HP HPE0-G01 Exam Prep
HPE GreenLake Administrator Essentials (Page 6 )

• Microservices: An application-design approach that divides an application into smaller services. It does not inherently reduce the number of operating systems.
• Virtualization: Creates virtual machines, but each VM generally requires its own complete operating system. This improves isolation but does not minimize OS instances as effectively.
• Infrastructure as code: Uses code to automate infrastructure deployment and configuration. It improves consistency but does not determine how many operating systems are used.

• The listener has a virtual IP address on the load balancer.
• The active SQL Server replica must respond using the listener’s IP address, not its own VM IP.
• Floating IP allows the listener IP to be preserved and returned by the active replica.
• This is required for the SQL Always On listener configuration.

• A health probe for the SQL listener/cluster role
• The SQL Server listener port, commonly 1433
• Appropriate backend pool membership

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

1. Create a custom Sensitive Information Type (SIT) in the Microsoft Purview portal.
2. Use a regular expression to match the 32-character alphanumeric account number.
3. Reference that SIT in the DLP policy protecting SharePoint Online.

• Format-based data ? custom SIT with RegEx
• Built-in sensitive data ? Microsoft-provided SIT
• Document classification/protection ? sensitivity labels
• Security investigation queries ? Advanced Hunting, not DLP detection

• Basic: No technical or architectural guidance.
• Standard: Technical support, but not the required design-assessment service.
• Professional Direct: Provides advisory and architecture guidance.
• Premier: Provides it too, but is unnecessarily expensive for this requirement.

• Open or insecure ports
• Enabled legacy or insecure protocols
• Known vulnerabilities and misconfigurations
• Weak services and outdated software

• curl tests web requests and HTTP-based services.
• Wireshark captures and analyzes network traffic; it does not normally scan servers for weaknesses.
• netcat can test connectivity to individual ports and sometimes grab service banners, but it is not a comprehensive vulnerability scanner.

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

• vBond — orchestration plane: Authenticates devices, helps them discover each other, and assists with NAT traversal and initial control-connection setup.
• vSmart — control plane: Distributes routing and policy information to WAN Edge devices using the overlay control plane.
• vManage — management plane: Provides centralized configuration, monitoring, and orchestration through its GUI/API.
• WAN Edge — data plane: Forwards user traffic across the SD-WAN fabric.

• Compare each server’s drive specifications and performance data.
• Identify the drive that is faulty, slow, or mismatched.
• Replace it with a drive that matches the required interface, capacity, and performance characteristics.
• Avoid selecting a slower drive, because storage performance can bottleneck the entire server.
• In a redundant array, use a compatible replacement so rebuilding does not create unnecessary performance degradation.

• Leaf switches provide access ports for servers, users, and other devices.
• Spine switches provide the backbone between leaf switches.
• Every leaf switch connects to every spine switch, creating a predictable, full-mesh fabric between the two layers.
• Leaf switches do not connect directly to other leaf switches, and spine switches do not connect directly to other spine switches.

• A: Adding both a spine and leaf is unnecessary for simply adding access ports.
• B: It focuses on uplink speed, not the scalable topology.
• D: A single spine connection creates a bottleneck and a single point of failure.

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• Each team’s Bedrock workflow uses a separate IAM service role.
• The role’s Amazon S3 permissions can be limited to only that team’s customer folder or objects.
• This enforces least privilege and prevents one team’s Bedrock application from accessing another team’s data.
• Access is enforced by AWS permissions, not by asking users to provide a customer name in each request.

• A single role with broad S3 access does not provide team-level isolation.
• Asking teams to specify a customer name is not an access-control mechanism.
• Redacting data does not prevent unauthorized access.
• A bucket policy alone is insufficient unless it explicitly enforces the required team-role restrictions.

• DB1 (500 TB): Azure Data Box Heavy

• Virtual machines: Azure Migrate

• R-squared: Typically used for regression, not classification.
• RMSE: Measures prediction error for continuous numerical values, so it is not the best fit here.
• Learning rate: A training hyperparameter that controls how quickly the model updates its weights; it is not an evaluation metric.

