Huawei H11-811 Exam Prep
Huawei Certified Network Associate - Unified Communication (Page 15 )

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• Run the backup with WITH CHECKSUM
• Store the backup on an SMB network share

sql 
BACKUP DATABASE DB1 
TO DISK = '\\FileServer\SqlBackups\DB1_full.bak' 
WITH CHECKSUM;

• DMS does not create the SQL Server backups for you.
• You must provide a valid full database backup.
• You must continue taking transaction log backups while the source database remains online.
• The full backup and subsequent log backups must be available in the SMB share that DMS can access.
• WITH CHECKSUM enables backup checksum validation, helping detect backup corruption.

• B. Versioned configuration files — Infrastructure is defined in machine-readable files and tracked in version control, allowing repeatable provisioning and change history.
• D. Docker files — Assuming “Doctor files” is a typo for Dockerfiles, a Dockerfile declaratively defines how to build a container image and is commonly considered infrastructure/configuration as code.

• A. Cloned virtual machine images — These are prebuilt infrastructure artifacts, but cloning an image is not itself a code-based infrastructure definition.
• C. Change management database records — A CMDB records information about infrastructure; it does not define or provision that infrastructure.

• B — The most significant risks are held by SQ.

• C — SQ should recognise the cars as inventory.

• F — SQ recognises revenue when LM sells a car to a third party.

• A: LM does not hold the most significant risks.
• D: LM does not recognise the cars as inventory.
• E: SQ should not recognise revenue when cars are merely delivered to LM.

• VLAN 10 for data
• VLAN 20 for voice

• A: Describes physical trunking or logical switch ports, not an SVI.
• B: An SVI can provide management access, but that is only one use—not the best description here.
• D: SVI use is not related to running out of physical ports.

• Instant messaging/chat: Can be abused to send malicious links or attachments, but is not the answer most directly associated with high-risk file sharing.
• E-mail: A common malware delivery method, but the question emphasizes an application type known for direct file exchange.
• End-to-end applications: This describes communication protection or architecture, not a specific malware distribution risk.

• SAML (Security Assertion Markup Language): Commonly used for enterprise SSO between an identity provider and cloud applications. It sends signed authentication assertions to the service provider.
• RADIUS: Primarily used for centralized authentication to network devices, VPNs, and wireless networks.
• EAP: An authentication framework commonly used with network access technologies; it is not typically the SSO protocol for SaaS applications.
• OpenID: Related to identity authentication, but traditional enterprise SSO questions involving cloud applications generally expect SAML. OpenID Connect is a newer authentication layer built on OAuth 2.0.

• Delete the City column
• Remove duplicates from the Country column

1. ???? City ??? ????? ?? ???? ?????? ???? ?????.
2. ???? ???? Country ?????? Remove duplicates ?????? ??? ?? ???? ??? ?????.

• A Screen Flow can present a form that inspectors complete and submit on an Experience Cloud page.
• It can collect inspection findings, validate the input, and create or update records.
• An Autolaunched Flow has no user interface, so it cannot directly provide the form.
• A Related List only displays related records, and Record Detail is primarily for viewing or editing an existing record—not for a custom inspection submission form.

• Lower order numbers appear first.
• For example, a variable with order 100 appears before one with order 200.
• The Sequence field is not the control used for catalog variable display order.
• The Default Value sets a value, not placement.
• The Choice field defines selectable options, not the variable’s position.

• Low: Applies system, tenant, and user-based suppressions. Activity from locations commonly used by that user is more likely to be suppressed.
• Medium: Applies system and user suppressions.
• High: Applies only system suppressions, so more unusual-location activity generates alerts.

• File1 contains the evaluation configuration—for example, evaluators, test data, thresholds, or evaluation parameters.
• The GitHub Actions workflow must reference that file through the evaluation-config input so the action knows which evaluation to run.
• project-endpoint identifies the Microsoft Foundry project, but it does not identify the evaluation definition. It is also typically required, but it does not answer the specific requirement about using File1.

• Scale out during the hours when customer traffic is high.
• Scale in during low-demand periods, reducing instance-hours and cost.
• Use scaling policies based on metrics such as CPU utilization or request count.

• Multiple Availability Zones: Improves availability and fault tolerance, but does not automatically reduce cost.
• Placement group: Helps with specialized performance or low-latency requirements, not cost optimization.
• Private subnets: Improve network security, but do not automatically adjust capacity or reduce EC2 usage costs.

• Suspended an operator who correctly refused to use unsafe equipment.
• Rewarded another operator for using the equipment despite the broken safety guard.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — This factory’s safety record is likely to be poor.

• Crowd-sourced evaluation: Requires recruiting and managing many evaluators.
• Human-worker evaluation: Provides human judgment but requires coordination, labeling instructions, and quality control.
• RLHF: Is a training and alignment process, not simply a low-overhead model comparison method.
• Automatic model evaluation: Quickly evaluates outputs using predefined toxicity or quality metrics with minimal manual effort.

