GAQM CASPO-001 Exam Prep
Certified Agile Scrum Product Owner (Page 2 )

• CAPWAP (Control And Provisioning of Wireless Access Points) creates a tunnel between the AP and the Wireless LAN Controller over the IP network. The AP and WLC communicate via this CAPWAP tunnel, which can traverse Layer 2 or Layer 3 networks.
• The AP does not have to be on the same switch as the WLC. It can connect to any switch in the network, as long as there is IP reachability between the AP and the WLC. This is why option D is correct.
• The other options are incorrect:

• RPO (Recovery Point Objective) — maximum acceptable data loss, measured in time. It specifies how far back in time you can tolerate data loss. Example: RPO of 2 hours means backups must occur at least every 2 hours.

• ARO (Annualized Rate of Occurrence) — expected frequency of a threat occurring per year. It estimates how often a risk is likely to happen on average (used in risk calculations).

• MTTR (Mean Time To Recover) — average time to recover/restore service after an incident. It includes detection, repair, and restoration time, and helps gauge downtime and alignment with RTO.

• Premium file shares: contoso104 only
• Blob access tiers: contoso101, contoso102, and contoso103

• Premium Azure Files shares require a storage account with the FileStorage account kind. This is a specialized account type and is not used for blob storage.
• Blob access tiers such as Hot, Cool, and—where supported—Archive apply to blob-capable accounts, such as General-purpose v2 or BlobStorage accounts shown in the exhibit.
• contoso104 is therefore excluded from the blob-tier selection because it is the premium Files account.

• A) MTU mismatch: OSPF neighbors must exchange Hello packets with a compatible MTU. If MTUs differ, the neighbor conversation fails and the adjacency cannot become Full.

• B) Incorrect subnet mask: Routers must be in the same IP subnet on the connected link to form a neighbor relationship. A subnet mismatch prevents Hello packets from being considered valid on the same network.

• D) Area ID not the same: Neighbors must share the same Area ID. A mismatch stops adjacency from forming beyond the 2-Way state.

• E) Different metric set on each end of the link: Cost differences do not prevent OSPF adjacency; they affect routing decisions, not neighbor formation.
• F) Router ID not defined: OSPF can auto-choose a router ID; an undefined ID is not a prerequisite for adjacency to reach Full.

• A separate scope using a /32 subnet: A /32 identifies one host, but it is not a practical DHCP scope for this purpose.
• A static IP within the DHCP range: This can cause an IP address conflict if DHCP assigns that address to another device.
• SLAAC: Used for automatic IPv6 address configuration, not for assigning a predictable IPv4 address through DHCP.

• Failed login attempts
• The account being targeted
• The source user or system
• Time and frequency of attempts

• Two-factor authentication: Helps prevent unauthorized access, but does not primarily detect the employee’s attempts.
• Firewall: Controls network traffic; it generally does not monitor individual login attempts.
• Intrusion prevention system (IPS): Can detect certain network attacks, but this scenario is best addressed through authentication and audit logging.

• S3 Versioning stores all versions of an object. If an object is overwritten or deleted, you can recover the previous version using its version ID.
• This protects against accidental deletion or overwriting because the original data remains accessible as an older version.
• How to enable:

• Practical notes:

• S3 Lifecycle rules: automate moving/expiring data, not specifically protection against deletion.
• S3 bucket policies: control access but don’t inherently preserve previous data.
• S3 server-side encryption: protects data at rest, not against deletion/overwrite.

• Leadership and stakeholder commitment
• Business capability and skills
• Organizational culture
• Availability of resources
• Ability to manage and sustain change
• Impact of the proposed transformation

• How ready the organization is
• Which areas require urgent attention
• How difficult each issue may be to resolve
• Risks that could affect implementation

• A: Places the assessment in Phase B and refers vaguely to creating views; this is not the prescribed technique.
• B: An Implementation Factor Assessment and Deduction Matrix is not the primary TOGAF technique described for business transformation readiness.
• D: A Business Scenario helps identify requirements and stakeholder concerns, but it is not the main technique for assessing organizational readiness.