• A — Custom Button: A button can launch a flow, typically by passing the flow’s URL and record context.
• D — From a Process: A Process can invoke a flow using an Apex action configured for flow invocation. However, this is automation-triggered, not directly accessed by a user.
• B — Quick Action: In current Salesforce functionality, a Flow Quick Action can launch a screen flow directly from a record page. This makes B a valid modern method.
• C — Visual Workflow Launcher: This is not generally listed as a standard access method in current Salesforce terminology; Salesforce commonly uses the Flow component on Lightning pages instead.

• VM CPU, memory, disk, and network usage
• Storage transactions and latency
• App Service response time
• Database DTU or CPU utilization

• Azure Traffic Analytics analyzes network traffic flows and security patterns; it is not the general infrastructure metrics tool.
• Azure Activity Log records subscription-level control-plane operations, such as resource creation, deletion, or configuration changes.
• Azure Advisor provides recommendations about cost, security, reliability, performance, and operational excellence, but it is not the primary tool for investigating live metrics.

• Documented and evaluated
• Assessed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked with version history and rollback procedures

• Risk management process: May help assess the issues, but it does not authorize and manage design changes.
• Product design process: Applies primarily while creating a new design.
• Design review process: Normally evaluates a design before release; this design is already released.

• Custom domain: miami.weyland.com requires a paid App Service tier; Free and Shared are unsuitable.
• Two instances: Standard supports scaling to multiple instances.
• SSL: Standard includes SSL support.
• 12 GB storage: Basic provides only about 10 GB, so it does not meet the requirement. Standard provides substantially more storage.
• Cost minimization: Standard is the lowest tier among the choices that satisfies all requirements.

text 
interface GigabitEthernet0/0.10 
 encapsulation dot1Q 3

• .10 is the router’s local subinterface number.
• dot1Q 3 identifies the 802.1Q VLAN tag carried on the trunk.

text 
interface GigabitEthernet0/0.3 
 encapsulation dot1Q 3

text 
interface GigabitEthernet0/0.2 
 encapsulation dot1Q 2

• AWS Budgets lets you create a cost or usage budget and configure alerts when actual or forecasted spending reaches a threshold. Notifications can be sent through email or Amazon SNS.
• Amazon CloudWatch can monitor AWS billing metrics and trigger an alarm when estimated charges exceed a specified amount.

• Amazon SQS is a message queue, not a cost-monitoring service.
• Cost Explorer analyzes spending but does not directly provide threshold notifications.
• AWS Cost and Usage Report delivers detailed billing data for analysis; it does not itself send threshold alerts.

1. Selling price per unit: $750
2. Required annual return:

1. Required profit per unit:

1. Target cost per unit:

• A. Modify CommunitiesSelfRegController

• C. Configure Communities registration to use a custom Visualforce page

• B. Modify the self-registration trigger — There is no standard “self-registration trigger” intended for this configuration. The registration logic is handled by the Visualforce controller.
• D. Configure a custom Apex controller — The standard approach is to modify the provided CommunitiesSelfRegController, rather than simply selecting a separate controller configuration.

• BCP (Business Continuity Plan): Ensures the organization can continue its broader business operations during and after a disruption. It is broader than the IT-focused recovery required here.
• Communication plan: Defines how information is shared with employees, the public, and other stakeholders; it does not restore systems.
• IRP (Incident Response Plan): Handles and contains security incidents, such as malware or unauthorized access. A tornado is a disaster, not primarily a cybersecurity incident.

• How quickly the vendor must respond to an incident or request
• Target resolution times
• Availability or uptime requirements
• Performance metrics and penalties for not meeting them

• SOW (Statement of Work): Describes the project’s scope, tasks, deliverables, and timeline.
• MOA (Memorandum of Agreement): Documents a formal agreement to cooperate or perform specific activities.
• MOU (Memorandum of Understanding): Records a mutual understanding or intent, often less binding than a contract.

