAF, Cobit, and Heath architectures — names frameworks, not domains.
• C: Business, data, infrastructure and technology — has business, data, and technology; lacks a distinct application domain (uses “infrastructure” instead).
• D: Process, database, software and technology — covers data (database), application (software), and technology, but omits business.

• The four BDAT domains (business, data, application, technology) is the conventional model you should study.
• None of the options perfectly lists all four BDAT domains. The closest are C (if you map infrastructure to technology) and D (data/application/technology but no business).

• All authentication events must be processed by PolicyApp. By using two separate topics, you can route sign-in and sign-out events to the same app (via subscriptions pointing to PolicyApp), ensuring both types are processed.
• Sign-outs must be processed as fast as possible. Isolating sign-out events on their own topic/subscription lets you scale and prioritize that path independently from sign-ins, reducing contention and latency.
• Decoupling the flows provides better control and RBAC granularity. You can apply different access controls and scaling policies per topic/subscription if needed.
• A single subscription with a subject filter (e.g., subjectBeginsWith) would still require handling both event types and wouldn’t offer the same isolation and independent scaling benefits as separate topics and subscriptions.

• TCP is connection-oriented. It establishes a connection before data transfer using a three-way handshake (SYN, SYN-ACK, ACK), enabling reliable delivery, ordering, and flow control.

• UDP is connectionless. It sends datagrams without a prior connection and provides no guarantee of delivery, order, or protection against duplicates; any reliability is up to the application.

• B incorrectly states UDP uses acknowledgment packets; UDP has no built-in ACKs.
• C wrongly claims UDP provides reliable transfer and that TCP is connectionless.
• D misstates framing bits; neither protocol uses the listed TCP/UDP handshake bits in frames.

• Used for communication on the local link or LAN segment
• Automatically generated on IPv6-enabled interfaces
• Not routed by routers to other networks
• Commonly used by devices to communicate with their local IPv6 router
• Begins with FE80 through FEBF

• FC00::/7 — unique local unicast
• FE80::/10 — link-local unicast
• FF00::/8 — multicast
• 2000::/3 — global unicast

• A) You can only apply a single template BOM to a service object.

• C) You can modify or delete lines in a BOM template regardless of whether the template has been associated to a service object, or not.

• B) You can apply many template BOMs to a service object — false; typically only one template per service object.
• D) You can modify/delete lines only if not associated — false; you can modify templates even after association (per C).

• Correct answer: All four statements are true (A, B, C, and D). The given key (A,B) is likely incorrect.

• A) Customers can change the size of the Warehouse after creation — Yes. You can resize a virtual warehouse after it’s created using ALTER WAREHOUSE ... SET WAREHOUSE_SIZE.
• B) A Warehouse can be resized while running — Yes. Snowflake supports online resizing; you can change the size without stopping queries.
• C) A Warehouse can be configured to suspend after a period of inactivity — Yes. You can enable auto-suspend with a delay (AUTO_SUSPEND).
• D) A Warehouse can be configured to auto-resume when new queries are submitted — Yes. You can enable auto-resume (AUTO_RESUME) so a suspended warehouse automatically resumes on new queries.

• Example commands:

• Even if a warehouse is resizing or auto-suspending, queries will be queued and then executed once the warehouse has the appropriate capacity.

• Correct answer: B

• To have a Lambda function reach an RDS instance inside a VPC, the function must run inside the VPC and have permission to manage ENIs. That requires the IAM policy AWSLambdaVPCAccessExecutionRole on the Lambda execution role.
• The RDS security group must allow inbound connections from the Lambda function’s security group (SG). This enables the DB port (e.g., 3306) to be accessible from the Lambda.

• A: Uses only AWSLambdaBasicExecutionRole (logs to CloudWatch). No VPCAccess permissions, so the Lambda cannot attach ENIs to the VPC or access resources in private subnets.
• C: Combines BasicExecutionRole with an interface VPC endpoint. An interface endpoint for Lambda is unnecessary for DB access and does not provide the needed ENI/VPC connectivity to RDS.
• D: Uses VPCAccessRole but still relies on an interface VPC endpoint with a permission model for lambda:InvokeFunction. This endpoint doesn’t enable connectivity to RDS; it’s about invoking Lambda itself via PrivateLink, not about network access to the DB.