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

• Products ? OrderHistory: Products is 1, OrderHistory is many (1:*)

• Date ? OrderHistory: Date is 1, OrderHistory is many (1:*)

• Authentication: Verifies who the user is.
• Authorization: Determines what the authenticated user is allowed to access.
• Accounting: Records activity such as login times and resource usage.

• CIA: Confidentiality, integrity, and availability—the three core security goals.
• ACL: Access Control List, which defines permitted or denied traffic or access.
• PEM: A certificate and key encoding format, not the primary function of RADIUS.

• Penetration test: Tests for exploitable vulnerabilities; it does not provide a broad opinion on whether security controls operate effectively.
• Annual self-assessment: Not independent, so it provides less assurance.
• Allow each client the right to audit: Inefficient because every customer may conduct a separate audit, creating duplicated effort and disruption.

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer attacks

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and transport protocols; it cannot deeply inspect web application content.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specifically designed to protect web applications.
• UTM: Combines several security functions in one appliance, but it is not the most targeted solution for a web portal.

• A: Build a custom API — possible, but unnecessary as the primary solution and potentially more costly to develop and maintain.
• B: Use pre-built chatbots — these generally answer questions but may not support the required custom workflow and real-time actions.
• C: Fine-tune with sample data — improves model behavior but does not provide live database access.
• D: Google Cloud databases + Vertex AI — stores current inventory data and lets an AI agent retrieve it and take actions based on up-to-date information.

• Which host first communicated with the suspected malicious source
• Whether that host initiated suspicious traffic or merely received it
• Which other hosts show evidence of infection, such as connections from the originating host
• Which hosts have no related suspicious activity and are therefore clean

• An outbound connection to a suspicious external address
• A downloaded or executed malicious file
• Later lateral connections from that host to other internal systems
• Firewall logs showing the direction and timing of the traffic

• Complete MFA, or
• Securely change their password

• Identity Protection: evaluates user and sign-in risk and can trigger remediation.
• Privileged Identity Management (PIM): manages temporary, just-in-time access to privileged roles; it does not automatically require password changes for risky sign-ins.

Manager role

DAX 
Country[Manager] = USERPRINCIPALNAME()

• Sales
• Human Resources

CFO role

• See sales for all countries
• See no Human Resources data

• Do not restrict the Country table or Sales table.
• Apply a filter to Human Resources that always returns false, such as:

DAX 
FALSE()

• Third-party attestation: Provides independent validation, but is typically periodic and performed by an external party.
• Penetration testing: Simulates attacks to identify exploitable vulnerabilities; it does not primarily track compliance.
• Vulnerability scans: Identify technical weaknesses, but do not provide a detailed review of procedures or compliance activities.

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• Case Assignment Rules normalmente são avaliadas quando o caso é criado. Elas podem ser executadas novamente em uma edição somente se o usuário marcar “Assign using active assignment rules”; isso não acontece automaticamente apenas porque o caso foi fechado.
• Portanto, criar uma regra de atribuição não corrige os centenas de casos já fechados e não garante, por si só, que um caso será transferido antes de ser fechado.

• B — Usar uma ferramenta de dados: corrige os registros históricos já existentes, atualizando o Owner.
• D — Criar uma regra de validação: impede que um caso seja fechado enquanto ainda pertence a uma fila. Exemplo conceitual: se Status = Closed e o proprietário for uma fila, bloquear o salvamento.

• Annual interest payments net of tax relief (A): future cash outflows for the issuer.
• Redemption value (B): the final cash outflow when the bond is redeemed.
• Market value now (C): the cash proceeds received now, acting as the initial cash flow in the IRR calculation.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• API tool matcher: runs a deterministic normalization command after the API tool returns.
• Write/Edit matcher: checks whether the target path begins with src/api/ and runs the linter.

json 
{ 
  "hooks": { 
    "PostToolUse": [ 
      { 
        "matcher": "api_tool", 
        "hooks": [ 
          { "type": "command", "command": "normalize-to-snake-case" } 
        ] 
      }, 
      { 
        "matcher": "Write|Edit", 
        "hooks": [ 
          { "type": "command", "command": "lint-if-under-src-api" } 
        ] 
      } 
    ] 
  } 
}

• GPS coordinates
• Date and time the image was taken
• Camera or device information
• Image dimensions and software used

• Log data: Records generated by systems or applications, not normally embedded in image files.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification, not the specific type of information being extracted.

• A: Not expanding would increase its dependence.
• B: More business from the same corporation would make dependence worse.
• D: Passing work to other minority businesses does not solve its own dependence.
• E: The passage does not suggest that it can force or influence the corporation to give work to others.

• IaaS: You deploy and manage virtual machines, including the operating system and installed software. Azure manages the physical datacenter, hosts, and networking infrastructure.
• PaaS: Azure manages the infrastructure and operating system, while you deploy and manage your application code. Examples include Azure App Service and Azure Functions.

• Verifies the sender’s identity using their private key.
• Confirms the transaction was not altered after signing.
• Provides evidence that the signer approved or originated the transaction.