1. Select Exchange email as a location.
2. Use the built-in Azure Storage Account key sensitive information type as the condition.
3. Configure the DLP action to encrypt the email—for example, using Microsoft Purview Message Encryption.

1. Define – establish the project’s objectives, scope, feasibility and requirements.
2. Design – plan how the project will be carried out, including resources, schedules and controls.
3. Deliver – execute the project and produce the required outputs.
4. Develop – close the project formally and capture learning for future projects.

• Filing documentation and records
• Closing project and accounting systems
• Settling costs
• Handing over the completed work and obtaining sign-off
• Reviewing performance and giving feedback

• Drops packets when traffic exceeds a certain bitrate: This describes traffic policing, not shaping.
• Fragments large packets and queues them: Shaping does not fragment packets as its primary congestion-control action.
• Drops packets randomly from lower-priority queues: Packet dropping may occur if a shaping queue becomes full, but it is not the defining behavior.

• Shaping: buffers and delays excess traffic.
• Policing: drops or marks traffic that exceeds the configured rate.

• Transfer — przeniesienie skutków lub kosztów ryzyka na inna organizacje, np. przez ubezpieczenie lub umowe.
• Akceptacja — firma swiadomie przyjmuje ryzyko bez dodatkowych dzialan.
• Mitigacja — zmniejszenie prawdopodobienstwa wystapienia ryzyka lub jego wplywu, np. przez wdrozenie kontroli bezpieczenstwa.
• Unikanie — calkowite wyeliminowanie ryzykownej dzialalnosci.

• Azure Machine Learning is the overall Azure service.
• Machine Learning designer is the visual, drag-and-drop interface within Azure Machine Learning.
• Microsoft may refer to the broader product as Azure Machine Learning studio, while “Designer” remains the specific visual workflow tool.

• Azure Logic Apps: Workflow and integration automation.
• Azure Batch: Large-scale parallel or batch compute.
• Azure Cosmos DB: Globally distributed NoSQL database.

• Install unauthorized or unapproved applications
• Access system areas normally restricted
• Add features unavailable in the default software
• Modify the device’s operating system

• SQL injection (SQLi): Attacks databases by inserting malicious SQL commands.
• Cross-site scripting (XSS): Injects malicious scripts into web pages viewed by users.
• Sideloading: Installs an application from outside the official app store, but it does not necessarily remove the phone’s operating-system restrictions.

• Mesh: WAPs communicate wirelessly with one another, often to extend coverage without wired connections. It does not specifically describe centralized WLC management.
• Point-to-point: Connects two specific devices or locations.
• Ad hoc: Wireless devices communicate directly with one another without an access point.

• SQL injection
• Cross-site scripting (XSS)
• Malicious file uploads
• Common web-application exploits

• Layer 4 firewall: Filters primarily by IP addresses, ports, and transport protocols; it lacks detailed web-application inspection.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specialized for protecting web applications.
• UTM: Combines several security functions in one device, but it is not specifically focused on web-application attacks.

• 25 — Traditional SMTP server-to-server delivery; often restricted for client submission and not inherently encrypted.
• 110 — POP3 for retrieving email; unencrypted by default.
• 143 — IMAP for retrieving and synchronizing email; unencrypted by default.
• 587 — Authenticated SMTP submission, commonly secured with STARTTLS.

1. Define Power Platform DLP policies

1. Add custom prompt modifications

1. Conduct adversarial testing

• Looking up accounts, contacts, and opportunities
• Logging calls and updating Salesforce records
• Accessing previously available customer information when temporarily offline

• Salesforce Touch App: Primarily an older tablet-focused experience, not the best general solution for the sales team.
• Custom hybrid app: Unnecessary development when Salesforce provides the required capabilities natively.
• SalesforceA: Intended mainly for Salesforce administrators, not sales representatives.