• As the project progresses, you gain information, refine requirements, and lock down baselines (scope, schedule, cost). This reduces overall risk and uncertainty because more is known and addressed.
• At the same time, changes become more costly over time. Later changes can affect already approved baselines, cause rework, impact the critical path, require more coordination, and incur penalties or delays, all of which raise the cost of making changes.

• Correct answer: S3 Versioning

• Why the other options aren’t suitable for this protection:

• Quick tip: For enhanced protection, enable Versioning (and consider related features like Object Lock for write-once scenarios in specific compliance cases).

• L2TP uses UDP port 1701 for the L2TP control channel.
• The destination port is 1701; the source port is a dynamically chosen ephemeral port on the client (not 1701).
• Therefore the statement that both source and destination ports are 1710 is incorrect (and 1710 is not the standard L2TP port).

• The destination port should be 1701, not 1710.
• The source port should be an ephemeral port chosen by the client, not 1701.

• Answer: D

• The strongest security comes from enforcing access at the storage layer. An IAM policy scoped to the Cognito identity prefix restricts each user to their own S3 prefix (folder), so users can only access their own files regardless of client or server code.
• This per-user isolation reduces risk of cross-user data access and is more robust than UI validation or Lambda/API validation alone.
• Implementation note: attach a policy to the Cognito identity role that allows actions on arn:aws:s3:::your-bucket/${cognito-identity.amazonaws.com:sub}/* (per-user prefix). Ensure TLS in transit and enable at-rest encryption (SSE-S3 or SSE-KMS). Use multipart upload for large files up to 300 MB.

• 345 Patch management: 3.0 - Implementation
• 346 Obfuscation: 2.0 - Architecture and Design
• 347 Host isolation: 4.0 - Operations and Incident Response
• 348 IoT unencrypted traffic: 1.0 - Threats, Attacks and Vulnerabilities
• 349 Tabletop exercise: 4.0 - Operations and Incident Response
• 350 CVSS: 1.0 - Threats, Attacks and Vulnerabilities
• 351 Conflict of interest: 5.0 - Governance, Risk and Compliance
• 352 Fail-open (availability focus): 4.0 - Operations and Incident Response (can vary by version)

• User1 can sign in because the account is cloud-only. It does not depend on the on-premises domain.
• User3 can sign in because the account uses Password Hash Synchronization (PHS). Azure AD has a synchronized password hash and can validate the sign-in even when connectivity to on-premises Active Directory is unavailable.
• User2 cannot sign in because the account relies on Pass-through Authentication (PTA). PTA sends the authentication request to an on-premises PTA agent, which must contact a domain controller. With the internet connection from on-premises lost, that validation cannot occur.

• Catalog Items are the basic units users can request from the Service Catalog.
• Order Guides are bundles that group related catalog items so a user can place multiple items in one order.
• Record Producers are catalog items that, when submitted, create a new record in a specified table (for example, creating a new Incident or a custom record).

• Quick context: In a three-tier network (Access, Distribution, Core), roles are:

• Why A is correct: The Distribution layer runs Layer 2 and Layer 3 technologies. It often handles VLAN access (L2) and can perform inter-VLAN routing or connect to the core (L3). So it makes sense for the distribution layer to support both L2 and L3.

• Why B is correct: The Core layer is designed to maintain continuous connectivity when devices fail. It is built for high availability and redundancy, providing multiple paths so the network remains reachable even if some components fail.

• Why the others are not correct:

• Shadow IT describes employees using unsanctioned tools or methods to access systems, often without IT oversight (e.g., bypassing the VPN).
• Not A (Espionage): this implies external covert actors; here the activity is internal.
• Not B (Data exfiltration): there’s no explicit data transfer shown, just bypassing the VPN.
• Not C (Nation-state attack): this involves external political/strategic actors; not the internal behavior described.

