Google Google Adword Advertising Fundamentals Exam Prep
Google AdWords Fundamentals (Page 12 )

• Drops packets when traffic exceeds a certain bitrate: This describes traffic policing, not shaping.
• Fragments large packets and queues them: Shaping does not fragment packets as its primary congestion-control action.
• Drops packets randomly from lower-priority queues: Packet dropping may occur if a shaping queue becomes full, but it is not the defining behavior.

• Shaping: buffers and delays excess traffic.
• Policing: drops or marks traffic that exceeds the configured rate.

• Store privileged credentials securely
• Grant the consultant only the access needed
• Provide temporary or time-limited access
• Rotate passwords automatically
• Record or monitor administrator sessions

• TACACS+: Centralizes authentication and authorization, commonly for network devices, but does not primarily provide password vaulting and privileged-session control.
• SAML: Enables web-based federation and single sign-on, not privileged credential management.
• SSO platform: Reduces the number of passwords users need, but does not necessarily protect administrative credentials or control privileged sessions.
• Role-based access control (RBAC): Assigns permissions based on job roles, but does not by itself prevent password sharing or securely broker administrator access.

• Reviewing and validating generated code
• Checking security, licensing, and quality concerns
• Testing the implementation
• Making the final design and coding decisions

• A: Copilot is not a complete replacement for developers.
• C: Human input, review, and oversight are still required.
• D: Copilot Chat supports many tasks beyond debugging, including explanation, generation, refactoring, and testing assistance.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• An active relationship is used automatically when filters are evaluated. An inactive relationship does not propagate filters unless explicitly activated in DAX, so it would not reliably enforce the required security behavior.
• Apply security filter in both directions allows RLS filters to propagate across the relationship in both directions. This ensures that bidirectional filtering respects the RLS rules applied to both tables.
• Assume referential integrity is unrelated to RLS. It is mainly a DirectQuery optimization that allows Power BI to use an inner join when matching keys are guaranteed to exist.
• The relationship must therefore be active, with security filtering enabled in both directions.

1. Get Data > Folder

1. Expand the Attributes column

1. Remove the Content column

• Folder connector: lists files and their metadata, but also includes a Content binary column.
• Combine Files: processes and combines the actual CSV contents, which is explicitly disallowed here.

• Data loss prevention (DLP): Helps detect or prevent sensitive data from being copied or transmitted, but it does not primarily protect a stolen laptop’s stored data.
• Operating system hardening: Reduces vulnerabilities and attack surface but does not encrypt files if the device is stolen.
• Boot security: Helps ensure that only trusted software starts, but it does not fully protect the drive if an attacker accesses it offline.

• Continuous deployment: Automates software releases; it does not specifically test input handling.
• Static code analysis: Examines source or compiled code without executing it. It can find coding flaws but does not directly stress the application with malformed inputs.
• Manual peer review: Developers inspect code or design manually. Useful, but not the best practice specifically for testing how a live product handles invalid input.

• Laws and regulations
• Litigation holds
• Industry or contractual obligations
• Tax, financial, health, or privacy requirements

• Business strategy and direction: May influence retention, but cannot override legal requirements.
• Storage capacity and longevity: Practical considerations, not the primary driver.
• Business ease and value analysis: May support decisions after compliance obligations are identified.

• A password cracker would normally be identified by behavior such as loading password hashes or attempting dictionary/brute-force attacks.
• The question describes a routine audit, not password recovery.
• Simply encountering a protected file during an audit is characteristic of a misconfigured or insufficiently privileged FIM.

• Personally identifiable information (PII) detection

• Prompt Shields

• Self-harm content filtering addresses self-harm-related content.
• Violence content filtering addresses violent content.
• Neither protects customer PII or detects document-based prompt injection.

1. Identify the fact table

• Records something that happened, such as a sale, test, appointment, or measurement
• Contains foreign keys to other tables
• Contains measures or numeric results
• Has many rows

2. Identify a dimension table

• Describe people, products, dates, locations, or departments
• Contain descriptive columns
• Are referenced by the fact table
• Have fewer rows than the fact table

3. Identify the surrogate key

• System-generated
• Unique within the dimension
• Often named PatientKey, CustomerKey, or similar
• Usually an integer
• Not meaningful outside the model

• BCP: Maintains essential business operations during and after disruption. It is broader than IT recovery, but the question focuses on restoring the destroyed data center.
• Communication plan: Defines how the organization communicates with staff, the public, and other stakeholders.
• IRP: Handles security incidents such as malware, unauthorized access, or data breaches—not physical disaster recovery.