• The target API uses HTTPS, so Mule must validate the server’s TLS certificate.
• The TLS configuration is set to None, meaning no custom truststore is configured.
• Mule therefore uses the JRE’s default truststore to determine whether the target certificate is trusted.
• If the issuing CA certificate is in that truststore, the TLS handshake can succeed.
• If it is absent—or the certificate is otherwise invalid—the request fails with a TLS/handshake error.

• L2TP uses UDP port 1701 for the L2TP control channel.
• The destination port is 1701; the source port is a dynamically chosen ephemeral port on the client (not 1701).
• Therefore the statement that both source and destination ports are 1710 is incorrect (and 1710 is not the standard L2TP port).

• The destination port should be 1701, not 1710.
• The source port should be an ephemeral port chosen by the client, not 1701.

• The stage has a default file format defined (e.g., when you create the stage with FILE_FORMAT = (...)), and Snowflake will use that default.

• You use a named file format attached to the stage, or you specify an inline format in the COPY command, e.g., COPY INTO my_table FROM @my_stage FILE_FORMAT = (TYPE = 'CSV');

• Use a stage default: omit FILE_FORMAT in COPY.
• Or rely on a named/inline format: specify FILE_FORMAT in COPY or set a format on the stage.

• Answer: A

• Reason: The Standard web tier is the lowest tier that provides dedicated compute, built-in load balancing across instances, and sufficient storage to host multiple apps with custom domains. Basic may lack the required scalability/storage, while Free/Shared do not offer dedicated compute or proper load balancing.

• Product Owner: May attend, but is not required unless also working as a Developer.
• Scrum Master: May attend to help facilitate or coach, but is not required.
• Developers: Must participate because the event is specifically for them.

• Approval publish: Request approval from a manager of the knowledge base before moving the article into the publish state.
• Instant Publish: Immediately publishes a draft article without requiring an approval.
• Instant Retire: Immediately retires a published article without requiring an approval.
• Retire Knowledge: Moves a knowledge article to the retired state.

• These are the base knowledge workflows that control how articles move between states (Draft, Published, Retired) and whether approvals are required.
• The other options describe different lifecycle actions, but these four cover the standard publish/retire workflows in ServiceNow.

• Create and manage catalogs of approved IT services
• Govern and publish infrastructure-as-code (IaC) templates, commonly AWS CloudFormation templates
• Control which users can deploy specific products and configurations
• Apply versioning, permissions, and deployment constraints

• AWS Resource Explorer: Searches and discovers AWS resources; it does not govern IaC templates.
• AWS Organizations: Manages multiple AWS accounts, policies, and consolidated billing.
• AWS Systems Manager: Helps operate and manage deployed resources, such as patching and automation, but is not primarily a catalog for governed IaC products.

• User1 can sign in because the account is cloud-only. It does not depend on the on-premises domain.
• User3 can sign in because the account uses Password Hash Synchronization (PHS). Azure AD has a synchronized password hash and can validate the sign-in even when connectivity to on-premises Active Directory is unavailable.
• User2 cannot sign in because the account relies on Pass-through Authentication (PTA). PTA sends the authentication request to an on-premises PTA agent, which must contact a domain controller. With the internet connection from on-premises lost, that validation cannot occur.

• Correct choices: A and D.

• Why not B, C, or E?

• Automation handles repetitive tasks, and orchestration coordinates responses across tools (SIEM, SOAR, EDR, etc.).
• This allows the security team to process more events with the same number of people, improving throughput and response times.
• Analysts can focus on more complex tasks like investigation and threat hunting instead of manual triage.

• It increases complexity: automation can reduce complexity when well-implemented; complexity is not the main intended benefit.
• It removes technical debt: automation/OR focuses on current incident response efficiency, not primarily on architectural debt.
• It adds additional guard rails: governance is important but not the core value of automation/orchestration within a SIEM.