• Implement policy and training to enforce approved tools.
• Use IAM, VPN enforcement, and network access controls to ensure only sanctioned access.
• Monitor for unsanctioned tools and provide secure, approved alternatives.

• Two instances: Free/Shared do not provide the production-level multi-instance hosting you need. Basic/Standard support more than one instance, with Standard specifically meeting the scale requirement.
• SSL support: SSL (custom domain TLS) isn’t available on the Free tier and isn’t a driver for cost on paid tiers—but you’ll need a paid tier to map a custom domain (miami.weyland.com) and use SSL.
• Storage: Your site needs 12 GB. Free/Shared have very limited storage; Basic tier storage is typically smaller than what you need, while Standard provides substantially more storage capacity.
• Cost: Among the tiers that meet all requirements (two instances, SSL, sufficient storage), Standard is the lowest-cost option that satisfies them.

• Domeny tworza restrykcjony razem z typem. Wykorzystujesz je w kolumnach, aby miec spójna walidacje danych w wielu miejscach.
• To nie jest pelny niestandardowy typ z wlasnym input/output funkcjonowaniem. Aby stworzyc typ z wlasnym I/O i operacjami, uzylbys CREATE TYPE (lub rozszerzen w C). Domeny to uproszczona forma ograniczen na istniejacy typ.

• CREATE DOMAIN positive_int AS integer NOT NULL CHECK (VALUE > 0);
• CREATE TABLE orders (id serial, qty positive_int);

• latwo wymuszaja wspólne reguly dla wielu kolumn/naglówków,
• zmiana regul w jednym miejscu (domena) automatycznie wplywa na wszystkie kolumny ja uzywajace.

• runParallel is defined as async, so it returns a Promise.
• To use the result, you attach a then handler (or use await inside another async function).

• A: “Async runParallel() .then(data);” is invalid. “async” is a keyword for function declarations, not something you put in front of a call, and you’d need a function as the then-argument.
• B: “runParallel().done(function(data){return data;});” .done is not standard in native Promises (it exists in some libraries). Without a compatible library, this won’t work.
• C: “runParallel().then(data);” is invalid because then expects a function as its argument; data is not a function.
• D: “runParallel().then(function(data){ return data; });” is valid (or equivalently, runParallel().then(data => data);).

• The robust, standard option is D.
• B could work only with a library that provides .done; otherwise it’s not reliable.

• wyjasnic istniejace pytania z tej strony,
• wskazac, dlaczego dana odpowiedz jest poprawna lub bledna (z uwzglednieniem celów egzaminu),
• omówic koncepcje zwiazane z Google Cloud AI.

• Sustainability is not a CAF perspective (it's not one of the CAF perspectives).
• Performance efficiency and Reliability are pillars of the AWS Well-Architected Framework, not CAF.

• '15' is a string. With + and a string, JavaScript does string concatenation: '15' + 10 -> '1510'.
• The result '1510' is then used in a multiplication: '1510' 2. The operator triggers numeric conversion, so '1510' becomes the number 1510.
• 1510 * 2 = 3020.

• If the code were let x = (15 + 10) * 2, the result would be 50 since 15 + 10 is numeric addition.

• In Microsoft Teams Phone System, a single Auto Attendant can handle multiple time-based greetings by using separate schedules for office hours, after hours, weekends, and holidays.
• You can configure one Auto Attendant with four distinct greetings mapped to:

• Open the Teams admin center > Voice > Auto attendants, edit or create an Auto Attendant.
• Under Time-based routing, define four rules:

• Create a Holiday schedule with the relevant dates (e.g., Easter, Christmas) and assign the Holiday greeting.
• Save the configuration.

• If your environment cannot separate weekend from after-hours within a single Auto Attendant, you might technically need more than one Auto Attendant.

• Developed and maintained independently
• Deployed without changing the entire application
• Scaled separately based on demand
• More resilient when another service has problems

• A: Functional testing is useful, but it is not the main practice described.
• B: Automation helps deployment, but the scenario focuses on architectural decomposition.
• C: Multiple locations improve availability, not application modularity.