• SQL injection (SQLi): Attacks databases by inserting malicious SQL commands.
• Cross-site scripting (XSS): Injects scripts into web pages viewed by other users.
• Sideloading: Installing an application from outside the official app store. It may install unauthorized apps, but it does not generally unlock the operating system or enable restricted system features.

• Matching hashes suggest the file has not changed.
• Different hashes indicate that the file was modified, whether authorized or unauthorized.

• Backup: Helps recover the previous version but does not identify or stop unauthorized changes.
• File labels: Classify or mark files; they do not verify integrity.
• Security audit: May discover weaknesses or improper changes, but is periodic and not a direct technical integrity control.

• A: Daily involvement is unnecessary and may not solve the availability problem.
• C: Clarifying all requirements at the start conflicts with agile’s iterative refinement.
• D: Simply reviewing based on availability leaves the problem unresolved and allows rework to continue.

• A: Allow SAN certificates — SANs are used to identify valid hostnames in a certificate. They do not bypass trust validation.
• C: Open the secure LDAP port — A blocked port would normally cause a timeout or connection-refused error, not certificate errors.
• D: Increase the TLS version on the RA — The issue concerns certificate trust, not the organization’s registration authority.

• IaaS: você gerencia a VM e o sistema operacional.
• PaaS: o Azure gerencia a infraestrutura; você se concentra no aplicativo.

• A — Correct: Identify the data required by Salesforce, its dependencies, and how it should be validated. Verification scripts help confirm record counts, relationships, field mappings, and data integrity after migration.
• D — Correct: Use a full sandbox and perform trial migrations using realistic—or appropriately masked—legacy data. This exposes transformation, volume, dependency, and integration issues before production cutover.
• B — Less appropriate: Phased user migration and parallel operation primarily address user adoption and rollout risk, not the technical risks of data migration.
• C — Less appropriate: Although sandbox testing and integration testing are valuable, the option emphasizes test-data generation rather than validating the migration with representative legacy data. “A full sandbox for all systems” may also be impractical.

• Existing measures
• Relationships
• Calculated columns
• Tables and fields
• Existing transformations in the model

• SharePoint folder: Reconnects to the source files. You would likely need to recreate the model and measures.
• Power BI dataflows: Primarily provide reusable data preparation and storage, but they do not automatically provide the existing semantic model and measures.
• Excel workbook: Connects directly to the source file and would also require rebuilding the model and measures.

• SOW
• SLA
• MOA
• MOU

• An Anypoint VPC provides private network connectivity for CloudHub applications.
• An IPsec VPN tunnel or AWS Direct Connect connects that VPC to the customer’s on-premises network without exposing the database to the public internet.
• The VPC and on-premises firewalls must allow the required traffic, routes, and ports.

• Static IP addresses only identify the application’s outbound traffic; they do not create a private network path to the database.
• A Dedicated Load Balancer does not replace the required network connection to the on-premises environment. It is also unnecessary merely to reach individual databases.
• Moving sensitive databases to a DMZ is not the intended architecture and could reduce their protection.

• Install unauthorized or unapproved applications
• Access system areas normally restricted
• Add features unavailable in the default software
• Modify the device’s operating system

• SQL injection (SQLi): Attacks databases by inserting malicious SQL commands.
• Cross-site scripting (XSS): Injects malicious scripts into web pages viewed by users.
• Sideloading: Installs an application from outside the official app store, but it does not necessarily remove the phone’s operating-system restrictions.

• A valid input returns the expected result
• An invalid input raises an error
• Boundary values are handled correctly

• B: Copilot may help generate tests, but it does not automatically write all necessary tests.
• C: Writing the implementation does not verify that it works correctly.
• D: Copilot can suggest test commands or test code, but the developer or development environment must execute and validate the tests.

sql 
CREATE PROCEDURE dbo.usp_CreateOrder 
AS 
BEGIN 
    SET NOCOUNT ON; 
    SET XACT_ABORT ON; 


    BEGIN TRY 
        BEGIN TRANSACTION; 


        INSERT INTO dbo.Orders (/ columns /) 
        VALUES (/ values /); 


        SET @OrderID = SCOPE_IDENTITY(); 


        COMMIT TRANSACTION; 
    END TRY 
    BEGIN CATCH 
        IF @@TRANCOUNT > 0 
            ROLLBACK TRANSACTION; 


        THROW; 
    END CATCH; 
END;

• BEGIN TRY contains the transactional work.
• SCOPE_IDENTITY() retrieves the identity generated by the INSERT; it belongs after the insert, not as the error-handling logic.
• COMMIT runs only if all statements succeed.
• BEGIN CATCH handles failures.
• IF @@TRANCOUNT > 0 prevents attempting a rollback when no transaction is active.
• ROLLBACK undoes partial changes.
• THROW re-raises the original error with consistent details for the application.
• SET XACT_ABORT ON ensures many run-time errors automatically terminate and roll back the transaction.