1. Define Power Platform DLP policies
2. Add custom prompt modifications
3. Conduct adversarial testing

1. DLP policies first

1. Prompt modifications second

1. Adversarial testing last

• Correct answer: D — AWS Migration Hub

• AWS Migration Hub provides a single location to track the progress of application migrations. It offers a centralized dashboard to view migration status across multiple tools and projects.

• AWS Application Discovery Service helps inventory and map on-prem applications and their dependencies, not a single progress tracker.
• AWS Application Migration Service (formerly SMS) performs the actual lift-and-shift migrations, but isn’t the centralized tracker itself.
• AWS Service Catalog manages catalogs of IT services for self-service deployment, not migration progress.

• Primary and core nodes: Use On-Demand Instances because the workload is business-critical. These nodes manage the cluster and store/process HDFS data.
• Task nodes: Use Spot Instances in an instance fleet. Task nodes are suitable for interruption because they do not hold essential cluster data and can be replaced or diversified across instance types.
• Terminate the entire cluster after processing: The job runs only about six hours each morning, and EMRFS stores data in Amazon S3. Keeping the cluster running for the rest of the day would waste money.

• A: Using Spot for primary and core nodes risks interruption of the critical cluster.
• C: All On-Demand is reliable but unnecessarily expensive; terminating the cluster helps, but Spot task nodes provide greater savings.
• D: Leaving primary and core nodes running after the task finishes continues to incur costs. Savings Plans also are less appropriate for this intermittent workload.

• Correct answer: D (Special category data)

• Why:

• Quick notes:

• A — conformant: Incorrect because one explicit requirement is violated.
• B — consistent: “Consistent” is not sufficient where the implementation contradicts a mandatory specification. The RPC mechanism is covered by the architecture, and the implementation differs from it.
• C — consistent: Incorrect reasoning: the RPC mechanism does have a defined architectural requirement, so conformance must be assessed.
• D — non-conformant: Correct because the implementation fails to follow the specified RPC/threading requirement.

• Answer: A. Use Amazon SageMaker Serverless Inference to deploy the model.

• Why: SageMaker Serverless Inference hosts the model and serves real-time predictions without you provisioning or managing servers. It scales automatically and handles deployment details.

• Why the others aren’t suitable:

• Quick example flow: web app ? SageMaker Serverless Inference endpoint ? model ? response.

• What the dataflow options mean:

• Why C fits best:

• The connecting host keeps the private key securely.
• The destination host stores the corresponding public key in its authorized keys.
• Authentication can occur without a person entering credentials each time.
• SSH also provides encrypted communication and host authentication.

• Biometric: Requires a human user and is difficult to automate.
• Smart card: Often requires user interaction or card access.
• Hard-coded password: Unsafe because passwords stored in scripts or applications can be exposed, reused, or difficult to manage securely.

• Post-Incident Review (A) is the after-action step used to capture lessons learned, identify process gaps, and drive improvements across the incident response lifecycle. This directly supports process maturity and a stronger security posture.
• Incident Analysis (D) focuses on investigating root causes during/after an incident, which is important but more of a diagnostic activity than a standalone baseline improvement to maturity.
• Fast Eradication (B) and Incident Containment (C) are tactical actions aimed at stopping the incident, not on maturing the process.

• Network Security Groups (NSGs) control network traffic to and from Azure resources.
• By applying NSGs to the web tier and the database tier (subnets or NICs), you can:

• NSGs provide the necessary granularity (source/destination, port, protocol) to enforce the desired traffic patterns between tiers.
• For easier management you can use separate subnets for each tier or, optionally, use Application Security Groups to simplify rule management.

• Step 1: From Power BI Desktop, select Get Data, choose Folder, enter the folder path, and click OK, then choose Transform data to open Power Query Editor.

• Step 2: In Power Query Editor, expand the Attributes column.

• Step 3: From the Power Query Editor, select the Content column and use Home > Combine Files (aka “Combine binaries”) to consolidate the files.

• A: True. You can change the size of a Virtual Warehouse after creation (via UI or ALTER WAREHOUSE).

