GAQM CFA-001 Exam Prep
Certified Forensic Analyst (Page 19 )

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

1. Which host originated the infection

1. Which remaining hosts are infected

sql 
ALTER TABLE dbo.DimCustomer 
ADD CONSTRAINT PK_DimCustomer 
PRIMARY KEY NONCLUSTERED (CustomerKey) 
NOT ENFORCED;

1. ALTER TABLE dbo.DimCustomer
2. ADD CONSTRAINT PK_DimCustomer PRIMARY KEY NONCLUSTERED (CustomerKey)
3. NOT ENFORCED

• DB1 (500 TB): Azure Data Box Heavy

• Virtual machines: Azure Migrate

• B: Developer Edition has limited user, storage, and data-volume capacity, making realistic community testing difficult.
• C: A Developer Edition org cannot contain sandboxes, so it cannot provide separate environments for development, integration, and UAT.
• E: A standalone Developer Edition org is not part of the production org’s deployment path, so change sets cannot be used to deploy from it directly to that production org. The team would need Metadata API, Salesforce CLI, or another deployment method.

• Espionage: Stealing confidential information, often for a competitor or government.
• Data exfiltration: Unauthorized transfer of data outside the organization. This could occur, but the question focuses on using unapproved access methods.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Employees using technology or access methods outside the organization’s approved security controls.

1. Identify the fact table

• Records something that happened, such as a sale, test, appointment, or measurement
• Contains foreign keys to other tables
• Contains measures or numeric results
• Has many rows

2. Identify a dimension table

• Describe people, products, dates, locations, or departments
• Contain descriptive columns
• Are referenced by the fact table
• Have fewer rows than the fact table

3. Identify the surrogate key

• System-generated
• Unique within the dimension
• Often named PatientKey, CustomerKey, or similar
• Usually an integer
• Not meaningful outside the model

• Check whether the data is accurate, complete, and properly prepared.
• Confirm that the pattern is not caused by an outlier, data-quality problem, or modeling issue.
• If the data is valid, treat the result as a potentially valuable new business insight.

• A: A data scientist may help, but expert validation and data-quality checking come first.
• C: Filtering out inconvenient data risks hiding a valid insight.
• D: Einstein’s result should not be accepted without verification simply because it produced the finding.

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer attacks

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and transport protocols; it cannot deeply inspect web application content.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specifically designed to protect web applications.
• UTM: Combines several security functions in one appliance, but it is not the most targeted solution for a web portal.

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• A — Increasing the minimum password length to 14 characters: Longer passwords have more possible combinations, making them harder to guess or crack through brute force.
• F — Requiring at least one special character: This increases password complexity and expands the possible character combinations.

• MD5 to SHA-512: Improves password-hash resistance, but does not stop users from choosing easy-to-guess passwords. Also, modern systems should use a password-specific hashing algorithm such as bcrypt, scrypt, or Argon2.
• Increasing maximum age to 120 days: Leaves weak passwords in use longer.
• Reducing minimum length to 10: Makes guessing easier.
• Reducing minimum age to zero: Allows immediate password changes but does not make the password itself harder to guess.

• A laptop
• Software access
• A password reset
• A mobile phone

• They run behind the scenes — applies more to automation or workflows.
• They are optional — catalog items are fundamental to a request-based catalog.
• They provide options — variables and variable options collect the requester’s choices for an item; they are not the catalog item itself.

• Identified risks
• Risk owners or responsible parties
• Likelihood and impact
• Risk response plans
• Current status
• Risk thresholds or trigger conditions

• Risk tolerance: The amount and type of risk an organization is willing to accept; it is not primarily a tracking document.
• Risk transfer: Moving the financial or operational impact of a risk to another party, such as through insurance or outsourcing.
• Risk analysis: The process of evaluating a risk’s likelihood and impact.

• Existing expected ROI: 15%
• New project ROI: 14%
• Cost of capital: 12%

• Project return = 14%
• Cost of capital = 12%
• It earns 2% more than the cost of capital, so it should increase shareholder value.

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or financial impact to another party, such as through insurance or a contract.
• Mitigate: Reduce the likelihood or impact using controls, such as firewalls, training, or backups.
• Avoid: Eliminate the activity that creates the risk.

• Create and manage approved IT services as products
• Control which users can deploy those products
• Apply governance, permissions, and constraints
• Use and manage infrastructure-as-code templates, such as AWS CloudFormation templates

• AWS Resource Explorer: Helps find and browse AWS resources; it does not govern IaC deployments.
• AWS Organizations: Manages accounts, consolidated billing, and organization-wide policies.
• AWS Systems Manager: Provides operational management, such as patching, automation, and parameter storage, but it is not primarily used to catalog and govern IaC-based service deployments.

• User preferences change, so the model must learn from recent data.
• Keeping the existing data helps preserve knowledge of older patterns and provides a broader training distribution.
• Training only on new data can cause catastrophic forgetting and may overfit if the new dataset is small.
• The new data should not automatically be used as the test set, because it is needed for training and the model must still be evaluated on separate, representative data.

