Huawei H11-828 Exam Prep
Huawei Certified Network Professional- Unified Communication (HCNP-UC) (Page 15 )

• CCTV system — Detective control: Cameras monitor and record activity, helping identify or investigate security incidents after—or while—they occur.
• Signs about being filmed — Deterrent control: The signs discourage people from attempting unauthorized or criminal activity because they know surveillance is present.

• Preventive: Stops an incident from occurring, such as a lock or access-control system.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: Provides an alternative control when the preferred control cannot be implemented.

• Compare each server’s drive specifications and performance data.
• Identify the drive that is faulty, slow, or mismatched.
• Replace it with a drive that matches the required interface, capacity, and performance characteristics.
• Avoid selecting a slower drive, because storage performance can bottleneck the entire server.
• In a redundant array, use a compatible replacement so rebuilding does not create unnecessary performance degradation.

• Restrict a port to a defined number of MAC addresses
• Use statically assigned or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious network activity, but is not the primary control for limiting switch MAC entries.
• NGFW: Filters traffic at the network boundary; it does not directly prevent MAC table flooding on access switches.

• Accept: Acknowledge the risk and choose not to take additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or condition that creates the risk.

• Internal interface ? connected toward the corporate network/internal firewall
• External interface ? connected toward the Internet-facing firewall

1. A route for the internal corporate network through the internal-facing interface/firewall.
2. A default route (0.0.0.0/0) through the Internet-facing interface/firewall.

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

1. Create or verify cost groups

1. Set up the item model group

1. Create the costing version

1. Enter or calculate item costs

1. Activate the standard costs

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

• Career enhancement — A mentor can provide guidance, advice, networking support and help the mentee identify career opportunities.
• Support with new challenges — A mentor can help the mentee think through unfamiliar situations and develop confidence and practical solutions.
• Personal development — Mentoring can improve skills such as communication, leadership, decision-making and self-awareness.

• Solving all problems — The mentor supports and guides the mentee but should not take responsibility for solving every problem.
• Discipline would be dispensed if they make a mistake — Mentoring does not remove normal accountability or workplace consequences. Mistakes should instead become learning opportunities.

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the primary control for switch-port MAC learning.
• NGFW: Protects at network boundaries but does not directly limit MAC addresses learned on access ports.

• Customer: Dual
• Date: Dual
• Sales: DirectQuery
• SalesAggregate: Import

• Sales – DirectQuery: Near-real-time data should not rely on an imported cache. DirectQuery sends queries to the source when visuals are loaded, allowing recent sales data to appear.
• SalesAggregate – Import: A weekly refresh is sufficient, and imported data generally gives faster visual performance because it is stored in Power BI’s in-memory cache.
• Customer and Date – Dual: These are dimension tables used with both the DirectQuery Sales table and the imported SalesAggregate table. Dual allows Power BI to use cached data when possible, while still behaving appropriately in queries involving DirectQuery data. This can improve performance and reduce unnecessary limited relationships.

• Laws and regulations
• Litigation holds
• Industry or contractual obligations
• Tax, financial, health, or privacy requirements

• Business strategy and direction: May influence retention, but cannot override legal requirements.
• Storage capacity and longevity: Practical considerations, not the primary driver.
• Business ease and value analysis: May support decisions after compliance obligations are identified.

• Future costs — Only costs occurring in the future can be affected by the investment decision. Past costs are sunk and irrelevant.
• Incremental costs — These are additional costs caused by choosing the investment. They are relevant because they differ between alternatives.
• Cash flows — Capital investment decisions are based on future cash inflows and outflows, usually discounted to present value.

• Committed costs have already been agreed or incurred and generally cannot be changed by the decision.
• Unavoidable costs will arise regardless of which option is selected, so they do not affect the choice.

• Inherent risk: Risk that exists before controls are implemented.
• Avoided risk: Risk eliminated by choosing not to perform the risky activity.
• Operational risk: Risk arising from failures in processes, people, systems, or daily operations.

• Employees can use approved devices from remote locations or worldwide offices.
• Users do not need to carry or insert extra hardware.
• It helps prevent account takeovers from unknown devices.

• Geotagging: Restricts access based on location, which could interfere with remote work and travel.
• Smart cards: Require additional physical equipment and card readers.
• Time-based logins: Limit access according to time but do not strongly bind access to an authorized user device.

