HashiCorp Terraform Associate 003 Exam Prep
HashiCorp Certified: Terraform Associate (Page 23 )

• State is stored remotely in Terraform Cloud/Enterprise, not as a local file.
• Terraform runs (plan/apply) can be executed on remote infrastructure, with results visible in the remote workspace UI.
• Supports workspace-based organization, state locking, and concurrency control.
• Useful for team collaboration, centralized governance, and auditable logs.

• In your configuration, you use a backend block like backend "remote" { ... }.
• You still run terraform init to configure/migrate to the remote backend.
• After setup, terraform plan/terraform apply may be executed remotely, and the outputs/logs appear in the Terraform Cloud/Enterprise UI rather than (only) in your local terminal.

• Other backends store state remotely but typically do not provide remote execution; with the remote backend you get remote runs and a collaborative UI, not just remote state storage.

• Answer: B (False)

• Explanation: The terraform.tfstate file is a snapshot Terraform uses to map your configuration to real resources. It does not always stay perfectly in sync with the live infrastructure. Drift can occur if resources are changed outside Terraform or manipulated directly. You can reconcile this with commands like terraform plan (to see what would change) and terraform refresh (to update the state). The state stored in a backend reflects the last known state, not a guaranteed real-time reflection of reality. See Terraform state documentation for details.

• Answer: False

• Why: The terraform.tfstate file is a snapshot of the resources as Terraform last applied or refreshed them. If someone or something changes infrastructure outside Terraform (drift), the state file may no longer match the real world until you refresh or re-apply. Terraform normally refreshes state during plan/apply, but it is not guaranteed to always be perfectly in sync without a refresh.

• Reduce the training data: Usually makes overfitting worse.
• Add hyperparameters: Hyperparameters already control training; simply adding them does not solve the problem. Proper tuning could help, but that is not what the option states.
• Increase training time: More training can worsen overfitting if the model is already memorizing the training data.

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• Customer information must not be revealed ? PII Detection
• Malicious instructions embedded in images/documents must be blocked ? Prompt Shields

• If the question allows multiple selections, choose PII Detection and Prompt Shields.
• If it requires one selection specifically for the image-based threat, choose Prompt Shields.

• Security groups
• Dynamic security groups
• Cloud-only or synchronized security groups

• Microsoft 365 groups
• Distribution groups
• Mail-enabled distribution groups

• C. The agent orchestration method
• D. The average session time per agent

• Orchestration method: Classic and generative orchestration can have different processing and credit-consumption patterns. Changing the method can affect estimated operating costs.
• Average session time: Longer sessions generally involve more interaction processing, which affects projected usage, credits, and ultimately ROI.

• GPT models used: Important for technical design, but not the primary usage-estimator factor identified in this scenario.
• Average characters in a chat message: Message length alone is not the key business-use projection requested here.

• Self-signed certificate: Causes a browser security warning, not incorrect name resolution.
• Nameserver record: A DNS problem would typically affect multiple users, not just one workstation.
• IP helper: Relays services such as DHCP across network segments; it does not resolve website names.

• Defender for Servers is the Defender for Cloud plan that protects Azure VMs and generates security alerts that can be reviewed in Defender for Cloud.
• Azure Diagnostics extension collects guest OS monitoring data, but it does not onboard VMs to Defender for Cloud or provide Defender security alerts.
• Data connectors are used for Sentinel integrations.
• Azure Storage Analytics and workflow automation do not provide VM protection.

• Minimum
• Maximum
• Average
• Count
• Null/empty values
• Distinct values

• Enable column profile
• Enable details pane
• Show column profile in details pane

• Firewall
• Intrusion prevention and detection
• Antivirus or antimalware
• Web and email filtering
• Virtual private networking (VPN)
• Sometimes content filtering and centralized reporting

DAX 
Blue Sales = 
CALCULATE( 
    [Total Sales], 
    KEEPFILTERS('Product'[Color] = "Blue") 
)

• CALCULATE evaluates [Total Sales] after applying an additional filter.
• 'Product'[Color] = "Blue" restricts the calculation to blue products.
• KEEPFILTERS ensures the existing filter context is preserved. For example, filters for year, region, or customer remain active. If Color is already filtered, the blue condition is applied as an intersection rather than replacing the existing filter.
• Avoid ALL, because it removes filters and would not maintain the existing context.

