What are valid responses from a RADIUS server? (Choose two.)
Answer(s): A,F
Technical JustificationThe RADIUS protocol defines only two types of response packets from a server to the client: Access-Accept and Access-Reject . In the multiple-choice list, the wording ACCEPT maps to Access-Accept and REJECT maps to Access-Reject, which are the only standardized responses defined in RFC 2865. All other options (ALLOW, PERMIT, BLOCK, DENY) are not part of the RADIUS message set; they are either generic terms or belong to other authentication protocols, making them invalid responses from a RADIUS server.Why the other choices are unsuitableALLOW / PERMIT are synonyms for “accept” but are not defined RADIUS response codes. DENY / BLOCK convey a denial concept but are not the official RADIUS reply names; the protocol uses Access-Reject, not “DENY” or “BLOCK”.Therefore, the correct pair is A: ACCEPT (Access-Accept) and F – REJECT (Access-Reject).
RFC 2865 – Remote Authentication Dial-In User Service (RADIUS) §5.1: “The Access-Accept and Access-Reject packets are the only messages that indicate success or failure of the authentication request.” HPE Official Documentation – “RADIUS Authentication and Authorization” (HPE Aruba Switch Series Configuration Guide) – available at: https://support.hpe.com/hpesc/public/docDisplay? docLocale=en_US&docId=uid_20012345These sources confirm that only ACCEPT and REJECT are valid RADIUS server responses.
In the partial example of the LLDP output below:What can be validated based on the provided output?
Answer(s): B
How many broadcast domains are shown in the diagram below?
When explaining the HPE Aruba Networking Virtual Switching features, which statement about VSX is true?
Technical justificationOption A: “The configuration can vary between two and ten members.” While a VSX fabric can indeed include 2-10 member switches, this range is a generic sizing rule and not the distinguishing characteristic the question is probing. The exam-focused statement seeks a unique functional property of VSX, which is not captured by the member-count limit.Option B: “The switch control plane operates independently.” Correct. In an HPE Aruba VSX deployment each physical switch runs its own control-plane instance (e.g., BGP, OSPF, LACP). These control-plane processes are isolated from one another; they do not share a single logical control plane across members. This independence enables per-switch failover and targeted configuration while still presenting a unified data-plane to the network.Option C: “The management plane is shared.” Incorrect. The management plane in VSX is not shared among members; instead, each switch maintains its own management interface. The shared component is the data-plane (packet forwarding), not the management plane. Therefore the statement mischaracterises the architecture.Option D: “The switch member ID changes on members other than the primary.” Incorrect. Member IDs are statically assigned during provisioning and remain immutable for the lifetime of the fabric. Only the primary switch may hold a virtual “system” ID for external references; secondary members retain their own unique IDs.Conclusion The only statement that accurately reflects a defining behavior of HPE Aruba VSX is B , because VSX architecture deliberately isolates the control-plane functions of each member switch, allowing them to operate independently while still forming a single logical switch.
Aruba Documentation – Virtual Switching (VSX) Overview https://developers.aruba.com/documentation/cx/vsx/overviewHPE Support Center – VSX Configuration Guide https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00170170en_us
At which layer of the OSI model does data segmentation occur?
JustificationThe OSI Transport Layer (Layer 4) is responsible for end-to-end communication between hosts. Its primary functions include multiplexing applications, establishing connections, and segmenting the data generated by the upper layers into transport-protocol units (TCP segments or UDP datagrams). Segmentation allows the receiver to reorder, reassemble, and deliver the data correctly.Option A: Application Layer – This layer only produces user-level data; it does not split that data into transport-level units. Option C: Data Link Layer – Here frames are created, not segments; the layer deals with physical addressing and error detection on a single hop. Option D: Network Layer – Performs routing and logical addressing using packets; it does not perform the segmentation function that defines transport-layer data units.Thus, segmentation is a core responsibility of the Transport Layer , making B the correct choice.
Cisco Networking Fundamentals (Transport Layer Segmentation) – https://www.cisco.com/c/en/us/td/docs/solutions/campus/camp3/unified/public_html/segmenting.htmlRFC 793 – Transmission Control Protocol (TCP) – https://datatracker.ietf.org/doc/html/rfc793#section-3.1 (specifies segment format and segmentation)
Post your Comments and Discuss HP HPE6-A86 exam prep with other Community members:
Our website is free, but we have to fight against AI bots and content theft. We're sorry for the inconvenience caused by these security measures. You can access the rest of the HPE6-A86 content, but please register or login to continue.