1. Clear principles and boundaries — Employees have freedom, but decisions must remain within clear organizational values, policies and limits.
2. High degree of freedom — Managers are trusted to make decisions rather than seeking continual approval from senior management.
3. Frontline customer responsibility — Customer-facing managers should be empowered to manage customer relationships and respond quickly to needs.
4. Transparent and ethical information — Information should be openly available and used honestly, supporting trust and informed decision-making.

• Customers may boycott V’s products.
• Supermarket customers may stop buying from V.
• Investors may view V as having higher legal, ethical and reputational risk.
• V could face fines, lawsuits, contract losses and higher costs.
• Expected future profits may fall.

• Sets a high initial price for a new product.
• Targets customers willing to pay more, often called early adopters.
• Gradually reduces the price to attract more price-sensitive customers as the product becomes less novel and competition increases.

• Penetration pricing: starts with a low price to gain market share quickly.
• Premium pricing: maintains a high price to communicate superior quality or status; it does not necessarily involve later price reductions.
• Loss leader pricing: sells one product at a very low price, sometimes below cost, to attract customers who may buy other products.

• Group1 — security-enabled: Eligible.
• Group2 — mail-enabled and security-enabled: Eligible because it is still a security group.
• Group3 — Microsoft 365 group: Not eligible for group-based licensing.
• Group4 — Microsoft 365 group, not security-enabled: Not eligible.

• desktopwidth:i:1280
• desktopheight:i:1024

• Connection information: Controls connection-related settings, not the desktop resolution.
• Scaling plan: Controls when session hosts start, stop, or scale based on demand.
• Session behaviour: Controls behavior such as disconnect or logoff handling.
• Display settings: Specifically controls RDP display properties, making it the appropriate choice.

• Limiting the number of MAC addresses allowed on a switch port
• Restricting ports to specific known MAC addresses
• Taking an action—such as dropping frames or shutting down the port—when the limit is exceeded

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but is not the primary control for switch-port MAC limits.
• NGFW: Filters network traffic at the firewall, but does not directly control MAC addresses learned by a switch.

• Azure Resource Manager (ARM) templates define the virtual machines and related Azure resources declaratively. You can deploy the same template repeatedly, ensuring consistent VM sizes, networking, storage, extensions, and other infrastructure settings.

• PowerShell DSC extension applies and maintains the required Windows configuration inside each VM. DSC is state-based: if a setting changes or becomes incorrect, DSC can bring it back to the desired configuration.

• Azure Pipelines deployment groups organize deployment targets, but they do not primarily enforce ongoing VM configuration.
• Custom Script Extension runs setup scripts, but it is generally less maintainable and does not continuously enforce configuration like DSC.
• Pipeline stage templates reuse pipeline workflow definitions; they do not configure the VMs themselves.

• Transport and handling
• Storage and warehousing
• Refrigeration
• Shelf-stacking or replenishment
• Other costs directly attributable to product P

• Record changes — a flow can start when a record is updated or otherwise changes.
• Schedules — a flow can run at a specified date/time or on a schedule.
• Record inserts — a flow can start when a new record is created.

• Subflows are reusable flow components called by another flow; they are not normally trigger types.
• Record views do not generally initiate a Flow Designer flow.

• B. Deploy to a SageMaker endpoint: This is needed for SageMaker-hosted models, not for a model intended to be used directly in Amazon Bedrock.
• C. Register with SageMaker Model Registry: SageMaker Model Registry is unrelated to invoking custom models in Bedrock.
• D. Grant access in Bedrock: Access permissions may be necessary, but they do not replace the required provisioned capacity.

• ARP poisoning: Redirects or intercepts local network traffic; monitoring would typically show suspicious ARP changes or man-in-the-middle behavior.
• Jamming: Interferes with wireless or radio signals. It would affect connectivity, not usually show a server-specific overload.
• Kerberoasting: Attempts to obtain and crack Kerberos service-account hashes; it does not normally cause a system outage.

• Fileless malware: Nothing in the command indicates malware executing only in memory.
• Living-off-the-land binaries: Mimikatz is a credential-access tool, not a normal system utility used for LOLBin abuse.
• Social engineering: The command shows technical credential abuse, not manipulation of an accountant.

apex 
for (Account updatedAccount : Trigger.new) { 
    AccountTriggerHelper.notinyxternalSystem(updatedAccount.Id); 
}

• Too many callouts: The callout occurs asynchronously in the future method, and each future transaction can perform its permitted callouts.
• Too many SOQL queries: The SOQL query is inside the future execution, not repeatedly in the trigger transaction.
• Callout from triggers not supported: Direct callouts from triggers are prohibited, but the trigger delegates the callout to asynchronous Apex, which is the correct pattern.