• B: True. A warehouse can be resized while it’s running; the resize will take effect without needing to stop queries.

• C: True. A warehouse can be configured to suspend after a period of inactivity (AUTO_SUSPEND).

• D: True. A warehouse can be configured to auto-resume when new queries are submitted (AUTO_RESUME).

• B — Prompts and suggestions retained for 28 days
• C — User engagement data kept for two years

• The key distinction is between content data—your prompts, code context, and generated suggestions—and engagement data, such as usage activity.
• Do not confuse retention with training: enterprise Copilot data is generally not used to train GitHub’s models without appropriate authorization.
• For a current exam, verify the policy version cited by the exam provider. The key’s C is likely correct, but B should be treated cautiously and may no longer reflect the current policy.

Why

cmd 
PowerShell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

Why the other options are less suitable

• GPO logon script: Runs only when a user logs on and may not run during initial VM provisioning.
• GPO startup script: Can work, but requires the VM to be joined to the domain and the policy to be applied. It is also normally evaluated at each startup.
• Place scripts in a VHD: Merely placing scripts on a disk does not cause them to execute.

• C — Schema.describeSObjects(new String[]{myObject})[0].fields.getMap()

• D — Schema.getGlobalDescribe().get(myObject).getDescribe().fields.getMap()

• A: sObjectType is not used this way, and fieldSet() is not the appropriate method for retrieving all fields.
• B: mySObject.myObject is not valid dynamic Apex syntax.

• State is stored remotely in Terraform Cloud/Enterprise, not as a local file.
• Terraform runs (plan/apply) can be executed on remote infrastructure, with results visible in the remote workspace UI.
• Supports workspace-based organization, state locking, and concurrency control.
• Useful for team collaboration, centralized governance, and auditable logs.

• In your configuration, you use a backend block like backend "remote" { ... }.
• You still run terraform init to configure/migrate to the remote backend.
• After setup, terraform plan/terraform apply may be executed remotely, and the outputs/logs appear in the Terraform Cloud/Enterprise UI rather than (only) in your local terminal.

• Other backends store state remotely but typically do not provide remote execution; with the remote backend you get remote runs and a collaborative UI, not just remote state storage.

• Statement 1: Admin1 must approve requests for the Agent ID Developer role — No

• Statement 2: Admin2 can approve requests for the AI Administrator role — No

• Statement 3: Admin3 can assign User1 a two-day active assignment for the Agent ID Developer role — Yes

• Short answer: The correct term is Anti-forensics (option D), not “Felony.”

• Why: The actions described—hiding files in slack space, changing file headers, placing suspicious files in executables, and altering metadata—are classic anti-forensics techniques. They’re used to hinder or obscure forensic analysis, not to label the act as a legal category.

• About the options:

• Note: The provided answer key lists B (Felony), which is misleading for this exam objective. The exam typically tests knowledge of forensics concepts, where anti-forensics is the correct category.

• Server — provides services or resources
• Endpoint — a user device connected to the network
• Ethernet — a networking technology, not a filtering device
• Firewall — filters and controls traffic

• A — Add a Path for Stage: A Path lets users update the Opportunity’s Stage directly from the record page, without opening the full edit form. It can also display guidance and key fields.
• B — Use a Kanban list view: Users can move Opportunities between stages by dragging records between columns, which is ideal when Stage is the only field they normally change.

• Why: Crisis management relies on established, repeatable procedures for responding to an incident (activation of the crisis team, escalation paths, communications, containment actions). This ensures a coordinated, timely, and auditable response.

• Why not the others:

• It is a sequence of distinct phases that flow one after another (requirements ? design ? implementation ? verification ? maintenance).
• Requirements are defined up front and changes are costly; the project often requires formal sign-off before moving to the next phase.
• It emphasizes heavy documentation and minimal iteration after a phase is completed.

• Define the contractor’s deliverables, responsibilities, acceptance criteria, and deadlines.
• Agree on a reporting cadence to monitor progress.
• Allow the local company to use its expertise and manage its own work.