• C — “when the query finishes”

• D — “when the query began”

• Restarting the device: may fix software problems, but not a directional connection issue.
• Swollen battery: is a safety concern, but would not typically cause recognition only in one orientation.
• Failing cable: possible in general, but less likely because it works on other similar devices.
• Dirty or damaged port: best matches the symptoms. Inspect and carefully clean the port, or have it serviced if damaged.

• A vulnerability scanner automates discovery of known vulnerabilities and misconfigurations across systems. It can contribute to a supply-chain assessment.
• A penetration test actively attempts exploitation and is usually limited to an agreed scope.
• SCAP standardizes vulnerability and configuration assessment data; it is not the analysis itself.
• Illumination tool is not a commonly defined CompTIA Security+ term.

• Check whether the data is accurate, complete, and properly prepared.
• Confirm that the pattern is not caused by an outlier, data-quality problem, or modeling issue.
• If the data is valid, treat the result as a potentially valuable new business insight.

• A: A data scientist may help, but expert validation and data-quality checking come first.
• C: Filtering out inconvenient data risks hiding a valid insight.
• D: Einstein’s result should not be accepted without verification simply because it produced the finding.

• Restrict a port to a defined number of MAC addresses
• Use statically configured or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious traffic but is not the primary control for switch-port MAC limits.
• NGFW: Filters routed network traffic, not the switch’s CAM/MAC address table directly.

• The S3 bucket as an origin for static content
• The Application Load Balancer (ALB) as an origin for dynamic content
• An Amazon Route 53 alias record pointing the application domain to CloudFront

Why this works

• Static data: CloudFront caches objects from S3 at edge locations, reducing latency for users worldwide.
• Dynamic data: CloudFront forwards requests that require application processing to the ALB. It can also maintain persistent connections and use the AWS global edge network to improve delivery performance.
• One domain: CloudFront behaviors can route different path patterns to different origins—for example, /static/* to S3 and other paths to the ALB.

Why the other options are incorrect

• Global Accelerator is designed primarily for accelerating traffic to applications with endpoints such as ALBs, not for caching S3 content.
• Using separate domains or splitting static and dynamic traffic adds unnecessary complexity.
• CloudFront already provides the required global edge distribution and caching, so combining it with Global Accelerator is unnecessary here.

• Employees can use approved devices from remote locations or worldwide offices.
• Users do not need to carry or insert extra hardware.
• It helps prevent account takeovers from unknown devices.

• Geotagging: Restricts access based on location, which could interfere with remote work and travel.
• Smart cards: Require additional physical equipment and card readers.
• Time-based logins: Limit access according to time but do not strongly bind access to an authorized user device.

• Access controls — ensuring only authorized users can access it.
• Encryption — protecting the data if it is intercepted or exposed.

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• Default network device credentials: More associated with external attackers or poor device configuration.
• Spear phishing emails: Commonly used to compromise users, but less characteristic of an insider who already has access.
• Typosquatting and impersonation: Primarily social-engineering techniques aimed at deceiving users.
• Unidentified removable devices: Provide a direct way to transfer data outside the organization and may bypass network monitoring.

• B: Developer Edition has limited user, storage, and data-volume capacity, making realistic community testing difficult.
• C: A Developer Edition org cannot contain sandboxes, so it cannot provide separate environments for development, integration, and UAT.
• E: A standalone Developer Edition org is not part of the production org’s deployment path, so change sets cannot be used to deploy from it directly to that production org. The team would need Metadata API, Salesforce CLI, or another deployment method.

• Microsoft Teams: Connects to Teams-related data, but it isn’t the primary connector for the Power Apps data tables.
• Personal Analytics: Provides personal productivity insights, not application data.
• SQL Server database: Only applies if the app explicitly uses SQL Server as its data source.
• Dataflows: Used for preparing and centralizing data, not as the normal direct connection to a Power Apps app.