• The message came from the claimed sender (authentication)
• The message was not altered (integrity)
• The sender cannot easily deny sending it (non-repudiation)

• Attackers can send unsigned phishing emails.
• Attackers may compromise a legitimate account and send signed malicious emails.
• Users may still be tricked by a validly signed message.

• LastName: Required.
• FirstName: Optional.
• AccountId: Optional; a Contact may be associated with an Account later or remain private, depending on organization settings.
• Name: A compound display field made from first and last name; it isn’t entered as a separate field.

• Note the question number before leaving—for example, Question 38.
• Use the exam’s question navigator or Back/Previous button to return to that number.
• If you close or refresh the page, your position may not be saved, depending on the site. Reopen the page and select the question number again.
• Avoid using the browser’s Back button if it causes the exam page to reload; use the exam’s built-in navigation instead.

• A. PsFile — Correct: Displays files opened remotely on a system. This reveals shared resources and user activity.
• B. UserInfo — Correct: Gathers information about user accounts, supporting account and privilege enumeration.
• C. PsPasswd — Answer key lists it: This is questionable. PsPasswd is primarily used to change passwords remotely, not enumerate information. The key may classify it broadly as a Windows account-management tool, but it is not a strong enumeration example.
• D. WinSSLMiM — Incorrect: Used for SSL man-in-the-middle activity, not enumeration.

• Identifies which user or department owns the device
• Supports inventory and compliance requirements
• Enables tracking of lost, stolen, retired, or unauthorized devices
• Helps enforce security controls such as mobile-device management and secure configuration

• Insert is used when you are creating a new record. It saves the record to the table and then leaves the form.
• Update is used when editing an existing record. It saves the modifications and then leaves the form.

• Guest access: Controls external users invited into your teams as guests. It is not the primary setting for restricting federated communication by domain.
• Messaging policy: Controls messaging features, such as chat or message editing, rather than which organizations users can communicate with.
• Org-wide Teams settings: Contains broad Teams-wide configuration, but domain-based external communication is configured under External access.

• Static testing examines source code or compiled code without running it. Since the source code is unavailable, this is not the best choice.
• Dynamic testing evaluates the application while it is running. It is commonly used for black-box testing, so it does not require source-code access.
• Penetration testing simulates attacks and can certainly assess a deployed application, but it is broader than simply evaluating the software’s security.
• Vulnerability testing generally looks for known weaknesses and may not thoroughly test application behavior or business logic.

• Information sources: Collect security-related data, such as network packets, system logs, audit records, or application events.
• Analysis: Examines the collected data to identify suspicious activity, attacks, or policy violations.
• Response: Takes or recommends action, such as generating alerts, logging the event, or supporting a protective response.

• Access List: controls whether a client is allowed or denied.
• Connect List: controls which wireless networks/APs a station may connect to.

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

• Elasticity: Automatically increases or decreases resources based on demand.
• Scalability: The ability to increase capacity to handle more workload.
• Low latency: Minimizes network response time; it does not provide protection from failures.

Why this is correct

• Each user authenticates with their own Google account.
• Google manages the user’s SSH key association.
• IAM controls who can access instances.
• Access can be audited by user identity, so security can determine who accessed a VM.
• Granting the role to a Google group avoids managing permissions individually.

Why the others don’t apply

• A: A shared private key is difficult to distribute securely and cannot reliably identify which employee used it.
• B: Manually collecting and deploying keys on every instance is operationally inefficient and complicates auditing.
• D: A project-wide shared key has the same identity and key-management problems as option A. It also does not provide per-user accountability.

• Constrained VMs: VMs whose workloads are experiencing resource pressure, such as insufficient CPU or memory. They may need additional resources or optimization.
• Overprovisioned VMs: VMs allocated more CPU, memory, or storage than their workloads require. Their resources may be reclaimed or reduced.

• Underprovisioned VMs: This is not the predefined view identified for this report question.
• Zombie VMs: These are typically inactive or unused VMs and are useful for cleanup, but they are not the two views specifically intended here to identify inefficient resource allocation.