• Which host first communicated with the suspected malicious source
• Whether that host initiated suspicious traffic or merely received it
• Which other hosts show evidence of infection, such as connections from the originating host
• Which hosts have no related suspicious activity and are therefore clean

• An outbound connection to a suspicious external address
• A downloaded or executed malicious file
• Later lateral connections from that host to other internal systems
• Firewall logs showing the direction and timing of the traffic

1. Identify the fact table

• Records something that happened, such as a sale, test, appointment, or measurement
• Contains foreign keys to other tables
• Contains measures or numeric results
• Has many rows

2. Identify a dimension table

• Describe people, products, dates, locations, or departments
• Contain descriptive columns
• Are referenced by the fact table
• Have fewer rows than the fact table

3. Identify the surrogate key

• System-generated
• Unique within the dimension
• Often named PatientKey, CustomerKey, or similar
• Usually an integer
• Not meaningful outside the model

• Create and manage approved IT services as products
• Control which users can deploy those products
• Apply governance, permissions, and constraints
• Use and manage infrastructure-as-code templates, such as AWS CloudFormation templates

• AWS Resource Explorer: Helps find and browse AWS resources; it does not govern IaC deployments.
• AWS Organizations: Manages accounts, consolidated billing, and organization-wide policies.
• AWS Systems Manager: Provides operational management, such as patching, automation, and parameter storage, but it is not primarily used to catalog and govern IaC-based service deployments.

• 255.255.255.128 = /25: 128 total, 126 usable
• 255.255.255.192 = /26: 64 total, 62 usable
• 255.255.255.224 = /27: 32 total, 30 usable
• 255.255.255.240 = /28: 16 total, 14 usable

• One for the network address
• One for the broadcast address

• 8 total addresses
• 6 usable addresses
• Mask: 255.255.255.248

• How quickly the vendor must respond to an incident or request
• Target resolution times
• Availability or uptime requirements
• Performance metrics and penalties for not meeting them

• SOW (Statement of Work): Describes the project’s scope, tasks, deliverables, and timeline.
• MOA (Memorandum of Agreement): Documents a formal agreement to cooperate or perform specific activities.
• MOU (Memorandum of Understanding): Records a mutual understanding or intent, often less binding than a contract.

• HTTPS: Secure web traffic, not general command-line server administration.
• SNMPv3: Secure network monitoring and management, not interactive server login.
• RDP: Provides graphical remote desktop access. It can be secure, but it is not the direct replacement for Telnet in this scenario.
• SMTP: Used to send email.

• Economy: Obtaining inputs at the lowest appropriate cost.
• Efficiency: Making the best use of resources, such as staff, money, and equipment.
• Effectiveness: Achieving the intended objectives or outcomes.

• A. IDS attack signatures: Primarily detects suspicious network activity, not necessarily malware embedded in uploaded files.
• C. Load balancer: Improves availability and distributes traffic; it does not inspect documents for malware.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection, but its primary role is not scanning uploaded PDFs for malware.

• Works across SaaS and internal applications: TOTP is widely supported by authentication systems and can be integrated into many applications.
• Device manufacturer agnostic: A hardware token or authenticator application can generate the code without depending on a specific computer or phone manufacturer.
• Offline capability: The code is generated locally using a shared secret and the current time; an internet connection or cellular service is not required.

• Username and password: May work offline but provides weaker authentication and does not meet the intended improvement in security.
• Biometrics: Can depend on device hardware, operating-system support, and enrollment mechanisms.
• SMS verification: Requires cellular connectivity and is vulnerable to threats such as SIM swapping.

• Check whether the data is accurate, complete, and properly prepared.
• Confirm that the pattern is not caused by an outlier, data-quality problem, or modeling issue.
• If the data is valid, treat the result as a potentially valuable new business insight.

• A: A data scientist may help, but expert validation and data-quality checking come first.
• C: Filtering out inconvenient data risks hiding a valid insight.
• D: Einstein’s result should not be accepted without verification simply because it produced the finding.