• Red team: Simulates attackers; exploits weaknesses to test security.
• Blue team: Defends systems; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team efforts to improve detection and defense.
• White team: Oversees or manages the test, defining rules, scope, and authorization.

• Disaster recovery backups
• Long-term backup retention
• Data archiving that still needs occasional access

• Multi-Regional Storage: Intended for frequently accessed data needing broad geographic availability; it costs more.
• Regional Storage: Suitable for frequently accessed data within one region.
• Nearline Storage: Intended for data accessed roughly once per month, such as monthly backups.
• Coldline Storage: Better fit for backups accessed only during a disaster or occasional recovery event.

1. Create or verify cost groups

1. Set up the item model group

1. Create the costing version

1. Enter or calculate item costs

1. Activate the standard costs

• SAMLRequest: the SAML authentication request
• RelayState: the original destination or application state

• RedirectURL: not the standard SAML parameter for preserving the original request.
• DisplayState: not a standard SAML SSO parameter.
• StartURL: Salesforce-related terminology, but not the standard parameter used in this SAML exchange.

1. Clear principles and boundaries — Employees have freedom, but decisions must remain within clear organizational values, policies and limits.
2. High degree of freedom — Managers are trusted to make decisions rather than seeking continual approval from senior management.
3. Frontline customer responsibility — Customer-facing managers should be empowered to manage customer relationships and respond quickly to needs.
4. Transparent and ethical information — Information should be openly available and used honestly, supporting trust and informed decision-making.

• Creating and managing users and roles
• Granting and revoking roles and privileges
• Managing access-control responsibilities

• SYSADMIN: Manages warehouses, databases, schemas, and other objects—not primarily users and roles.
• PUBLIC: Automatically granted to every user; it is not an administrative role.
• ACCOUNTADMIN: Has the highest level of access, but should be reserved for account-level administration and emergencies rather than routine security tasks.

• vSmart controls the overlay control plane. It uses OMP to exchange routing information, distribute policies, and determine how WAN Edge devices reach one another.
• vManage is the centralized management and configuration platform.
• vBond is the orchestrator. It helps devices authenticate, discover controllers, and traverse NAT during onboarding.
• APIC-EM is not the SD-WAN control-plane component described here.

• How quickly the vendor must respond to an incident or request
• Target resolution times
• Availability or uptime requirements
• Performance metrics and penalties for not meeting them

• SOW (Statement of Work): Describes the project’s scope, tasks, deliverables, and timeline.
• MOA (Memorandum of Agreement): Documents a formal agreement to cooperate or perform specific activities.
• MOU (Memorandum of Understanding): Records a mutual understanding or intent, often less binding than a contract.

• A is correct: Days beyond the included period incur an extra daily charge.
• D is incorrect: Daily use after 10 days is not free.
• B and C: Data-transfer pricing can depend on the direction and service terms. The exam’s intended distinction is that the included device usage period is the clearly stated no-cost benefit.

• BCP (Business Continuity Plan): Ensures the organization can continue its broader business operations during and after a disruption. It is broader than the IT-focused recovery required here.
• Communication plan: Defines how information is shared with employees, the public, and other stakeholders; it does not restore systems.
• IRP (Incident Response Plan): Handles and contains security incidents, such as malware or unauthorized access. A tornado is a disaster, not primarily a cybersecurity incident.

• IRR assumes that interim cash flows can be reinvested at the project’s own IRR. This may be unrealistic, especially when the IRR is very high.
• MIRR assumes reinvestment at a specified rate, usually the company’s cost of capital or another realistic reinvestment rate.

• B: MIRR does not specifically favour projects with long payback periods.
• C: MIRR and IRR can rank competing projects differently.
• D: MIRR is not always higher than IRR; it may be higher or lower depending on the cash flows and reinvestment rate.

• VLAN 10 for data
• VLAN 20 for voice

• A: Describes physical trunking or logical switch ports, not an SVI.
• B: An SVI can provide management access, but that is only one use—not the best description here.
• D: SVI use is not related to running out of physical ports.

• The listener has a virtual IP address on the load balancer.
• The active SQL Server replica must respond using the listener’s IP address, not its own VM IP.
• Floating IP allows the listener IP to be preserved and returned by the active replica.
• This is required for the SQL Always On listener configuration.

• A health probe for the SQL listener/cluster role
• The SQL Server listener port, commonly 1433
• Appropriate backend pool membership