• Digital certificates: Bind an identity to a public key, but do not themselves prove that a specific transaction was signed.
• Encrypted passwords: Protect confidentiality or authentication, but generally do not provide transaction-level nonrepudiation.
• One-time passwords: Authenticate a user for a session or transaction, but usually do not provide durable proof of who authorized the electronic record.

• Installing software
• Applying configuration changes
• Calling PowerShell scripts
• Running setup or customization commands

cmd 
powershell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

• GPO logon script: Runs only when a user logs on and depends on domain/GPO processing.
• GPO startup script: Runs during startup, but requires the VM to be domain joined and receives the applicable GPO.
• Place scripts in a VHD: Merely makes the scripts available; it does not automatically execute them.

• Filtering harmful or inappropriate content
• Blocking specified topics
• Detecting and masking sensitive information
• Enforcing content policies suitable for children

• Amazon Rekognition analyzes images and videos; it does not control text generated by a language model.
• Amazon Bedrock playgrounds are for testing models and prompts, not enforcing production safety policies.
• Agents for Amazon Bedrock help models complete tasks and use tools; they do not primarily provide content-safety controls.

• A script of cloud CLI commands: IaC because the commands can be saved, reviewed, versioned, and rerun consistently.
• Manually run curl commands: Not necessarily IaC; they are manual actions unless organized into an automated script.
• A sequence of REST requests passed to an API: Could represent automation, but the wording does not explicitly say they are stored and executed as reusable code.
• Commands entered into a cloud console: Manual operation, not IaC.

• Existing measures
• Relationships
• Calculated columns
• Tables and fields
• Existing transformations in the model

• SharePoint folder: Reconnects to the source files. You would likely need to recreate the model and measures.
• Power BI dataflows: Primarily provide reusable data preparation and storage, but they do not automatically provide the existing semantic model and measures.
• Excel workbook: Connects directly to the source file and would also require rebuilding the model and measures.

Correct reasoning

• Create storage5 as a General-purpose v2 (StorageV2) account.
• Configure Blob object replication from storage5 to an existing compatible storage account.
• The destination must support object replication—typically another StorageV2 or premium block blob account.
• Blob versioning must be enabled on both accounts.
• Blob change feed must be enabled on the source account.
• The accounts must meet Azure’s object-replication requirements, including being in supported regions and having compatible configuration.

• Self-signed certificate: Causes a browser security warning, not incorrect name resolution.
• Nameserver record: A DNS problem would typically affect multiple users, not just one workstation.
• IP helper: Relays services such as DHCP across network segments; it does not resolve website names.

• Share files with the wrong people
• Use public links unnecessarily
• Fail to classify sensitive data
• Upload data to unauthorized services
• Misunderstand company sharing policies

• A — Step-up authentication: Helps protect administrator accounts, but does not directly address improper file sharing by users.
• C — Password complexity: Helps reduce password attacks, not accidental data disclosure.
• D — Mobile device management: Secures managed mobile devices, but does not directly control file-sharing behavior across the organization.

• S3 Glacier Deep Archive is designed for long-term archival data with very infrequent access and has a lower storage cost than S3 One Zone-IA.
• The documents are copies stored elsewhere, so reduced availability and delayed retrieval are acceptable.
• An S3 interface VPC endpoint allows private access from the VPC without exposing the bucket through the public internet.
• A bucket policy can restrict access to requests coming through that endpoint.

• The selling division receives a credit based on a favourable transfer price, often market price or full cost plus a profit margin.
• The receiving division is charged a lower amount, such as marginal cost or another agreed price.
• The difference is accounted for centrally by head office or a corporate adjustment.

• Lead investigator: Coordinates the investigation and directs the response.
• Information security representative: Provides security expertise and helps assess the incident.
• Technical representative: Preserves system evidence, takes forensic backups, and supports technical analysis.
• Legal representative: Advises on legal, regulatory, privacy, and evidence-handling requirements.

• One network address
• Two usable host addresses—one for each router
• One broadcast address

• Router A: 10.2.1.1
• Router B: 10.2.1.2

• Design Studio > Emails ? create an email-template folder
• Design Studio > Landing Pages ? create a landing-page-template folder
• Add the relevant assets to each folder
• Right-click the folder and choose Share Folder
• Select the destination workspaces

• Enforce organizational rules, such as allowed regions or required tags
• Audit resources for compliance
• Deny noncompliant deployments
• Aggregate compliance results across subscriptions

• JobTitle: User1 and User3 only
• UsageLocation: User1, User2, and User3

• For a user whose source of authority is Windows Server Active Directory, attributes such as JobTitle are synchronized to Microsoft Entra ID. You must change them in on-premises AD; editing them in Entra ID is not allowed or will be overwritten.
• UsageLocation is a cloud-managed attribute used mainly for licensing and service availability. It can be set or changed in Microsoft Entra ID, including for synchronized users.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Moving the risk’s financial impact to a third party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity that creates the risk.

• Streams — track change data for tables or views.
• External tables — reference data stored in an external cloud storage location.

• Role — account-level security object.
• Warehouse — account-level compute resource.
• User — account-level security object.
• Share — account-level object used to share data.