• A valid input returns the expected result
• An invalid input raises an error
• Boundary values are handled correctly

• B: Copilot may help generate tests, but it does not automatically write all necessary tests.
• C: Writing the implementation does not verify that it works correctly.
• D: Copilot can suggest test commands or test code, but the developer or development environment must execute and validate the tests.

• Users logging in more frequently than average
• Logins occurring during non-business hours
• Patterns that may indicate compromised credentials or suspicious access

• Login History: Shows individual login attempts and basic details, but does not provide behavioral analysis or averages.
• Login Inspector: Used to troubleshoot or inspect a specific login attempt, rather than analyze organization-wide patterns.
• Login Report: May provide reportable login information, but it is not the specialized tool for forensic behavioral analysis.

• Accept: Acknowledging the risk without taking additional action.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity or condition that creates the risk.
• Transfer: Shifting the consequences—usually financial—to another party, such as an insurer.

• Red team: Simulates attackers; exploits weaknesses to test security.
• Blue team: Defends systems; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team efforts to improve detection and defense.
• White team: Oversees or manages the test, defining rules, scope, and authorization.

• B — Single customer login across properties: Customer 360 Identity provides centralized identity services, allowing an organization to recognize a customer across multiple digital properties and applications. This helps UC understand authenticated activity as part of a broader customer identity.

• C — Multi-brand support: Customer 360 Identity can support multiple brands and user experiences. Identity services can remain centralized while correlating a customer’s activity across different corporate brands or channels.

• A: Customer 360 Identity does not automatically populate all data into Customer 360 Data Manager and Customer 360 Audiences. Integration and data configuration are still required.
• D: Tracking anonymous activity and linking it after sign-up may be possible through broader customer-data and tracking implementations, but it is not the primary Customer 360 Identity benefit tested here. Identity focuses mainly on authentication, registration, and cross-property identity correlation.

• Each Azure VM must have at least one network interface (NIC).
• A single NIC can have:

• Therefore, each of the five VMs needs only one NIC:

• SharePoint search: Finds documents based on search terms, but it does not reliably identify every 32-character account number for DLP enforcement.
• A hunting query in Microsoft 365 Defender: Used for security investigations, not for defining sensitive content in a DLP policy.
• Azure Information Protection: Uses classification and labeling; it does not automatically identify this specific account-number pattern unless configured with a matching sensitive information type.
• RegEx pattern matching: Best suited for structured identifiers with a known format, such as account numbers, employee IDs, or policy numbers.

• Suspended an operator who refused to use unsafe equipment.
• Paid another operator a bonus for using it.
• Prioritised short-term productivity over employee safety.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — The factory’s safety record is likely to be poor.

• Wireshark captures packets and allows you to examine their contents, potentially revealing usernames and passwords sent without encryption.
• Netcat creates network connections and can send or receive data, but it is not primarily a packet-analysis tool.
• Nessus scans for known vulnerabilities and configuration issues; it generally would not prove that credentials are visible in transit.
• Nmap performs network discovery and port/service scanning, not detailed packet-content inspection.

• Maintain head office control: Transfer pricing generally supports decentralisation rather than direct head-office control.
• Establish centralised decision making: This conflicts with divisional autonomy.
• Develop a top-down culture: Transfer pricing is intended to support empowered divisions and goal congruence, not impose purely top-down management.

• Create a CodeCommit repository in the secondary Region.
• Use CodeBuild to run a Git mirror operation from the primary repository to the secondary repository.
• Use EventBridge to detect relevant repository events, such as a pull request being merged.
• Invoke a Lambda function, which starts the CodeBuild project.

• B: Amazon S3 is object storage, not a Git repository that developers can use as a CodeCommit remote.
• C: CodeArtifact is intended for packages and artifacts, not source-code repository mirroring.
• D: An AWS Cloud9 environment is not an appropriate automated replication mechanism and would require manual or persistent infrastructure management.

• Data loss prevention (DLP): Helps detect or prevent sensitive data from being copied or transmitted, but it does not primarily protect a stolen laptop’s stored data.
• Operating system hardening: Reduces vulnerabilities and attack surface but does not encrypt files if the device is stolen.
• Boot security: Helps ensure that only trusted software starts, but it does not fully protect the drive if an attacker accesses it offline.

• If the Facebook user is new, Salesforce invokes createUser.
• If the user already exists, Salesforce can invoke updateUser.
• The handler can read the latest data from Facebook, such as name, email, or other profile attributes, and update the corresponding Salesforce user.

• B: A scheduled job is unnecessary and would not provide real-time synchronization during authentication.
• C: A Facebook signed request is not the standard mechanism for updating Salesforce user records in this authentication-provider setup.
• D: SAML Just-in-Time provisioning applies to SAML identity providers, not Facebook OAuth authentication.