• NIDS: Monitors network traffic for suspicious activity and network-based attacks targeting the application or its supporting services.
• HIPS: Protects an individual host by monitoring processes, files, and system activity. It can help secure the web server, but it is not focused specifically on the application’s network attack surface.
• SIEM: Aggregates and correlates logs; it does not directly prevent attacks.
• Honeypot: A decoy system, not the primary protection for a production web application.
• Certificate revocation list: Deals with certificate trust, not application exploitation.

• A — Capacity: The system must handle all current records and anticipated future records. A system that cannot cope with volume will quickly become ineffective.
• C — Accuracy: Academic records are critical, so the new system must be at least as accurate as the existing system and comparable systems. Poor accuracy could cause serious administrative and reputational problems.
• D — Integration: Linking with the university’s financial systems supports consistency and avoids duplicate data entry, especially for registration, deregistration and fee-related transactions.

• B — Parallel running: This is a useful implementation and risk-control technique, but it is not an essential feature of the system itself. It may also be expensive and time-consuming.
• E — Internet access for all information: This creates significant confidentiality and security risks. External access might be needed for selected services, but unrestricted access to all information is not essential and would be inappropriate for student records.

• Domain controllers, because the requirement specifically excludes them. However, note that both member servers and domain controllers run Windows Server, so OS targeting alone cannot distinguish them unless the targeting option allows selecting the relevant server role/version. In the usual exam interpretation, target the applicable server OS category.
• Client computers, because they run a client Windows operating system.

• Domain: Targets membership in a domain, not the computer’s operating-system type.
• Security Group: Would require creating and maintaining a group containing all member servers, increasing administrative effort.
• Environment Variable: Not designed to reliably identify member servers.

• The selling division receives a credit based on a favourable transfer price, often market price or full cost plus a profit margin.
• The receiving division is charged a lower amount, such as marginal cost or another agreed price.
• The difference is accounted for centrally by head office or a corporate adjustment.

text 
ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global 
ip route vrf Customer2 192.168.1.200 255.255.255.255 192.168.1.1 global 
ip route 192.168.1.0 255.255.255.0 Vlan10 
ip route 172.16.1.0 255.255.255.0 Vlan20

• The route in Customer1 VRF provides a path back to the Customer2 subnet, 172.16.1.0/24.
• The route in Customer2 VRF provides a path to the FTP server, 192.168.1.200.
• The keyword global tells the router to resolve the next hop using the global routing table, enabling controlled route leaking between the VRF and global table.
• The global routes identify the VLAN interfaces used to reach each customer network.

yaml 
clusterIP: None

• CronJob: Runs Jobs on a schedule and normally does not need stable networking.
• Deployment: Manages interchangeable, stateless replicas and usually uses a regular Service.
• DaemonSet: Runs a Pod on selected nodes but does not inherently require stable Pod identities.

• Guiding principles
• Governance
• Service value chain
• Practices
• Continual improvement

• Guiding principles: Recommendations that guide decisions and actions; they do not describe the entire system.
• Four dimensions: Perspectives used to ensure a balanced approach to service management.
• Service relationship: Describes cooperation between a service provider and service consumer, rather than the whole value-creation system.

• B. Users accessing Salesforce from public Wi-Fi

• C. Users choosing the same password as their Facebook password

• A: 2FA does not protect an already-authenticated, unlocked session if someone accesses an unattended laptop.
• D: Weak password-reset questions are an account-recovery weakness. 2FA primarily strengthens login authentication, not necessarily the security-question reset process.

• Due diligence: Investigating and evaluating a third party before entering into or continuing a business relationship.
• Attestation: An independent party provides assurance about an organization’s claims or controls. A SOC 2 examination is an example of an attestation engagement, but the analyst requesting and reviewing the report is performing due diligence.
• Internal audit: Reviews the organization’s own internal controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

1. Open the Microsoft Entra Connect wizard.
2. Select Configure.
3. Choose Customize synchronization options.
4. Authenticate when prompted.
5. On the Domain and OU filtering page, select:

1. Complete the wizard.

• Start-ADSyncSyncCycle only starts synchronization; it does not change which OUs are included.
• Manage federation configures federation settings, which are unrelated to OU filtering.
• Add-ADSyncConnectorAttributeInclusion concerns connector attributes, not selecting additional OUs for synchronization.