• Determine the project budget — Budget development is a separate cost-management activity.
• Develop a communication plan — This belongs to project communications planning, not schedule completion.
• Establish baselines — Baselines are created after the schedule and related plans have been developed and approved. They formally capture the approved plan.

• Escape to host: A virtualization attack where code escapes a guest VM and accesses the host system. Nothing in the scenario mentions virtualization.
• Browser extension: Can redirect or manipulate web-browser traffic, but not normally database-server traffic.
• Valid accounts: Describes using stolen or compromised credentials, not redirecting network traffic.
• Process injection: Injecting malicious code into a legitimate database or networking process could allow an attacker to alter how that process handles outgoing traffic.

• Azure Machine Learning Studio is designed to build, test, train, and deploy machine-learning models, including predictive analytics.
• Azure Cosmos DB is a globally distributed NoSQL database. It can store data used by an AI solution, but it is not the primary service for developing and deploying predictive models.
• Therefore, the appropriate recommendation is Azure Machine Learning Studio, as shown in Question 15.

• Endpoint Manager: manages hosts and sensor-related settings.
• Falcon Investigator: supports investigation and analysis, but does not necessarily grant RTR access.
• Remediation Manager: handles remediation-related actions rather than interactive host access.

• A — Tables
• B — Named file formats
• C — Schemas
• E — Databases

Why these are correct

• Tables: Can be cloned using CREATE TABLE ... CLONE. The clone initially uses zero-copy cloning, so storage is shared until changes are made.
• Named file formats: Can be cloned as database objects, preserving the file-format definition.
• Schemas: A schema and its eligible objects can be cloned.
• Databases: A database and its eligible schemas and objects can be cloned.

Why the others are incorrect

• Shares: A share is an account-level data-sharing object, not a normal cloneable database object.
• Users: Users are security principals and cannot be cloned with CLONE.

1. System prompts can authorize users — No

1. System prompts can reduce TPM consumption — Yes, with qualification

1. System prompts guide generative AI behavior — Yes

• A script of cloud CLI commands: IaC because the commands can be saved, reviewed, versioned, and rerun consistently.
• Manually run curl commands: Not necessarily IaC; they are manual actions unless organized into an automated script.
• A sequence of REST requests passed to an API: Could represent automation, but the wording does not explicitly say they are stored and executed as reusable code.
• Commands entered into a cloud console: Manual operation, not IaC.

• Bronze: Raw ingested data
• Silver: Cleaned, validated, and transformed data
• Gold: Business-level data for analytics, dashboards, and reporting

• B. Versioned configuration files — Infrastructure is defined in machine-readable files and tracked in version control, allowing repeatable provisioning and change history.
• D. Docker files — Assuming “Doctor files” is a typo for Dockerfiles, a Dockerfile declaratively defines how to build a container image and is commonly considered infrastructure/configuration as code.

• A. Cloned virtual machine images — These are prebuilt infrastructure artifacts, but cloning an image is not itself a code-based infrastructure definition.
• C. Change management database records — A CMDB records information about infrastructure; it does not define or provision that infrastructure.

• A — Use a custom controller: An Apex class can contain the page’s logic.
• C — Use a standard controller with extensions: The standard controller provides basic CRUD behavior, while an extension adds custom logic.
• E — Use a standard controller: Useful when the page works mainly with one Salesforce object and needs standard functionality.

• A page with no controller for static or controller-free content.
• A custom controller with extensions; extensions are not limited only to standard controllers.

• A — Use getRecordTypeInfosByDeveloperName()

apex 
  Id rtId = Schema.SObjectType.Account 
      .getRecordTypeInfosByDeveloperName() 
      .get('Business_Account') 
      .getRecordTypeId();

• C — Query the RecordType object

apex 
  RecordType rt = [ 
      SELECT Id 
      FROM RecordType 
      WHERE SObjectType = 'Account' 
      AND Name = 'Business Account' 
      LIMIT 1 
  ];

• B: An outbound SOAP call is unnecessary and inefficient.
• D: Hardcoding an ID is not dynamic, and IDs can differ between orgs.

• desktopwidth:i:1280
• desktopheight:i:1024

• Connection information: Controls connection-related settings, not the desktop resolution.
• Scaling plan: Controls when session hosts start, stop, or scale based on demand.
• Session behaviour: Controls behavior such as disconnect or logoff handling.
• Display settings: Specifically controls RDP display properties, making it the appropriate choice.