• Reviewing security policies and standards checks whether controls are documented, not whether they work.
• Reviewing security logs may show that monitoring is occurring, but does not directly establish that preventive controls are effective.
• Analyzing technical security practices is broad and may assess implementation, but it is less objective than an actual controlled attack.

• Design/compliance effectiveness: policies, standards, and procedures
• Operational effectiveness: logs, records, and evidence that controls operate
• Technical security effectiveness: penetration testing or vulnerability testing

• D — Create sibling resource pools for the Production VMs and Test VMs.

• B — Configure a memory reservation on the Production resource pool.

• Shares only determine relative priority when resources are scarce; they do not guarantee memory.
• A parent resource pool alone does not provide a guarantee.
• A child pool for Test VMs does not reserve memory for Production.

• Import: Copies data into the Power BI model. It requires scheduled or manual refresh, so it may not meet the two-minute requirement.
• Live connection: Connects to an existing Power BI semantic model or Analysis Services model; it is not the appropriate choice for connecting directly to the Azure SQL database in this scenario.

CIMA P3 topics

• IT governance and systems strategy
• Systems development and implementation
• Change and project governance
• Strategic and business risk

• A — Plan for new systems: The committee should help identify and prioritise systems requirements and ensure planned systems support organisational needs.
• D — Consider competitive issues: New information systems may affect Y’s competitive position, service quality and efficiency. These strategic implications should be considered.
• E — Ensure the system meets company goals: This is a key governance responsibility. The committee should ensure the project remains aligned with Y’s objectives and delivers business value.

• B — Develop new systems: Detailed system development should be performed by IT specialists and project teams, not the steering committee.
• C — Manage the project: The project manager should handle day-to-day project management. The steering committee should provide oversight, challenge and key decisions, rather than manage daily activities.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best control for scanning uploaded documents for malware.
• C. Load balancer: Distributes traffic among servers and improves availability, but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may help secure the upload function, but malware scanning is the key requirement here.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• Data Category Groups e categorias;
• Visibilidade dessas categorias para perfis ou permission sets.

• B e C: regras de compartilhamento não são o mecanismo apropriado para restringir resultados de busca do Knowledge por divisão.
• D: a role hierarchy não é o mecanismo principal para controlar a visibilidade de categorias do Knowledge. Além disso, a configuração correta é atribuir visibilidade a perfis ou permission sets.

• Matching hashes: The software is unchanged.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality.
• Baselines: Define approved configurations or normal performance.
• Tokenization: Replaces sensitive data with tokens.

• Honeypots: Decoy systems or services made to attract attackers. Legitimate users should not interact with them, so activity there is a strong indicator of malicious behavior.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system. This can reveal infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens.
• CI/CD: Automates software development, testing, and deployment.
• Threat modeling: Identifies and analyzes potential threats before or during system design.
• Data obfuscation: Makes data harder to understand or interpret.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or methods used to access organizational resources.

yaml 
clusterIP: None

• CronJob: Runs Jobs on a schedule and normally does not need stable networking.
• Deployment: Manages interchangeable, stateless replicas and usually uses a regular Service.
• DaemonSet: Runs a Pod on selected nodes but does not inherently require stable Pod identities.

• C — “when the query finishes”

• D — “when the query began”

• An Adj-SID does not necessarily need manual configuration.
• It can often be dynamically allocated by the router, although manual configuration may also be possible.
• The adjacency information is advertised through the IGP, such as IS-IS or OSPF.

• It is identified by an Adj-SID.
• It represents a particular adjacency of a node.
• Its meaning is generally local to the advertising node; unlike a Node-SID, it is not a globally reusable instruction across the network.

• The message came from the claimed sender (authentication)
• The message was not altered in transit (integrity)
• The sender cannot easily deny having signed and sent it (non-repudiation)

• Compliance standards: May be a reason in some organizations, but it is not the primary security benefit.
• Increase delivery rates: Digital signatures do not generally improve email delivery.
• Block phishing attacks: Signatures can help recipients verify legitimate messages, but they do not block phishing by themselves.

• 16 VMs: one failure loses 25 GB and 10 cores—only 6.25% of memory.
• 8 VMs: one failure loses 12.5% of memory.
• 4 VMs: one failure loses 25%.
• 1 VM: one failure loses the entire application environment.

• Virus signatures: Primarily associated with antivirus or antimalware tools.
• Security agent deployment: Usually handled by endpoint-management or endpoint-security platforms.
• Vulnerability scanning: Performed by vulnerability-assessment tools, although a SIEM may ingest their results.

• The application failing to start or becoming unhealthy
• An incorrect probe path, port, or protocol
• The application needing more startup time
• Dependency or configuration failures
• A liveness probe being too aggressive

bash 
kubectl describe pod <pod-name> 
kubectl logs <pod-name> --previous

• Scale to more replicas: may hide the issue but does not diagnose it.
• Decrease initialDelaySeconds: makes probes run earlier and could worsen startup failures.
• Drain and reboot the node: node metrics are normal, so rebooting is not justified as the first step.

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.