Free HPE7-A01 Exam Braindumps (page: 1)

Page 1 of 30

Which feature supported by SNMPv3 provides an advantage over SNMPv2c?

  1. Transport mapping
  2. Community strings
  3. GetBulk
  4. Encryption

Answer(s): D

Explanation:

Encryption is a feature supported by SNMPv3 that provides an advantage over SNMPv2c. Encryption protects the confidentiality and integrity of SNMP messages by encrypting them with a secret key. SNMPv2c does not support encryption and relies on community strings for authentication and authorization, which are transmitted in clear text and can be easily intercepted or spoofed. Transport mapping, community strings, and GetBulk are features that are common to both SNMPv2c and SNMPv3.


Reference:

https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos- solutions/snmp/snmp.htm https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos- solutions/snmp/snmpv3.htm



You are doing tests in your lab and with the following equipment specifications · AP1 has a radio that generates a 10 dBm signal
· AP2 has a radio that generates a 11 dBm signal
· AP1 has an antenna with a gain of 9 dBi
· AP2 has an antenna with a gain of 12 dBi.
· The antenna cable for AP1 has a 2 dB loss
· The antenna cable for AP2 has a 3 dB loss
What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for APT?

  1. 26 dBm
  2. 30 dBm
  3. 17 dBm
  4. -12 dBm

Answer(s): C

Explanation:

The calculated Equivalent Isotropic Radiated Power (EIRP) for AP1 is 17 dBm. EIRP is the measured radiated power of an antenna in a specific direction. It is equal to the input power to the antenna multiplied by the gain of the antenna. It can also take into account the losses in transmission line, connectors, and other components. The formula for EIRP is:
EIRP = P + G - L
where P is the output power of the radio, G is the gain of the antenna, and L is the loss of the cable and connectors.
For AP1, we have:
P = 10 dBm G = 9 dBi L = 2 dB
Therefore,
EIRP = 10 + 9 - 2 EIRP = 17 dBm



With Aruba CX 6300. how do you configure ip address 10 10 10 1 for the interface in default state for interface 1/1/1?

  1. int 1/1/1. switching, ip address 10 10 10
  2. int 1/1/1. no switching, ip address 10 10 10.1/24
  3. int 1/1/1. ip address 10.10.10.1/24
  4. int 1/1/1. routing, ip address 10.10.10

Answer(s): B

Explanation:

To configure an IP address for an interface in default state for interface 1/1/1 on Aruba CX 6300 switch, you need to disable switching on the interface first with the command no switching. Then you can assign an IP address with the command ip address. The other options are incorrect because they either do not disable switching or use invalid keywords such as switching or routing.


Reference:

https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch01.html https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch02.html



A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several AP-515s and AP-575S. Cables running to theAPs are not labeled. The VLANs are already preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests) What is the correct configuration to ensure that APs will work properly? A)



B)



C)



D)

  1. Option A
  2. Option B
  3. Option C
  4. Option D

Answer(s): C

Explanation:

Option C is the correct configuration to ensure that APs will work properly. It uses the ap command to configure a port profile for APs with VLAN 100 as the native VLAN and VLAN 200 and 300 as tagged VLANs. It also enables LLDP on the ports to discover the APs and assign them to the port profile automatically. The other options are incorrect because they either do not use the ap command, do not enable LLDP, or do not configure the VLANs correctly.


Reference:

https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch02.html https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch03.html



Page 1 of 30



Post your Comments and Discuss HP HPE7-A01 exam with other Community members:

Anonymous 2/26/2024 8:05:22 AM
Helpful so far
Anonymous
upvote

Anonymous User 2/26/2024 6:37:38 AM
Are these actual exam questions? They seem way too easy
Anonymous
upvote

Sandu 2/26/2024 4:42:43 AM
scalable expenditure model
Anonymous
upvote

Mirza 2/26/2024 3:21:50 AM
working on these dumps to get ready for PCNSE Exam.. hope they help me out .
Anonymous
upvote

taz 2/25/2024 8:17:33 PM
Q73 IS C) Define requirements architecture
Anonymous
upvote

Guy 2/25/2024 7:29:51 PM
Thank you for providing this service. I had to pay for the PDF version as I like to print and study. The PDF questions are well formatted.
IRELAND
upvote

Darshan 2/25/2024 10:49:28 AM
Good Questions
Anonymous
upvote

Arman 2/25/2024 6:37:15 AM
It is safe to say that this exam dumps is quite helpful. But for me to take full advantage I bought the PDF version which came with a free Test Engine Software. That was pretty useful and less boring to study. I got a passing mark.
Anonymous
upvote

Taz 2/25/2024 4:48:53 AM
Question 24 A - Interface Analysis
Anonymous
upvote

Tarun 2/25/2024 4:42:32 AM
Question 20 is C Interface analysis and interviews
Anonymous
upvote