• A — Correct: Identify the data required by Salesforce, its dependencies, and how it should be validated. Verification scripts help confirm record counts, relationships, field mappings, and data integrity after migration.
• D — Correct: Use a full sandbox and perform trial migrations using realistic—or appropriately masked—legacy data. This exposes transformation, volume, dependency, and integration issues before production cutover.
• B — Less appropriate: Phased user migration and parallel operation primarily address user adoption and rollout risk, not the technical risks of data migration.
• C — Less appropriate: Although sandbox testing and integration testing are valuable, the option emphasizes test-data generation rather than validating the migration with representative legacy data. “A full sandbox for all systems” may also be impractical.

• B: Moving the task may affect the critical path and should not be done before evaluating the planned response and impacts.
• C: Excluding a required task is not appropriate without formal analysis and stakeholder approval.
• D: Lessons learned and the risk log should be updated, but only after or alongside managing the immediate issue; updating them is not the first action.

• Date: 2018-12-31
• Time: 08:59

• B: The original value contains the text at, so it cannot be converted directly to a date.
• A: The last characters contain the time, not the date.
• D: Extracting the first 11 characters can leave an unwanted space and does not properly separate the time component.

• A Layer 2 switch checks the destination MAC address in its MAC address table (CAM table).
• If the destination MAC is unknown, the switch cannot select a specific outgoing port.
• It therefore performs unknown-unicast flooding, sending the frame out every other port in that VLAN.
• The frame is not sent back through the port where it arrived.

• Low usage during the first three weeks
• Very high usage during the last week

• High availability: Keeps services running despite failures.
• High latency: Means slow response times; it is not a benefit.
• Load balancing: Distributes traffic across resources but does not specifically address scaling resources up and down.

• Vertical scaling (scale up) means increasing the size of an existing VM—for example, adding CPU or RAM.
• Vertical scaling down means reducing the VM’s size when less capacity is needed.
• Horizontal scaling (scale out) means adding more VM instances rather than making one VM larger.
• Elasticity is the broader ability to automatically adjust resources based on demand; it does not specifically mean adding CPU or memory to one VM.
• Agility refers to the ability to provision or change resources quickly.

• 800 devices ? a scalable, centralized solution is needed.
• Four hardware/vendor classes ? the tool must handle different drivers and images.
• Two user groups ? it should allow different configurations for each group.
• “Distribute custom images” ? an imaging/deployment tool is required, not just a file-copy utility.

• A — Securing information assets: This is the responsibility of management and operational/security teams.
• B — Validating protection: Correct. The auditor checks whether controls—such as access restrictions, encryption, retention, and handling procedures—match the asset’s classification.
• C — Ensuring alignment with regulations: Management and legal/compliance functions typically establish classification requirements; the auditor may assess compliance but does not primarily define alignment.
• D — Defining classification levels: This is a management responsibility based on business needs, risk, and regulatory obligations.

• Azure Cosmos DB is a globally distributed NoSQL database service. It stores and retrieves application data, but it does not provide the tools needed to build, test, and deploy predictive analytics models.
• Azure Machine Learning—including the historical Azure Machine Learning Studio—is designed for the machine-learning lifecycle:

• Confirm the required columns and data types
• Identify the target/label column
• Handle missing or duplicate records if present
• Transform data into a suitable format
• Split it into training and validation/test datasets

1. Prepare the training data
2. Select an algorithm or configure AutoML
3. Train the model
4. Evaluate its performance
5. Tune hyperparameters if needed
6. Deploy the model

• Fileless malware: Nothing in the command indicates malware executing only in memory.
• Living-off-the-land binaries: Mimikatz is a credential-access tool, not a normal system utility used for LOLBin abuse.
• Social engineering: The command shows technical credential abuse, not manipulation of an accountant.

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

yaml 
clusterIP: None

• CronJob: Runs Jobs on a schedule and normally does not need stable networking.
• Deployment: Manages interchangeable, stateless replicas and usually uses a regular Service.
• DaemonSet: Runs a Pod on selected nodes but does not inherently require stable Pod identities.

• Blue team: Defends systems, monitors activity, and responds to attacks.
• Purple team: Coordinates red- and blue-team activities to improve defenses.
• White team: Oversees or manages the exercise, including rules and scope.

• Online payment fraud
• Account takeover
• Fake account creation
• Suspicious transactions