• Goal: Guests should not use cameras, but company users can.
• Correct configuration: Guest access settings in the Org-wide settings.

• External access: Controls external-domain communication, not guest capabilities inside Teams.
• Teams settings in Org-wide settings: Too generic; doesn’t specifically target guest capabilities.
• Audio & Video in the default Meeting Policy: Would affect everyone assigned to that policy. To meet the requirement without impacting internal users, you’d need separate policies or guest-specific settings; the exam focuses on the guest-access policy.

• Correct answer: A) Hashing

• Why: Hashing produces a fixed-size digest of the software. If the final build is altered in any way, the hash will change, enabling you to detect tampering by comparing the stored digest with a freshly computed one.

• Why not the others:

• Pull: Downloads changes from the central repository and updates the local repository.
• Push: Sends local commits to the central repository.
• Commit: Records local changes in the repository’s history.
• Merge: Combines changes from different branches.
• Clone: Creates a new local copy of a repository.

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• Ensure that only users who manage the production environment sign in to the Azure portal from a hybrid Entra-joined device and authenticate with MFA.

• Use Microsoft Entra ID Protection (Identity Protection) to enforce MFA enrollment:

• Update the existing Capolicy1 (a Conditional Access policy):

• Identity Protection MFA registration policy ensures users are enrolled in MFA (Box 1 choice).
• CA policy Capolicy1 with aGrant control of “Require MFA” enforces MFA during sign-in (Box 2 choice).
• Both work together with the hybrid-joined device requirement to satisfy the authentication/authorization rules.

• Apply the MFA registration policy to the production-management users.
• Apply the MFA grant to Capolicy1 for those same users/groups.

• Premium file shares: contoso104 only
• Blob access tiers: contoso101, contoso102, and contoso103

• Premium Azure Files shares require a storage account with the FileStorage account kind. This is a specialized account type and is not used for blob storage.
• Blob access tiers such as Hot, Cool, and—where supported—Archive apply to blob-capable accounts, such as General-purpose v2 or BlobStorage accounts shown in the exhibit.
• contoso104 is therefore excluded from the blob-tier selection because it is the premium Files account.

• Reusing features across different models and teams
• Consistent feature definitions
• Managing feature versions and metadata
• Using features for both training and inference

• SageMaker Data Wrangler: Prepares and transforms data; it is not primarily a shared feature repository.
• SageMaker Clarify: Helps detect bias and explain model predictions.
• SageMaker Model Cards: Documents models, including intended use, risks, and evaluation results.

• Answer:

• Why:

• Why the other centers aren’t the right fit here:

• The correct answer: C. Tokenization

• Why:

• Why the others are weaker:

• The correct permission is Manage Sandboxes (the official Salesforce name; the option in the list is written as “Manage Sandbox,” which is effectively the same idea but the canonical name uses the plural).
• Why: Sandboxes are a lifecycle feature. Only users with the explicit Manage Sandboxes permission can perform create, delete, refresh, or activate actions.
• Why the other options aren’t correct:

• Correct answer: C: Amazon Comprehend.

• Why: The library wants to classify books based on their text content. This is an NLP (natural language processing) task. Amazon Comprehend is AWS’s managed NLP service that can perform content classification (including creating custom classifiers) and extract meaningful information from text. The other services are not focused on text classification:

• Quick note: In practice, you’d store the books in S3, extract text if needed (e.g., from PDFs with Textract), and then use Comprehend to classify the documents into topics or genres.

• Basic: billing/subscription support only; no technical support requests can be opened.
• Developer, Standard, Professional Direct, and Premier: include technical support and allow opening new support requests.

• If option A corresponds to “Developer, Standard, Professional Direct, Premier,” that is the correct choice.
• If the option text is really “Premier only,” that would be incorrect per current Azure docs.

• Correct answer: B) “16 MB document and 100 MB RAM”
• Why:

• They propose a 2 MB document limit, which is not the current document size limit.
• Some options ignore the 16 MB document limit or the RAM limit.