• A: “Under the supervision of the project manager” suggests excessive direct control and is less empowering.
• B: Micromanaging prevents the contractor from functioning independently and is inefficient.
• D: Deploying the contractor’s staff under the PM’s supervision creates a staffing/control arrangement rather than empowering the contracted company.

sql 
CREATE TABLE my_table 
USING CSV 
OPTIONS (path '/path/to/csv');

sql 
CREATE TABLE my_table 
USING CSV 
LOCATION '/path/to/csv';

• USING CSV specifies the file format.
• path or LOCATION specifies where the files are stored.
• USING DELTA would be used only when the source data is in Delta format.
• FROM is used in a SELECT statement, not normally as the format declaration in CREATE TABLE.

• '15' is a string. With + and a string, JavaScript does string concatenation: '15' + 10 -> '1510'.
• The result '1510' is then used in a multiplication: '1510' 2. The operator triggers numeric conversion, so '1510' becomes the number 1510.
• 1510 * 2 = 3020.

• If the code were let x = (15 + 10) * 2, the result would be 50 since 15 + 10 is numeric addition.

• The correct answer is Mass Transfer Tool.

• The Mass Transfer Records tool is Salesforce’s built-in way to reassign ownership of existing records in bulk. In this scenario, you need to transfer ownership of the departed rep’s accounts and opportunities to a new rep while keeping the team structure intact.

• Go to Setup > Data Management > Mass Transfer Records.
• Choose the object: Accounts (and then Opportunities, if needed).
• Set “Transfer From” (the leaving rep) and “Transfer To” (the new rep).
• Decide whether to transfer related records as well (e.g., opportunities tied to accounts) and proceed.
• Review and confirm.

• Data Loader / Data Import Wizard are for bulk import/export, not bulk reassigning ownership.
• Dataloader.io is a third-party tool; the built-in Mass Transfer tool is the standard Salesforce method for this task.

• Co to znaczy: transakcje zachowuja sie tak, jakby byly wykonywane jeden po drugim. Dzieki temu nie ma brudnych odczytów, niepowtarzalnych odczytów ani phantom reads.

• Implementacja: PostgreSQL uzywa SSI (Serializable Snapshot Isolation). W praktyce oznacza to, ze jesli wykryje konflikt miedzy transakcjami, jedna z nich zostanie zakonczona bledem “serialization failure” i trzeba ja ponowic.

• Zalózmy tabele orders(customer_id int, amount int).

• Transakcja T1:

• Transakcja T2, równoczesnie:

• T1 ponownie wykonuje to zapytanie:

• Phishing can map to two MITRE ATT&CK tactics depending on the attacker’s objective.

• Therefore, phishing isn’t confined to a single tactic; it can serve both Reconnaissance and Initial Access, which is why option D (Reconnaissance, Initial Access) is correct.

• View/inspect configuration: Possible.
• Modify the installed application or its S-Controls: Typically restricted in a test-drive org.

• cloud applications only
• all Web traffic including cloud applications

• Cloud applications only: Only traffic to cloud apps is steered to Netskope for inspection/enforcement; other traffic bypasses.
• All Web traffic including cloud applications: All web-bound traffic, including cloud app traffic, is steered to Netskope.

• Browser isolation, Web traffic only, or a vague “traffic only” option are not the standard two steering modes.
• These two configurations let you decide what traffic Netskope analyzes in real time and what is bypassed.

• The “Answer(s)” field lists B and C (likely incorrect). The explanatory text correctly describes cloud applications only and all Web traffic including cloud applications as the two configurations.

• Assign users or their team an appropriate security role.
• Ensure the role has the required table privileges, such as read, create, write, and append.
• Share the app with that security role in the app designer.

• Dynamics administration center: Used for environment and service administration, not routine app access configuration.
• Manage Roles: Not the specific Dataverse area used to define app and data permissions.
• Security Roles: Define what users can access and which operations they can perform.