Recommended process

1. Access each switch’s terminal.
2. Use help to identify available commands.
3. Use the MAC table command, such as:

text 
   show mac-address-table

1. Use VLAN information, such as:

text 
   show vlan

1. Use interface information, such as:

text 
   show ip interface brief

1. Record each device’s:

• CBWFQ (Class-Based Weighted Fair Queuing): Creates traffic classes and assigns each class a guaranteed bandwidth or queueing treatment.
• PQ (Priority Queuing): Uses multiple queues with strict priority. Higher-priority queues are serviced before lower-priority queues, making it useful for delay-sensitive traffic—but it can starve lower-priority traffic.

• FRTS: Traffic shaping for Frame Relay; it controls the transmission rate rather than selecting packets during congestion.
• CAR: Polices traffic by rate, typically dropping or remarking packets that exceed a limit.
• PBR: Policy-Based Routing; it selects forwarding paths and is not a QoS queueing mechanism.

Correct sequence

1. Merge Sales_Region with Sales_Manager using an inner join

1. Merge Region_Manager with Manager using an inner join

1. Merge Sales_Region and Region_Manager using a right join as a new query

• Atomicity: a write fully succeeds or does not appear.
• Consistency: table state remains valid.
• Isolation: concurrent operations do not corrupt one another.
• Durability: committed changes persist.

• Flexible schemas: common data lakes often support flexible or schema-on-read data.
• Open-source formats: common data lakes commonly use open formats such as Parquet.
• Scalable storage: cloud data lakes already provide scalable storage.

• Complex inputs: A queueable job can accept and retain complex data such as Map<Id, Project__c> and List<Account>.
• Callouts: The class should implement both:

apex 
  public class ProjectJob implements Queueable, Database.AllowsCallouts { 
      // execute method 
  }

• Execution confirmation: System.enqueueJob() returns an AsyncApexJob ID. You can use that ID to query job status and confirm whether the job completed successfully.

• @future(callout=true) supports callouts, but future methods have more restrictive parameter types and return no job ID for tracking.
• Database.AllowsCallouts is only an interface that permits callouts; it is not an asynchronous mechanism by itself.
• Schedulable is intended for jobs that run at a scheduled time, not primarily for submitting a long-running asynchronous operation.

• Sets a high initial price for a new product.
• Targets customers willing to pay more, often called early adopters.
• Gradually reduces the price to attract more price-sensitive customers as the product becomes less novel and competition increases.

• Penetration pricing: starts with a low price to gain market share quickly.
• Premium pricing: maintains a high price to communicate superior quality or status; it does not necessarily involve later price reductions.
• Loss leader pricing: sells one product at a very low price, sometimes below cost, to attract customers who may buy other products.

• Self-signed certificate — Causes a certificate trust warning, not incorrect name resolution.
• Nameserver record — A DNS record problem would usually affect multiple users, unless only this computer uses a different DNS server.
• IP helper — Relays certain network services, commonly DHCP, between subnets; it does not normally determine website name resolution.

• The Speech resource subscription key
• The Azure region
• Optional endpoint and speech settings

python 
speech_config = speechsdk.SpeechConfig( 
    subscription=key, 
    region=region 
)

• SpeechSynthesizer converts text to speech.
• It uses a SpeechConfig, but it does not configure the service connection itself.

• AudioConfig: Defines audio input or output sources.
• AudioOutputConfig: Defines where synthesized audio should be sent.
• SpeechConfig: Configures the Azure Speech service connection.

• The load balancer provides the listener’s frontend IP address.
• The active SQL Server node must also respond to that same listener IP.
• Enabling Floating IP allows the listener IP to be preserved and handled correctly by the active replica.
• Without it, SQL connections may be sent to a node that cannot correctly claim the listener address.

• A health probe for the SQL Server port
• A load-balancing rule using the listener port
• Floating IP enabled on that rule

• Smartphones and tablets
• Laptops and workstations
• Other mobile or endpoint computing devices

• Separate development, test, and production environments
• Building components in unmanaged solutions during development
• Organizing solutions by functional area
• Exporting and deploying managed solutions to production
• Validating changes before production deployment
• Preventing developers from overwriting one another’s production changes